Related
Just recently I detected that I do not receive any calendar notifications any more, which is really annoying. Device wakes up but no sound at all. Browsed some threads on this (http://forum.xda-developers.com/showthread.php?p=1035667#post1035667) but only advise I found is to hard reset - which I do not want. I checked the registry instead and found some questioning entrys.
Could anybody USING PHONEALARM (www.pocketmax.net) on a Prophet or any other WM5 device please post some of his registry entries here?
- HKCU\ControlPanel\Notifications\Reminders
- HKCU\ControlPanel\Notifications
Many thanks
Hase01
I have no problem with these software. Did you have the last version already?
cidriver said:
I have no problem with these software. Did you have the last version already?
Click to expand...
Click to collapse
Could you post you registry values then? Would be very helpful for me
Thanks
To me either pocket clock or PHONEALARM caused the same problem.
I went back to a sprite back-up point from before installing both applications. Then my reminders and alarms worked again.
I have not tried to reinstall either of them.
Robin
cidriver said:
I have no problem with these software. Did you have the last version already?
Click to expand...
Click to collapse
Could you help me posting your registry values please? Once I found a solution without hard resetting I will post it here, seems that many have this problem. And I feel it is connected to PhoneAlarm
hase01 said:
Could you help me posting your registry values please? Once I found a solution without hard resetting I will post it here, seems that many have this problem. And I feel it is connected to PhoneAlarm
Click to expand...
Click to collapse
The registry values?
I didn't manipulate the registry, I just put the user name and introduce the serial number.
cidriver said:
The registry values?
I didn't manipulate the registry, I just put the user name and introduce the serial number.
Click to expand...
Click to collapse
Yes I did the same. And after more than two months I ran into the mentioned problem. And now I want to manipulate the registry but need to compare the mentioned values with mine. There is nothing critical about registry values and your would pretty much help me providing your info.
hase01 said:
Could anybody USING PHONEALARM (www.pocketmax.net) on a Prophet or any other WM5 device please post some of his registry entries here?
- HKCU\ControlPanel\Notifications\Reminders
- HKCU\ControlPanel\Notifications
Click to expand...
Click to collapse
hase01 - here you go...
BTW, I had the exact same thing happen to me with my Magician, and had to hard-reset to get notifications back. I've only just been game enough to load pA on my newish Prophet and so far it is working OK. I am running pA Lite v.1.56.1 (Build 80).
PeterW said:
hase01 - here you go...
BTW, I had the exact same thing happen to me with my Magician, and had to hard-reset to get notifications back. I've only just been game enough to load pA on my newish Prophet and so far it is working OK. I am running pA Lite v.1.56.1 (Build 80).
Click to expand...
Click to collapse
PeterW,
many thanks. Unfortunatly it looks the same on my phrophet - but without getting notified. I am using pA 1.31 - no idea whether this will generate other registry entries than pA lite 1.56.1. On my my WM2003 device with pA 1.31 installed the registry looks different, in reminders I have:
* Default = "Erinnerungen"
* Duration = 10
* Options = 1073741855
* Wave = "Alarm4"
Anybody else having these entries in a WM5 registry?
Regards Hase01
hase01 said:
PeterW,
many thanks. Unfortunatly it looks the same on my phrophet - but without getting notified. I am using pA 1.31 - no idea whether this will generate other registry entries than pA lite 1.56.1. On my my WM2003 device with pA 1.31 installed the registry looks different, in reminders I have:
* Default = "Erinnerungen"
* Duration = 10
* Options = 1073741855
* Wave = "Alarm4"
Anybody else having these entries in a WM5 registry?
Regards Hase01
Click to expand...
Click to collapse
Have found a solution using alarmToday, also a pocketmax product. Look my post on their support page:
http://www.pocketmax.net/smf/index.php?topic=2637.0
No need for a hard reset!!!!! Hope this helps other users, for me phoneAlarm is one of the best tools I have on my PPC and to deinstall it would be of great disadvantage.
hase01 said:
Have found a solution using alarmToday, also a pocketmax product. Look my post on their support page:
http://www.pocketmax.net/smf/index.php?topic=2637.0
No need for a hard reset!!!!! Hope this helps other users, for me phoneAlarm is one of the best tools I have on my PPC and to deinstall it would be of great disadvantage.
Click to expand...
Click to collapse
I used Freeware Task Manager from http://forum.xda-developers.com/showthread.php?t=280104 to fix this. Run it, go to notifications tab, select "delete duplicate" and reboot. All working nicely now.
I've got my regional settings set for South Africa but the date format is in yy/mm/dd. I want to change this to dd/mm/yy. Is there any way of doing this in the registry and will it mess any applications such as Word, Excel, Outlook etc.?
Thanks.
Yes, look for Short Date Format
in http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
Thanks.
I see under my registry that the SSdte key is not there. Do I need to add it and if so how (I'm using Total Commander)?
I'm a bit of a noob at the registry thing
Well, I still cannot get this right. Anyone been able to do this.
Quad said:
Well, I still cannot get this right. Anyone been able to do this.
Click to expand...
Click to collapse
HKLM\nls\overrides
SSDte = dd/MM/yy
hang.tuah said:
HKLM\nls\overrides
SSDte = dd/MM/yy
Click to expand...
Click to collapse
Brilliant, it's working.
Many thanks.
I Used These Hacks Wen I Had My Dash Im Using It ON THe Shadow And I Have Great Results ps I Take No Responsibility For Any damage And I Did Not Make These I Found Them
1. HKLM\Comm\AsyncMac1\Parms\DisablePowerManagement
Change Dword value from 1 (default) to 0
2. HKLMComm\Irsir1\Parms\DisablePowerManagement
Change Dword value from 1 (default) to 0 i cant seem to find this on my dash or shadow
3. HKLM\Comm\PPTP1\Parms\DisablePowerManagement
Change Dword value from 1 (default) to 0
4. HKLM\Comm\L2TP1\Parms\DisablePowerManagement
Change Dword value from 1 (default) to 0
TIP 3
REGEDIT4
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Cl ass\SDMemory_Class]
"DisablePowerManagement" = dword : 00000000
Sir Charles!!
I applied these yesterday and I believ you have something....but I wonder if it's catchy. LOL
I left my connections on all night (BT/wifi), talked for 90 minutes to my friends and family, listened to music on pocket player for an hour and a half and now, 24 hours later I still have 50% battery.
I usually don't activate my connections until I use them and typically don't call too many people on this phone (I have a sucky corporate phone), but it seems all this added activity has not had anywhere near the impact I normally would expect.
I'll spread the word and see if more folks won't give this a try on their Shadows.
Meanwhile....Thanks!!
Np
Np Mr Scott
I took the liberty of creating a cab for these great registry hacks.
Note: I have excluded:
Code:
TIP 3
REGEDIT4
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Cl ass\SDMemory_Class]
"DisablePowerManagement" = dword : 00000000
What are the side effects??
tissle said:
What are the side effects??
Click to expand...
Click to collapse
So far I haven't found any, the fix is noticeable on saving battery life though.
Yes There Are No Side Effects And THanks 4 Making A Cab For Users Who Dont Wanna Mess With The Registry And Making It On Users Who DOnt Mind
Alright, I just did these edits with a fully charged battery and rebooted.
Let's see how long my phone lasts.
dilfatx said:
I took the liberty of creating a cab for these great registry hacks.
Note: I have excluded:
Code:
TIP 3
REGEDIT4
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Cl ass\SDMemory_Class]
"DisablePowerManagement" = dword : 00000000
Click to expand...
Click to collapse
Hi
Do you think this will work on my Universal?
Thanks in advance
orb3000 said:
Hi
Do you think this will work on my Universal?
Thanks in advance
Click to expand...
Click to collapse
I doubt it.. the universal runs on pocketpc and this cab was designed for smartphone windows os.
dilfatx said:
I doubt it.. the universal runs on pocketpc and this cab was designed for smartphone windows os.
Click to expand...
Click to collapse
Well I have installed already and testing, post results later
Thanks,
I downloaded the .cab and attempted to install. The install was unsuccessful- anyone know why that might be? Could my registry be locked? I am using WM6.1_V1b_by_Erofich.
So, no feedback yet ?
What kind of feedback are you looking for? I use it, I recommend it. This should be the first thing you install on your shadow.
Hmm ok, so does it work for diamond ?
Um, no... that's why it's posted in the Shadow/Juno forum and not the Diamond forum.
Actually, all of the registry keys are present in both the touchscreen and non-touchscreen editions of WM 6.1.
So the CAB installer may not work, but the actual registry fix should.
I am trying this on my Wizard and will edit later to post how it works out.
#edit to add#
Works great on both my Wizard and my Juno.
I think that these should work for any WM 6.x build.
Ok thank's, i will try these settings !
@tonyc0642 : You're really smart ! Didn't realize that i'm on Juno (Wm6.x) Forum...Really SMART !
Dr.Tenma said:
@tonyc0642 : You're really smart ! Didn't realize that i'm on Juno (Wm6.x) Forum...Really SMART !
Click to expand...
Click to collapse
I'm bored, soo...
tissle said:
What are the side effects??
Click to expand...
Click to collapse
I'm feeling bored, so i'll go in to what these keys do.
Basically all of these are power management keys, which allows the phone to turn devices/connections off when not in use.
If you want, you can take my word for it, otherwise you can use the links.
AsyncMac is The NDISWAN implementation in Windows Embedded CE
IrSIR = Infrared Serial Driver
PPTP and L2TP are VPN protocols.
Hello,
I've got a litte problem with every version of iGO8 on my Touch Pro 2.
The backlight is never on the maximum level.
I always use my phone with maximum backlight but when iGO8 run the backlight is only at 50% even if I set the slider in the options menu to the maximum. It's like iGO8 can't use the maximum backlight of the phone.
Anyone can help me?
Thanks a lot!
My experience is that backlight cannot be done by iGO8. I don't use this setting in the program, but am using Phone weaver to do this for me (volume, backlight, power - all changed when on AC power and no ActiveSync (=in car holder))
Use iGoLuncher to run the app. it solves the problem.
Bright.Light said:
My experience is that backlight cannot be done by iGO8. I don't use this setting in the program, but am using Phone weaver to do this for me (volume, backlight, power - all changed when on AC power and no ActiveSync (=in car holder))
Click to expand...
Click to collapse
I don't want to use another app just to solve a little iGO8 problem... But thanks for the tip.
Roberto79 said:
Use iGoLuncher to run the app. it solves the problem.
Click to expand...
Click to collapse
I'm sorry but I don't unsderstand what you mean by "Use iGoLuncher"
I made a new device in the data.zip; copied the file 'HTC Touch Pro T7272.ini' in config/devices and named it HTC Touch Pro 2.ini.
Now changed the line of maximum backlight to this:
backlight_max = 15
so the complete file is this:
Code:
info_names="HTC Touch Pro 2"
;Copied from HTC Touch Pro T7272
[gps]
port=4
baud=57600
[device]
SDCard_dsk_num=7
[rawdisplay]
highres=0
autoconfig=1
driver="gx"
screen_x=800
screen_y=480
[power]
backlight_manage_values=1
backlight_max = 15
backlight_min = 0
backlight_reverse = 0
backlight_key_bright_BA1 ="Brightness"
backlight_key_bright_AC1 ="ACBrightness"
backlight_key_timeout_BA = "BatteryTimeout"
backlight_key_timeout_AC = "ACTimeout"
backlight_key_ontap_BA = "BacklightOnTap"
backlight_key_ontap_AC = "ACBacklightOnTap"
backlight_key_on_BA = "OnOff"
backlight_key_on_AC = "ExtOnOff"
backlight_methods = 1 , 25
backlight_events = 1, 5, 7
backlight_slow_api=1
Now insert into sys.txt:
Code:
[device]
type="HTC Touch Pro 2"
Hope this helps!
no problems on mine.. nevertheless, thanks a lot bright.light your name is simply perfect for a topic like this!
Sebacestmoi_666 said:
I don't want to use another app just to solve a little iGO8 problem... But thanks for the tip.
I'm sorry but I don't unsderstand what you mean by "Use iGoLuncher"
Click to expand...
Click to collapse
Here is the solution for those who dont want to make all the changes
http://rapidshare.com/files/255519307/iGoLuncher.rar
Bright.Light I just want to say... Thank you, Thank you, Thank you, Thank you, Thank you.
Everything works like a charm on iGO8 now^^
I have just added the line backlight_max = 15 on my sys.txt and it's ok. I don't have created an new device, I delete the device folder everytime I download iGO8 to keep iGO8 the lightest as possible.
By the way, what is the purpose of ;
Code:
[device]
SDCard_dsk_num=7
Roberto79 said:
Here is the solution for those who dont want to make all the changes
http://rapidshare.com/files/255519307/iGoLuncher.rar
Click to expand...
Click to collapse
18 D/L only site i have postet this llink and not even one thank you for help...
You are all welcome
maybe I GO is not compatable with the HTC Pro2
Roberto79 said:
18 D/L only site i have postet this llink and not even one thank you for help...
You are all welcome
Click to expand...
Click to collapse
That's maybe because it's not needed? I don't know what it does, so won't download, but some others will try it and come to the conclusion it's not needed.
Sebacestmoi_666 said:
Bright.Light I just want to say... Thank you, Thank you, Thank you, Thank you, Thank you.
Everything works like a charm on iGO8 now^^
I have just added the line backlight_max = 15 on my sys.txt and it's ok. I don't have created an new device, I delete the device folder everytime I download iGO8 to keep iGO8 the lightest as possible.
Click to expand...
Click to collapse
Yes, you are right - this should do it. Everything in those config files is overruled by sys.txt (when it's in the sys.txt, that is)
how do i make a shortcut into my program list? when i right click and create shortcut and paste it into the program list it does not work. any sugestions?
Link
ischagoi2 said:
how do i make a shortcut into my program list? when i right click and create shortcut and paste it into the program list it does not work. any sugestions?
Click to expand...
Click to collapse
There are many ways to do this, but I just use Resco Explorer because it's the easiest for me. When you click and hold on an item, you get a menu that allows you to select Send To - Start Menu as Shortcut.
Thanks,
Nate
iGo
Mahmoud Moussa said:
maybe I GO is not compatable with the HTC Pro2
Click to expand...
Click to collapse
I don't know about other versions, but iGo 8.3.4.102680 works just fine on my Touch Pro2. No problems on any ROM build that I've thrown at it.
Thanks,
Nate
8.0 works fine on my TP2...no sys jack isht needed
On the subject of versions, my sys.txt power section only has 3 lines:
powermgm_state=0
backlight_day=100
Backlight_night=65
How does any of that relate to "max"?
v8.3.4.102680
see for yourself...ALL VALUES BELOW ARE DEFAULT VALUES !!!!
all in HKEY_LOCAL_MACHINE
SOFTWARE\OEM\VolumeLimit
EnableVolumeLimit 1
VolumeLimit 19
SOFTWARE\Microsoft\FMRadio\OEM
NotPresent 1
SOFTWARE\Microsoft\Settings\Lock
DisableNever 1
SOFTWARE\Microsoft\Settings\Volume
Key 2
Screen 2
Mute 7
Volume 3328624230
MaxSystemUIVolume 30
MaxInCallUIVolume 10
MaxdBAtten 45
MinInCallVolume 4369
SOFTWARE\Microsoft\SecurityManager
DeveloperUnlockState 1
nice...
m
Upadate the title only on 12-7-2015
Any way to change the H+ and 3G icons? I heard they are registry entries
AlvinPhilemon said:
Any way to change the H+ and 3G icons? I heard they are registry entries
Click to expand...
Click to collapse
we all keep searching my friend...
share the info if you found it !!!
m
megasounds said:
we all keep searching my friend...
share the info if you found it !!!
m
Click to expand...
Click to collapse
Mega, mind keeping this thread updated with entries as they are discovered? Most of them are not specific to the Samsung Ativ S, so it will be useful later down the road.
I think, I can post ALL registry from Ativ S. I extracted it from the ROM file.
megasounds said:
we all keep searching my friend...
share the info if you found it !!!
m
Click to expand...
Click to collapse
On WP7 they are in HKLM\Software\Microsoft\Connectivity\CellularUx\DataConnectionIcon\ and default values on my EU Omnia7:
1XEDGE E
1XEVDO DO
1XEVDV DV
1XHSDPA 3G+
1XRTT 1X
1XUMTS 3G
GPRS G
LTE 4G
NONE
WIMAX W
DO IT!!
How to add "Google" as a search provider in my Ativ S?
It don't have a option in: "internet explorer-->setting"
A quick suggestion: there's a similar thread from WP7 here: http://forum.xda-developers.com/showthread.php?t=907971
Not all of the same keys/values will be present, and some of them might not be writable at this time. However, it's a start. As an example, changing the search providers is in there.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"ProductName"="Windows (TM) Code Name \"Longhorn\" Preinstallation Environment"
Longhorn: Was the codename of Windows Vista...
atifarkas said:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"ProductName"="Windows (TM) Code Name \"Longhorn\" Preinstallation Environment"
Longhorn: Was the codename of Windows Vista...
Click to expand...
Click to collapse
Windows 7 and 8 are built/based from Vista. Version 6.x.xxxx is Longhorn. Windows 7 has build number 6.1.7600. Windows 8 has 6.2.9200 :silly:
Custom Alert Tones for WP8 Registry Tweak!
Registry Tweak to enable custom alert tones for your Interop-Unlocked device!
Step 1: Make sure your intended alert tone is in your ringtones folder and your phone is unplugged from your computer (can be charging on wall charger but not plugged in to PC)
Step 2: Go to your registry editor and enter this value:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\EventSounds\Sounds\{Intended Alert Tone}]
Replace {Intended Alert Tone} with any of these values:
Code:
Achievement
Alarm
BatteryCharging
BusyCDMA
BusyTone
CallDrop
CallWaiting
Camera
CellBroadcast
Clock
CMAS
Congestion
CopyPaste
DownloadComplete
Dtmf#
Dtmf*
Dtmf0
Dtmf1
Dtmf2
Dtmf3
Dtmf4
Dtmf5
Dtmf6
Dtmf7
Dtmf8
Dtmf9
E-mail
FindPhone
IM
ImeAddToDictionary
ImeSelectCandidate
InCallBuzz
InCallDtmf#
InCallDtmf*
InCallDtmf0
InCallDtmf1
InCallDtmf2
InCallDtmf3
InCallDtmf4
InCallDtmf5
InCallDtmf6
InCallDtmf7
InCallDtmf8
InCallDtmf9
InCallVoiceText
Infbeg
Infend
InfInt
Interrupt
Keypress
KnownCallerRing0
LoudestInCallVolume
Lowbattery
Netbegin
Netend
NetInt
NetworkDrop
NfcInRange
NfcPaymentFail
NfcPaymentSuccess
NfcTransactionComplete
NfcTransactionCompleteShort
Notification
NotificationToast
Password
PhoneLocked
PhoneUnlocked
PhotoScroll
PingRing
Pip
Reminder
Reorder
Ringback
Ringout
RingPreview
RingTone
RingVoiceText
Shutdown
SMS
SMSNudge
StartButton
SystemAsterisk
SystemDefault
SystemExclamation
SystemHand
SystemQuestion
SystemStart
Toolkit
TransferComplete
VoiceMail
VoicePrivacyDrop
Warning
Step 3: Key should be set to "Sound".
Step 4: Change the value of the files location to C:\Data\Users\Public\Ringtones\YourRingtoneName.mp3
Example:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\EventSounds\Sounds\SMS]
"Sound"="C:\Data\Users\Public\Ringtones\AppleSucks.mp3
That would set a ringtone named "AppleSucks" in your Ringtone folder as your SMS tone.
Regards,
Hit the thanks button if you thought this was helpful!
nothing there for shutter sound I know where the file is, but currently I cannot delete it, It would be much easier to remove the reg key, or alter it.
simmos said:
nothing there for shutter sound I know where the file is, but currently I cannot delete it, It would be much easier to remove the reg key, or alter it.
Click to expand...
Click to collapse
The WP7 registry tweaks might be useful http://forum.xda-developers.com/showthread.php?p=10491327 (There's also disable shutter tweak, but not sure if it'll work on WP8)
jessenic said:
The WP7 registry tweaks might be useful http://forum.xda-developers.com/showthread.php?p=10491327 (There's also disable shutter tweak, but not sure if it'll work on WP8)
Click to expand...
Click to collapse
Ahh, thanks for that. Looks like the reg location is completely different. I will continue to look into it, perhaps there is a key to enable the option for disabling the sound (mine is locked by my rom) in which case I would need to match mine against someone else, otherwise a search function searching for keys (shutter.wav) may be useful.
simmos said:
Ahh, thanks for that. Looks like the reg location is completely different. I will continue to look into it, perhaps there is a key to enable the option for disabling the sound (mine is locked by my rom) in which case I would need to match mine against someone else, otherwise a search function searching for keys (shutter.wav) may be useful.
Click to expand...
Click to collapse
What is "Default CSC" of you ROM?
-W_O_L_F- said:
What is "Default CSC" of you ROM?
Click to expand...
Click to collapse
Sorry, may be a bit noob. Quick way to check this?
simmos said:
Sorry, may be a bit noob. Quick way to check this?
Click to expand...
Click to collapse
Type *#1234# in Diagnosis.
-W_O_L_F- said:
Type *#1234# in Diagnosis.
Click to expand...
Click to collapse
Thanks, default CSC IS I8750OXXAMD1
simmos said:
Thanks, default CSC IS I8750OXXAMD1
Click to expand...
Click to collapse
You need next field, with 3 letters. Ex. SER or ITV.