Phone start, but windows stuck - Omnia II General

Hi to everyone!
I have O2 maybe 10 months and I flash my phone few times, last time was today and every thing working fine.
And,
my friend came with same phone and I done same like on my phone, I flashed all parts with Octane 2.14. During process everything look fine.
When phone start, windows stuck in Align Screen, I can do this countless time and windows don't accept this just repeat this.
So please any help about this will be very appreciated, or some advice.
I must fix that soon, if it is possible, because he must go to trip, and I must save friendship.
Many thanks to everyone who just to try think about this!!

Related

My o2 xda mini s is dead I think :(

Right i need some help, big style.
Had me phone now for nearly a couple of months and it's been fine. Then today it all went wrong. Firstly the phone just did'nt work no signal or anything. Tried everything to fix but nothing seemed to work. So hard reset. Now the phone boots up and goes thru setup etc.. (but no 02 option??) gets to my today screen but when I choose anything i get a msg saying did i want to run unknown program etc.. choose yes/no. I have chosen all the combinations to get it to work but the phone sometimes freezes so i have to soft reset to get going but then I'm back to square one. I've downloaded the backup o2 rom but when i run it i get an error saying it cannot create a folder??? So at the moment i can use the phone sometimes but sometimes it freezes up 9/10 i cant sync with comp.
Before you ask I only have tomtom installed and afew themes, and the xda worked fine before hand.
Any ideas please would be a great help. If not I'll be straight on the phone to o2 to get a replacement.
cheers
screen shot of the error msg i get
screen shot of the error msg i get
Right getting really annoyed now with my phone :evil:
managed to get it working again after downloading the o2 rom and re-flashing. Since i started this thread i have re-flashed rom about 3 times!!!! My phone just stops working. No network signal or anything!!! All the problems started after i install wisbar, phones never been the same since. stoped using wisbar and started pocket plus. phone worked fine until i soft reset cus it frooze. when it restarted nothingworked. I'm just about to flash again for the 4th time. Only gonna install tomtom and eten dialer and afew games thats it. I'll install in basic mode but wont delete any o2 files as normally do. If it goes again after this it's going back to o2.
cheers
Well, simply send it back for warranty repair, what's the problem? These things happen, I'm used to that... had to bring my Nokia 6600 back 2 times during warranty year... :?
does it damaged the phone if your constantly re-flashing the rom?
Sorry to keep posting but is there an anti-virus software or something cus i think there must be something on my xda cus even after flashing the phones still not 100%
cheers
Keep in mind, by the way, that flashing your rom with any ROM other than one provided to you by your provider is grounds for voiding your warranty
yeah I know i just thought that may fix whatever problem there is. I think i've just got a dud mini s. Worked fine for a month but now it's gone crazy. I think re-flashing with the o2 rom 5 times and still no joy means the phone will go back.
I'll ring o2 first thing in the morning.
cheers

HELP - Major Perfromance Issues with O2 XDA Flame

Please help, I recently bought the O2 XDA Flame. I had been using the device for a couple of months. As time went on the speed of the phone has deteriorated. At first i thought it was nothing, so i would restart the phone. But then came another issue, after the restart the device would take even longer respond to any command. It would just hang during phone calls also would have isseu with opening the contact etc. I even tried to Hard reset the darn thing but it would not work and would just keep hanging on me.
Please if anyone has any information it would be helpful!!!
Help Help Help!!!
nbkn8ct said:
Please help, I recently bought the O2 XDA Flame. I had been using the device for a couple of months. As time went on the speed of the phone has deteriorated. At first i thought it was nothing, so i would restart the phone. But then came another issue, after the restart the device would take even longer respond to any command. It would just hang during phone calls also would have isseu with opening the contact etc. I even tried to Hard reset the darn thing but it would not work and would just keep hanging on me.
Please if anyone has any information it would be helpful!!!
Help Help Help!!!
Click to expand...
Click to collapse
sounds like it could be HW issue or SW as well. if it's still covered by wty better send it to SC. we don't want to void the wty right? hehehe if WMG has ROM upgrade you may want to try and upgrade it and see if problem still persist

new trinity

Hi, I have just received my new (to me) SPV M700 from a guy on the internet.
It was originally locked to Orange. Has been flashed a few times by previous owner and has Ausdim on it (don't know what I'm talking about as am new to this stuff). It's been unlocked and upgraded to WM6.1, also has Tom Tom and European maps.
I put my O2 sim in and turned it on. What I got was a white screen with the words HTC, also MO5, BO5, DO3 Ausdim, and a tune played, then windows 6.1 screen came up. That's it. Nothing else happens, phone doesn't work, in fact nothing works. Oh yes, a green light at the top right hand side flashes occasionally.
Also, l had three new styli shipped from Japan. Pushed the white end onto the pen and inserted it into it's appropriate place on phone. Came to get it out and the end has come off leaving the stylus in the holder inside the machine. Oh dear. Not my day is it.
Any advice would be appreciated.
I have experience of flashing psp's and using pandora batteries so the prospect of fiddling with flashing is not totally scarey to me. But I did get to know the machine first and read a lot before trying it. Don't want to rush into such stuff with this phone if there is a simpler solution.
Cheers
Puddle
Hi guys,
I realise I may have upset people by posting a question before I have contributed anything to the forum.
Will be happy to do so when I have the phone up and running.
Here's a quick introduction......... if that's the protocol.
Am a retired aged person who loves tinkering with new technology. Was first introduced to computers with the Sinclair ZX81 which had 1k of ram, yes 1k!
I even got a 16k rampak for the back. Such wonderful technology, I also had a fiddle with machine code programming.
Then I got a Commodore 64, more fun. Later on, I got a Psion, again more programming and compiling fun. Then laterley I have a couple of pc's and a laptop. Also got recently a psp and liked it so much that I bought another one with custom firmeware on it. Have had lots of fun upgrading and such.
Just got a garmin for the car too for when we go off to France for a few months with caravan.
Just a quick introduction as to who I am. Have had a look at some of the posts and I have lots to learn. Thanks for making it happen to a golden oldie.
Cheers
Puddle ('cause my hobby is scuba diving)
Hmmm....I feel for you. My Trinity has the original wm5 rom, when I boot it up it starts with the white HTC screen you described but then kicks into windows. I doesn't sound good!
As for contributing first...don't stress about it. We all have to start somewhere
Thanks for the reply, the chap who sold me the phone is going to ring me tomorrow to see if he can sort it out.
My sim is a non 3g, is it possible that this could be the problem?
If it's something so simple I should be lucky.
I was really excited about getting the phone - a bit of a bummer that it isn't working.
Cheers
Lyv
I don't think it is the sim! Does the device boot without the sim? If not then it something deeper!
No, it is exactly the same with no sim in. Oh dear.
Perhaps it can be remedied by re flashing ??? The guy who previously flashed it may have the solution.
Cheers
Lyv
puddlediver said:
Hi, I have just received my new (to me) SPV M700 from a guy on the internet.
It was originally locked to Orange. Has been flashed a few times by previous owner and has Ausdim on it (don't know what I'm talking about as am new to this stuff). It's been unlocked and upgraded to WM6.1, also has Tom Tom and European maps.
I put my O2 sim in and turned it on. What I got was a white screen with the words HTC, also MO5, BO5, DO3 Ausdim, and a tune played, then windows 6.1 screen came up. That's it. Nothing else happens, phone doesn't work, in fact nothing works. Oh yes, a green light at the top right hand side flashes occasionally.
Also, l had three new styli shipped from Japan. Pushed the white end onto the pen and inserted it into it's appropriate place on phone. Came to get it out and the end has come off leaving the stylus in the holder inside the machine. Oh dear. Not my day is it.
Any advice would be appreciated.
I have experience of flashing psp's and using pandora batteries so the prospect of fiddling with flashing is not totally scarey to me. But I did get to know the machine first and read a lot before trying it. Don't want to rush into such stuff with this phone if there is a simpler solution.
Cheers
Puddle
Click to expand...
Click to collapse
Before thinking about reflashing, try Hard Resetting. Be warned: you will lose all data on your phone! ...but it could be a solution for your problem.
Thanks for the advice, will speak to the guy I bought it off tomorrow evening and if we don't get anywhere consider the hard reboot. (under guidance).
Regards
Lyv
Sorry.
It was my phone you bought so hello again! It's very strange that it's not getting past the Windows 6.1 splash screen even without a SIM as it was booting fine when I sent it and if it isn't getting past their even with the SIM removed then it may be something more intrinsic although I don't know what.
Hard reset the phone by pressing and holding both the soft keys and then using the stylus to reset the phone and follow the prompts, it will erase TomTom but you have all the back ups to reinstall that and I'll ring you and talk you through the process.
If the hard reset doesn't work then I'll shove a Mini SD to SD card converter in the post to you and walk you through flashing a new ROM from the memory card and if that doesn't fix it then I'm stumped and I'll give you a refund, but I'm sure it won't come to that.
Sorry for all the hassle!
Mike
Or if you're still awake feel free to ring me (don't mind returning the call to save your phone bill) and I'll try and talk you through everything now as I'll be up for an hour or two yet, you should have my phone number in the PM I sent you on YD.
Thanks for the reply Mike, would have been tucked up in bed when you posted so will speak with you tonight. Give me a bell on my landline, notified on yd site pm. I could ask a silly question.......did you load WM6.1?
Cheers
Lyv
Oh dear, all our efforts failed Looks like it's dead. Could have been dropped in transit, thank goodness for insurance.
Will have to look for another phone now.
Cheers
Lyv
not even flashing the firmware again helped ?
Soft and hard resetting does nothing. I tried connecting the device up to my pc with the usb cable but xp didn't have the drivers so can't access via that method.
Thanks for the reply anyway.
Lyv
You need to download and install Active Sync (at least version 4) before Windows XP will recognise the phone.
Get it here
Thanks IK, will download and try again. I was on an older version of activesync from when I used to use the IPAQ.
Cheers
Lyv
Upgraded my activesync to 4.5 and connected trinity. xp detected that a usb device had been added and activesync attempted to connect. At the end it gave up with a message that the connection to the windows mobile device couldn't be made.
The device itself had the red light at the top to show that it was taking power from the usb and the wm6.1 splash screen is still showing.
No joy, must be dead.
Thanks for help
Lyv
I shall be writing a long, complaining letter to Royal Mail
From what the OP has said it sounds like the phone's reset button isn't working at all as she can't get the phone to enter bootloader or hard/soft reset the phone and the only way to power it down is to remove the battery so it sounds well and truly bricked.
I'll have a play when it gets sent back to me and may ask you guys for some help sorting it but I'm not hopeful.
Hi Mike,
Money arrived in Bank account. I've posted your phone etc back to you today, special delivery, so you should get it tomorrow or Saturday at the latest.
Hope you get some joy from PO.
Cheers
Lyv
Still looking for a phone ...... ah hum, am even thinking of the mda vario II
Got a new phone on the way now - it's an xda trion. Yes, I know, not one of yours.
However, I'm sure I will get loads of fun out of it.
Over to the Hermes sub forum for me.
Cheerio
Lyv

Is my HD2 toast?

I've had my hd2 since mid-April and really has not given me any issues or problems until a few days ago when the touchscreen began to not respond as it would normally. I would have hang-ups on the lockscreen but it eventually respond and unlock after a few tries. Now, however, my phone refuses to unlock itself and every once in a while it will actually respond. I've hard reseted dozens of times, couldn't change roms as the computer doesn't even detect the damn phone in activesync, and now I'm back to using my old Nokia n95(man that thing is reliable). Are there any solutions or advice to help this situation? Or should I just call Tmo and have them send me my casket for this phone? Any help will be greatly appreciated....
you can flash roms from bootloader, phone doesn't have to be running and connected to active sync
Really? May I ask how do you do that?(sorry for being noobish) just that its my first time running into this problem since I got this phone since April.
Ah nvm, I figured out how to do it, still didn't solve the problem, screen isn't responding at all....time to order a replacement....awesome
ah well, better luck with the next one.

HD2 Freezing Please help

I've had my phone for about 6 months. It was working fine, but lately it's been acting really strange. It freezes on boot and get stuck on the "Stick together" screen.
I've tried a HR, Update and it still persists.
I've wanted to flash a custom rom, but the phone also freezes on the boot loader so i can't even get the flash to follow through.
The one time i got the tmobile's latest flash update to work. It rebooted the phone and then the problem was still there. With it getting stuck on the "Stick together" screen.
A few times when i tried booting the phone, the phone vibrated 7 times and then turned off.
I've looked around the forum and searched for quite some time but haven't found anything. (It's a pretty big forum so i may have missed it). I will continue to keep looking but if anything has a fix or can help me please do.
Thanks!
(Glad to finally be part of this community)
-Raymon
Sounds silly but try these two things.
1. There are some pins on the battery that can be easily bent. Inspect them to make sure they're ok. There are usually other symptoms with this though, such as it won't take a charge or won't start at all, just thought I'd mention it.
2. Try it without the SD card in.
Hey, thanks for the reply!
The phone charges fine with the usb cable. It's at full charge right now actually.
I took out the sim card and sd card when i did the HR and before i put those back in, the phone still froze on boot.
Really not sure what's going on, I'm going to try flashing it again when i get home. But last time i tried, it got stuck at 0% and then my phone froze, was scared it was going to brick, but i don't think it did.
Any other insight would be great, i really hope to resolve this issue.
If any other information is needed, please don't hesitate to ask. I can provide as much as possible to get to a conclusion.
Thanks,
-Raymon.
I got the same problem -- freezes and 7 vibrations before it. I made formatting with mtty (task 29 and task2a), it didn't help.
Anybody knows about 7 vibrations signal? Is there leodiag like blackdiag for HD?
That 7 vibrations HAS to mean something...but i'll be damned if I know what. People in both Leo sections keep saying that their phones vibrate 7 times then shut off, and I don't know what that really means....some investigation is in order!
Just got done talking to t-mobile, my replacement is on it's way, still very weird.
Would love to know the solution to this.
Please tell me can I replace my faulty HD2 from T-Mobile? I bought it in Frys without contract and used it with another provider. I never had a T-Mobile contract.
KOCTA said:
Please tell me can I replace my faulty HD2 from T-Mobile? I bought it in Frys without contract and used it with another provider. I never had a T-Mobile contract.
Click to expand...
Click to collapse
same here, bought the phone on Ebay and i live in Albania.
i have the 7 vibrations and then i have to take off the battery , leave the phone cool down so i can use it again for the next 10-20 minutes and then back to the vibrations
I have the same problem, mostly when i used GPS application, the phone reboot then vibrate one on th esplash screen then 7 times and freeze, the solution for this is to remove the battery for 10-20 minutes, pray and put it back, it is very annoying. I have this problem with ROM including the stock ROM.
hd2 freezes on BOOT!!!
try to take out the sim and leave the SD card in you will notice that it will work much better and get past the stick together screen ..mine does the same thing i think i may theSIM card but who know??
Nice suggestion, but totally useless.
I think these 7 vibrations means fault in NAND operation, but didn't find any approves.
I've this problem too.
7 vibration and freeze.
I've try update new radio, task29, new custom rom but nothing better.
Did anyone found any solutions, Please share.
Thank you.
mine got same problem.. i put the hd2 in freezer (without battery) for 3 minutes, then take it out.. put battery.. and my hd2 can start.. but after a while, when the cold is gone.. my hd2 will off it self.. hehehe
Any solutions?
I have the same symptoms, though the vibrations aren't that frequent, as much as stucking is..
I am not in a position to get a replacement, what do I need to fix?
This seems to be a heating problem, the freezer solution seems to work

Categories

Resources