hey all simple question I have a older bluetooth car interface that requires a bluetooth com port to interpret AT commands to the handset.
the problem I have is that I had a program i used on my last wm6 phone that worked great however on my HD2 I get a unable to create virtual comport error.
So I am hoping someone can make a suggestion.
Thanks,
yonu
I may have found my issue I went and tried VSPD Mobile on the HD2 and according to it there is a bluetooth serial port on Com2 this may be the problem does anyone know why there are 2 bluetooth serial ports on the HD2 and if the one on Com2 can be disabled?
Thanks,
yonu
Related
hi all
i have had a right time trying in vain to get my t mobile MDA compact to work with the holox BT-321 GPS receiver. the reason i am having so much trouble is when i pair the devices, a small window flashes up and says "This bluetooth device supports serial port profile, would you like to create a bluetooth serial port for it?" the window box is labelled "bluetooth serial port COM5" of course i click yes, it asks me for the name, and i leave it what its called "BTGPS74R" and click finish, this leaves me on the main menu. in the com ports tab there is "new outgoing port" and "new incoming port" i click outgoing and next and low and behold there is nothing in the box whatsoever to select. i have checked all the boxes in my bluetooth settings for the 2 com ports.
the phone refuses to show any ports at all, i have flashed the imate jam rom 1.12 as i read that solved it, but it never, i have tried a bluetooth program called pocket bluetooth tools and this brings with it more com ports but they do not actually work by putting the ports in the drop down list, its still empty !!! also when i select say port 6/7/8 the small window flashes up saying "this device supports......" and then the pocket tools dissappears and its all back to nothing again.
i am at my wits end with it and i dont have a clue how to get this bluetooth port to actually show up so i can bond with my bluetooth GPS and make tom tom 5 work
thank you anyone who can help me
Dan
Hi,
i just resolved exactly the same problem on my mda compact.
I had to do a complete reset of the device...
Hi
I am having a similar problem. I have an orange SPV M1000 and the same bluetooth GPS device. It is paired in bluetooth devices. When I got to connect on Tom Tom 5 it can't pich up the receiver. I have tried all the different wired/bluetooth etc device settings in TT as it says to try wired if bluetooth doesnt work. But to no avail. I'm tempted to try different sat nav software. Any ideas? Let me know if your issue gets resolved!
cheers
AJ
Hi guys,
The options for new outgoing/incoming port creation are to connect to a device with which you haven't paired. My gps creates a com5 too, like all of yours & TT5 finds it pretty fast when I have it to use 'another bt gps' @ com5.
When you think a hard-reset will solve your problem, get yourself a good backup first. Cause sometimes you can restore that backup & the problem is still solved.
BTW does your gps support nmea protocol? TT can only handle nmea & that could be the cause when your gps is setup for external communication with another protocol.
Good luck M
Thanks for the reply
Hi there
I've attached the info from my receiver, looks like it should be ok.
Tom Tom only has connections on infrared, BT on COM6, Serial Cable on COM1, COM9:, COM2:, and Serial on USB
When I go to Start>Settings>Bluetooth settings there are options for bluetooth serial settings. These are non changable and if you check the boxes it will set Inbound Com port to COM4 and Outbound COM port to COM5.
These com ports dont seem to be options in Tom Tom 5 which confuses me.
So i download a program called BeeLineGPS which does a scan of all the ports and baud rates which I thought would be easier than the manual setup of TT5.
Try the com port options mentioned earlier with the BeeLine software and it still cant pick up the GPS device. Tried fiddling around for ages and still not working.
Do I need some kind of software for forwarding the ports so TT5 can see the device.
The advert for the device i bought promised me and easy set-up but this is being a pain
http://cgi.ebay.co.uk/32-Channel-Bl...03433467QQihZ018QQcategoryZ4668QQcmdZViewItem
All Fixed now. I upgraded the Rom to a newer version. After this the tom tom picked up that it was actually on port 5 which it wasnt doing before. Bobs your uncle
Does anyone know whether or not the exec supports the Bluetooth Serial Port Protocol?
Anyone help me please, if you have a bluetooth GPS, in the bluetooth settings, is a service Serial Port? Im trying to see if its possible to connect one of those bluetooth serial cable things to it, but id like to know in advance of purchasing the bluetooth unit.
Hi Tim,
Yes the Universal supports Serial Port over bluetooth. That effectivly is how all BT GPS devices communicate with the software.
Gavin.
Dear Htc fellows,
My bluetooth GPS is working strange on my Universal, but on iPaq with
WM2003 works as a charm. The BT GPS is new Solar GPS with new Mediatek
chipset.
It's not working with iGo 2006 and even not Tomtom 5 or Tomtom 6.
I can find the BT GPS in BT manager, I can pair it, but I dont know why,
it needs a pass key even if it shouldn't. Then when I explore it's
services, The popup come again asking me if I will allow external BT
device to connect to my Universal and it come asking passkey again (Why?).
I can't even enter an empty passkey (bt device doesen't require it). After that I have successfully paired the device. I can add it's serial port to enumerate on com ports 8 or 4.
When I start Tomtom, it doesent detect the device at all. If I use iGo, it detects, gets datas and disappear, it's allways appeared for 1 second and then 5 seconds not. No matter Which bitrate I set (device is written to be 9600) it needs to be in NMEA protocol, not SIRF.
When I use some freeware GPS programs, it seams to be working ok, it shows satelites and it's not disappearing.
What can I do with that???
I have some idea that it's probably about WM5 and it's security....
How can I setup com security in registry? can I set the port speads manually atd... I had performed a hard reset and it still don't work. Can ROM update or AKU update help me?
Does anyone have some idea what should I try now?
O2 XDA EXEC:
Rom: 1.30.107
Radio:1.09.00
P:42.42.P8
BT GPS: model: BT 2.5MR
made by f-tech.com.tw
Thanks;
Shef
Could you find a solution??
Hi,
I have the same problem exactly and could not find anything on the net. Did you solve your problem?
well ...
i know that there is a problem with GPS and WM5 and so there is this patch which i install every time i hard reset .....
the guys i bought MY GPS from gave me this ... and they are pretty knowledgable .....
it works well ....
try it !
tried
My OS version is WM2003 but tried anyway.. Did not work.. can there be version for WM2003??
did you ?
did you define an outgoing com port for the device (com 4 for example ?)
com port definition
well, igo finds the device an COM 6 actually, it connects too.. but stays connected just for a second, then again and again..
I installed GPSGate and created a virtual com port 7. I manually configured the GPS receiver connection to COM 7 on igo.. But all the same.. :
do you advice another way?
one other thing the device works with navigon 5.0 and tomtom 6.0 smoothly, no problem.. only igo..
well...
IGO is CRAP ... that is well known .... lots of bugs ...
i am sorry .. i do not know how to solve your problem...
but i suggest using destinator 6 ..... (that's what i use) ....
simple ... nice looking .... big buttons and able to navigate to your contacts directly (especially useful if you have Phone Edition)
oh ... and ... works great !
I got the Holux GPSlim 236 GPS. I can pair the GPS with Universial. But I cannot set the com port at all. A pop up window always say the com port (I tried everyone of the ports) is not available.
Any one got a solution, does the GPS bug fix help ? and what does it fix ?
Might seem a bit obvious, but have you tried the code "0000" when pairing your device?
Once paired...did you define an outgoing serial port on "Bluetooth Settings" menu on your WinCE?
I have a royaltek bluetooth GPS and it's been working well with TomTom[5|6]...I use '0000' as passkey (default on many 'non-interactive' devices), once paired I clicked on 'COM Ports' tab and defined a new outgoing port, the wizard should list the GPS as an available device to create a COM port so I used it and I got a 'com0'.
Once the outgoing port was created I had to tell TomTom to use the new 'com0' and worked like a charm
It's been working since TomTom 5.21 (previous versions didn't work).
Hi all. I've used my Qtek with TOMTOM and a bluetooth GPS antenna for many time. Some days ago, the system don't run anymore.
The problem is in the Universal Bluetooth: I can find and add bluetooth devices but, when i use it, there is not communication. So, for example, i can connect my Universal with GPS antenna in the bluetooth section, but TOMTOM tell me that there isn't a GPS antenna. Also, i can link via bluetooth my Universal with the notebook, but i cannot start an Activesynk session via bluetooth: it tell me that no pcs are connected even if in the bluetooth list there is my pc and in the service list there is "activesynk" and it is activated.
Now, it is a software or an hardware problem? Any idea? I've anjlurned my software at the AKU 3.2 last italian ROM, but it didn't help.
Thanks in andvance for the help and sorry for my english.
Idum
UP
Pls help me. In what manner i can test if it is an hardware problem or only a software problem?
Idum
I have same problem ...
but still dont know the way how to fix
First
For TT to work with your bt gps you have to create a unsecured incoming port, take COM0 or any other number.
then it should already work in TT, if it not select in TT a GPS receiver and select com0
You have to create a com port for the BT connection and enable that com port in your AS on your pc.
To sync with AS over BT you have to select Connect with BT on your Device!!!
Hi guys, i installed tomtom 7 on my xda mini s and bought a HOLOX bluetooth gps reciever. I paired my xda and gps and ticked the serial port. It would not allow me to create a com port for this device (cant create a com port for any device) It shows COM6 and COM7 but i get the error ' the com port could not be created, please check your settings and try again'. When i open tomtom and try to find the gps on the serial port it doesnt work. The thing is, when i pair it connects to pair then disconnects and i dont know how to connect them again, this bluetooth stack is rubbish in my opinion and i cant find a replacement.
Any help/suggestions would be appreciated
Thanks
hooking the holux
I have a holux and same device.
the only thing you need to know is which virtual COM is the holux device using.
You will be giving this info when you pair the holux (bluetooth).
Fairly simple (at least in my case)
Resolved
Hi, thanks for your post.
I resolved this matter by installing the widcomm bt stack and changing certain registry settings.
It now connects when i switch the holux device on.
Thanks again people
GazzehGNET said:
Hi, thanks for your post.
I resolved this matter by installing the widcomm bt stack and changing certain registry settings.
It now connects when i switch the holux device on.
Thanks again people
Click to expand...
Click to collapse
Hi,
i'm tried to install the widcomm bt stack (v.1.7 test and BroadcomBluetoothStackX51V05).
In both times the volume of the wizard become much down and i't impossible to listen somethings.
The ringtone dont'worls and any file (avi or mp3) dont' listen.
have you fix??
What version have you installed??
Thx
Dansen
Solution for "The COM port could not be created. Please check your settings and try again" in http://yopablo.blogspot.es/