HTc LCD - Touch GSM General

hey....i have a problem with my htc elf it was working fine till it fell and now when i turn it on it shows white n black color horizontally....1 thing more the phone is working fine i mean after some time i can hear the intro music and even receive calls but no display.....so do i need to change the lcd
thnks

Yeah.. actually your digitizer has broken down not your touch screen.. Get it replaced..

gargashish0901 said:
Yeah.. u have to actually your digitizer has broken down not your touch screen.. Get it replaced..
Click to expand...
Click to collapse
cyber_02000 said:
hey....i have a problem with my htc elf it was working fine till it fell and now when i turn it on it shows white n black color horizontally....1 thing more the phone is working fine i mean after some time i can hear the intro music and even receive calls but no display.....so do i need to change the lcd
thnks
Click to expand...
Click to collapse
To clarify. It is your LCD that is broken, your digitiser may well be but as you can not see to test...
One way would be to hook it up to your pc, run mymobile, and see if pressing the digitiser registers the command when viewing it on mymobile.
Stu

thnx for the reply .......it does give a responce when i touch the screen ....i mean the lcd brightens up....!!! btw what is digitilizer..???

Digitizer is the thin screen above the LCD screen which recognises the stylus/finger touch (Analog) input into Digital Signals.

Related

Screen replacement

about 2 months ago my tytn screen cracked in the corner, i replaced the lcd screen
The touch sensor etc is fine backlight fine all fine, excpet the colours.
The colours are all wrong it doesnt look negative but there all wrong
I tried taking a picture from my other tytn
My question is, is it the LCD problem or is there some kind of hidden app for setting up the screen e.g. Windows Display properties
zMastaa said:
about 2 months ago my tytn screen cracked in the corner, i replaced the lcd screen
The touch sensor etc is fine backlight fine all fine, excpet the colours.
The colours are all wrong it doesnt look negative but there all wrong
I tried taking a picture from my other tytn
My question is, is it the LCD problem or is there some kind of hidden app for setting up the screen e.g. Windows Display properties
Click to expand...
Click to collapse
My guess, and it's only a guess, is that the ribbon cable is not fully inserted. I have seen reports that it needs a firm push into place and it is easy to think it's fully inserted when it isn't.
Mike
ok kool i will check it out now
Yeah that didnt work lol
Imma call for a another replacement but for now atleast its useable i guess
zMastaa said:
Yeah that didnt work lol
Imma call for a another replacement but for now atleast its useable i guess
Click to expand...
Click to collapse
What a bummer.
Mike

help my poor magician

hey
my magician falled from my hand
bat and bat cover droped off !
after i reattached them to my mag it made a hard rest but with no back light
it works fine now but now back light at all i went to settigns
and raised back light to top but no thing changed can any body help me plzzzzzzzzzz
dump :
now i detached the screen golden cable from main bored and reattached it back
now back light is fine but screen on blue first screen is white then more colored lines apears and then i see mobile 6 grean screan at the midle of screen but not clearly !
i repeat the process again but with the same result ?
give it to me... I need it for developing new FP
err... I think LCD is broken...
no lcd is not cracked or broken like it was !
khaledvic said:
no lcd is not cracked or broken like it was !
Click to expand...
Click to collapse
send it to me lah...
give me pic please...
LCD Connector damaged?
maybe but i don't think cuz its enter till it touch some thing inside the white adapter
then it enters frm one side only left or right but not both like there is som thing in !
opps i can't try couttula works any more !

Help please....

I was applying a Zagg Invisible Shield on my HD2 today and the only thing I can imagine is maybe I pressed too hard on the screen while squeegeeing the solution and now my touch screen is not working. Everything else is working fine, I can still answer calls using the buttons at the bottom but the touch screen is dead. Is there hopefully some kind of fix for this or am I SOL and need to replace the digitizer? Thanks in advance.
11PCX said:
I was applying a Zagg Invisible Shield on my HD2 today and the only thing I can imagine is maybe I pressed too hard on the screen while squeegeeing the solution and now my touch screen is not working. Everything else is working fine, I can still answer calls using the buttons at the bottom but the touch screen is dead. Is there hopefully some kind of fix for this or am I SOL and need to replace the digitizer? Thanks in advance.
Click to expand...
Click to collapse
may be your pressing hard has broken the connection or has caused a loose connection between the digitizer and the flex cable/ribbon.
if your good in DIY may be you can dismantle and fix it..
if not a repair shop is your option !
hope your screen works again !
Thank you sir but very fortunately it started working again.
U R a lucky dog.hah...Press Ur display quitely in next time.

HTC DESIRE HD not turn on after replacement touch screen

Hi, I am have this device HTC DESIRE HD. This device not turn on after replacement touch screen. after pressing the power button is activated vibrator, but the display does not light up. Please help me
Did you replace the touchscreen by yourself?
Dismantle it again and check LCD connector.
Spakainz said:
Dismantle it again and check LCD connector.
Click to expand...
Click to collapse
I have already used these methods
is the new screen ok
are you sure that your new screen isn't broken too.
I think that it's not the screen, although the phone to vibrate a few times
disconnect digitizer ribbon and see if lcd turns on.

[Q] New screen not working after replacement

Hi all,
I had a touchscreen issue (sometimes not working) in my HD2 so I ordered a new fabric screen+lcd assemby. I replaced it very carefully but now when I plug new lcd it is not working. Phone is working, buttons, vibration, hear the sound when turning on but there is only backlight on display and just shows black screen. I am sure that display is ok because I tried to put old one (wich was still working before replacement) and it has same issue (backlight works but display is black). Can you give me some ideas what is wrong ????
damaged lcd ribbon connector on mainboard or ribbon not being inserted fully or latched securely
Ty booting to bootloader ...
Help
The flex cable is not attached correctly or the main board is broken and before you close your phone try it. If you can't do this give someone your phone and he will recover for you.
The problem is sloved. I dissasambled all phone and fix it once again and now it works. Anyway I got another problem of white screen on my second device. Did anybody find a solution for white screen ever????
wojcimierz said:
The problem is sloved. I dissasambled all phone and fix it once again and now it works. Anyway I got another problem of white screen on my second device. Did anybody find a solution for white screen ever????
Click to expand...
Click to collapse
Have you tried turning phone on with volume down button pressed???
You should see 4 colors. Try this. I search for you.
http://forum.xda-developers.com/showthread.php?t=2263026
try with this link.
Yes I have read this before but I think that white screen problem is not sloved in this thread. But maybe I could be wrong.

Categories

Resources