I'm having multiple problems with my Titan. I've re-flashed the ROM to the default WinMo 6.1 and that didn't help.
Can't hear through speaker; only speakerphone
Wi-Fi doesn't turn on via switch or option in Settings
When the keyboard is open, the screen freezes and doesn't rotate
Help!
Hard reset?
Related
Hi there!
I have a little problem:
I upgraded to the AKU2 and A2DP enabled Qtek ROM and since I got a German slide keyboard I wanted to switch the keyboard language using the common registry method.
However, every time I soft reset, the "Locale" key is gone and keyboard layout remains US.
Other registry changes (like using bt headsets for music) work just fine. I just can't seem to get the German keyboard layout running...
Anyone got an idea?
Thanks!
Are you sure you waited some time before soft resetting after changing the registry value.
To be sure you can turn the device off and on instead of soft resetting.
But it definitily still works in AKU2.
Yeah... that was the problem.
Thanks
Okay so I think I know at least A solution but I'm hoping that someone here will be able to suggest something besides a hard reset.
I've got a Cingular 8125 a couple of weeks ago. Flashed it to the latest imate rom. I kept it from installing the custom imate stuff but did install some of the Cingular cabs.
Now I'm having a few problems with the phone. It's quite a list.
A) I can't enable wifi at all. At one point I could but the phone locked up on me while I was trying to resetup my connection. I had no choice but to soft reset it. Now I can't enable wifi at all. If I click on it in the comm manager to turn it on it will sit there with the spinning wheel like it's enabling then go back to the same icon with the x on it. I've tried turning flight mode on and off, etc but nothing seems to help it.
B) the phone HAS been locking up. It will just sort of freeze and stop responding. Sometimes I'm able to get to the memory settings in control panel and still have available memory (it's usually been around 16 MB of program memory when this has occured) but even so closing everything will often not help. Even if it unfreezes then it will usually do so not much later and often it just won't unfreeze.
C) sometimes I can't close out the phone application. This seems to happen when Magic Button is running. I click to close it and it goes from the phone to my call history. Closing that goes back to the phone again. I can't get to the Today screen. Pressing the red hangup button would sometimes fix it but usually not.
D) voice command is REALLY wonky using my BT headset (Scala 500). Okay, I know it doesn't officially work with BT headsets and I could live with that. But why does it have to be so damned random?
1) Sometimes pressing the button once will get me the chime. Usually it just gets me a lower pitched tone. If the first press doesn't get it then typically a second within a short time will. Sometimes it takes three though.
2) At one point the phone would usually play my selected ringtone and announce the incoming call over the headset. Other times I would only get the default incoming call sound on the headset and the phone and voice command announcement are over the phone speakers instead. In the last couple of days I've ONLY been getting them from the phone.
3) While typically when I'm using the headset with voice command the feedback DOES come over the headset, sometimes it gives me the confirmations from the phone instead
I think there were a few other flaky issues too but this is the majority of them. Also many of them were present before the rom upgrade so I don't think it's responsible for most of it.
edit: oh, one other thing is that after the ROM upgrade I can't get the default input to stay on anything but keyboard. Even if I change it, I turn around and it's back to keyboard again. I'm thinking, though, that there's a reghack for this?
*bump*
===A) I can't enable wifi at all. At one point I could but the phone locked up on me while I was trying to resetup my connection. I had no choice but to soft reset it. Now I can't enable wifi at all. If I click on it in the comm manager to turn it on it will sit there with the spinning wheel like it's enabling then go back to the same icon with the x on it. I've tried turning flight mode on and off, etc but nothing seems to help it.==
I have the same problem with you. Can anybody help?
any solutions i have the same problem
Try this: back up your PIM, then flash phone back to OEM ROM (cingular, t-mobile, whatever it is for your model). Then unlock it again (if needed), and flash the ROM again. If it's still garbage, try reading the thread for the ROM you loaded (chances are you're not the first to experience this problem, and the other testers of that ROM may offer solutions). If it's still garbage after all that, consider using a different ROM altogether. CRacing's CR86 Touch HD and SVI's ANGEL are both quite nice, and VERY reliable for functionality.
Help! I downloaded Phonealarm from the net onto my xda mini s. after it installed on my xda it said to do a soft reset. now the screen stays off while the phone is on. i can recieve calls as normal but i cant use my phone in any other way as i cant see!
any help greatly appreciated
dug
I've used Phone alarm for a while and didn't had that problem. Are you sure it is not your backlight? I've fooled myself once or twice by turning the backlight off by accident, the hardware button that is. Press and holding the power button turns off and on your backlight while the display is still working. If otherwise then disregard this silly remark.
So its the screen totally switched off or the backlight? What happens if you sof-reset? if suppose you could see the splash screen, then it maybe like some software is causing the issue. Try connecting to active sync & remove any unwanted program from startup folder or you can even un-instsall from active sync.
Put simply ive disabled the vibration in the settings
whenever i use the keyboard, the phone vibrates
using artemis rom 5.5
any ideas?
perhaps this could be changed through the registry?
Every time that i made or receive a call, the disply becames inactive and the touch does not work even if the phone is not on the face, so it is imposible to use the end-call button or use the numeric pad
If I use a Headphones (wired), the display and the the touch became totally available.
I suspect that it could be a problem with the system that turn off the display when is near the face, but I don't how how to verify.
BTW the dialer is enable in HWA settings..
Best regards
Solution
taffy3 said:
Every time that i made or receive a call, the disply becames inactive and the touch does not work even if the phone is not on the face, so it is imposible to use the end-call button or use the numeric pad
If I use a Headphones (wired), the display and the the touch became totally available.
I suspect that it could be a problem with the system that turn off the display when is near the face, but I don't how how to verify.
BTW the dialer is enable in HWA settings..
Best regards
Click to expand...
Click to collapse
Here the solution
http: //youtu.be/uMk1S90MjbY