keep getting error 270 any one know what that is all about
c1bear said:
I hope some one can help me whit this error, i try flashing with ttrans new rom,
and keep getting error 270 i flashed the stock rom from t mobile site and now im getting the same thing and i try to flash back to v 3.0 and the same thing, ive reinstalled active sync but that didn't help some out there know how to fix this,
any advice would be greatly appreciated
Click to expand...
Click to collapse
Hey, I ran into the same problem, and couldn't figure out why. I tried just about everything, (enabling advanced networking), etc...but I ended up hard spl'ing and now I never have any issues flashing. I would recommend doing that first. If you have any questions about it, just pm me.
ERROR 270
I have the same error - I have tried to flash it again and I still get hte same error... I erased the Flash Center directory, tried to use the old one - the one I flashed OT 5.3... But I still get the error - actually with the old flash center everything seems to go correctly but ultimately o reboot, OT5.0 is on not the new one!!!
Any other suggestions?
RaphB
are you using the USPL flash center or the HardSPL flash center. If your phone is not HardSPL'd you shouldn't try to use the HardSPL flash center for it. Conversely, if it IS HardSPL'd, you shouldn't use the USPL flash center with it
I had an AT&T Tilt with a data plan. It worked well. I Just recieved the HTC Touch T8285 which I purchased. I installed the SIM card and the phone work well. I noticed that the internet does not work. Can someone give me some gudance on what I need to do to get the data connection to work over the AT&T network.
Thank you.
if i remember correctly, it's because the the Telstra ROM locks the data connection to Telstra's service. did you add at&t's connection settings to your device? if so, i take it that didn't work so i'm not sure if there's a workaround when using the stock Telstra ROM. as soon as i got mine, i applied the HardSPL package and then flashed a custom ROM. after doing this, the phone automatically configured at&t's internet settings and i've been good to go ever since.
I am getting a little confused on which 1.56+ base rom to use for the flashing. Can you help. Not an expert in this area, but did alot of reading to educate my self.
Thank you in advance.
contig said:
I am getting a little confused on which 1.56+ base rom to use for the flashing. Can you help. Not an expert in this area, but did alot of reading to educate my self.
Thank you in advance.
Click to expand...
Click to collapse
search the Available Blackstone Shipped ROMs for a WWWE (WorldWideEnglish) 1.56 ROM and you should be good to go.
I found the ROM I need. I trying to run HSPLWrapper_Blackstone_1560liNex.exe. Tried several times. Getting a "error 262" ? Any suggestions?
contig said:
I found the ROM I need. I trying to run HSPLWrapper_Blackstone_1560liNex.exe. Tried several times. Getting a "error 262" ? Any suggestions?
Click to expand...
Click to collapse
not trying to be rude/contrite/an asshole, but if you read the Tutorial (from my signature) there are troubleshooting guides for the error codes and other issues to complete the HardSPL. i know it's a painfu/steep learning curve (that we all have to complete), but once you complete the process, you'll be better equipped for your next flash. my recommendation is to create a checklist of ALL the steps (e.g., using Word, Excel or a piece of paper) required to flash a new ROM and use that as a guide. good luck!
O.K. got through installing the HSPL (HSPLWrapper_Blackstone_1560liNex.exe). The issue was that I when into the boot loader manually rather than allowing the HSPL application to do it. I have a distorted color screen. I did a alot of reading and I believe I did it right. I also installed the 1560liNex twice. It did not help. When the HTC touch HD is booted up in has the disported colors. It appears to go away after the sleep mod. I seen some posting on this, but I do not seem to find a resolution. I verified in boatloader that I am running "SPL-560liNex" The ROM version prior to this was "1.21.841.1" Should I proceed to install "RUU Blackstone HTC WWE 1.56.405.1" hoping that the color issue would go away or continue to try to resolve the distorted color issue? You comments would be appreciated.
Thank you,
the only way to validate you've updated your SPL is to go into bootloader mode and confirm that you see "SPL 1.56 Olinex". once you install SPL 1.56 Olinex, you have to use a 1.56 (or newer ROM).
hi guys,
im attempting to update my hd2 but cannont. i sync it with active sync, start the update and it changes the phone to the tri color screen, but immediately disconnects on the computer, and a 1 minute later i get the error [260] connection screen.
can anyone assist me with updating? i also heard there is a way to update from the memory card...that might be the best way for me if someone can help me with that. THANKS
trexxcrap2 said:
hi guys,
im attempting to update my hd2 but cannont. i sync it with active sync, start the update and it changes the phone to the tri color screen, but immediately disconnects on the computer, and a 1 minute later i get the error [260] connection screen.
can anyone assist me with updating? i also heard there is a way to update from the memory card...that might be the best way for me if someone can help me with that. THANKS
Click to expand...
Click to collapse
What are you trying to update it to?
secano said:
What are you trying to update it to?
Click to expand...
Click to collapse
the new update that came out a few days ago....
trexxcrap2 said:
im attempting to update my hd2 but cannont. i sync it with active sync, start the update and it changes the phone to the tri color screen, but immediately disconnects on the computer, and a 1 minute later i get the error [260] connection screen.
Click to expand...
Click to collapse
Here is a link to the error codes. Your error means you need to go back to SSPL before you can flash that ROM.
trexxcrap2 said:
i also heard there is a way to update from the memory card...that might be the best way for me if someone can help me with that. THANKS
Click to expand...
Click to collapse
Here is a link to my tutorial on how to flash via SD card.
i am having the same issue each time i attempt to update my rom. error 260.
jenelson said:
i am having the same issue each time i attempt to update my rom. error 260.
Click to expand...
Click to collapse
You are still using the original SSPL (Soft Second Program Loader) which will only accept official update ROMs.
In order to flash the custom ROMs available here, you will need to flash in a HSPL (Hard Second Program Loader).
I don't know if you are totally new to flashing ROMs or not, since you didn't say and your post indicator said that was your first post here, but I would advise you to be very, very careful. In the early days (last month, actually) a TON of people were bricking their phones because they accidentally downloaded the European ROMs for the 512Leo. Ours is the 1024Leo and only ROMs designed for our phones will work.
The phone I am using is actually a replacement from TMO. I was having issues with the original device I purchased.
How do I use a HSPL or whatever... I am slightly confused but I can catch up quickly...
Thanks.
same thing happened to me, what i did was i restarted the update without disconnecting the phone from the computer, and it worked.
nyaznteen said:
same thing happened to me, what i did was i restarted the update without disconnecting the phone from the computer, and it worked.
Click to expand...
Click to collapse
I encountered the same problem and it appeared that my computer was slow in "re-recognizing" the phone. For some reason, it had to reinstall drivers before continuing with the update. After the device was again recognized, I restartde the update (without disconnecting the phone) and it continued without issue.
I had been worried that the phone had become a paperweight when I saw the tricolor screen, but everything has been fine and the upgrade appears to have worked correctly.
jenelson said:
The phone I am using is actually a replacement from TMO. I was having issues with the original device I purchased.
How do I use a HSPL or whatever... I am slightly confused but I can catch up quickly...
Thanks.
Click to expand...
Click to collapse
Think of HSPL as your BIOS (it isn't, but it may help you to think of it as such). You don't have any control over the options, but you need it to load or install your OS. Installing HSPL is simply a matter of following the directions in the link that I posted last time: http://forum.xda-developers.com/showthread.php?t=653614
Once you have HSPL installed, you should be able to "flash" any ROM. Of course, this also allows you to flash ROMs that are not meant for your phone, so that's the danger behind it.
When you visit a thread that offers a ROM, it should either have instructions or a link to instructions on how to install. If it does not, a google search for "xda how to install a custom rom" should give you a million helpful links. (This is actually beyond the scope of this post so I won't go into details)
Hope this helped some...
Same problem but i have hspl?
not sure what im doing wrong here I've installed hspl 1.42 which was enough trouble for what seemed like a pretty straight forward job. now whatever i try to install all i get is error 260? on top of this i don't seem to be able to send message tho i can receive and the camera on my phone no longer seems to work?
i am a newbie but Ive been reading and clicking and trying to install stuff for hours and hours and so far all Ive managed to do is install hspl and reduce my phones usability.
i got windows mobile device center 6.1 tried it with and without allow usb connections.
my antivirus and firewall is off.
.net framework 4 installed.
tried different usb ports
ive tried installing Duttys_Leo_Sense_2.5_5.23569.5.5.0_2.14_Holy_Grail_576MB_V4.3_WWE and a stock rom
my computer has vista 64 on it.
im hoping im just being a bit dense here please help me i just wanna join in on all this flashing fun!!
mumbles85 said:
not sure what im doing wrong here I've installed hspl 1.42 which was enough trouble for what seemed like a pretty straight forward job. now whatever i try to install all i get is error 260? on top of this i don't seem to be able to send message tho i can receive and the camera on my phone no longer seems to work?
i am a newbie but Ive been reading and clicking and trying to install stuff for hours and hours and so far all Ive managed to do is install hspl and reduce my phones usability.
i got windows mobile device center 6.1 tried it with and without allow usb connections.
my antivirus and firewall is off.
.net framework 4 installed.
tried different usb ports
ive tried installing Duttys_Leo_Sense_2.5_5.23569.5.5.0_2.14_Holy_Grail_576MB_V4.3_WWE and a stock rom
my computer has vista 64 on it.
im hoping im just being a bit dense here please help me i just wanna join in on all this flashing fun!!
Click to expand...
Click to collapse
just for kicks did you try a different ROM, find another ROM that is Compatible and try it, not saying there is anything wrong with Dutty's , but could just be the download , but not sure since you tried stock too ...
You may need to reinstall HSPL3, if you tried to flash a stock rom, and even if it failed it could have removed HSPL ...
Also try plugging the USB cable into the back of the machine
error 260 1024hd2
Hey guys,
I am having the same issue although I may know the answer but not sure how to fix it. Prior to flashing chuckyRom, I installed HSPL but I don't think I installed the correct version (still worked). So does anyone think this entire problem is attributed to initially installing the wrong hard SPL. If so, how can this be fixed? android is running great on chuckyRom but it would be nice to use a rom that is used for more than running android.
Please help, I have been in misery trying to solve this for over two weeks now.
Error 260, T-mobile HD2
Error 260 during ROM update
I had the same problem and tried everything (?)
Finally I got it work.
After I started the update the first time, I got the message, driver was not installed successfuly ...blabla
I ignored the message, tried and the connection disconnected every time again.
At the end I used another usb port and it asked me to download the CDMA driver. After download and installation, the update was in 5 min. done
Snarksneeze said:
You are still using the original SSPL (Soft Second Program Loader) which will only accept official update ROMs.
In order to flash the custom ROMs available here, you will need to flash in a HSPL (Hard Second Program Loader).
Click to expand...
Click to collapse
He was trying to install the OEM rom. I'm doing the same and have the same issues.
Error 260 on Htc Hd2 running windows mobile 7
I cannot get data on my hd2 when I installed win7 so I wanted to downgrade the os back to 6.5 but I get Error 260 when I connect to my phone to my cpu via usb. Is there a work around?
Dizzle88 said:
I cannot get data on my hd2 when I installed win7 so I wanted to downgrade the os back to 6.5 but I get Error 260 when I connect to my phone to my cpu via usb. Is there a work around?
Click to expand...
Click to collapse
Put the phone into BootLoader Mode then connect to the PC. Run the ROM.
Error 260 connection in HTC HD2
Dear all;
i have this problem in windows 7 each time i connect my phone with pc it gave me error 260 , so when i connect the usb cable i choose the first choice sync not the default one storage and it worked for me .
Ahmed Hosni
thanks for the note
fred_up said:
Put the phone into BootLoader Mode then connect to the PC. Run the ROM.
Click to expand...
Click to collapse
First time flashing the radio and kept getting error 260 from CustomRUU.
Read so many threads and all say sync the phone with your PC and run CustomRUU. Nobody said to run it under BootLoader Mode.
This simple note helped a lot for a newbie like me.... thanks
Error [260]
Hello
I want to try to update my HD2 from 2.2 to 2.3.x but I always geht thr Connection error.
I´ve flashed my HD2 from Windows Mobile 6 to Android.
I thank you for your help.
I decided to change WM6.5 on my htc hd 2 phone, Flashed to 2.08 HSPL
and Radio to 2.15, Installed MAGLDR.
I wanted to install andriod rom image but using Dark Force installer, I have an error msg that is as follows can anybody help me.
SD Kernel open failed, appears in red colour, before eMAGLDR Menu
When Boot menu appears and I try and install andriod by Dark Force installer the following msg comes up.
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
I want to install andriod, but would be happy to revert to WM6.5 ,can anybody help. (it is wife's telephone and she is angry with me! you will save me)
Gary
It looks like you have to start all over from the beginning, try a youtube tutorial there are many out there and many of the more experienced techs on here actually post those videos. Good luck and make sure you follow it step by step. Also check out a thread by a moderator by the name of MSkip he posted on here directions on how to install a rom on your phone.. it's located in the HD2 section.
I think you've probably got everything right except for the actual ROM flash. There aren't too many Android NAND roms that you can flash the usual way (i.e the DAF like loaders you used for HSPL and magldr), but you can try flashing CWM and then a good NAND Android rom. Check out the Android NAND development forum for a suitable rom to flash, you'll most likely find the relevant instructions there. Or you can start over with YouTube tutorials to guide you (that's what I did). Best of luck.
Hi guys,
I wanted to return to the original W.M 6.5 in order to install new Android NAND, so I formatted my SD card, placed the image and loaded the bootloader. Unfortunately, the installation was interrupted. After that when trying to repeat the procedure bootloader says "Upgrade ROM code error Please try again" . I am trying again, but the same thing happens over and over again. I tried installing it via USB connection, but it installs 1% and gives the same error "000028002 NOT ALLOW".
Does that mean that I have bricked my phone and if not, how am I to fix that and install what I wanted to install?
Message says it all. ROM code error.
Fliashing from SD will remove HSPL so you have no CID bypass.
ROM you are flashing is not matching your devices country ID so you need to find a ROM that is correct to flash via SD or flash via USB & flash a suitable HSPL first.
Before proceeding flashing, check ROM & radios are correct for your device as too many people are bricking their devices by silly mistakes these days.
Thank you!
My phone is an Orange bought form UK. I fount the required ROM (ver. 3.14), but the same thing happens again. I tried to find the original 1.72, but it cannot be foung anywhere. Any ideas?
Flash HSPL via USB then ROM via USB
I managed to install the stock ROM, now I am going to pick a nice NAND Adnroid.
Thanks for the help, much appreciated!