I was applying a Zagg Invisible Shield on my HD2 today and the only thing I can imagine is maybe I pressed too hard on the screen while squeegeeing the solution and now my touch screen is not working. Everything else is working fine, I can still answer calls using the buttons at the bottom but the touch screen is dead. Is there hopefully some kind of fix for this or am I SOL and need to replace the digitizer? Thanks in advance.
11PCX said:
I was applying a Zagg Invisible Shield on my HD2 today and the only thing I can imagine is maybe I pressed too hard on the screen while squeegeeing the solution and now my touch screen is not working. Everything else is working fine, I can still answer calls using the buttons at the bottom but the touch screen is dead. Is there hopefully some kind of fix for this or am I SOL and need to replace the digitizer? Thanks in advance.
Click to expand...
Click to collapse
may be your pressing hard has broken the connection or has caused a loose connection between the digitizer and the flex cable/ribbon.
if your good in DIY may be you can dismantle and fix it..
if not a repair shop is your option !
hope your screen works again !
Thank you sir but very fortunately it started working again.
U R a lucky dog.hah...Press Ur display quitely in next time.
Related
hello i have a problem with the touch screen...sometimes the touch didn't function corretly and seems to be disalligned.i've alredy tried to fix the problem with a hw reset and with the allignment option but nothing happend.anyone know how to fix the problem?
sorry for my bad english....
Try using the touchscreen again while pinching/squeezing the back and front of the phone together on the left hand side of the phone. Does it work as normal doing this?
yes it's work but i must doing a very high pression and when i relese the touch screen didn't function.
Same happened to my Prophet, all of a sudden the touchscreen failed.
IF ITS STILL UNDER WARRANTY SEND IT BACK FOR REPAIRS OR REPLACEMENT. Otherwise try cut an old credit card in half and place one half between the battery and back cover of the phone. This will preform the same function as if you were squeezing the phone like you did before (except hands free).
Dust
Look for small pieces of dust between the digitizer and the chassis, this can disalign the screen too.
I cracked the Digitizer on my Aria and spent the past few hours replacing it. Upon boot, the LCD works fine as well as all hardware buttons, however now the touch does not work, I can press VERY hard on the screen and it kind of works, but for normal touches it does not. I was wondering what you guys thought, could it be a connection issue with the flex cable or a hardware issue with the Digitizer. I don't know if it matters, but there is also a slight gap between the Digitizer and the Body of phone now. Thanks.
David.
david2777 said:
I cracked the Digitizer on my Aria and spent the past few hours replacing it. Upon boot, the LCD works fine as well as all hardware buttons, however now the touch does not work, I can press VERY hard on the screen and it kind of works, but for normal touches it does not. I was wondering what you guys thought, could it be a connection issue with the flex cable or a hardware issue with the Digitizer. I don't know if it matters, but there is also a slight gap between the Digitizer and the Body of phone now. Thanks.
David.
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=SwomVNUtCm0
I watched that video and another to change it. The problem is now that I changed it, it's now unresponsive. It worked before with cracks. I think it may be defective and I plan on emailing the company I got it from tonight.
Nevermind
Figured it out. For some reason HTC made the phone lock the screen anytime the Proximity Sensor is covered. Kinda weird, considering my SGS only locks when on the phone app, but yeah, if anyone else has this problem, make sure the Proximity Sensor is lined up correctly with the holes for it in the glass.
hay guys finaly got my screen for my HD2 i did buy a LCD with the digitizer attached but now the touch dont seem to work at all any ideas any help would be great thank you just found another issue when i go in to Nand i cant select any thing like USB flasher AD recovery or even reboot phone the buttons just dont want to work in it but they work by chance if the power button was busted would it screw the touch screen up and the rest ?
just answered one of my Q's touch screen still dont work even with the buttons unplugged
and after a closer look aparently the LCD Back light is allways on soo im just wondering is it the new screen + digitizer or is it the phone ? a replie would be nice
thx
Yesterday I was working on my HTC HD2, flashed WP7 Mango on it, and opened it again to align the plastic keys with the hardware keys undeneath. It didn’t really work out, so I carefully seperated the digitizer from the display to realign theglass abovethe keys. Now The keys work perfectly, but the screen doesn’t react anymore. I have no clue what could’ve went wrong, the digitzer flex cable is still perfect, aswell are the others which connect the screen to the motherboard. Anyone have a clue what could’ve went wrong? I hope it can get fixed easily
I’ll try to hold the ‘end call key’ while using the display. Seems like that will help to entight the connection.
Fix: So I took the Display out again and checked the connection of the digitizer at the back of the screen. It was loose. So i've put it in place and fixed the connection with some extra tape.
Hi all,
I had a touchscreen issue (sometimes not working) in my HD2 so I ordered a new fabric screen+lcd assemby. I replaced it very carefully but now when I plug new lcd it is not working. Phone is working, buttons, vibration, hear the sound when turning on but there is only backlight on display and just shows black screen. I am sure that display is ok because I tried to put old one (wich was still working before replacement) and it has same issue (backlight works but display is black). Can you give me some ideas what is wrong ????
damaged lcd ribbon connector on mainboard or ribbon not being inserted fully or latched securely
Ty booting to bootloader ...
Help
The flex cable is not attached correctly or the main board is broken and before you close your phone try it. If you can't do this give someone your phone and he will recover for you.
The problem is sloved. I dissasambled all phone and fix it once again and now it works. Anyway I got another problem of white screen on my second device. Did anybody find a solution for white screen ever????
wojcimierz said:
The problem is sloved. I dissasambled all phone and fix it once again and now it works. Anyway I got another problem of white screen on my second device. Did anybody find a solution for white screen ever????
Click to expand...
Click to collapse
Have you tried turning phone on with volume down button pressed???
You should see 4 colors. Try this. I search for you.
http://forum.xda-developers.com/showthread.php?t=2263026
try with this link.
Yes I have read this before but I think that white screen problem is not sloved in this thread. But maybe I could be wrong.