Related
Hello everyone,
first merry x-mas.
I spended a whole afternoon to find the accelerator of GPS for my trinity.
on the forum, there are three tools exist:
1. QGPS from http://www.avaricum.net/qgps.cab
2. SeaSGEE
3. a modified QuickGPS from P3300
QGPS is unique FOR HP DEVICE, SeaSGEE and the QuickGPS from P3300 are FOR SiRF Star chips which download a "packedEphemeris.ee" to the windows root.
It's been a misunderstood on this forum that many members think that trinity has a SiRF Star Chips.
But, as a matter of factor, what's in trinity is a Qualcomm gpsONE chipset. (qualcomm 6280). And the right satellite map file for qualcomm chipset is "xtra.bin".
So actually, trinity MUST use the same QuickGPS as Kaiser or Diamond which use the same Qualcomm BRAND.
Somehow the quickGPS is coded uniquely for Kaiser or diamond, on trinity it will say connetion failed.
With some luck I found the quickgps.exe cracked for any deviced, version which download xtra.bin instead of packedEphemeris.ee
Tested after a hard reset (so that's sure that will be a cold start of the gps), and the quickgps really works like a charm, tomtom finished his first location within 30 seconds.
Hope this will be helpful for all of you. good luck
At last a quick gps that works.
thanks for sharing
Thanks. It works properly in my Tinity. I've just renamed QuickGPS.exe.0409.mui to QuickGPS.exe.0C0A.mui, because I use a Spanish ROM.
Best Regards !
Hi,
Are you sure that it's working ?
I've just try the cab.
It's download the xtra.bin from the webserver but it didn't upload it to the radio module.
I enabled "AT command debug" for retrieving the content of the exchange from the PPC part (samsung) and the MSM6275.
Connection to the GPS port send the [email protected] commant but didnt upload the xtra.bin...
And i've just try to have a fix on my place.
It's take exactly the same time as before.
For your information, the msm6275 retrieve the ephemeris over the air thru the low speed like provided by the GPS system.
This , as read on the Trinity Service Manual, take 35 sec on average.
This Ephemeris is stocked on the radio part of the MSM6275.
It's have 4 hour of validity time.
So, if you try to connect , even after hard reset (since hard reset only reset the ppc part), this ephemeris is ok.
You will normally have a fix within 15 sec in this case.
I also have found the best way to improve the fix time on the trinity.
You have to use he "GPS sharing" fonction provided by wm.
I set it to share the GPS on COM4 . The original GPS COM port is COM9.
After that, i start a GPS information software on COM4 and also TOMTOM at the same time.
I have to also be on stationned position ( car stopped ).
The fix take less than 35 sec in 95% of the case.
Canope
I am usually a sceptic when it comes to those tools but I just installed this (also had to rename Windows/QuickGPS.exe.0409.mui, in my case to QuickGPS.exe.0407.mui for German ROM).
I went outside and I got a fix in about 45 seconds which is unusual for my street. I'll keep an eye on the GPS fix times.
EDIT: I just read what canope wrote and now I'm not so sure if my mind wasn't just playing tricks on me. Debugging the AT commands seems a more scientific method. Could someone do the same for a device like Kaiser or Diamond to check if the upload can be seen there?
Italian MUI
My italian mui for this QuickGps version
i'am using a portuguese rom any help to put it working ?
Yes: go to your windows dir, look for files ending with XXXX.mui.dll to find out what the portuguese number is (XXXX for germany is 0407).
Then copy Windows/QuickGPS.exe.0409.mui to your PC, change 0409 to the ID you found and copy it back.
You can then delete the english QuickGPS.exe.0409.mui if you want.
This will make it appear to work but as canope pointed out it may well be equally useless as all earlier tools for Trinity.
hello canope,
u give me a right way to verify it.
I enabled both my trinity and diamond.
based on the log file, diamond doesnt show a upload command neither.
I dont know if at log will write down this action.
I can understand why u think the xtra.bin is not uploaded. the SiRF Star chip absorts the packedEphemeris.ee, and the file will disappear in windows root. (based on my knowledge of tomtom one 1)
Somehow Qualcomm chip doesnt act the same way, it leaves xtra.bin in windows root all the time. (based on my test on diamond)
besides, the log file is uploaded, u can see the diamond dont even show [email protected] command after starting a Tomtom
This tool definitely works. Fix within 30 secs with Google Maps and haven't used GPS on this ROM yet.
Hi, can you try this sequence on the diamond, with atdbgcmd on:
- shutdown it;
- start it;
- launch quickgps, update the ephemeris;
- start tomtom or other gps client;
- copy the atdbg file located on /temp to another place;
You will normally see commands like [email protected]
the [email protected] is hardcoded on the quickgps binary file.
themaskfly said:
hello canope,
u give me a right way to verify it.
I enabled both my trinity and diamond.
based on the log file, diamond doesnt show a upload command neither.
I dont know if at log will write down this action.
I can understand why u think the xtra.bin is not uploaded. the SiRF Star chip absorts the packedEphemeris.ee, and the file will disappear in windows root. (based on my knowledge of tomtom one 1)
Somehow Qualcomm chip doesnt act the same way, it leaves xtra.bin in windows root all the time. (based on my test on diamond)
besides, the log file is uploaded, u can see the diamond dont even show [email protected] command after starting a Tomtom
Click to expand...
Click to collapse
canope said:
Hi, can you try this sequence on the diamond, with atdbgcmd on:
- shutdown it;
- start it;
- launch quickgps, update the ephemeris;
- start tomtom or other gps client;
- copy the atdbg file located on /temp to another place;
You will normally see commands like [email protected]
the [email protected] is hardcoded on the quickgps binary file.
Click to expand...
Click to collapse
hello, the log i have uploaded is actually the sequences u demend.
Did you have taskmanager on your mobile phone ?
I've noticed something strange on the at command logs.
There is an agpsadress setted.
I'm interrested to know which diamond rom version you have ?
themaskfly said:
hello, the log i have uploaded is actually the sequences u demend.
Click to expand...
Click to collapse
canope said:
Did you have taskmanager on your mobile phone ?
I've noticed something strange on the at command logs.
There is an agpsadress setted.
I'm interrested to know which diamond rom version you have ?
Click to expand...
Click to collapse
yes, i noticed that too. the rom is official RUU_Diamond_HTC_FRA_1.93.406.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
[email protected] may have string in QuickGPS code, yet it's on propose for the acient device such as p3300 (SiRF STAR again) which i can recell it's where the first version of quickgps is found. the programmer normally doesnt rewrite the code completely.
another exemple is the log file I have provided, diamond doesnt even have [email protected] which trinity has. different devices have some different AT commands.
For another deep study case, I found the gps tool in the forum, which explain how ＠setgps works (cool, warm, hot, xtra start) just use setgps.exe and restart the device.
One thing I must point out, on the SiRF STAR chip, packedEphemeris.ee is upload automaticly by the code of windows ce, quickgps has nothing coded to do with the upload thing. if you place a packedEphemeris.ee in the windows root (a sirf star chip of cause), modify HKEY_LOCAL_MACHINE\Software\EE\AcessTime, the packedEphemeris.ee will be uploaded and disappear.
Thanx
one Question: Dose it effect Battery?
This confirm my feeling.
QuickGPS cannot work on the trinity.
For me, the ephemeris is uploaded by something else.
I think it uploaded by the rilgsm.dll.
This file contain the ril driver specifically made for the device.
So, for me , the rilgsm.dll Diamond's files is in charge of the uploading.
Can you send me back this file for the diamond ?
For your information, i was the first one who have gps fonction on the trinity .
Check on the forum, you will find my contribution to the trinity .
I've send the first radio gsm enabled rom and the necessary files ( rilgsm.dll included).
So , for me , the rilgsm il in charge of this actions.
themaskfly said:
yes, i noticed that too. the rom is official RUU_Diamond_HTC_FRA_1.93.406.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
[email protected] may have string in QuickGPS code, yet it's on propose for the acient device such as p3300 (SiRF STAR again) which i can recell it's where the first version of quickgps is found. the programmer normally doesnt rewrite the code completely.
another exemple is the log file I have provided, diamond doesnt even have [email protected] which trinity has. different devices have some different AT commands.
For another deep study case, I found the gps tool in the forum, which explain how @setgps works (cool, warm, hot, xtra start) just use setgps.exe and restart the device.
One thing I must point out, on the SiRF STAR chip, packedEphemeris.ee is upload automaticly by the code of windows ce, quickgps has nothing coded to do with the upload thing. if you place a packedEphemeris.ee in the windows root (a sirf star chip of cause), modify HKEY_LOCAL_MACHINE\Software\EE\AcessTime, the packedEphemeris.ee will be uploaded and disappear.
Click to expand...
Click to collapse
Hi
I don't know if this quickgps works or not, I can't verify because it's snowing and the fix is difficult. My nmea log is about 90kb and after 5 minutes no fix at all...
But inside the package there is a registry key:
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\QuickGPS]
"region"="US"
Have you tried to change it to the country you live? And does the server provides information for more than a country?
Ciao
works for me
I'm no expert and don't know anything about the inner working of a GPS but I tryied the file this morning and in a cloudy day while speeding on a motorway got a fix in 30 sec. (+/-) - haven't used the GPS for over a week before this morning -
I had the same fast fix with the latest PDAMobiz ROM's too so there must be a way to speed up the fix on the trinity and really think that this is it
BTW if is just my mind playing games with me - well I'm happy just as well
thanks a lot to themaskfly for posting this and happy new year to all
claros said:
Hi
I don't know if this quickgps works or not, I can't verify because it's snowing and the fix is difficult. My nmea log is about 90kb and after 5 minutes no fix at all...
But inside the package there is a registry key:
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\QuickGPS]
"region"="US"
Have you tried to change it to the country you live? And does the server provides information for more than a country?
Ciao
Click to expand...
Click to collapse
After install, and verify the registry, i already had my région without change it :
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\QuickGPS]
"region"="FR"
Thx
QuickGPS does make a difference
This program really does work! When I used the original HTC Radio ROM 1.46, it was very slow to obtain GPS fixes. But after upgrading to radio 1.56.70.11 (my base ROM is still the original WM6.0 WWE version 3.00.707.18) and installing QuickGPS (with corrected region to download the right data) fixes are now obtained very quickly from a cold start. That is compared to many occasions of waiting about 20 minutes prior to installing this software.
I did have to change the region in the registry [HKLM] - Software\HTC\QuickGPS\region because when I installed it, the default region was the US which also initially accounted for some slow fix times until corrected.
Hi everyone.
Please can you help me to install tomtom 7 on my HD/Blackstone. This is my first PDA/phone like this , and I am kinda struggling.
I have downloaded the Tomtom 7.910.9185, with maps of western europe 1gb.815.2024
The package I downloaded had 3 versions of tomtom7 compressed.
QVGA black, QVGA blue, VGA black.
I am now lost, I have read about cab files, sending to the root file of the storage card, but I cant figure this out.
Is there an idiots guide, (I am a total newb and Idiot) showing how to do this. Maybe one of you guys has a webpage or thread with it all easily put down.
Your help would be most appreciated please.
Rgds
Neil
RTFF and you find this http://forum.xda-developers.com/showthread.php?t=432410
TOM TOM 7
You can install all versions. The best is the VGA . I Have it on my HD . Work fine .
Fritz Thecat said:
You can install all versions. The best is the VGA . I Have it on my HD . Work fine .
Click to expand...
Click to collapse
Does it have bigger POI icons?
Cause i've installed QVGA , it's full screen and looks nice but hte POI icons are little.
Or maybe that just tomtom 7
Hi,
I don't know if you already found how to do this but i will try to give you a simple guide:
1. copy the file VGA black.cab to your SD card root.
2. click on the file once (a .cab file can be compared to a .exe file on a pc)
3. After install, copy your map western europe 1gb.815.2024 to the root of your SD-card. Make sure that when you open the folder of the map, you should see files and not another map otherwise it won't work!
This should get you up and running tomtom 7.
POIs are small 'cause the TT version available run quite correctly on HD, but IT'S NOT the right version for HD, simply it doesn't already exists
Thanks,
Have managed to get the program to install, but no hope with the maps.. Keeps saying they aint activated..
Liquizen said:
Thanks,
Have managed to get the program to install, but no hope with the maps.. Keeps saying they aint activated..
Click to expand...
Click to collapse
So the problem ain't the software itself, is the map activation. You have 2 choices:
1: click here http://www.tomtom.com and have your VISA ready, or...
2: MOD EDIT....WAREZ ARE NOT ALLOWED HERE
hi newbie here, struggling to install...
hi guys/..
i downloaded a version of tt7 from this site to my touch hd. i then had to go and BUY a UK map for £39.95 from TomTom. i followed the instructions to install it, but i'm getting an error code, stating the version of TomTom i have installed is INVALID????
can anyone point me in the right direction for the VGA black version please??
cheers
Vida...
i got the free map installed and working perfectly - BUT, i've still paid £40 knickers for somethin i can't download....
i need some ides please guys...
many thanks for the app btw, just needs to be a valid one so i can get my frickin mapo!!! ha
cheers
Tomtom navigation - where to install maps
Hi all,
I'm spend a lot of time on many forums to find how to propp install Tomtom navigation (I'm using Tomtom 7).
Installing a Tomtom program is so simple but the maps thats another storry.
All informations what I'm found was telling you need to create a folder "maps" in root of the memory card and than copy all files from your PC folder of actual map there. That information is OK just if you want to use a single map.
Problem is if you want use more maps than one.Yo just simple can't coppy contens of two or more maps into the same forder.Or if you try to copy whole folders with maps into yours "maps"folder on your card the Tomtom not see that.
So what to do ???It's really simple.
1. You do not need to create the "maps" folder
2. All what you need to do is copy whole maps folders into the
" My Documents " folder on your storage card (not on" My Device " memory !!! )
Its work perfect,I'm use more than 3 maps (UK+IR, Western+Central EU, Eastern EU,...)
So maybe this info help some people whos need more maps.
Richard
I purchased the map from TOMTOM website, but when I tried to install it using tomtom home, it doesn't allow me to download
vidamusic said:
i got the free map installed and working perfectly - BUT, i've still paid £40 knickers for somethin i can't download....
i need some ides please guys...
many thanks for the app btw, just needs to be a valid one so i can get my frickin mapo!!! ha
cheers
Click to expand...
Click to collapse
Hi stevenyu24, vidamusic et al with TT7 issues. Suggest you read through the thread
http://forum.xda-developers.com/showthread.php?t=432410&highlight=TomTom and pay special attention to bmcconalogue post. All your problems should be solved there.
Best regards,
Just for you guys,
I have Tomtom Home 2.6 installed on my macbook and I can get MapShare working free with my TomTom navigator 7 installed on my Touch HD.
Just connect it as a Disk Device then when TomTom asks which device to use, choose the one on the Storage Card (the map is on the storage card and the app is on the internal storage)
Then, you will get free maps' correction !
Please anyone help!!!
i have installed my original ROM for diamond many times and after installing it I install all my favorite programs.
1st to install (DIAMOND HOLOGRAM) & (POCKET PICTURE 2) “ as the next problem happens with them “ . and to be sure that they work well then to install all the rest programs.
After installing all my programs I found (diamond hologram & Pocket Picture) to stop working and gives these errors :
For the hologram : (An error has happen but could not be displayed as an optional resource assembly could not be found )
For the Pocket Picture : ( an error message with two options – quit and more details ) … I can’t remember the details for now.
Anyway, after many trials to find the source of this error I found that these programs stop working after installing IGO 8.0… not only that but after installing it and got the gps receiver connected !!!!!!!!!!!!!!! ….. yes that is what I found.
Now I need to install all my favorite programs and also to have IGO 8 on my Diamond.
By the way, I have tried to install all the .net versions !!!!
Anyone know what is the problem and it’s solution ????????????????????
!!!!!!!!
no one can help ?!!!
I think you have the same problem as me http://forum.xda-developers.com/showpost.php?p=3469865&postcount=546 no answer yet
more tests
Thanks for your reply
Just wondering are we only 2 in the diamond world having this problem with igo8 !!!!!!!!!!!
I have searched a lot online trying to find anyone have this prob. 2 but failed
By the way let us help each other to find a solution for this.
Yesterday I have tried the same steps:
1- Installing my ROM
2- installing the hologram and pocket picture2, then to be sure they are working.
3- Installing igo8 and before got my gps receiver connected exit the igo and try the hologram. An I found it still working.
4- Starting igo again and got my gps receiver connected. Then to exit it.
5- Trying the hologram again to find it stop working !!!!!!!!!
After the previous steps , I continued with the next steps :
1- Removed the igo8.
2- Trying the hologram and it is still not able to start.
3- Reinstalling the igo8.
4- Starting the igo without having the gps receiver connected. And then to exit the igo.
5- Trying the hologram again (( STRANGE…. IT IS WORKING NOW !!!!!! ))
6- Starting igo again and having the gps receiver connected. Then to exit the igo
7- Testing the hologram again. Sadly to find it stop working again.
From these trials and yours ( sof treset twice or more ) … I think the the gps connecting proccess of the igo8 makes a modification some how in a necessary files required to start the hologram, pocket picture, citytime …. Etc.
Now what is this file shared and required to run all of these programs. And what is the relation between this file and having the gps connected.
Note: the 1st time to have the gps connected it takes too long time. After that it is just one second to get it connected. That means there are some data has been written into the system which makes it takes a long time at the 1st of the program after installing.
Note: at the step no 5 ( underline step above ) the hologram and the pocket picture gave a message indicating that this is the 1st use of this program after installing it, where I have tested it b4 installing the igo and have them to stop working after installing it. This means that the shared file between the Igo and hologram is being rested somehow after the step no 4.
That is all I have tested 4 now….
Any new ideas !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
temp. way to slove the problem
my temp. solution for this poblem for now is to make the system.ini file under the folder "save" on the igo8 folder a read only file before got my gps connected for the 1st time. so by this way no modifications about gps settings will be saved. and as u exit the program of igo u will lose all the new settings u made " also the gps data " .... all you have to do now to make your program working is to open the igo8 again and close it without having your gps connected. that way u will have your programs working without a need to soft reset twice. !!
that is my temp solution for now, any other solution is welcome.
i had igo8 working fine on my touch diamond but i much prefered tomtom, when i uninstalled igo8 my system became really unstable. freezing all the time etc, so i tried to figure out what it was. when you install igo8 it puts loads of files onto your phone/internal storage wherever you installed it. and it doesnt work properly until you remove every single one of them
DOWNLOAD LINK:
http://rapidshare.com/files/232362616/OnTheRoadFix.zip.html
http://www.megaupload.com/?d=NW8YZSLV
Instruction Inside
NOW LENGTH OF PATH IS UNLIMITED
Sounds great, but I can't access the link.
Any chance of getting this to work for tomtom?
Thanks
or iGO8?^^
you must say me
1. preferred file hosting
2. full path to program, ex: "Garmin\Garmin Mobile Xt.exe"
or "StorageCard\Program Files\TomTom\TomTom.exe"
and for automapa.. ?
Can You make one for polish people too ?
1) rapidshare or megaupload (http://www.megaupload.com/)
2) "Storage Card\AutoMapa EU\AutoMapa EU.exe"
thanks You very, very much in advance!!
P.S. the link from 1st post does not work..
may be it will work for Garmin
http://www.megaupload.com/?d=335BJ0QD
automapa and other can be done in 14:00-15:00 or evening after 19:00 GMT+2
because now i not at home : )
I tryed to improove code, but it has some limitations
path must be no longer that
\Wayfinder\Wayfinder.exe
i'm trying to find another way, but....
Does not seem to work. Garmin does show up under default navigators, but it cannot be selected, it goes back to google maps.
you make Garmin.exe as alternative file name?
Garmin folder in main memory?
Yes, I just copied Garmin Navigator TX to desktop, renamed to Garmin.exe, copied back to main memory. It shows up in the default navigators screen, but when I click on it, the selection panel simply closes and GM stays a default.
hmmm
i hav NOT installed GM
so may be try to rename googlemaps.exe in xxx.exe or about
and try again...
Still no luck. I renamed GM, and it no longer shows up in the panel. However, it would still not allow me to select Garmin, just would not open anything when I click Navigation. I guess there is smth different in my X1.
so lets check
if renamed then not seen
so you have right tune up garmin.exe
i have Uninstalled Wayfinder and Googlemaps...
may be uninstalling of GM will help
and if so, you can install GM again and see what happens...
Still no luck. I renamed GM, and it no longer shows up in the panel. However, it would still not allow me to select Garmin, just would not open anything when I click Navigation. I guess there is smth different in my X1.
No, that's not it. Uninstalled GM and Wayfinder, softreset, still does not work.
very suspictious....
may be any one also try to test
and then i could compare
ok mate let's do it together. but I am a noob ;(
if that is not a problem for You we can try with automapa. what do I need to do/prepare?
mayyhem84 said:
ok mate let's do it together. but I am a noob ;(
if that is not a problem for You we can try with automapa. what do I need to do/prepare?
Click to expand...
Click to collapse
path must be no longer that
\Wayfinder\Wayfinder.exe
for example
\Storage Card\AM\AM.exe
or
\AutoMapa\AutoMapa.exe
it is easiest way, i think...
done
ok - so it is
\Storage Card\AM\AM.exe
what now?
mayyhem84 said:
ok - so it is
\Storage Card\AM\AM.exe
what now?
Click to expand...
Click to collapse
try this
http://www.megaupload.com/?d=XLOZDURZ
i have iGo 8 on WinMo and it works fine but when i install it on Android i get a "Please insert your SD card containing iGo 8 content files." is this because the path to the SD card is "/mnt/sdcard/..."? Is there a fix for this yet? or Do we have to wait till NAND? Thanks for all your help
Maybe because igo8 was designed for windows mobile and not android duh. Try igo motonav or igo my way. Dont ask me where to get them. I just know those are made for android. You can just transfer you maps, poi, etc over to the new one.
The problem with iGO for Android is that it is ONLY for HVGA screens yet! no WVGA support for now! The only workaround is to use Motonav which is a redesined iGO for the Motorola phones and WVGA res!
maybe you have license issue with the iGo
only Motonav support WVGA
iGO8 work me, you must have iGO8 folder on the SD card, but it has no 800x600 screen support, so you will see only small screen. Like someone wrote already, MotoNav works great but has very simple UI without special function.
You need to rename the folder "iGo My Way" to
"iGo".
It will work afterwards, though only 1/4 of the screen will be captured, because there are not 800x480 images out there. When I'm driving car, I use WinMob
The best from both WinMob and Android! Hahaha
nemo0405 said:
i have iGo 8 on WinMo and it works fine but when i install it on Android i get a "Please insert your SD card containing iGo 8 content files." is this because the path to the SD card is "/mnt/sdcard/..."? Is there a fix for this yet? or Do we have to wait till NAND? Thanks for all your help
Click to expand...
Click to collapse
wat is iGo 8 *??
The problem with that message is that the phone is with plugged in data cable in Mass Storage mode. Either remove the (data) cable from phone or set to other mode (Charge only).
P.S. So many answers on the net and not even 1 (one !!!) helpfull (what a bore ...). I got this problem yesterday and luckily found the solution. Of course, there's always a chance to get this message, if you are using not paid and not cracked version of the problem.
There is a version of iGo My Way for Android which has a 800*480 resolution actually.
I already replied on a thread about the same thing : http://forum.xda-developers.com/showthread.php?p=9011640#post9011640
Hope this helps.
Mithrandir007 said:
There is a version of iGo My Way for Android which has a 800*480 resolution actually.
I already replied on a thread about the same thing : http://forum.xda-developers.com/showthread.php?p=9011640#post9011640
Hope this helps.
Click to expand...
Click to collapse
sorry to bother, i managed to start the igo (after renaming igo8 folder into igo - otherwise i get "no sd card"), i get the "loading" screen, but at around half of "progress bar" igo just quits, and after a while it says "unable to start .."
any ideas ?
vicai said:
sorry to bother, i managed to start the igo (after renaming igo8 folder into igo - otherwise i get "no sd card"), i get the "loading" screen, but at around half of "progress bar" igo just quits, and after a while it says "unable to start .."
any ideas ?
Click to expand...
Click to collapse
I'm sorry,I didn't notice the reply before now, though I really have no idea how to help you for that..
Mithrandir007 said:
I'm sorry,I didn't notice the reply before now, though I really have no idea how to help you for that..
Click to expand...
Click to collapse
dont worry. i solved the problem .. basicly you cannot use same igo for WM and android. there has to be igo8 (with all its subfolders) for WM, and separate igo (with same subfolders) for droid .. yes, you have to double everything (maps and buildings that takes up most space) but .. if you use 2 systems on one phone, be ready for double stuff on card too
thank you anyway for responding
wixxer said:
You need to rename the folder "iGo My Way" to
"iGo".
Click to expand...
Click to collapse
It was as simple as that.
Thank you for the help!
Much appreciated.
android and win mobile igo8 in the same folder...
vicai said:
dont worry. i solved the problem .. basicly you cannot use same igo for WM and android. there has to be igo8 (with all its subfolders) for WM, and separate igo (with same subfolders) for droid .. yes, you have to double everything (maps and buildings that takes up most space) but .. if you use 2 systems on one phone, be ready for double stuff on card too
thank you anyway for responding
Click to expand...
Click to collapse
You do not need 2 copy's.... let me explain:
Igor for windows has some files in different format e.g. zip.
Ally have to do is copy allthe files that ARE different from android to the same locations as the original. Do not delete existing from either install. Map is shared, poi is shared...
Coals, it all works in both.
Hdfanatic
hdfanatic said:
You do not need 2 copy's.... let me explain:
Igor for windows has some files in different format e.g. zip.
Ally have to do is copy allthe files that ARE different from android to the same locations as the original. Do not delete existing from either install. Map is shared, poi is shared...
Coals, it all works in both.
Hdfanatic
Click to expand...
Click to collapse
hmmm, not sure how can i use shared folder, as android needs folder called igo, and WM needs folder called igo8. with all subfolders needed in those.
so not really see how can .. for example /content/maps be shared in
/storage card/igo & /storage card/igo8
but never mind, as i said .. MY problem is solved and i have working igo.
vicai said:
hmmm, not sure how can i use shared folder, as android needs folder called igo, and WM needs folder called igo8. with all subfolders needed in those.
so not really see how can .. for example /content/maps be shared in
/storage card/igo & /storage card/igo8
but never mind, as i said .. MY problem is solved and i have working igo.
Click to expand...
Click to collapse
Hi,
I followed your instruction from moving the windows IGO8 folder to the root of the sd card and renamed it as IGO (/mnt/sdcard/igo). When I launch IGO (installed IGOMyWay 8.4.2........apk), I have an error message: Missing or incomplete folder: IGO/content/lang
I have checked that the folder IGO/content/lang exists and I have two zip files in the "lang" folder. What did I miss?
NewComer68 said:
Hi,
I followed your instruction from moving the windows IGO8 folder to the root of the sd card and renamed it as IGO (/mnt/sdcard/igo). When I launch IGO (installed IGOMyWay 8.4.2........apk), I have an error message: Missing or incomplete folder: IGO/content/lang
I have checked that the folder IGO/content/lang exists and I have two zip files in the "lang" folder. What did I miss?
Click to expand...
Click to collapse
drop me a PM
vicai said:
drop me a PM
Click to expand...
Click to collapse
It works fine with your advise... thanks alot
NewComer68 said:
It works fine with your advise... thanks alot
Click to expand...
Click to collapse
you are welcome my friend
There is iGo for 320x240, 320x480 and 800x480. Now once you got the right apk for you screen size you still need maps. Here is the link where you can find the LINKS DELETED LINKING TO PAID APPS / WAREZ