Database Users

NEW QTEK S110 - The initial problems I have found

Hi I recently got a S110 since using it (very basic usage) I have encountered some problems can anyone help?
1.When I plug the mains charger into the S110 and it begins to charge the backlight does not work when I try to turn it on it does turn on as I can see the today screen very dimmly I then have (struggle) to go to the settings/backlight and tick and untick the check boxes there to bring the backlight on. I have to do this every time the charger is plugged in and I want the backlight on.
2. My Phone does not switch off even when I hold in the power button for 2 seconds as the manual says.
3. I am unable to start a new message or create a new contact from the today screen it makes the noise but the application does not open
4. When somebody phones me they hear it ringing in their ear for 20 rings and it only rings so that I may hear it for 8 rings
5. I am unable to use transcriber when writing text messages I write on the screen it beeps as though it has been recognised but does not write the printed text to the screen.
Please can anyone help

Problems Q110
Just received mine this am, generally happy with it although I will look at the problems you listed. I have discovered that it can't be turned off as well as you!
Will post more when I have had a chance to experiment.
S

@Duncan.M
the 2 second power hold to turn off the phone is an error in the manual.
holding the power button actually switchs the backlight off/on. which could help with your backlight issue.
can you actually use contacts and messaging at all? can you use the HW buttons to open either function? from your problems it sounds abit like not all the default software was installed the first time you turned your pda on.. well except for the ringling issue, i havent heard of that problem before.
SpeedN

@SppedN
My first question would then be. If I want to how do I switch my phone off if it is not holding the top right hw button for two seconds?
In response to your questions after taking two minutes to rtfm a soft reset fixed my inability to create a new txt message or new contact from the today screen & the issue with the backlight not working whilst connected to mains power
HOWEVER THE SOFT RESET HAS NOT FIXED.....
Problem 4 & Problem 5. (please see original thread subject)
@HeronLen OR Anyone else who has the CD Ver.A 06.2005
I would like to try a hard reset to see if that fixes the problems that still exist with my S110 except MY CD player on my PC will not read the CD that came with the phone would you be able to make a copy of your CD and if you have broadband upload it to an FTP/WEB SITE for me or if not even post a copy to me.

Heelo Duncan! I don't understand problem 4.
Do you mean, that when you make a phone call, your device rings x times, but the person you call's device actually rings y times?

I'd try a Hard reset to fix problem 4... it could be telco related delay possibly i guess. you dont actually need to have your pda attached to your pc to perform a hard reset. all the default software for you pda is stored on your pda in the extended rom. so a hardreset wipes the memory and begins a clean install.
for problem 5 can draw in notes with the transcriber? eg even simple straight lines? if transciber doesnt recognise your handwriting it can take a long time or even not display your writing.
oh and to turn the phone off you tap the reception icon in the middle of the start bar and turn on flight mode.
SpeedN

@helterskelter
Hi no I mean the other way around. When somebody calls me the phone rings in their ear 20 times yet it is only audible to me for 8 rings, which means that a) I have to have voicemail turned off otherwise voicemail picks it up after I have heard it ring only twice or b) with voicemail turned off I have to hope that the person calling is persistent (wait for a lot of rings in their ear) for me to get to the phone and pick it up.
I think it is a telco problem as speedn suggests that combined with slow software of the phone function of the S110.
Any suggestions are still welcome - How does everybody elses phone react?
@speedn
Problem 4. I know that I do not need to have my pda connected to my pc to do a hard reset though I would like to make a backup of my appointments etc onto pc before I do the hard reset this I cannot do without having a sd card (which I do not) or connection to my pc
Problem 5. I can draw in notes using transcriber but as theyre supposed to they stay in my handwriting (I think thats supposed to happen) The problem is that transcriber does not convert my handwriting into typed text. I have configured transcriber start>settings>input and it still doesnt work. I have also gone into word with transcriber as my preffered input method clicked on the letter shapes button selected the way that i write my letters and numbers and it still doesnt work, I write on the screen example, A (UP STROKE, DOWN STROKE, ACROSS STROKE) S110 BEEPS but the letter A is not typed on the screen it is stiil displayed in my handwriting. I really need to try a hard reset.

you can set your divert no answer to 30 seconds via your telco or in the settings>phone call forwarding section. and you can download activesync 3.8 from microsoft website. you can also backup appointments and contacts etc using permanent save in settings>system or xbackup to storage..just the appointments and contacts, a whole backu wont fit.
SpeedN

@speedn
Thanks for the flight mode answer.
We must be insync ourselves I was just reading about permanent save in the user manual. Ill try that
I ve also decided Im gonna go over to my mums house and put the cd in her laptop/share her cd drive and usinq wifi copy the entire contents of the cd onto my hard drive and try the install from hdd.
Ill let you know the results
Thanks for your help

Q110
I am not sure how I can contribute further, it would be good to get a fix for the off thing. I am not sure if many airlines will be happy with 'its off but not really' argument! Having interesting problems configuring gprs, why do MS make it so hard!
S

Re: Q110
heronlen said:
I am not sure how I can contribute further, it would be good to get a fix for the off thing. I am not sure if many airlines will be happy with 'its off but not really' argument! Having interesting problems configuring gprs, why do MS make it so hard!
S
Click to expand...
Click to collapse
actually funny you should mention that, i was flying interstate here the other day, and i noticed a new comment from the flight stewards. it was about devices that use flight mode...please make sure flight mode is on.
flight mode switchs off all the gsm radio its the same as switching off your mobile phone. mind you there was also a major Imate Jam advertising campaign throughout the whole airport, 2 metre tall Jams everywhere.
Speedn

I decided to see if I had any of the problems you listed. It turns out I had #5. I opened a note, selected Transcriber and tried to write something. It beeped like it recognized it but no text showed up. I then did the following:
1) reselected Transcriber as my input method
2) Selected Letter Shape Selector (didn't change anything here)
3) tapped OK
4) Selected each of the menu options at the bottom (just to see what they were)
5) After opening and closing each one, it started working
It seems there may be a software bug in this version of transcriber that causes it to not work unless a certain variable is initialized (by going to each, or one specific menu item first). FWIW, it worked form me.

@roblyman
no that didnt work for me.

Please HELP

I have an 8125 Wizard with WM6 RC5.
The phone was working fine until about a week ago.
Now the smart keys do not work but randomly start working after I press the key on the left above the volume control...as if it activates them. The messaging and internet keys never work anymore.
On the keyboard. it works sometimes and sometimes it doesnt. When it does not all the keys work...a few letters do not respond.
When the phone screen is activated by pressing power button when phone is on "hibernating mode" the today screen opens...then after about 1 second the software configered to the Email softkey opens and then closes.
Can anyone help...I have reset the device using clear storage...would I need to Hard reset, will that help. I had battery status installed and it also overclocked to 247....could that be a reason. I have now removed battery status. PLS HELP

the problem is very similar to this:
http://forum.xda-developers.com/showthread.php?p=2018535

the problem is very similar to this:
http://forum.xda-developers.com/showthread.php?p=2018535
so pls does any1 have a solution

Two things:
First, remember this is a bulletin board. Sometimes it takes time for people to get around to reading your post. Sometimes, 50 people will read your post before someone will bother to answer, and even then, the answer may not be a solution to your particular problem.
Second, as you saw on the other threads, I recommend opening and cleaning your button contacts. People are constantly surprised by the need for this, but if you have anything resembling an active life, you probably need to do this about once every six months.

Stupid Problem with P3452

Hi all
first post and i got an interesting problem with my phone which i qualify as stupid. It all started when when my virtually keyborad started becoming unresponsive and when i tried to do a factory reset, i could not enter the 1234 number to start it. i left the phone for a while and then i could not get into the setting even . But i could receive calls but i could not call since i could not access any numbers on the dial pad( by pressing on the numbers of coruse but from dial log screen i could)
Anyway long story short while fiddling with the phone , i thought the lock feature was on that is why some of the touch functions was not totally responsive but to my sadness, i activated the lock and now the phone is stuck on the front page and i cannot access anything since i must press unlock at the far corner of the down screen but stupidly, while pressing on the unlock, since it is unresponsive, i cannot unlock the phone to get to the normal menu and so on.The only thing working is the square pad which tells me to press cancel then unlock to free the phone for normal use
By the way the lock feature is the one that blocks the phone so that you do not accidentally press on the touch screen and activate a program and not the lock thing operators put to limit your phone
I want to know if anyone can help me unlock the screen so that i can reset the phone or alternatively any other method via usb to reset my phone to factory settings. Any special buttons on the phone i can do to do that?
I tired leaving battery out for 24 hours but that did not work to unfreeze the touch buttons
Was thinking to reload the windows mobile completely via the micro card (which i read here) but i am not sure it will work or i fear it might brick my phone
Any suggestions will be welcome please.... thanks

Use myMobiler to control device from Pc through usb
Good luck
Ps: you'll probably have to change digitiser afterwards

Well tried the mobiler but the thing is that it asks the phone to allow the program to conenct and i cannot press yes on the touch screen since it is frozen or something so i am stuck again.

Very strange, it doesn't ask anything on my device...
Why don't you hard reset: press green and red buttons and while pressing, poke the stylus shortly in the reset hole then release the 2 buttons. It will ask something that you probably won't see, just press the action button and wait for it to restart.

Don't flash another on just yet - it may well cause issues as it sounds like your digitizer is broken. Don't hard reset either
Does it pick up anything at all? Have you tried tapping all over the place in that region to try and get a response, sometimes just under the screen also works. Do you use a screen protector? If not, try it with one, if yes, try it without, it may be interferring with it, or it may help the touch be picked up by the phone (Stupid, I know, but this is something I found to work before with my elfs, and omnias)
When it is locked, is activesync picking the phone up? You may be able to put the remote.exe into the windows folder (for myMobilier) and do it that way.
A digitizer costs about £6-£10. But due to the age of this device, as sad as it is, I would suggest trying a new phone out if funds allow for it.

ok so far i tried the hard reset (red button and green and pressed the on off button but nothing. When i press on off button alone it switches off but not hard reset. I did not know i had a reset hole at the bottom of the phone.I did that with red and green button but nothing. Only when i poke the hole alone it does a hard reset i think but when i switches back on it is still unresponsive and locked screen
I tried poking under screen protector nothing. Also i think screen is still responsive because when i tap on it, the screen lights brighter
I tired putting remote exe file on the phone( active sync is working and i can read files on the phone) but i have two remote files..which one to use ? the one that ends with 40 one or 50 .Also where to put it specifically..which folder.I tried my windows mobile based device but nothing.Also tried program files and data application nothing.
Mobiler cannot connect since from pc alone because it asks my phone permission
and i cannot tap yes to accept program.
so any more suggestions please

Hi
Maybe I wasn't clear enough, here's the exact procedure, it should work since you have to use only hardware buttons:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
If Hard reset doesn't work then your device hardware is faulty.

If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Avanisha. If you try to run one of the remote.exe it will say this is not a valid windows application, thats the one that needs to go into windows on your phone.

captainstu72 said:
If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Click to expand...
Click to collapse
Hi captainstu72, i was under the impression that he messed up something in his system so a hard reset would hopefully solve the problem. In case he still can't align the screen after HR then he has to replace the digitiser. Mymobiler will not solve anything, pls read the 1st post: he wanted to do a factory reset. He just have to sync before HR.

thks tito 12..problem was solved with your help.J ust did not get the steps of hard reset right. Phone is working ok now and screen is ok as well as tap function. thank god i don't need a digitizer. thanks to captainstu72 for the help as well .You were right tito..seems i ran a program and then all hell broke on my phone. I wanted to factory reset but as you know the pad was locked.

Glad I could help, enjoy your device

Ahh okay, guess i mis read something! Sorry
Glad its all sorted though, I was just concerned he may end up in an annoying align screen loop

Strange Touchscreen NAND Issues

ok, I have a strange issue that I can not seem to find the answer to. Whenever my phone locks after not being used etc. When I wake it up, the touchscreen will not let me unlock. It takes me close to 50 attempts to do so. However once I actually am successful in getting it unlocked. The touchscreen works flawlessly. I have tried several different builds, all of them I have the same issue. I have done Task29 and started fresh on that front each time. I tried a couple different radios. Any suggestions?

**** man i got the same problem! i tried hard reset, rom updates, other buils but it wont go away!
plz someone help us!

Hi,I'm using BOYPPC-SHIFTPDA GINGER 2.3.3 RAM_V5 works great so far the best that I tried.After u flash android it's recommended to wait few mins until it loads everything then do a shut down - not a restart.then again u wait few mins and u do a second shut down. after that the os should work fine ,at least for me works great. if that doesn't help ,try to reinstall everything from the start..hspl radio etc.

You could just turn off the lockscreen? Get 'NoLock' from the market. That should do the business if you want.

I've got the same problem since 5 days, It started when I started using WIFI and turning off my 3G ..

you have the same problem my hd2 has....it is a hardware issue. the screen becomes unresponsive. if you still have warranty send it in for a repair. if not... repair it yourself. it's not that hard. the screen wire is probably just loose.
follow this video to take apart your hd2.
http://www.youtube.com/watch?v=cL-jnUKufC4

Sounds like a similar problem that I'm experiencing. If I wake the lockscreen with the send key instead, it works. When I boot I get exactly one shot with the end key then it locks up again. I'm able to use it with the send key, but concerned it might get worse. If anyone finds the solution please post.

I actually for the first time had this, and I know this is going to get flamed but its not the Screen thats the problem. And I think (BIG IF) that the dreaded unresponsive screen issue that we keep reading about Majority of them I think is not the screen.
I have 2 HD2s and both have worked flawlessly without any problems, but today I was playing with my test phone that doesnt get used that much and I noticed after installing a new rom that my screen after I played with it for a bit went black (sleep) and when I woke it up it wouldnt respond, first thing that crossed my mind is I just lost my digitizier, and started wondering okay why, I went as far to re-flash WinMo stock HD2 rom, same issue, so I decided its time to find out exactly whats causing this, and I found it. I wasnt going to make a post again cause I figured people would be "Not another thread about this" but I know whats causing the screen issue, at least this is my suspicision and I have temporarily fixed mine.
The problem is HARDWARE, The Culprit: THE END KEY (Red Button)! The Answer to "How or Why": The "End" key is used to turn the phone on and off or to put it in sleep mode, it is the most used key out of all 5 keys, it is used probably 7x more then all the rest, Its used for just about everything, now how does this cause the unresponsive screen? Easy, the phone lock or sleep is associated with this key, Its the only way to make the screen go off other then waiting for the time out period. Because by habit we mostly hit the end key to turn the screen off the phone automatically associates this with locking the phone, once that happens the screen becomes unresponsive because of several reasons: 1) The contact under the actual key has dirt which causes the button to stick in the down position, 2) the contact is bent which the "end" key is pressing down on the contact which is making contact with the board and causing it to be unresponsive, 3) The contact is worn. This is the reason why if you press the end key a few times (anywhere between 2-10) and then try the screen responds, this is cause your "unsticking" the key which then lets the screen respond.
Most of us when we hit the end key press to the far right to avoid hitting the back key (The button with the left arrow) which causes the end button to lean toward the right. But you can wake the phone up with the other 4 keys to the lock screen which will allow you to unlock the phone. As a temporary fix for myself, on my test phone I now make sure to press on the left side of the key to prevent this from happening, since its a test phone I'm not worried, but the real solution is to take the phone apart and clean the underside of the end button, and the actual contact with alcohol to remove the build up of dirt and whatever else. And also if the contact frame is bent to GENTLY bend the right side back up alittle to stop it from happening, or sending it to htc and letting them fix it.
We have to RE-TRAIN ourselves to start using the other keys to wake the phone up and not rely on the end key so much.
Hope this helps anyone finally why we have this problem. And if it works for you then hit the Thanks button

Really Weird Problem with LG P700

Ok so my brother in law handed me his buddy's LG phone today saying that its acting weird and freezing a lot. I figured I would look at it and see if I could fix the problem and I have run into something that I have legitimately never seen on a phone before.
So I start the phone first and after swiping to unlock the phone ( there was no pass ) I find that instead of the phone loading the default launcher it loads a webpage that cannot be found ( either because the page does not exist or because its not connected to any network.)
Pressing the home button does nothing. I can access the notification center but at best I can maybe toggle a few things and achieve nothing. Hitting the settings key produces nothing.
So I figure.... well this is weird and try it again. Same thing.
After a few tries I figure. hey **** it lets wipe the phone in the recovery menu. So I pull the battery and then hold the power and volume down key to start the phone into recovery..... except the phone doesnt go into recovery and it just boots normally again and gives me the weird webpage thing again.
Has anyone every run into anything like this?
for the record the website the phone tries to load as its homepage is "orderprocessingengine.com/ huge string of letters and numbers here" Which the domain itself does not seemt o be attached to any website.
I am literally in awe. I have never seen this in my life.