Related
Ok, I will admit I am a total noobie with Android based phones. I have been on the Blackberry platform for years.
I just got my magic yesterday.
To my knowledge it has not been updated yet.
How would I go about seeing if it can be rooted? And what is the best way to get it rooted, if it can be?
I am an IT guy, I am not afraid to try things out, so give me some steps and I will do them ASAP.
Thanks!
1st, boot the phone by holding the back & power buttons. Tell us EXACTLY what is on the first 5 lines at the top of the screen.
From there you will know if your phone is rootable...
It says:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP50000)
CPLD-12
RADIO-3.22.20.17
May 8 2009, 21:02:32 .
does this help?
Those specs were the same as mine. I used the Relentless Rooter software to root my phone. It was free then but you now have to pay (you can find it in the app forum).
You can also use the unlockr one click method. Check his site and video. Remember to use the instructions for 32A. Some posters wrote that they could not use this method (flashrec) to flash the latest Amon_Ra recovery and the solution was to shorten Amon_Ra's recovery's name. I know this sounds foreign language right now, but I do suggest you read and research a bit, specially the comments posted under the unlockr's method.
Once rooted, you can find various custom Roms for 32A in the developers section. Make sure the Rom fits your radio and SPL.
Oh, once rooted, I would suggest changing your SPL 1.33.009 to an engineered SPL, like mine (I use 1.33.2010). You can do a search at google or within the developers forum to find out why.
CONSIDER YOURSELF EXTREMELY FORTUNATE, you have a HTC Magic with an OLD non perfected SPL. Hell it isn't even a protected SPL you can load custom roms right away without having to flash a a new SPL.
HTC Magic with that SPL are becoming rarer by the day.
I would look into what ROMs you're interested in, if you want a 1.6 ROM, I would recommend Cyanogen 32A Port or Amon_RA's 1.6 ROM.
If you don't need 1.6 and like Sense UI (I suggest youtubing Sense UI and Stock Android to see which you prefer), CursorDroid's Sense UI ROM is in my opinion the BEST ROM available for the HTC Magic.
Cyanogen and Amon_Ra's ROM will work with your current SPL (I believe). While CursorDroid's requires you to flash the SPL and Radio of your phone. Which is a bit intimidating for novices but if your well prepared and pay close attention to instructions it's easy.
Thanks to all, I used some simple instrutions.
I now have:
6.35.10.18 Radio
1.76.2007 SPL
And I installed the CursorSense32A-1.2.6.1 rom.
This is way better.
networkdawg said:
Thanks to all, I used some simple instrutions.
I now have:
6.35.10.18 Radio
1.76.2007 SPL
And I installed the CursorSense32A-1.2.6.1 rom.
This is way better.
Click to expand...
Click to collapse
Sweet, good job man.
I wish the person I bought my Rogers Magic from didnt do the update. Now I dont think I can root it
Wond3r said:
I wish the person I bought my Rogers Magic from didnt do the update. Now I dont think I can root it
Click to expand...
Click to collapse
Maybe it was a new Magic which the person obtained from the HTC Dream upgrade.
Taknarosh said:
Maybe it was a new Magic which the person obtained from the HTC Dream upgrade.
Click to expand...
Click to collapse
Yeah it was
Wond3r said:
Yeah it was
Click to expand...
Click to collapse
Then for sure it was updated. Rogers wouldn't send out units with the bugged ROM.
Have there been any Froyo or Eclair roms tailored specifically for the MyTouch3G 1.2 yet ?
I've been looking around and couldn't find a single rom OPTIMIZED _FOR_ the MT1.2 (The mytouch fender and all mytouch with 3.5 MM headset jack)
So far everything just says 32a 32b. --when where we know we have more memory and more room to play .
Kind Regards,
David
Cyanogenmod 5.0.8 Eclair for Magic/Dream/Mytouch/G1. I am running it on my Fender Edition right now. Everything works great. Can download directly from Cyanogen's site.
With all due respect.
I said specifically made for the mythouch3g 1.2
With all due respect, you do not have more memory (RAM or ROM) than the standard 32A.
So any 32a rom will work on a mt3g fender ed?
Is the rooting/unlocking bootloader method the same as a standard 32a then?
thanks for any help, sorry for the off topic post
I thought the standard mytouch had 192mb of RAM, whereas the ones with the headphone jack had 288mb. Or was it just the Fender one that had 288?
Sent from my HTC Magic using XDA App
Nope, you're correct. The MT3g 1.2 has 288mb RAM, and the original MT3g has 192mb
So will any 32a rom work on a mt3g LE?
Honestly, I've not seen a ROM just for this phone. Except the rooted stock ROM.
NetrixTardis said:
Honestly, I've not seen a ROM just for this phone. Except the rooted stock ROM.
Click to expand...
Click to collapse
Then you haven't been looking hard enough
OP, you can try Cyanogenmod 6 (2.2 Froyo ROM.) I've been running it it all day and it's pretty awesome. It utilizes the extra RAM and the headphone jack works.
C0dy said:
Then you haven't been looking hard enough
OP, you can try Cyanogenmod 6 (2.2 Froyo ROM.) I've been running it it all day and it's pretty awesome. It utilizes the extra RAM and the headphone jack works.
Click to expand...
Click to collapse
I'm aware that there is quite a few ROMs that support the mytouch 1.2/Fender LE, but again the OP is looking for ROMs that are *only* for the 1.2... which except for the stock rooted ROM... there aren't any...
ROMs out are for magic 32a/mytouch 32b/mytouch 1.2/fender le... sooooo..........................................................................
NetrixTardis said:
I'm aware that there is quite a few ROMs that support the mytouch 1.2/Fender LE, but again the OP is looking for ROMs that are *only* for the 1.2... which except for the stock rooted ROM... there aren't any...
ROMs out are for magic 32a/mytouch 32b/mytouch 1.2/fender le... sooooo..........................................................................
Click to expand...
Click to collapse
Ah, okay. Every ROM for the 1.2 is a port besides the stock root ROM.
C0dy said:
Ah, okay. Every ROM for the 1.2 is a port besides the stock root ROM.
Click to expand...
Click to collapse
which version of CM6 are you running on your MyTouch 3g 1.2?
I thought the LE/32a/1.2 whatever were all identical??
Even if they're not, the memory specs are the same but no rom specifies LE/1.2, so are all 32a rom's compatible with the LE/1.2?
I dont understand why the OP thinks his 1.2 is so special/different, when I was pretty damn sure hardware wise they were the same.
well, Fender LE/mytouch 1.2 are identical - that is to say they are a 32a board, with a 32b radio, a new touch screen and the 3.5mm jack.
The 32a magic is a different thing, uses the 3.22.x or 6.35 radio, and the matchinl SPL.
both have the 288mb RAM since they use the 32a boards, but in the US the fender/1.2 is back to the 1.33.x SPL and the 32b/G1 radio w/2.22.xx
NetrixTardis said:
well, Fender LE/mytouch 1.2 are identical - that is to say they are a 32a board, with a 32b radio, a new touch screen and the 3.5mm jack.
The 32a magic is a different thing, uses the 3.22.x or 6.35 radio, and the matchinl SPL.
both have the 288mb RAM since they use the 32a boards, but in the US the fender/1.2 is back to the 1.33.x SPL and the 32b/G1 radio w/2.22.xx
Click to expand...
Click to collapse
so does this mean that all 32b/G1 ROMs are compatible with the myTouch 1.2? I just got mine like two days ago so I'm trying to find out what I can/can't flash. Like could I go over to the G1 boards and flash those ROMs safely?
dsky25 said:
so does this mean that all 32b/G1 ROMs are compatible with the myTouch 1.2? I just got mine like two days ago so I'm trying to find out what I can/can't flash. Like could I go over to the G1 boards and flash those ROMs safely?
Click to expand...
Click to collapse
For the most part, Yes, unless it specifies some other requirements.
All G1 roms with a CM kernel will work on the mytouch 1.2
MT3g 1.2 Roms
@Cody, I noticed in your signature for your phones that you are running CM 6.0. I have the identical phone set up. Except when I tried to flash over to CM 6.0 from Chromatic 4.1 Test 16 it damn near bricked my phone. It went into a boot loop. Long stroy short, I used my GoldCard to recover. However, I'm still interested in how you got the ROM to work. Can you help?
mistere372002 said:
@Cody, I noticed in your signature for your phones that you are running CM 6.0. I have the identical phone set up. Except when I tried to flash over to CM 6.0 from Chromatic 4.1 Test 16 it damn near bricked my phone. It went into a boot loop. Long stroy short, I used my GoldCard to recover. However, I'm still interested in how you got the ROM to work. Can you help?
Click to expand...
Click to collapse
Did you do a full wipe before upgrading?
Yup CM6.0 RC2 works great
I had recently tried CM6 RC1 on my MYTG 1.2 (3.5mm Jack) and it went into a endless reboot loop so stayed on CM 5.08. I recently tried CM 6.0 RC2. Works awesome, silky smooth transitions as always. Better battery. Haven't yet tried Flash.
So bottom line CM6.0 RC2 works awesome on MyTouch 3G 1.2
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
Oct 21 2009,22:33:27
I've already rooted the phone using Cyanogen's wiki. Here's my phone info from fastboot:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPH31000)
CLPD-13
RADIO-2.22.23.02
Oct 21 2009,22:33:27
Couple things I'm not clear on:
1. The whole 32A/32B thing. For example, I have a 32A, but I can only flash 32B roms. Flashing a 32A rom makes it hang on black screen after the HTC Magic logo.
2. I've read that the MyTouch 1.2 and Fenders are all 32A. I've also read that for the phone to work properly, the stock SPL and radio have to be used. If that's the case, how are people running the 32A ROMs in the development section that require different SPLs and radios?
I guess what I'm trying to figure out is how to flash a 32A ROM on my MT3G 1.2 phone if they require non-stock SPL/radio and when I'm reading that I can't use anything but stock versions.
I'm probably mixing up old and new info, but I'm really confused. Flashing my Nexus One is so much easier
you got it mostly right.
The mytouch 1.2/Fender is a hybrid magic. It has the mainboard of the 32a (with 288mb RAM), but the radio of the MT3G 32b/G1, a new touch screen driver, and the 3.5mm audio jack.
So, really, someone named Zinx was able to make kernel patches to make it work. These patches were applied the CM 32b kernel. So any rom based on CM5.0.7test 2 kernel or higher has the needed drivers to work with the 1.2/fender le.
the true HTC magic 32a has a different radio. This is why the dev section is mostly of 32a with old radio/new radio ROMs. the 32b phones are just G1 with out the keyboards...
Basically you need to find ROMs that have been "ported" to run on the 1.2. I can recommend Cyanogenmod 5.0.8-DS. As it works really well. Make sure you look for the DS (dream/sapphire) one.
Sent from my HTC Magic using XDA App
So that means I'll never be able to run a 32A ROM on this phone, which means I'll never have my full 288MB RAM available?
Thanks for the replies! It's starting to make more sense to me. And here I thought I was going crazy
Currently I'm running jojotm's Minimou with pershoot's updated kernel and it works very well. It's faster than I expected it to be which is just fine for my wife. I have a Nexus One for my needs
No, the kernal or a ported ROM will let you use the full RAM.
Sent from my HTC Magic using XDA App
I posted this in Development by way of ignorance. so I am posting in the correct section this time. hopefully someone will take pity on me.
Hey guys. sorry if this has been asked before, but im just needing a little clarification. i just rooted my MT3G 1.2 and loaded CM6 stable ROM from Cyanogenmod's site. it is a great ROM, but im looking around for a vanilla 2.2 or 2.1 ROM and don't really know much about compatibility compared to other MT3G phones.
How am i supposed to know what ROMs on this site work for MT3G 1.2 and which ones don't?
The devs include supported radios in their ROM thread. They'll also usually have it listed in the thread title. I will warn you that there aren't many.
Sent from my HTC Magic using XDA App
DonJuan692006 said:
The devs include supported radios in their ROM thread. They'll also usually have it listed in the thread title. I will warn you that there aren't many.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
thanks for the info. at the moment my radio says 2.22.23.02 so i dont really know what ROM works with it when i only usually see 3.22 and 6.35... sorry. im just really ignorant when it comes to flashing.
They'll say myTouch 1.2 specifically. The 2.22 radio is normally a 32B radio but that's where the 1.2 is unique. It uses a 32B radio with a 32A board. Worse case scenerio that I've seen so far if you flash a ROM that isn't compatible is that you'll either start booting and it'll never finish, the touchscreen wont work, or you get thrown into a boot loop. All 3 are fixes by flashing a compatible ROM. I tried CM 6 and was unsatisfied with the performance so I downgraded to CM 5.0.8 and its worked pretty well for me for about 3 months now. Whatever you do, do not try flashing a different radio or SPL as you'll most likely end up with an expensive paperweight.
Sent from my HTC Magic using XDA App
DonJuan692006 said:
They'll say myTouch 1.2 specifically. The 2.22 radio is normally a 32B radio but that's where the 1.2 is unique. It uses a 32B radio with a 32A board. Worse case scenerio that I've seen so far if you flash a ROM that isn't compatible is that you'll either start booting and it'll never finish, the touchscreen wont work, or you get thrown into a boot loop. All 3 are fixes by flashing a compatible ROM. I tried CM 6 and was unsatisfied with the performance so I downgraded to CM 5.0.8 and its worked pretty well for me for about 3 months now. Whatever you do, do not try flashing a different radio or SPL as you'll most likely end up with an expensive paperweight.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
thank you very much for the info. at this moment, i am re-installing cm6 to see if it fixes a problem im having with Google Listen. if it does not, i already have cm5.0.8 on my sd card ready to be installed. i will keep an eye out for any new ROMs that work with this phone.
I really do want to try the Rogers 2.1 ROM thats out there right now, but im very scared of loading it without confirmation that it will work.
Rom Bible
Check the Rom Bible,
It has a list of the roms that have been used on our devices. I have used Chromatic, CM and Complete Eclair. As far as vanilla goes, try just flashing the fender stock rom and re-root with the Universal Androot application. This may be vanilla enough for you. I did that and it was too vanilla and settled on Chromatic 4.5. Although I am anxiously waiting for either Cyanogen or Chromer to get the Nexus One update loaded in. Good luck buddy it's rough out there for us MT3g1.2 guys. Oh, Dont use any Rogers rom's this will diffently mess with your phone. I was lucky enough just to experience boot loop but come to find out it could have easily been bricked.
Edit: by the way, I have been having trouble with the Rom Manager when it comes to flashing roms. I use Rom Manager for the back ups and restores. But when it comes to flashing a new rom use the RA Recovery 1.0.7G it works all the time. Otherwise you will get a Status 7 installation aborted.
MyTouch 3G 1.2, Black
T-Mobile
SAPPHIRE PVT 32A SHIP S-ON G
SPL: 1.33.0013
Recovery: Amon Ra 1.7.0G
ROM: Cyanogen 6.0.0-DS
Rom Manager for backup only
Set CPU 576 MHz
JIt On
Swap 32MB
Comp On
mistere372002 said:
Check the Rom Bible,
It has a list of the roms that have been used on our devices. I have used Chromatic, CM and Complete Eclair. As far as vanilla goes, try just flashing the fender stock rom and re-root with the Universal Androot application. This may be vanilla enough for you. I did that and it was too vanilla and settled on Chromatic 4.5. Although I am anxiously waiting for either Cyanogen or Chromer to get the Nexus One update loaded in. Good luck buddy it's rough out there for us MT3g1.2 guys. Oh, Dont use any Rogers rom's this will diffently mess with your phone. I was lucky enough just to experience boot loop but come to find out it could have easily been bricked.
Edit: by the way, I have been having trouble with the Rom Manager when it comes to flashing roms. I use Rom Manager for the back ups and restores. But when it comes to flashing a new rom use the RA Recovery 1.0.7G it works all the time. Otherwise you will get a Status 7 installation aborted.
MyTouch 3G 1.2, Black
T-Mobile
SAPPHIRE PVT 32A SHIP S-ON G
SPL: 1.33.0013
Recovery: Amon Ra 1.7.0G
ROM: Cyanogen 6.0.0-DS
Rom Manager for backup only
Set CPU 576 MHz
JIt On
Swap 32MB
Comp On
Click to expand...
Click to collapse
thanks a lot for that advise. i did have a fender mytouch that bricked from goldcard error. i do agree that it was too vanilla for any real use. i just personally am getting a little tired of ADW. when you have something good for too long, it gets boring, but i by no means dislike it and will use any ROMs that have it. I will be checking on Chormatic right now to see what its like.
also, i always go into recovery for installing ROMs now. I usually also use Nandroid from the ClockWorkMod recovery to backup
DonJuan692006 said:
They'll say myTouch 1.2 specifically. The 2.22 radio is normally a 32B radio but that's where the 1.2 is unique. It uses a 32B radio with a 32A board. Worse case scenerio that I've seen so far if you flash a ROM that isn't compatible is that you'll either start booting and it'll never finish, the touchscreen wont work, or you get thrown into a boot loop. All 3 are fixes by flashing a compatible ROM. I tried CM 6 and was unsatisfied with the performance so I downgraded to CM 5.0.8 and its worked pretty well for me for about 3 months now. Whatever you do, do not try flashing a different radio or SPL as you'll most likely end up with an expensive paperweight.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
Thx you just answered my question lol - http://forum.xda-developers.com/showthread.php?t=788247
i though these phones were suppossed to have 288mb ram same as the hero ? in setcpu mine says 195mb ! ? :-(
Which ROM: Cyanogen 6.0.0-DS did you use 32a or 32b
mistere372002 said:
Check the Rom Bible,
It has a list of the roms that have been used on our devices. I have used Chromatic, CM and Complete Eclair. As far as vanilla goes, try just flashing the fender stock rom and re-root with the Universal Androot application. This may be vanilla enough for you. I did that and it was too vanilla and settled on Chromatic 4.5. Although I am anxiously waiting for either Cyanogen or Chromer to get the Nexus One update loaded in. Good luck buddy it's rough out there for us MT3g1.2 guys. Oh, Dont use any Rogers rom's this will diffently mess with your phone. I was lucky enough just to experience boot loop but come to find out it could have easily been bricked.
Edit: by the way, I have been having trouble with the Rom Manager when it comes to flashing roms. I use Rom Manager for the back ups and restores. But when it comes to flashing a new rom use the RA Recovery 1.0.7G it works all the time. Otherwise you will get a Status 7 installation aborted.
MyTouch 3G 1.2, Black
T-Mobile
SAPPHIRE PVT 32A SHIP S-ON G
SPL: 1.33.0013
Recovery: Amon Ra 1.7.0G
ROM: Cyanogen 6.0.0-DS
Rom Manager for backup only
Set CPU 576 MHz
JIt On
Swap 32MB
Comp On
Click to expand...
Click to collapse
So did you use the AMON Recovery so that you could get the 32a Cyanogen ROM? I ask this because when I use the ROM Manager user interface and use the "HTC/Magic(GSM)" recovery then my MyTouch 3G 1.2 will not boot into recovery mode at all but I can download 32A ROMS. However when I use the "ION/MyTouch 32(GSM)" recovery manager I can boot into recovery and I can download 32B ROMS. However the only ROM Manager ROMs I can downolad via the user interface are 32B ROMs. Clearly I have a 32A phone so I can run 32B ROMs but I believe it will not use all of my memory so I am going to try and manually load 32A ROM HTC/Magic(GSM) while running the the 32B recovery ION/MyTouch 32(GSM). I am however wondering if your running the AMON Recovery so that you could load the Cyanogen 6.0.0-DS 32A or if you are running the Cyanogen 6.0.0-DS 32B.
beastiezee said:
So did you use the AMON Recovery so that you could get the 32a Cyanogen ROM? I ask this because when I use the ROM Manager user interface and use the "HTC/Magic(GSM)" recovery then my MyTouch 3G 1.2 will not boot into recovery mode at all but I can download 32A ROMS. However when I use the "ION/MyTouch 32(GSM)" recovery manager I can boot into recovery and I can download 32B ROMS. However the only ROM Manager ROMs I can downolad via the user interface are 32B ROMs. Clearly I have a 32A phone so I can run 32B ROMs but I believe it will not use all of my memory so I am going to try and manually load 32A ROM HTC/Magic(GSM) while running the the 32B recovery ION/MyTouch 32(GSM). I am however wondering if your running the AMON Recovery so that you could load the Cyanogen 6.0.0-DS 32A or if you are running the Cyanogen 6.0.0-DS 32B.
Click to expand...
Click to collapse
See my fourth post. You can't run any ROM's that are specifically for 32A or 32B phones. The myTouch 1.2 is a hybrid and can only run ROM's specifically made for it. You don't have to use ROM Manager to download new ROM's. You can go to www.cyanogenmod.com, register for an account, and then go to their forum to download CM 6.0.0-DS and GApps. Take those two files and copy them to the root of your SD card, then load up recovery and flash from there. You'll also need to do a full wipe, but I'll let you do the research on that.
P.S. - CM 6.0.0-DS is for both 32A and 32B phones as well as the 1.2. The only difference is that the 32A phones need the EBI1 kernel flashed with everything else. For the 32B/1.2 you only need to install CM 6.0.0-DS and the Google Apps .zip.
DonJuan692006 said:
See my fourth post. You can't run any ROM's that are specifically for 32A or 32B phones. The myTouch 1.2 is a hybrid and can only run ROM's specifically made for it.
Click to expand...
Click to collapse
By what I've experienced, that's not necessarily true, I've flashed (specifically) 32B ROMs from the G1 section that have run great, such as a Sense ROM, CaNNon Eclair (does NOT say "MyTouch 1.2 support" in either thread).
What I'm trying to say is that its kind of a trial-and-error thing, if you see a ROM for the MyTouch3G or G1 that looks cool, make a Nandroid Backup, then flash it. If it doesnt work, so be it, if it does, SWEET!
Note my sig, i have a MyTouch 1.2
Is there a port of Froyd by villianrom team for Sapphire, LE 1.2 yet ?? Really really really would be sooooo great if someone could port that awsome rom
still looking for any ROMs that are confirmed for 1.2
checked the ROM bible, but its a little difficult to see which actually works this phone with all the radio numbers in each title.
Supported Roms
If you go to CyanogenMod's website, and look for the HTC Magic forum, it lists all supported roms for our MyTouch3G 1.2 phones. I am currently using CM6 and have no problems with it.
i just checked the pinned ROM bible again. apparently i was looking at a different post with the same title, the one pinned does have 1.2 version ROMs
im using CR_Slide2G1_v1 at the moment. some things dont work, but all-in-all, its a great copy of the MyTouch Slide OS. even the sense clock works perfectly.
I have a Mytouch 3G with the 3.5mm jack.
FASTBOOT Specs:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
Oct 21 2009,22:33:27
When I bought the phone (used) it came with 2.2.1
I was able to root the phone by downgrading to 1.6 using HBOOT and then using Universal Androot. I then installed Amon_RA's recovery (RA-sapphire-v1.7.0) using Rom manager.
I want to install Ginger yoshi but I don't understand the information regarding the SPL and the Radio.
I tried installing an Engineering SPL using the recovery mode but this caused the phone to stop booting either normally or to recovery. I had reinstall 1.6 using HBOOT and perform the rooting process all over again.
Do I need to change anything regarding the SPL and Radio in order to install Ginger yoshi or for it to work better?
Is there a different kernel I need to flash in order for it work or work better?
I realize a lot of this is addressed in various posts but I feel I've gotten too close to bricking for comfort and I need some advice specific to my situation.
Edit: I'm not at all set on using Ginger yoshi. I'm totally open to suggestions as far as Roms. I'd prefer a GB rom that's as fast as possible.
Changing the radio on your phone will have little to no effect on anything. Changing the spl will give you a not fully functional device.
If you want to use Ginger yoshi then yo will have to flash another kernel after. They have one in their download folder. The fender one.
A lot of roms (ezgingerbread ad cos are the ones i use) use autokernel so you don't have to deal with that
Oh also I think ezgb is much faster than the others probably beause it doesn't have all the cyanogenmod features (bloat). light and fast
tvall said:
Changing the radio on your phone will have little to no effect on anything. Changing the spl will give you a not fully functional device.
If you want to use Ginger yoshi then yo will have to flash another kernel after. They have one in their download folder. The fender one.
A lot of roms (ezgingerbread ad cos are the ones i use) use autokernel so you don't have to deal with that
Oh also I think ezgb is much faster than the others probably beause it doesn't have all the cyanogenmod features (bloat). light and fast
Click to expand...
Click to collapse
Thank you very much for your response. I'm probably going to install ezgingerbread but I have one question first. Do you know what the ginger yoshi post means when it says:
RADIO AND SPL INFO
for 32b you need SPL 1.33.0013d and RADIO 2.22.28.25 or 27.08
for 32a you need SPL 1.33.2010 or 1.33.2009 and RADIO you will need the old radio(3.22)
Click to expand...
Click to collapse
That's the part that got me confused. Can I just ignore that?
Edit: Is this: http://forum.xda-developers.com/showpost.php?p=9987696&postcount=2 the best (only?) source for ezgb binaries?
haddiman said:
Thank you very much for your response. I'm probably going to install ezgingerbread but I have one question first. Do you know what the ginger yoshi post means when it says:
That's the part that got me confused. Can I just ignore that?
Edit: Is this: http://forum.xda-developers.com/showpost.php?p=9987696&postcount=2 the best (only?) source for ezgb binaries?
Click to expand...
Click to collapse
Yes and yes I think.. haven't actually opened the link to check. Lazy