Hi,
First sorry for my english
I have a big problem, when i am using a data conection and anybody calls me, i cant answer this call, and when i try to call while i using a data conection this disconnect, its is a normal situation?
I will try to explain using a google traslator:
Good Afternoon,
For this occasion I am using the google translator.
I have a big problem with my Titan when I'm using my data connection and someone makes a call, for some strange reason I can not answer, even though I press the button I can not answer before it was thought that the application had S2U2 this problem, but I did a hard reset and did a test with the phone without any application and the same thing happens again.
I also noticed that while I'm using my data connection and I want to make a call, to make the device switches off, what I want to know is if this is normal behavior or is there a way to configure my computer so that this does not happen, Thank you.
imohtep said:
Hi,
First sorry for my english
I have a big problem, when i am using a data conection and anybody calls me, i cant answer this call, and when i try to call while i using a data conection this disconnect, its is a normal situation?
I will try to explain using a google traslator:
Good Afternoon,
For this occasion I am using the google translator.
I have a big problem with my Titan when I'm using my data connection and someone makes a call, for some strange reason I can not answer, even though I press the button I can not answer before it was thought that the application had S2U2 this problem, but I did a hard reset and did a test with the phone without any application and the same thing happens again.
I also noticed that while I'm using my data connection and I want to make a call, to make the device switches off, what I want to know is if this is normal behavior or is there a way to configure my computer so that this does not happen, Thank you.
Click to expand...
Click to collapse
Move to general as not rom development
Related
hey there.
i do have a strange prob after the regular update (phone tells me, there is an update available... clicking YES i WANT it... downloading, restart, etc.) of my sapphire:
if i want to call someone i just get a busy sound (beep beep beep... so on. u know ). it doesnt matter what number i call or what programm i use for it.
i can recieve calls like before, no prob there.
the same with SMS sending: doesnt matter what program i use (handcent, build in): after clicking the send button it takes a while and i get the message: sending not possible.
recieving SMS works fine.
i DO have a good cell connection and i CAN use 2G or 3G internet browsing. WLAN works, etc.
everything is working like before.
Anyone experienced similar "behavior"?
Any ideas, what that can be?
If there is nothing coming up here i think a wipe and reinstall is the best try?!
thx a lot.
necro-flo
SOLUTION...
In a German Forum (http://www.android-hilfe.de/vodafone-htc-magic-forum/8772-kann-keine-sms-mehr-schicken.html) i found some useful hints.
My solution was:
putting another SIM card (mine was SIMYO (german), change card was debitel (german)) in the phone. with this card everything worked fine.
so i put my card back in... and: voila! it worked as well.
VERY STRANGE.
dont even now if my action was part of the solution, but it works now.
no restart, etc. helped before.
necroflo
Are you using google voice as your default dialer? If so, toggle or disable and try again.
Problem back
Hi again,
mysteriously the problem came back, and today i cant fone or send sms again.
the only "work around" solution at the moment is using APNdroid to kill the internet connection, and then the fon will work again.
but this is really annoying....
any ideas?
btw: i´m not usin google voice at all (i think)
using starcontact or the "standard" dialer that comes with android....
necroflo
I've had a few users of my ROM mention that they can't use the phone and still have 3G active at the same time. As soon as you make a call, the 3G connection stops.
I've tested this myself...the 3G icon still shows, but no data can transfer until the call is ended...a good way to test is to do a speed test or download while making a call.
They say the stock Telstra ROM does let you do both, so obviously I have missed something somewhere...
Does anyone know what it could be?
Appreciate any help on this one...
oh! maybe im wrong but if you are using 3G data call you must to wait for it to end, then make a voice call
According to the user, you canuse 3G data connection to download and still make a voice call at the same time on the official ROMs. On my ROM it doesn't work.
neither in my rom you know...
In the canvas mui.. are a dialog square saying... please wait til the data call ends to make a new voice call.
Maybe im wrong.
Yea, they don't want to make a data call and voice call...they just want to keep using 3g data connection while making a voice call...they dont want to make a data call.
try using telstra dialer and dependent pkgs see if it works then.
I got my epic recently and use it a lot for work. I have google voice installed so I can make calls over my wifi and not use any minutes. I have ALOT of minutes for work purposes working from home since I have no home phone. While the call works fine, my touch tones do not seem to go across fully. It recognizes some keys like if I press #. However, I always get invalid entry so something isnt working right. Anyone have any idea on how to resolve this?
How are you able to make calls? When I try to do this over wifi, I get an error message saying that i need to be connected to the network even though I am. Please let me know how I can use my wifi connection and make and recieve calls.
I was wrong anyways Google voice just acts as a middle man and still uses minutes. There is a way to use sipgate to use wifi but I haven't yet.
Sent from my SPH-D700 using Tapatalk
Hi, I'm new at this android thing, I got a samsung galaxy s plus, everything seems fine but one problem, when I am connected to my wifi and every time I want to call someone when I press the call button and enter the number and press the green call button it starts asking me to use SIP calling, I don't want that I want to use my cellular network to call, is there any way? Or do I have to turn off wifi every time I want to call?
Did you install any SIP software? Do you have a good cellular reception?
I have never experienced this issue while on wifi (and at home I'm almost always on wifi).
aside from Skype I have something called voipalot i use that for international calls
What happens when you remove this app? Skype should not be the culprit, have this installed too. No problems with it.
Sent from my GT-I9001 using XDA App
I had this problem with skype installed... Whenever I tried to make a call, a pop up usef to ahow up, it gave me 2 options, Skype and Phone... to avoid further pop ups, just click on 'use this program as default' check box at the bottom and select 'Phone'..... Pop up will not happen again...
I use csipsimple for me is the best.
So far it seems everything works as it should with my watch but I do not get notifications when an incoming call comes through to my cell. Anyone else had this problem or know how to fix it? Also I'm not connected VIA SIM card and don't plan to do so. Any help is appreciated!
Sent from my Android using Tapatalk
For anyone who may run into this. Note this is only for those who don't activate the LTE sim and add to your plan
- factory reset
- let AW update to latest
- update all apps
- disable SIM
- DO NOT SETUP THE CALL SETUP APP
Hi,
I have the exact issues of calls not notified.
Are the update (last part) of your post the fix for it?
Thanks!
Cryo86 said:
Hi,
I have the exact issues of calls not notified.
Are the update (last part) of your post the fix for it?
Thanks!
Click to expand...
Click to collapse
Yeah give those steps a try. It takes some time because you have to let things update. I'd suggest trying to get your WiFi setup so it can use that to update and keep your Bluetooth off until it's done otherwise it'll try and do so through Bluetooth and that's just too damn slow.
Sent from my Android using Tapatalk
dwbentley said:
Yeah give those steps a try. It takes some time because you have to let things update. I'd suggest trying to get your WiFi setup so it can use that to update and keep your Bluetooth off until it's done otherwise it'll try and do so through Bluetooth and that's just too damn slow.
Sent from my Android using Tapatalk
Click to expand...
Click to collapse
Thank you for such quick reply! I'll go ahead and follow your steps!
Have a great weekend!
dwbentley said:
Yeah give those steps a try. It takes some time because you have to let things update. I'd suggest trying to get your WiFi setup so it can use that to update and keep your Bluetooth off until it's done otherwise it'll try and do so through Bluetooth and that's just too damn slow.
Sent from my Android using Tapatalk
Click to expand...
Click to collapse
My call notification is working now after resetting. Thanks a lot!
Cryo86 said:
My call notification is working now after resetting. Thanks a lot!
Click to expand...
Click to collapse
Awesome. Now you get to enjoy all the perks. Only thing you can't do is take a call with the watch. Honestly I don't see a good use case for that anyways. My use case is to be able to ignore calls without having to pull my phone out. Very handy in meetings.
Sent from my Android using Tapatalk
dwbentley said:
Awesome. Now you get to enjoy all the perks. Only thing you can't do is take a call with the watch. Honestly I don't see a good use case for that anyways. My use case is to be able to ignore calls without having to pull my phone out. Very handy in meetings.
Sent from my Android using Tapatalk
Click to expand...
Click to collapse
Yes! Thanks for your help!
The main use for me is similar: being able to see who's calling and decide if I want to reach for my phone
Also, I just realized the way the watch is connected matters to call notification as well. Hope it wasn't something everyone else already knew:
I found out watch screen notification for calls will only work when airplane mode is turned off (even with sim disabled) and watch is connected to the phone through bluetooth. Wifi on watch wouldn't do the trick. If airplane mode is on, the call screen will not come on no matter what type of connection there was.
According to some users, using only BT connection saves battery life anyway!
Cryo86 said:
Yes! Thanks for your help!
The main use for me is similar: being able to see who's calling and decide if I want to reach for my phone
Also, I just realized the way the watch is connected matters to call notification as well. Hope it wasn't something everyone else already knew:
I found out watch screen notification for calls will only work when airplane mode is turned off (even with sim disabled) and watch is connected to the phone through bluetooth. Wifi on watch wouldn't do the trick. If airplane mode is on, the call screen will not come on no matter what type of connection there was.
According to some users, using only BT connection saves battery life anyway!
Click to expand...
Click to collapse
I'm not sure what the conditions are, but I'm getting incoming call notifications on my wear 24, and I run in airplane mode with all radios except Bluetooth turned off...
Make and receive calls
After phone is setup and no calls or incoming calls that's all I found you do was go to settings, apps, system apps, Verizon messages app and disable and then enable and back to main screen click calling setup and 911 address page comes up click address to use and you should see phone calling activated pop up on screen and should then be able to make and receive calls but you'll need to connect earbuds or headset because Mic was disabled after 2.0 update. Hope this works. I did notice the first time doing this you have to click on remove updates.