Hello Guys
I have a doubt.. I can never find a way to turn the speakerphone on after answering a call and begin it listening from the earpiece from the start; I only get the caller picture but no options on the screen when I put away the phone from my ear..
do you have this issue too?
thanks
Under the pictture and callers number there are 15 dots in a 3 x 5 square an arrow and the words slide down for more options the bottom left box is the speaker phone option.
This is on a stock 1.72 rom on vodaphone don't know if it is different on other roms.
Related
I am using Wizard with WM5.0. The phone software is the default one.
When you dial a service hotline, you normally hear the voice prompt: "English Press 1, French press 2"... How to press the 1 and send the DTMF touch tone over to the service provider? I tried press 1 but there is no DTMF tone generated?
Thanks in advance for anyone who can answer my question.
Strange - it's working (and has always worked with all the ROM's) great with my Wizard. In addition, Menu / Options /Phone / Keypad doesn't have any effect on what is sent out to the other party.
Try doing this with as many DTMF-based services as possible to find out whether it's a problem with the particular service you've called up or a generic one.
In the phone app, you should press "keypad" button to bring back the phone keys during the call to generate DTMF.
Hi, Menneisyys,
I have tried to call two different hotline. I failed to get throught the first question such as : "Press 1 for English, Press 2 for French...". It seems that these two service provider do not have problem as I can call them by my land wired phone.
Hi, micvario,
Yes, I am able to go to the Keypad. But pressing any digits does not send any thing to the hotline...
Very strange....
Hi, when you use the keypad, do digits appear on the screen and can you also hear the tones from the speaker? If so, I suspect the problem may be with the signal quality..
Hi, micvario,
Yes. The digit appear on screen and there is tone from the speaker....
ok,
1) you can call your own landline to listen if tones are really transmitted
2) check signal strenght; i guess if its zero or one bar only, you may not notice in speech but it could be a problem for tone processing at the other end... try to increase and try again..
3) if there are loud background sounds like music, traffic, this may also interfere with the tones..
Hi, micvario,
I made a mistake last time.... (Haven't try this for a few days).
When I press "1", "2".... during a call, I can't hear any DTMF tone generated.
Is mostly a hardware error or software error?
Thanks
wqiiqw
I'm having the same problem
I'm having the same problem. Since I'm using PV4 when I press the keypad I can hear the tone, but no DTMF are sent to the other side of the line.
No DTMF during call
I'm having the same problem. I can hear the tones and the numbers are displayed but not sent across the line. So, I can't delete voice mail. HELP! I also had some one on a voice call tell me they couldn't hear the tones.
Anything further on this? I have the same problem on my desire z. Can hear the tone on my end but no recognition on the receiving end...
Hi
when I’m making a call my ear is hitting some of the number buttons??
I here the number tones as my ear hits the buttons and when i have finished the call there are number in the dial box? o and the screen is black when in the call?
Can any one point my to a fix for this problem.
I have Dutty's HG R9 on my TD2, and using TD Tools 3 I've switched off the HTC Phone Dialer Canvas.
I do have the "mute ring on phone facedown" option enabled, but it doesn't seem to take effect.
When my phone is locked and I receive a call, I get a green accept slider and a red ignore slider. The ignore slider does the same thing as the End/hangup key - sends the call to voicemail. I don't see a way to simply silence the ringer without taking any action regarding the incoming call itself.
When my phone is not locked and I receive a call, I get a popup from the bottom of the screen, in black & white, with an answer button and a hangup button. Pressing the hangup button does the same thing as the End/hangup key - sends the call to voicemail. I don't see a way to simply silence the ringer without taking any action regarding the incoming call itself.
How, using the basic WM6.5 phone-is-ringing software (not sure if this is the Dialer? anyway...) with the HTC Phone Dialer canvas switched off by TD Tools 3, can I mute an incoming call withOUT rejecting / sending it to voicemail?
Thanks!
Eliminate "Print via Bluetooth" menu option?
I have Dutty's HG R9 on my TD2. I would like to eliminate the Print via Bluetooth menu option. How do I turn that off?
Thanks,
Jay
Prevent "the answering modem has disconnected" pop-up entirely?
I have Dutty's HG R9 on my TD2. Each time I restart the device, before it asks me for my device unlock password and my SIM unlock PIN, I get the annoying "The answering modem has disconnected" pop-up.
Of course the answering modem has disconnected - the phone is still off!
How do I disable this pop-up, at least so that I don't see it when the phone is actually off (and the software shouldn't be trying to make a data connection through the phone then anyway)?
Or if that fine grain of control isn't possible, how do I disable the message completely at all times?
Thanks,
Jay
You can silence the ring by touching the volume key one time.
Nope, the volume slider/rocker doesn't affect the volume, either with the phone locked or unlocked, once it starts to ring... :-(
Then there's something wrong, because it works for me.
libove said:
I have Dutty's HG R9 on my TD2, and using TD Tools 3 I've switched off the HTC Phone Dialer Canvas.
I do have the "mute ring on phone facedown" option enabled, but it doesn't seem to take effect.
When my phone is locked and I receive a call, I get a green accept slider and a red ignore slider. The ignore slider does the same thing as the End/hangup key - sends the call to voicemail. I don't see a way to simply silence the ringer without taking any action regarding the incoming call itself.
When my phone is not locked and I receive a call, I get a popup from the bottom of the screen, in black & white, with an answer button and a hangup button. Pressing the hangup button does the same thing as the End/hangup key - sends the call to voicemail. I don't see a way to simply silence the ringer without taking any action regarding the incoming call itself.
How, using the basic WM6.5 phone-is-ringing software (not sure if this is the Dialer? anyway...) with the HTC Phone Dialer canvas switched off by TD Tools 3, can I mute an incoming call withOUT rejecting / sending it to voicemail?
Thanks!
Click to expand...
Click to collapse
Set phone to quiet ring on pickup in Sounds and Display settings.
Not sure how to get it to mute, maybe S2U2 can do this, or find another dialer with this capability.
There is no "quiet ring on pickup" under Sounds and Display settings in this WM6.5.5 based build...
Is there still no solution? I also would like to mute a incoming call... like the old phone canvas...
Any ideas?
Try Advanced Configuration Tools.
Hi there everyone.
I am a new user of an HTC Hero.
I have a problem on incoming calls or sms.
I leave the HTC to lock by itself and, when i have an incoming call or sms, only the screen turns on. I can see the number of the dialer who is calling me on the screen but NO ringtone sounds from the phone. The same problem occurs when an sms is received. No ring is sounded by the phone.
I have checked everything concerning the sound preferences and (i believe) that i have not left anything un-touched.
Can anyone please "save" me from madness???
Thanks in advance!
I can't say for sure this is what happened, but humor me for a second and check a few things:
Of course double check that your volume is all the way up.
When you use the volume rocker on the side of the phone, does it beep?
Do you have any music on it? If so, play it without the headphones plugged in. Do you hear the music?
When you turn speakerphone on during a call, do you hear the other person?
Do you hear any of these sounds using headphones? Do you hear people through the earpiece on a call?
If you don't hear any sound from any of the first few bullets, but you do hear things through the headphones and earpiece, it may be the speaker in the back that's broken. Again, this is just one possible cause, but I had it happen to me. I have no idea how to fix it other than to send it back to HTC or attempt to replace it yourself (I don't know how to do this and would not recommend it if you're not comfortable with it!). Thankfully, my phone fixed itself after a few days (well, with a little help, I accidentally dropped it on the floor from a height of about four feet, but again, I wouldn't recommend that!). Anyway, just a thought, hope it at least helps you diagnose the problem.
Hi,
I don't know how but now I have 2 ugly buttons on my incoming call screen instead of 2 wheels.
Anyone knows what I can do with this to get those wheels back ? I've allready rejected a few calls just by getting my phone out of my pocket. This is very very very annoying.
Please help.
Ok. I know that it's the Car mode that causes the incoming screen to change.
But now how can I enable Car mode (I got used to the phone reading whos calling and from whom an SMS came when I was on my S3) but to stay with "normal" incoming call screen ?