Related
I think my 8125 is bricked. I've never had a problem flashing roms until yesterday I tried Farias Kitchen ROM. I flashing went through ok like normal, but when it restarted, it gets a little bit after the second splash screen. The green windows mobile with farias names at the bottom loads, then the topbar of windows mobile loads with the start button, but then nothing else.
I've tried reflashing it in forced bootload mode as well as doing a hard reset. no luck. The update utility keeps telling me that it is an invalid update tool, please get a newer update utility. I've tried taking the battery out for a while and from there doing forced bootloader. Still no luck
Any suggestions?
daddy_yankee1980 said:
I think my 8125 is bricked. I've never had a problem flashing roms until yesterday I tried Farias Kitchen ROM. I flashing went through ok like normal, but when it restarted, it gets a little bit after the second splash screen. The green windows mobile with farias names at the bottom loads, then the topbar of windows mobile loads with the start button, but then nothing else.
I've tried reflashing it in forced bootload mode as well as doing a hard reset. no luck. The update utility keeps telling me that it is an invalid update tool, please get a newer update utility. I've tried taking the battery out for a while and from there doing forced bootloader. Still no luck
Any suggestions?
Click to expand...
Click to collapse
What are you trying to re-flash it with in the BL?
You should be able to flash the loverom without a problem.
TaurusBullba said:
What are you trying to re-flash it with in the BL?
You should be able to flash the loverom without a problem.
Click to expand...
Click to collapse
Thanks, I'm gonna download it right now and try it. What is different about this ROM than any of the cooked roms I have already as well as and official one. All of them in past have worked for me without a problem until now.
daddy_yankee1980 said:
Thanks, I'm gonna download it right now and try it. What is different about this ROM than any of the cooked roms I have already as well as and official one. All of them in past have worked for me without a problem until now.
Click to expand...
Click to collapse
Well, it sounds like it may have just been a bad casserole you cooked.
But, you could probably even re-flash using your carrier ROM. This one is just a fool-proof way to get you back on your feet. This ROM is just G3/G4 independent and doesn't include a radio, ipl/spl, or extrom.
TaurusBullba said:
Well, it sounds like it may have just been a bad casserole you cooked.
But, you could probably even re-flash using your carrier ROM. This one is just a fool-proof way to get you back on your feet. This ROM is just G3/G4 independent and doesn't include a radio, ipl/spl, or extrom.
Click to expand...
Click to collapse
Nope, just tried flashing that ROM mentioned above, and still the same answer. It keeps telling me that I need to get a new update utility. That is so weird because I never had that problem. I have already tried flashing the official as well with no luck.
daddy_yankee1980 said:
Nope, just tried flashing that ROM mentioned above, and still the same answer. It keeps telling me that I need to get a new update utility. That is so weird because I never had that problem. I have already tried flashing the official as well with no luck.
Click to expand...
Click to collapse
So, how exactly are you updating it in the bootloader? (just curious)
TaurusBullba said:
So, how exactly are you updating it in the bootloader? (just curious)
Click to expand...
Click to collapse
I put the phone in bootload mode by pressing and holding the camera button, then resetting by pushing the reset hole which then loads it to a colorful screen which I assume is the bootloader screen. Then I just connect it and try to flash it using one of the ROMS i have. Thats how I did it the past couple of times.
What upgrade utility are you using? You might wanna try the one attached! It is the 'NO_ID' version and up to now it flashed everything! Simply extract the zip file to a folder on your desktop, then copy your nbf file in to it too and run the "ROMUpdateUtility_Wizard_NoID.exe"
hello
im having the same problem, i just tried it, didnt work for me
Did you CID unlock your phone before trying to flash it? Did you also try to flash it with your shipped ROM again?
My phone also appears to be bricked. It locked at 99%, and after trying the steps indicated in the core2.0 installer, it closed, and I'm having difficulty figuring out the next step. As is, I get ERROR [264] CONNECTION. Is there a way to get the phone functional enough to load an OS? I've been searching these forums for about 30 minutes and haven't found what I'm looking for. There should be a recovery wiki.
I have the same problem...
Junner2003 said:
Did you CID unlock your phone before trying to flash it? Did you also try to flash it with your shipped ROM again?
Click to expand...
Click to collapse
Hi Junner, i have the same problem too...i did a unlock CID before i try to put the core 2...but after the boot its freeze on splash screen and nothing happend...what can i do? help me please...tks a lot.
alissonguedes said:
Hi Junner, i have the same problem too...i did a unlock CID before i try to put the core 2...but after the boot its freeze on splash screen and nothing happend...what can i do? help me please...tks a lot.
Click to expand...
Click to collapse
First thing you could try is to flash it with your shipped ROM again (the one you had on there originally). If that does not work you might want to search the forum for the LOVE ROM ??? I never tried that one but people say it should worke on any device (G3 /G4).
I thing more
alissonguedes said:
Hi Junner, i have the same problem too...i did a unlock CID before i try to put the core 2...but after the boot its freeze on splash screen and nothing happend...what can i do? help me please...tks a lot.
Click to expand...
Click to collapse
Every rom that i put in the phone is the same...always freeze on the splash screen...
Junner2003 said:
First thing you could try is to flash it with your shipped ROM again (the one you had on there originally). If that does not work you might want to search the forum for the LOVE ROM ??? I never tried that one but people say it should worke on any device (G3 /G4).
Click to expand...
Click to collapse
I try LOVE too and nothing...the phone is G3 with ipl/spl 1.01
alissonguedes said:
I try LOVE too and nothing...the phone is G3 with ipl/spl 1.01
Click to expand...
Click to collapse
Did you try already to flash your shipped ROM?
I dont have one
Junner2003 said:
Did you try already to flash your shipped ROM?
Click to expand...
Click to collapse
I dont have one...
You can download the Official ROM directly from HTC's site.
alissonguedes said:
I dont have one...
Click to expand...
Click to collapse
Yeah, download that one if Cingular was the original one! If not: let me know what was on there originally!
Junner2003 said:
Yeah, download that one if Cingular was the original one! If not: let me know what was on there originally!
Click to expand...
Click to collapse
A mda vario tmobile from germany...
I was updating my MDA to WM6 when my computer froze in the middle of updating, so i unhooked the MDA and resset it, now its stuck on the splash screen!!!! no matter what I do! and activesync will not recogizine it also!! ive tried hard reset be all its saying issomething about a FAT partition, it can still go into bootloader mode so i know its not bricked, its a G3 model...SOmeone PLEASE help!!!!!
Nolimit1211 said:
I was updating my MDA to WM6 when my computer froze in the middle of updating, so i unhooked the MDA and resset it, now its stuck on the splash screen!!!! no matter what I do! and activesync will not recogizine it also!! ive tried hard reset be all its saying issomething about a FAT partition, it can still go into bootloader mode so i know its not bricked, its a G3 model...SOmeone PLEASE help!!!!!
Click to expand...
Click to collapse
Read the wiki for wizard, I am sure God will help u if u help urself. I think it can be restored by going into the bootloader.
NEww problem
Thanks, did some reading and solved it, but than i wanted a new rom and when i installed it I started and it stuck at splashscreen again, only now hard reset fails and now matter what original tmobile rom i flash it to its still stuck!!! Please help!
Nolimit1211 said:
Thanks, did some reading and solved it, but than i wanted a new rom and when i installed it I started and it stuck at splashscreen again, only now hard reset fails and now matter what original tmobile rom i flash it to its still stuck!!! Please help!
Click to expand...
Click to collapse
What steps have you taken, and where are you stuck at now? Can you bring it into bootloader mode? What IPL/SPL? You said its G3, is it CID unlocked?
So far i have flashed it with the original Tmobile rom and some others through the bootloader mode, but even after it says flash completed I still get stuck on the splash screen, my ip/spl are both 2.26, and it is CID locked, and at the time i dont had a mini sd card to perform an sd rom upgrade, god i wish i just stuck with my original rom, please help!
Nolimit1211 said:
So far i have flashed it with the original Tmobile rom and some others through the bootloader mode, but even after it says flash completed I still get stuck on the splash screen, my ip/spl are both 2.26, and it is CID locked, and at the time i dont had a mini sd card to perform an sd rom upgrade, god i wish i just stuck with my original rom, please help!
Click to expand...
Click to collapse
So you've flashed back the oroginal tmobile rom, is that also 2.26? I presume you are using the standard update util for the flash and it says completed? I've seen the update util do that (say 100% complete but not actually update anything) .. this behaviour is documented somewhere in this forum (took me about 8 flashes and a lot of confusion and frustration before I found the forum threads!) this only happened on a CID locked phone flashing a custom rom.. i don't think that happens with original vendor roms..
Can't say I have had the same problem. From looking at the forum, most people who get stuck like this can flash the wizard love rom and get back on. For me, I have mostly been able to get back to the original rom when needed, except when I bricked my G4 phone (before G3/G4 was well understood)...
Yes sir that is also a 2.26 and yes im using the standerd methodhat is this wiazrd love rom your talking about though? Maybe i should flash it to that instead of the original tmobile rom?
p.s if this only happens on cid locked phones, is there anyway to unlock my cid while in bootloader mode?
Nolimit1211 said:
Yes sir that is also a 2.26 and yes im using the standerd methodhat is this wiazrd love rom your talking about though? Maybe i should flash it to that instead of the original tmobile rom?
Click to expand...
Click to collapse
Like I said I had not used it myself, but there are many references to it in the forums.
When you say you are stuck, does it load the Windows splash screen or does it get stuck on the IPL/SPL screen?
It gets stuck on the IPL/SPL screen
Nolimit1211 said:
p.s if this only happens on cid locked phones, is there anyway to unlock my cid while in bootloader mode?
Click to expand...
Click to collapse
No you can't CID unlock in bootloader mode.. there are a number of threads on how to CID unlock...
Thanks for you assisting me sooo much, im going to try and flash with the love rom, do you have any other tips?
Nolimit1211 said:
Thanks for you assisting me sooo much, im going to try and flash with the love rom, do you have any other tips?
Click to expand...
Click to collapse
Only that by all accounts, you should be able to get a working phone again if you can get into bootloader mode.. unless you have hardware issues. The other item that may be of problem is the extended rom which can get corrupted.
Sorry I couldn't be of more help. Good luck.
Can anyone else please help, youll be a god to me if you can help me get my MDA up and running again!!!!
So I installed the updated ROM and Radio to see if I could get the GPS working...
Everything went fine, I had to call Verizon to get the AKEY, but everything worked after that. Then I decided to downgrade because I thought it was running a little slow, and I didn't like all the added programs.
That was where I messed up. I did everything like I thought I was supposed to. I used the RELOCKER, and flashed the older version of the VZW rom... well atleast I attempted to. My phone is stuck at 0% flashed.
Any ideas?
ajshah said:
So I installed the updated ROM and Radio to see if I could get the GPS working...
Everything went fine, I had to call Verizon to get the AKEY, but everything worked after that. Then I decided to downgrade because I thought it was running a little slow, and I didn't like all the added programs.
That was where I messed up. I did everything like I thought I was supposed to. I used the RELOCKER, and flashed the older version of the VZW rom... well atleast I attempted to. My phone is stuck at 0% flashed.
Any ideas?
Click to expand...
Click to collapse
It is really tough to brick a phone.
Just pull the battery and wait 3s. Then replace. It should boot back up to the last ROM installed.
The only problem with that is that it doesn't... its stuck on the bootloader screen...
ajshah said:
The only problem with that is that it doesn't... its stuck on the bootloader screen...
Click to expand...
Click to collapse
1) To get the Tricolor Bootloader Screen to come up (actually this may be where you are already - if so, skip to #2). You must simultaneously: (a) hold down the power button; (b) hold down the camera button; and (c) use your stylus to press the little reset button in the hole at the bottom of your 6800. This should pop up the Tricolor Bootloader screen if you'd installed this first, as instructed.
(2) Then plug it into the computer's USB port. Make sure that USB is NOT enabled in "Windows Mobile Device Center" (should be in your start->programs menu). Click on connection settings and turn off the checkbox for USB connection.
(3) Then run the 3.17 Rom loader. This will get you back up and running.
(4) Then start again and run the 2.09 or 2.17 Rom loader. It should load without a hitch.
(5) Then you will have to re-setup your your MSID and MDN. You will need your EPT.
3.17 Rom Loader? which one is that?
I know I am asking a lot, but I have been searching all day, and I am a relative n00b...
so Thank you soo much for helping me out...
I have the same problem as you. Relocked the phone and now I can't do anything. Tried flashing to different radios, different roms and nothing. I did get 1 rom to go to 1% complete but it told me I had the wrong vender(sic) or something
ajshah said:
3.17 Rom Loader? which one is that?
I know I am asking a lot, but I have been searching all day, and I am a relative n00b...
so Thank you soo much for helping me out...
Click to expand...
Click to collapse
Hmm -- well maybe I need more info.
Which ROM did you 'upgrade' to?
I upgraded to the new one with GPS... I did everything in the steps, the way it said to do it...
Then I wanted to downgrade, and I saw how some1 else did it with relocking it and downgrading it, so now my bootloader reads:
TITA100
SPL-1.06.0000
CPLD-9
and it still says RUUNBH in the right corner...
Oh, and the SD card TITAIMG.nbh thing doesn't work either, unless I am doing it wrong...
The error I get is a 262 error, if that helps...
ajshah said:
I upgraded to the new one with GPS... I did everything in the steps, the way it said to do it...
Then I wanted to downgrade, and I saw how some1 else did it with relocking it and downgrading it, so now my bootloader reads:
TITA100
SPL-1.06.0000
CPLD-9
and it still says RUUNBH in the right corner...
Click to expand...
Click to collapse
Oh -- then just run the Official Released version of 2.17. You should be golden.
quantumforce1 said:
Oh -- then just run the Official Released version of 2.17. You should be golden.
Click to expand...
Click to collapse
Where can I find the official version?
do i need to go through all of this if i want to go back from the gps rom to the dcd kitchen/rom 2.0 or can i just flash back and you only have to relock if you want to go back to the stock rom?
friguy33 said:
do i need to go through all of this if i want to go back from the gps rom to the dcd kitchen/rom 2.0 or can i just flash back and you only have to relock if you want to go back to the stock rom?
Click to expand...
Click to collapse
I reflashed back to the 2.0 rom and I got stuck at the vzw logo screen so I tried to get the radio flashed back. I ended up trying to lock the spl and thats where i got screwed
quantumforce1 said:
Oh -- then just run the Official Released version of 2.17. You should be golden.
Click to expand...
Click to collapse
Tried that... Didn't work... I tried re-installing radio 1.40 first and then 2.17 and nothing, then i tried the other way... I still am stuck at 0% and then I get the 262 error...
friguy33 said:
do i need to go through all of this if i want to go back from the gps rom to the dcd kitchen/rom 2.0 or can i just flash back and you only have to relock if you want to go back to the stock rom?
Click to expand...
Click to collapse
Think of it this way ...
There are 'basically' three parts to the software that runs your phone.
1. There is the SPL / bootloader.
2. There is the Radio ROM.
3. There is the System ROM.
2 and 3 above will not load or work correctly if #1 above is bad or the wrong version.
Therefore, if you want to go back to 2.17 then the easiest way to do this is to:
1a. Get the ReLocker (which is SPL v1.06)
1b. *Don't worry that it stays in the boot loader mode.
2. Run your offical carriers released ROM, Sprint 2.17 (which will include both the System and Radio ROMs).
3. Reload your custom apps.
4. Sync.
5. *Remember from the previous article above, you will still need your EPST, MDN and MSID codes.
That's it.
If I reset, right before I get the tri color screen, it flashed a grey screen that says "no image file" for a second.
dagnasty said:
If I reset, right before I get the tri color screen, it flashed a grey screen that says "no image file" for a second.
Click to expand...
Click to collapse
Do you have the tri-color screen up? If so - what version?
Screen says:
TITA100
SPL-1.06.0000
CPLD-9
dagnasty said:
Screen says:
TITA100
SPL-1.06.0000
CPLD-9
Click to expand...
Click to collapse
Mine says the same ****....
Does yours flash "no image file" right before you get the tricolor screen?
My problem here is that I just cannot get out of bootloader. NO ROM OR RADIO WILL INSTALL ON MY DEVICE.
I've tried using goldcard and attempting numerous .nbh files and each time the update fails on the Radio_V2 part. I've also tried updating with the standard and custom RUUs and these always fail at 91%. the RUU always says 'Error 270....update error...the image file is corrupted' no matter which ROM I use.
Updating the radio only stalls at 96% and gets stuck there.
Currently my bootloader says 'Update ROM code error Please try again. See the attached photo for a screenshot. I am able to connect to a pc ok and run updates.
Ive also tried a hard reset, which WORKS but still doesn't boot up the device.
Can anyone help here? If not it looks like my HD2 is going on eBay for spares!
My SPL is version 1.42
Why is yours 0.67????
I've no idea bro, it's an eBay purchase from before the general release of the device.
I hear the hacked hardspl and sspl is nearly done so maybe this will help you to upgrade the rom?
Have you checked you have not brought some prototype or something as your spl version is way out.
Hope you get it fixed very soon.
How can it show the "SECURITY UNLOCKED" while there is no cid unlock for this device?
How did you do it?
There is something wrong with you..
And an interesting point: your bootloader is different from mine, my updare process shows % progress in number and HTC logo behind the progress bar, yours is different..
ultraslan said:
How can it show the "SECURITY UNLOCKED" while there is no cid unlock for this device?
How did you do it?
There is something wrong with you..
And an interesting point: your bootloader is different from mine, my updare process shows % progress in number and HTC logo behind the progress bar, yours is different..
Click to expand...
Click to collapse
i think he as used some hd stuff,not compatible with leo of course
maybe because it's a pre-release (prototype) unit you can't update it to a newer rom
it does sound like a prototype...
shouldnt need gold card.
have you tried flashing from sdcard without gold card in there?
try talking nicely to cmonex to see if she can help?
hi
leoni1980 said:
My problem here is that I just cannot get out of bootloader. NO ROM OR RADIO WILL INSTALL ON MY DEVICE.
I've tried using goldcard and attempting numerous .nbh files and each time the update fails on the Radio_V2 part. I've also tried updating with the standard and custom RUUs and these always fail at 91%. the RUU always says 'Error 270....update error...the image file is corrupted' no matter which ROM I use.
Updating the radio only stalls at 96% and gets stuck there.
Currently my bootloader says 'Update ROM code error Please try again. See the attached photo for a screenshot. I am able to connect to a pc ok and run updates.
Ive also tried a hard reset, which WORKS but still doesn't boot up the device.
Can anyone help here? If not it looks like my HD2 is going on eBay for spares!
Click to expand...
Click to collapse
This looks like corrupted sectors in your device, try mtty, I think i seen similar problem before in herm or diamond
please searh the forum this one of them but try to find later version of mtty
http://forum.xda-developers.com/showthread.php?t=304408
try flashing without NK.nbf
Try flashing without the radio upgrade by removing the file mentioned in
the title (nk.nbf) from the folder where RUU.exe is exectuted (you might need to hunt fot the install files in the temporrary directories in your computer. The temp files are created after clicking the update.
Anyway, you're a senior You'll know what to so.
If there's no separate radio file for you, I would try taking the batt out,
then do a hard reset.
Peculiar !
Info
Try to flash using an official rom!! If You stil don't get through take off the battery for a couple hours then try again!! But If all this don't help, you'd better try to reflash with the rom you had previously
You used a MFG SPL = Developer SPL. Ask cmonex in the IRC for help. She works with the developer spl for hacking the spl.
good luck
Connect your phone to the PC using MTTY.
Send "set 14 0" (without quotes) and then task 8 to reboot.
Try if it works.
crazy cat said:
You used a MFG SPL = Developer SPL. Ask cmonex in the IRC for help. She works with the developer spl for hacking the spl.
good luck
Click to expand...
Click to collapse
oh good, she got some use from it
leoni1980 said:
My problem here is that I just cannot get out of bootloader. NO ROM OR RADIO WILL INSTALL ON MY DEVICE.
I've tried using goldcard and attempting numerous .nbh files and each time the update fails on the Radio_V2 part. I've also tried updating with the standard and custom RUUs and these always fail at 91%. the RUU always says 'Error 270....update error...the image file is corrupted' no matter which ROM I use.
Updating the radio only stalls at 96% and gets stuck there.
Currently my bootloader says 'Update ROM code error Please try again. See the attached photo for a screenshot. I am able to connect to a pc ok and run updates.
Ive also tried a hard reset, which WORKS but still doesn't boot up the device.
Can anyone help here? If not it looks like my HD2 is going on eBay for spares!
Click to expand...
Click to collapse
hey. can you send me a PM, I'm very interested in your device
Don't use it for spareparts..
I'm assuming you bought the phone?... Send it for repairs, they don't ask what you did. Just say you did a hard reset and this happend.. Believe me, they don't care at the repair shop (for sure @ eurotwice.be), great service they pickit up @ your door If you lost the receipt p.m. me
UPDATE
ok i didnt run MTTY through properly... after running task 29 this is the error I get....
ANYONE GOT ANY IDEAS????
The same problem exists in the link below
yes bro, please check this post
http://forum.xda-developers.com/showthread.php?t=371154&page=15
Boot screen....
OH MY.....
Just fired up the HD2 to try out some MTTY commands and the boot screen has fired up. This is the first time it's not gone straight to bootloader.
I will await the device possibly kicking into life......fingers crossed.
leoni1980 said:
OH MY.....
Just fired up the HD2 to try out some MTTY commands and the boot screen has fired up. This is the first time it's not gone straight to bootloader.
I will await the device possibly kicking into life......fingers crossed.
Click to expand...
Click to collapse
cool keep us posted how you get on.
Hi, after hours of researching to find the problem, i cant find it so as my last resort i will ask the mighty forums if there is anything they can do about it.
The problem is that its stuck in a boot loop, i can get in to bootloader and Hboot.
When i press to go in to recovery its just goes to the HTC logo and stays there.
When i try to do a factory reset same thing happened.
Anyway, the facts.
Its a DHD it used to have leedroid latest as rom, atm i have no idea it is supposed to be 1.32 stock rom for rooting and RADIO-26.14.04.28_M, kernel was also leedroid recommended but i guess that also is 1.32 stock.
It was ENG S-OFF but then i tried some PD98IMG and it changed to SHIP S-OFF
Things that i have tried.
Tried different PD98IMG to get the recovery working but nothing same thing happened there.
Tried patched/flashed the recovery part only with no luck.
Tried to get into recovery through pulling the battery inserting the usb and then inserting the battery again, no luck.
The odd thing is when i try to charge the phone and the led goes orange and when i pull the usb out it stays orange, it should turn off.
I suppose i ****ed something over but i have no clue of what that is?!?
Help would be most appreciated
I'm suggesting everyone to give this method a try although i have no experience with it but since it can be used to recover using computer i believe recovery isn't necessary here so that you can recover the firmware using the PC.
Hope this helps
shad0wboss said:
I'm suggesting everyone to give this method a try although i have no experience with it but since it can be used to recover using computer i believe recovery isn't necessary here so that you can recover the firmware using the PC.
Hope this helps
Click to expand...
Click to collapse
Done and failed, same problem no difference what so ever.
SHIP S-OFF is OK!! U got it m8!
If you want to use your own Image do it within this way:
1. Flash this: http://www.multiupload.com/FKJ8B7Q0QM
and after this:
2. Flash this: http://www.multiupload.com/AURLLESU5V
And enjoy it! I don't know why the PD98IMG is not working on your device so I recomend to flash the RUU. Within the RUU you will also get the latest firmware for phone and wifi and so on. It's not a need, it's a must!
The 2nd ROM is same as above but it's ROOTED and contains the 4ext Recovery which will give you the option to flash whatever you want.
BUT!!! This ROM's are ORIGINAL. If you want to use a CUSTOM ROM I would recomend you will format your device by the 4ext Recovery or you are using the FULL WIPE 1.5.
Regards!
Sorry for the insane delay.
That did not work either, anyone else have any idea what to do, installing through PD98IMG.zip files seams not to work, will at this point do anything.
I'am a student so buying a new one is out of the question.
I tend to have to see things to understand them more. Maybe other people are similar. Is it possible you can video the process, put it on YouTube and some of the experts here can see it and talk you through it?
Grant Barker said:
I tend to have to see things to understand them more. Maybe other people are similar. Is it possible you can video the process, put it on YouTube and some of the experts here can see it and talk you through it?
Click to expand...
Click to collapse
Dude, I plus 1 this comment.
Doing exactly that has helped me in the past too.
Well, i am here again with some videos this time, dont really know if it will explain anything but here goes nothing.
youtube.com/watch?v=cHA-k6SadoE
Just a simple start to show what the hell is wrong with it.
youtube.com/watch?v=squwhiGNM3s
Here's me trying factory reset but failed, stuck at the same place as before.
youtube.com/watch?v=aZF1ALz0Z-w
Here is where i go into fastboot, just to show that i can do it and then back again to try recovery, same problem...
Anymore info you need, next time i will answer much faster, anyway there the problem it gets stuck on HTC logo forever, no restart no nothing...
ithen said:
Sorry for the insane delay.
That did not work either, anyone else have any idea what to do, installing through PD98IMG.zip files seams not to work, will at this point do anything.
I'am a student so buying a new one is out of the question.
Click to expand...
Click to collapse
when you flashed PD98IMG.zip does it give you a cid error?. If this is the error then a gold card needs to be made for your device first, then you flash the RUU.
Back again.
No CID error, its skips something called TP when i try to flash it.
I can use any simcard, its an unbranded phone i believe.
And also if it is to any help, when i plug my charger in the phone and then back out again, the little orange led keeps emitting light, as if it stills charging.
My English is not very good.
I want to know what did you do for it before its stuck in a boot loop?
You can get into HBOOT and connect the phone to the computer,then try to run RUU.Before you do this,make sure you have make golden card.
Try another pd zip..i came across a few corrupt ones,the answers in this site somewhere alterbatively google the sentence you want the answer to..or the key words,if the systems still working theres a 98% chance youll get it going boot loops from what i see are just a file or something causing chaos..once its gone voila.
Good luck
Sent from my Desire HD using XDA Premium App
Enter hboot and paste exactly what it says in there.
SHIP AND ENG don't matter as long as it's S-OFF. If you can't access recovery and if you're unable for some reason to flash a PDimg, download AAHK and use it to unroot. That will hopefully get you into the stock ROM and S-ON of course.
Use AAHK again to root. You will still have access to your stock ROM.
Now here's the tricky part. If the phone won't boot at all that probably means there's nothing to boot at all. Happened to me a lot of times. If you can still get into hboot then don't panic. See if AAHK will help you out.