Put simply ive disabled the vibration in the settings
whenever i use the keyboard, the phone vibrates
using artemis rom 5.5
any ideas?
perhaps this could be changed through the registry?
Related
Help! I downloaded Phonealarm from the net onto my xda mini s. after it installed on my xda it said to do a soft reset. now the screen stays off while the phone is on. i can recieve calls as normal but i cant use my phone in any other way as i cant see!
any help greatly appreciated
dug
I've used Phone alarm for a while and didn't had that problem. Are you sure it is not your backlight? I've fooled myself once or twice by turning the backlight off by accident, the hardware button that is. Press and holding the power button turns off and on your backlight while the display is still working. If otherwise then disregard this silly remark.
So its the screen totally switched off or the backlight? What happens if you sof-reset? if suppose you could see the splash screen, then it maybe like some software is causing the issue. Try connecting to active sync & remove any unwanted program from startup folder or you can even un-instsall from active sync.
My TyTn doesn't vibrate anymore...
Yesterday it frooze while receiving a phonecall. It frooze so bad that it wouldn't even restart after a hardreset. After playing around, removing battery, sd-card, sim-card, waiting a while, I finally managed to do a hard reset.
So then I took the opportunity to upgrade my Dutch 1.18 ROM to the Cingular 1.34 WWE. Everything went fine (after a few retries).
But now my phone doesn't vibrate anymore. I did a softreset to remove all extra programms but that didn't work either: no vibration anymore.
Anyone had or has the same problem (maybe after a ROM upgrade)?
I fear it's a hardware problem (the next in a row of ...).
Problem solved!
I found a strange solution for my problem, very strange...
In my Sounds & Notifications I always have Events disabled (because I don't want to hear my screen clicks). With this option disabled my vibration always worked.
Desperate as I was I enabled it and much to my surprise my vibration was back!!!
Since this was strange to me I checked my other deveice, a QTEK S100, and at this one my Events also is disabled in combination which the vibration still works.
So back to my TyTn, I disabled my Events again and see: my vibration keeps on working!!! So now my settings are back to where they were and my vibration is also back...
I don't know what to think of this, maybe a registry-setting was set to a wrong value en corrected by my enabling/disabling Events???
(I checked the "flashing service LED" before; that was value 1, enabled, so that wasn't the cause).
Probably something was happened with uninstalling operations or setting some options in some software: changing them caused a mistake in registry keys and the time key for vibrating was blanked.........
Well, however you're very lucky...... isnt' it??
where in the registry do I edit my phone to vibrate when it is on vibrate?
things installed:
HTC Kaizer home plugin with tabsetting
havent killed the lights htc audio manager
emuntz htc home customizer
Phone Vibrate
I have been having the same issue with my Mogul. I never used the vibrate and when I went to use it I noticed that it did not work. I have several tweaks on my phone and would like to get this back without doing a hard reset to get back to day one functionality.
if you have Flashed your Mogul to Firmware 2.17.651.0 and disable the blinking LED it also will disable the Vibrate function on your Mogul.
Had same issue on mogul, search reg for \HKLM\Drivers\BuiltIn\AllLEDMgr
If Index is set to 0 change it to 1. The light will comeback and so will the Vibrate Function.
HTC\SPRINT Crack Pipe logic
I Should of got a Palm OS phone.
thanks for the info
chronos360 said:
if you have Flashed your Mogul to Firmware 2.17.651.0 and disable the blinking LED it also will disable the Vibrate function on your Mogul.
Had same issue on mogul, search reg for \HKLM\Drivers\BuiltIn\AllLEDMgr
If Index is set to 0 change it to 1. The light will comeback and so will the Vibrate Function.
HTC\SPRINT Crack Pipe logic
I Should of got a Palm OS phone.
Click to expand...
Click to collapse
Dude thanks for the info I didi run the led disabe. It sucks that I have to choose between good battery or vibration
Hey all i installed BSB tweaks on my phone and i think i have disabled the lock feature on the phone when pushing the hangup button (hard button). To lock the phone i need to click start---then lock on the touch screen. bit of a pain as i would like to do it with the hard hangup button. when i push it instead the screen turns off, then if i push a button it wakes. can anybody help please. i tried searching the forums but couldnt find anything on it. cheers.
This happened to me too, but it seems like (at least that's how I recall it) the last thing I did before this happened is setting an alarm, turn off the phone (or maybe not, I am not sure) and when I dismissed the alarm, the "off" button started to just turn off the display isntead of locking the device
theemed said:
This happened to me too, but it seems like (at least that's how I recall it) the last thing I did before this happened is setting an alarm, turn off the phone (or maybe not, I am not sure) and when I dismissed the alarm, the "off" button started to just turn off the display isntead of locking the device
Click to expand...
Click to collapse
Hey i also had this problem afer installing BSB Tweaks, it hink all you have to do is when the phone it on hold the power key stil it comes up with the options to power off or lock and that....then simply select lock device and it should go back to normal!
I want to disable the vibration when I slide the finger to unlock the phone, I m using
NexusHD2-Gingerbread V3.2a (GWK74)(Android 2.3.7)[tytung_r13]
Is it possible to disable this annoying vibration, I have disabled all the settings related to vibration and this is the only one left.
There are several settings where you need to turn off haptic feedback, are you sure you tried them all?
I had that problem too, but managed to turn it off, but I don't remember clearly where.
I checked all the settings and there is no option to do this.
Go into sound settings, there should be something for haptic feedback. I'm running the same exact rom and I don't have that problem.
Sent from my HD2
Its already disabled
Reboot maybe? Other than that I don't have a clue.
Sent from my HD2
Is it possible to use pattern lock to use 3 dots instead of 4.