Related
So, finaly here it is...
Release Notes:
------------------------------------------------------------------------------------
DarkForces Team HardSPL by bepe and Cotulla
Please read carefully before installing!
1) To install this HSPL there must be SPL 1.42.0000 on your device.
Otherwise the installation will fail!
To check your SPL version, hold the Volume Down button and do a reset.
It is possible to downgrade to this SPL, by just flashing to an Official ROM
with this SPL version.
2) Features
- Disabled CID Check, so you can flash any official ROM without using a Gold Card.
- Security Level = 0, so you can use all the boot loader commands (for developers).
- This HSPL will not get overwritten when flashing a full NBH with SPL via RUU.
- No NBH signatures check, so you can flash unsigned ROM images.
3) Warranty Issues
Be warned, Installing HSPL may void your warranty.
If you need to send your device to a Repair Centre,
make sure that you uninstall HSPL!
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
5) Disclaimer
This product is free to use, but at your own risk. We take no
responsibility for any conflict, fault, or damage caused by
this unlocking procedure. No warranties of any kind are given.
We have tested our product on several devices and have not
found any problems with it.
DFT, bepe and Cotulla 2010.
[SIZE=5][COLOR=Red][B]MOD EDIT: Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03.
You need HSPL2.08 to run Android / WP7 / MAGLDR.[/B][/COLOR][/SIZE]
Thanks to:
Monkey, Laurentius26 and friends, Xmoo, tom_codon and Dutty for testing and support
------------------------------------------------------------------------------------
Troubleshooting:
I have SPL 1.42.666 on the device.... !!!! WAIT !!!! SPL 1.42.6666 is not the version of the SPL on your device!... it is the SSPL version. Most likely you have the needed 1.42.0000 SPL on the device, just try to install this HSPL if you need it. Don't worry, if there is not the right SPL on the device, then u will get an error message, but nothing will happen to your device
"Your OS ROM isn't customized for your hardware. Please reflash the proper ROM code or contact the service center", !!! Problem NOT related to HSPL !!! ... this means that you flashed a region protected rom... flash any other rom that has your region ID... or patch it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
22/03/2010
well, HSPL2 comes
To install/uninstall this HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000 SPL 1.42.HSPL
SPL 1.62.0000
SPL 1.66.0000 SPL 1.66.HSPL
SPL 2.07.0000
SPL 2.08.0000 SPL 2.08.HSPL
Other versions are not supported. (They are rare however...)
Now you can uninstall HSPL via same program, you no longer need to flash rom from SD card!
In HSPL2 you can select which version of SPL you want to install in the device.
There included 6 SPLs:
OSPL 1.42, OSPL 1.66, OSPL 2.08 (Original SPL)
HSPL 1.42, HSPL 1.66, HSPL 2.08 (Hard SPL)
Remember that some ROMs have old SPLs, for example 2.10 ROM have 2.08 SPL, 1.72 ROM have 1.66 SPL and etc!
You can install any of them using HSPL2.
Disclaimer
This product is free to use, but at your own risk. We take no
responsibility for any conflict, fault, or damage caused by
this unlocking procedure. No warranties of any kind are given.
We have tested our product on several devices and have not
found any problems with it.
1024LEOs (from T-Mobile with 1024ROM) ARE NOT SUPPORTED
DFT: bepe and Cotulla 2010.
Thanks everyone for testing and support!
[HSPL3] HowTo flash everything ;)
Cotulla: HSPL3 available
See original post here...http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
so what about changes?
*Support 2.10 OSPL (in 2.13 ROM)
*Now included only 2.08.0000 and 2.08.HSPL.
Seems all ROMs based on 1.42, 1.66, 1.XX can work with 2.08 SPL without problems.*
*Now one HSPL for different LEO types: UsualLEO, TelstraLEO and 1024LEO*
*Because there no SPLs except 2.08, so no risk to brick 1024LEO with wrong version.
*Telstra LEO supported. Actually Model ID checked by first 4 letters.
21.06.2010.
-Cotulla
HSPL4... available!
Thanks to Cotulla
HSPL4 available
OSPL - Original SPL (Official)
HSPL - Hard SPL
*Includes 2.08 OSPL, 2.08 HSPL, 3.03 OSPL, 3.03 HSPL.
You can install any of this.
*To install any SPL there must be any SPL version from this list on your device:
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
Otherwise the installation will fail!
3.03 SPL supports LEO1024.
This HSPL released for WM65 users, to provide better compatible with ROMs based on Official 3.XX ROM.
Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03.
You need HSPL2.08 to run Android / WP7 / MAGLDR.
to moderators: please add copy of this message to start of this thread.
20.02.2011.
-DFT team
HSPL 4
HSPL4 available
OSPL - Original SPL (Official)
HSPL - Hard SPL
*Includes 2.08 OSPL, 2.08 HSPL, 3.03 OSPL, 3.03 HSPL.
You can install any of this.
*To install any SPL there must be any SPL version from this list on your device:
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
Otherwise the installation will fail!
3.03 SPL supports LEO1024.
This HSPL released for WM65 users, to provide better compatible with ROMs based on Official 3.XX ROM.
Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03.
You need HSPL2.08 to run Android / WP7 / MAGLDR.
http://www.darkforcesteam.com.cn/forum.php?mod=viewthread&tid=29086&extra=page=1
20.02.2011.
-DFT team
Thank u very very much Bepe, u r the man. Downloaded and going to try in shaa Allah
Thanx again
Thank you very much Bepe and Cotulla.
One word, awsom.
Confirmed working.
WOW !
Finally. Borther (or Sister), you deserve a chunky donation ! So you bit cmonex eh?
Nice release! You are the best!
any chance of a spl 200 version?
Anybody up for a quick how to guide on how to use this tool?
fards said:
any chance of a spl 200 version?
Click to expand...
Click to collapse
Hahaha, same thing I would ask.
But let's first enjoy 1.42
pspbirte said:
Anybody up for a quick how to guide on how to use this tool?
Click to expand...
Click to collapse
Download
Unzip
Sync ur phone
Run HSPL
Follow the instructions
Have fun
installed thank s for your great work
wow great work bepe and cotulla...
Confirmed working
perfect work. you are great. thx very much
little words, many facts
Translate in ITA:
Poche parole,molti fatti
Thank's bepe
Wow
Talk about a smooth install.
The easiest and best looking HSPL I've ever used.
Thanks guys.
Great! but my SPL is 1.42.666
Who can share what's stock rom have SPL 1.42.000?
Tks!
bepe said:
Troubleshooting:
"Your OS ROM isn't customized for your hardware. Please reflash the proper ROM code or contact the service center", !!! Problem NOT related to HSPL !!! ... this means that you flashed a region protected rom... flash any other rom that has your region ID... or patch it
Click to expand...
Click to collapse
So, I cannot use this HSPL to flash official rom not released for my region. Can I use Gold Card or SSPL to flash different region ROM in presence of HSPL installed?
thx a lot guys.
You can install whatever ROM you want on your device with this HardSPL.
Anyway....
Good job bepe and cotulla!
Hey guys ! i have tried to Install the ROM and when it install the program stop and now i stuck in the bootloader i can't go into my mobile anymore how and it said not allow 00028002 plss help me guys !
Have you installed HSPL? Which spl version is showing in bootloader?Which rom are you trying to install and which method of installing are you trying?
You need to provide more info if anyone is going to be able to help you. All is not lost, the fact that you are still in bootloader means this can be recovered.
I installed HSPL and SPL-1.42.0000 and i tried to install English ROM cause i bought it from my friend and language is Russian :| and i want change it into english !
can u even get into the 3 color screen by using VolDown button?
Maxnguyen said:
I installed 2 HSPL and i tried to install English ROM cause i bought it from my friend and language is Russian :| and i want change it into english !
Click to expand...
Click to collapse
As i asked earlier, what spl version is showing in bootloader? Many people think they have installed hspl2 but they have in fact not done it properly, hence my question.
There are also many many different english roms, so of these, which one are you trying? Again please provide the details otherwise you make it almost impossible for anyone to help you without guessing.
Edit: Ok I see from your earlier reply (which you have since edited) that you have spl 1.42.0000 - that is not hspl that is a stock spl and that's probably why the rom does not install. You need to use 1.42.hspl.
hOW TO INSTALL THE hspl ???
bountygiver said:
can u even get into the 3 color screen by using voldown button?
Click to expand...
Click to collapse
yes i can ! And now i stuck in that i can't even go into my mobile !
ClydeB1 said:
As i asked earlier, what spl version is showing in bootloader? Many people think they have installed hspl2 but they have in fact not done it properly, hence my question.
There are also many many different english roms, so of these, which one are you trying? Again please provide the details otherwise you make it almost impossible for anyone to help you without guessing.
Edit: Ok I see from your earlier reply (which you have since edited) that you have spl 1.42.0000 - that is not hspl that is a stock spl and that's probably why the rom does not install. You need to use 1.42.hspl.
Click to expand...
Click to collapse
It's a English Europe ROM and now i even can't connect my phone to computer because i stuck in the Bootloader with tri colour
Here is the problem :
1/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
2/
[/IMG]
3/AND I STUCK HERE I EVEN DUN NEED TO PRESS VOLUME DOWN BUTTON !
[/IMG]
4/ I FOUND OUT SOMETHING NEW WHEN I RESTART THE PHONE I PRESS THE VOLUME DOWN BUTTON AND I GOT THIS !
[/IMG]
when phone is in three color screen
1 - connect to usb
2 - run hspl2
3 - choose your hspl
DO NOT choose one that ends .0000
DO choose one that ends.hspl
4 - when phone restarts, go into bootloader (three coloured screen) make sure that next to spl it says x.xx.hspl and NOT x.xx.0000
5 - with phone in bootloader, connect again USB
6 - flash your rom.
7 - if the rom requires a different radio, flash teh radio, just like the rom.
samsamuel said:
when phone is in three color screen
1 - connect to usb
2 - run hspl2
3 - choose your hspl
DO NOT choose one that ends .0000
DO choose one that ends.hspl
4 - when phone restarts, go into bootloader (three coloured screen) make sure that next to spl it says x.xx.hspl and NOT x.xx.0000
5 - with phone in bootloader, connect again USB
6 - flash your rom.
7 - if the rom requires a different radio, flash teh radio, just like the rom.
Click to expand...
Click to collapse
i DID LIKE WHAT YOU SAY IT'S WORK BUT WHEN IT'S INSTALL MAYBE 10% AND THE SCREEN BECAME DARK AND IT RETURN TO THE OLD SPL-1.42.0000 :| I WAS CHOOSE 2.08.HSPL AND THEN I GOT spl-2.08.HSPL 8G XE BUT WHEN THE SCREEN BECAME DARK IT'S BACK TO SPL-1.42.0000
sounds like you are flashing a stock rom from sd card, , the first thing that happes is the hspl gets overwritten by the stock 1.42.0000 and so teh rest of the flash fails.... use USB not SD
If you 'think' you already are using USB, then you have left leoimg.nbh on your sd card, , , get rid of it.
Maxnguyen said:
i DID LIKE WHAT YOU SAY IT'S WORK BUT WHEN IT'S INSTALL MAYBE 10% AND THE SCREEN BECAME DARK AND IT RETURN TO THE OLD SPL-1.42.0000 :| I WAS CHOOSE 2.08.HSPL AND THEN I GOT spl-2.08.HSPL 8G XE BUT WHEN THE SCREEN BECAME DARK IT'S BACK TO SPL-1.42.0000
Click to expand...
Click to collapse
Hi
1. When it is on Bootloader connect usb
2. Run HSPL2
3. Select 1.42 hspl
4. When HSPL successful you will see on the bootloader spl name is changed
Then
5. Download a rom and the Latest radio from this forum
6. Get bootloader and flash the radio first
7. then flash the rom
DO NOT FLASH THE STOCK ROM FROM A CARD
It will change the spl
Good luck
samsamuel said:
sounds like you are flashing a stock rom from sd card, , the first thing that happes is the hspl gets overwritten by the stock 1.42.0000 and so teh rest of the flash fails.... use USB not SD
If you 'think' you already are using USB, then you have left leoimg.nbh on your sd card, , , get rid of it.
Click to expand...
Click to collapse
u mean delete the LEOIMG.bnh in SD card and take it off so how can i flash without put it into SD card ??
You don't even need HSPL on your phone if you are flashing stock rom... Just download the official english rom and click on it when your phone is in bootloader mode and reads "USB" down bottom, then it will flash to your phone.
I don't even use HSPL when flashing custom roms... I use SSPL.
Maxnguyen said:
u mean delete the LEOIMG.bnh in SD card and take it off so how can i flash without put it into SD card ??
Click to expand...
Click to collapse
Flash over USB
Into bootloader, plug in usb cable, , when the word 'serial' becomes 'usb' on the phone, run your rom update.
Thax u ! ^^~ finnaly i did it ! thax u a lotttttttttttttttttttt
http://forum.xda-developers.com/showthread.php?t=631537
read this thread.. have your all required answers..
Hi i got a HD2 but it wont start
I tryed difrent accu from a college and his device just start and mine not
Any help ?
Greatings
Marcel
EDIT: I got the device starting up in the color bars(bootloader) But i cant flash it
HD2 wont flash
Hi my previous post that the device wont turn on i closed that one.
I am at the tree color screen but when i want to flash a radio or os then it hangs at 0% also i cant hardspl the device.
I cant use the device at this moment
applied hspl?
must be purely coincidental, and something completely different, but my HD won't start up since this mornming either...
Question: Do you get an orange led while charging? If so, my connector is probably broken...
Any chance you could tell us what ROM you had previously and what you were trying to do. What are the details you see in BootLoader Mode?
Dont know
I dont know, I got the device from some one else hspl i cant install it or the application is crashing,
I applyd the offical rom from htc but it hangs at 9% and ad 7/99%
I realy get frustrated by this
Antonius123 said:
I dont know, I got the device from some one else hspl i cant install it or the application is crashing,
I applyd the offical rom from htc but it hangs at 9% and ad 7/99%
I realy get frustrated by this
Click to expand...
Click to collapse
So the chances are that the phone is without a ROM.
Now can you try and get into BootLoader Mode (with phone off, press and hold the Volume Down button then tap the Power button). Then tell us what it says.
I got in the bootloader:
PB81100 HX-BC
SPL-1.42.0000
MicroP(LED) 0x05
MicroP(Touch) 0x50
Upgrade Rom code error
Please try again
in the tob right corner: RUUNBH
ruunbh means it is in flash mode, 1.42.0000 means it is stock spl,
so
get hspl2,
put phone into bootloader,
connect phone to usb,
when 'serial' becomes 'usb' run hspl2,
when it reboots after 'we hacked it', hold vol down so tat you return to bootloader,
spl should now say 1.42.hspl
(or x.xx.hspl depends if you changed it in hspl2 dropdown, doesnt matter if you did or not, so long as it ends .hspl)
run your rom flash over usb. either stock rom.exe or customruu with cooked rom.
i did that and the hspl2 application hangs (i will post the error code in this )
Error code after running hspl2_RUN
critical error
Flow: 00000006
Error Code:00000000
Discription: Unkown
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dit is de error that i get
i guess your last chance is installing the rom via sd card.
do you know if it was branded?
you can check that by trying to download a rom with the S/N of your phone at htc.com.
the rom you can download, is the right one.
download it, unpack it, copy the .nbh on the sd card, rename it to leoimg.nbh and get your phone into bootloader.
DN41
trying it now,
got serial into htc and now downloading and deploying the file
isnt working
I dont know why but the device go into the color bars again and dont continiu i use a 4 gb sd card
does it start flashing? when does it stop (%)?
any infos shown?
DN41
First i get loading for like 5 minutes then it gos to the bootloader directly
could be the card, that happens on 8gb cards too, loading.... wait wait wait - bootloader.
2gb fat32 4096 (4k) block size for best results.
ok i am a little bit further
i download the hp format tool (i use them to create my own os disks etc)
I formatted the sd card with 4k fat32 and now it is updating so thubs crossd.
Hi update did complete,
It now hangs on the HTC Logo on boot :S (i think it is not my lucky day )
or is it taking first time very very long ?
after i try to flash my phone to android ROM via SD card, i think i've brick my HD2
i think i can go to the bootloader( the screen with blue,red,n green colour)
n i can connect to USB (as i see at the bootloader screen with the USB word at the bottom when i connect to my laptop)
after i switch on my phone, it appear this words
"The device is unable to boot because either you have turned off the device incorrectly or......." (as the picture i link)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so, is there anyway to solve this problem?
Press Volume Up to hard reset?
tried dy
also i try to use sspl to flash, but it stuck at 0%
some more info please:
1) how did you try to flash an Android ROM via sd card? Do you have magldr flashed?
2) Do you have HSPL flashed on the device?
Flashing an Android ROM from SD isn't possible from anything but magldr or CWM, so which one did you use?
orangekid said:
some more info please:
1) how did you try to flash an Android ROM via sd card? Do you have magldr flashed?
2) Do you have HSPL flashed on the device?
Flashing an Android ROM from SD isn't possible from anything but magldr or CWM, so which one did you use?
Click to expand...
Click to collapse
1. via SD Card, i click on CLRCAD inside the Android folder
2. my bootloader now showing SPL3.03
kelvinklose said:
1. via SD Card, i click on CLRCAD inside the Android folder
2. my bootloader now showing SPL3.03
Click to expand...
Click to collapse
Android does not work well with that SPL version.
Download HSPL4
tell it to flash SPL 2.08
Try launching clcrd and haret again.
i found this guys,http://forum.xda-developers.com/showthread.php?t=668347
now, stuck at step 14, which i cant enter any words in the M-TTY windows
orangekid said:
Android does not work well with that SPL version.
Download HSPL4
tell it to flash SPL 2.08
Try launching clcrd and haret again.
Click to expand...
Click to collapse
i dont have HSPL 4.
only get to update it to HSPL3.03
after update to HSPL3
my phone still hang at the HTC logo page,
after a while, it still show
"the device is unable to boot because either you have turned off........."
(same as the above pic)
i use SSPL to flash it to other ROM, hope it works
50% now
oh,, FINALLLY, i manage to flash back to my original ROM
thanks all the helping guys
kelvinklose said:
oh,, FINALLLY, i manage to flash back to my original ROM
thanks all the helping guys
Click to expand...
Click to collapse
lol, np.
for future reference:
http://forum.xda-developers.com/showpost.php?p=11499585&postcount=3
This is HSPL 4, it allows you to flash to different HSPL/SPL versions:
For flashing Android/WP7 or running Android I'd suggest using that to flash to HSPL 2.08
orangekid said:
lol, np.
for future reference:
http://forum.xda-developers.com/showpost.php?p=11499585&postcount=3
This is HSPL 4, it allows you to flash to different HSPL/SPL versions:
For flashing Android/WP7 or running Android I'd suggest using that to flash to HSPL 2.08
Click to expand...
Click to collapse
but i dont see HSPL 4 in the option
i only see
2.08
HSPL 2.08
3.03
HSPL 3.03
kelvinklose said:
but i dont see HSPL 4 in the option
i only see
2.08
HSPL 2.08
3.03
HSPL 3.03
Click to expand...
Click to collapse
What Orangekid means it is the fourth released HSPL which is called HSPL 4. You just have to coose which HSPL or SPL version you want to use. If you if you are wanting to put SPL back onto your HD2 then just make sure you flash a version with .0000 at the end.
HTC HD2 vodafone germany.
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA FAIL
- hard reset - failed
- flash a stock ITA rom via activesync USB - failed
- flash a stock ITA rom via bootloader USB - failed
- flash a stock ITA rom via SD - failed
- flash a stock ITA rom via SSPL - failed
- flash a stock ITA rom via goldcard - failed
- download different stock rom - failed
- connect using MTTY drivers - failed
- change PC and USB port - failed
- use a different OS (Windows XP Mode under Seven) - failed
- disabled UAC, firewall and antivirus - failed
- use a different SD car (fat32 formatted) - failed
- today i downloaded stock rom from original web site tried it failed
*** UPDATE ***
You say its voda Germany, yet you are flashing Italian roms?
Radio fail is one of the more dreaded things to read. Your only hope is getting one of the CORRECT (I.e voda Germany) roms to flash. Find all the voda de roms you can find,(probably 1.43, 1.72 and 3.14) and try flash each from SD card. There's a good chance none will take, but there have been a handful of cases where it suddenly springs to life.
Also worth using the freezer trick.(cards and battery out, rom ready to flash on SD, chill phone for half hour in sealed bag in freezer, when ready put in SD and battery and try to flash.)
I tried this rom -HTC HD2-RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
with usb It stock at %8.
I tried with sd card It stocked again.
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
This rom is also not working.
I asked for help from htc stuff they asked my imei.I told them my imei number.They checked and they said 'My mobile phone was bought from HTC vodafone germany.
I downloaded the latest htc hd2 germany vodafone stock rom.I made hspl 2.08.Hslp is okey.I connected with usb.It stoped at %8 again.
I have tried everything.Is it a hardware error or software error.I will try to put the mobile phone in to the fridge for 30 minutes now.
I tried to load radio rom It stucked at %96.
I tried to clean phones memory with task 29 before I flash a new rom.
Task 29 stucked at %96.
Do you have any suggestion for me?
Teacher50 said:
I tried this rom -HTC HD2-RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
with usb It stock at %8.
I tried with sd card It stocked again.
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
This rom is also not working.
I asked for help from htc stuff they asked my imei.I told them my imei number.They checked and they said 'My mobile phone was bought from HTC vodafone germany.
I downloaded the latest htc hd2 germany vodafone stock rom.I made hspl 2.08.Hslp is okey.I connected with usb.It stoped at %8 again.
Click to expand...
Click to collapse
don't use 2.x, they are tmous spls and will interfere with flashing. Use hspl2 to set 1.66.0000,
I have tried everything.Is it a hardware error or software error.I will try to put the mobile phone in to the fridge for 30 minutes now.
I tried to load radio rom It stucked at %96.
I tried to clean phones memory with task 29 before I flash a new rom.
Task 29 stucked at %96.
Do you have any suggestion for me?
Click to expand...
Click to collapse
Forget about task29 it doesn't touch spl or radio.
Its likely a corrupted radio, but unfortunately there's no way to drop the radio, so its preventing flashing.
Go to spl 1.66.0000 and try the voda de roms from SD again.
Photos
I will add some photograps but I can not add because this web site says You should post at least 8 posts.
I search on internet to find HSPL2 to set 1.66.000 but I can not find.I am still searching for it.I will try to set my hspl to 1.66.000 now if I find hspl2 program
theres a link in my sig where it says HSPL2|HSPL3|HSPL4, or if you put hspl2 into google the hspl thread is the first hit, titled [HSPL/HSPL2] HowTo flash everything - xda-developers
I downloaded HSPL2.And I adjusted my hspl to 1.66.000.I checked my bootloader.It is okey.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What will I do now?
Try to load vodafone germany rom with sd card?
Which method should I try now?Trying to load rom with usb or with sd card.Which one is better?I don't do anything only I adjusted my spl to1.66.000 as in the picture.I took the picture 2 minutes ago.
Any suggestion ?
I used hspl2 to set my hspl 2.08 to spl 1.66.000.It is okay now.I checked from bootlooder.
It is like this now.
What should I do?
Which one is better? Should I put the mobile in the fridge to cool or trying to install stock german vodafone rom with sd or with usb?
well, you may as well give usb a go first, you arent gonna hurt anything.
Which one is faster loading stock rom from usb or sd card?
I downloaded this rom: RUU_Leo_S_Vodafone_DE_3.14.162.5_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
I will install rom now.Am I right?
lol, in your position it doesnt matter, just getting something flashed is all you need worry about. They're about the same, 3 - 5 minutes or so. Usb is a hint faster overall, id say,
Oh my god.Please wish me luck.I am trying stock rom from usb now I hope it works
My computer is windows 7.I will run the program as administrator.Is it true
That is my last question.Then I will load stock rom from usb.My hearth is beating I can fell it
I tried to load stock rom it stoped in %1 and a black screen with exclamation and triangle around it
it says 208002 not allowed I tried sd card
Nobody is writing Please help
then its not the correct stock rom. if that was a voda rom, then it mustn't be a rom locked hd2. try the unbranded roms.
Rom filenames starting ruu_leo_HTC means non operator branded.
OR, re-apply "1.66.hspl" using hspl2 and flash it again from usb.