Related
well i made this a while ago, and finally got around to get it fully tested and release it.
this HardSPL is based on version 1.26 SPL. and is version 2 (2.00.cmon). also i *think* this one will not hard reset the phone
it's for any OPAL***** modelid now,
thanks to wlinsong and PhamQuang for testing
instructions:
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/...fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder (Opal_HardSPL_v2_0.zip).
2) you must have the phone synced with your PC, i.e. device must be in Windows Mobile!
3) run Opal_HardSPL_v2.exe.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) device should go to a grey screen
6) go on with RUU, Hard-SPL flashes, device automatically reboots, job done.
7 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 2.00.cmon
+1: if the screen won't go to grey mode (SSPL), then try manually entering SSPL by using the Opal-SSPL-Manual.zip - run the EXE on the phone then when it went to grey screen, run the HardSPL exe on PC and flash.
finally, donations are always appreciated to the "To Cmonex" link in my signature
now, enjoy the hardspl and cooked roms
UPDATE: How to flash stock SPL back for warranty purposes - please use this only if you need to return device for repair!
steps:
0. first flash entire stock ROM, then after that you can flash stock SPL as *last step*. do not reverse this flashing order please
1. get the RUU_Signed.NBH file from attachment (opalstockspl126.zip (185.3 KB))
2. run hardspl package from attachment (Opal_HardSPL_v2_0.zip)
3. *after* Opal HardSPL EXE extracts files, replace extracted RUU_Signed.NBH with the one from opalstockspl126.zip i.e. when asked to overwrite, say Yes, if it doesn't ask, then you are trying to copy it before running the HardSPL EXE, which is the wrong order.
4. flash just like you flashed HardSPL (see original instructions above)
5. device reboots, you can now check if it says 1.26.0000 or still 1.26.cmon or 2.02.cmon, in the latter case you did something wrong, it has to show 1.26.0000.
Great work, thanks for CMONEX !!!
I don't fully understand what this is for, but looks important soo THANKS
lupacche said:
I don't fully understand what this is for, but looks important soo THANKS
Click to expand...
Click to collapse
it's to allow you to flash any rom PhamQuang is already cooking some rom for opal i believe
OPAL10000 modelid
how do i check modelid?
FINALLY!!!!Congratulation !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
cmonex said:
well i made this a while ago, and finally got around to get it fully tested and release it.
this HardSPL is based on version 1.26 SPL.
it's for OPAL10000 modelid, if anyone has a different model, report in this thread... those should be tested out before doing anything.
thanks for wlinsong and PhamQuang for testing
instructions:
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/...fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must have the phone synced with your PC, i.e. device must be in Windows Mobile!
3) run Opal_HardSPL_v1.exe.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) device should go to a grey screen
6) go on with RUU, Hard-SPL flashes, device automatically reboots, job done.
7 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.26.cmon
+1: if the screen won't go to grey mode (SSPL), then try manually entering SSPL by using the Opal-SSPL-Manual.zip - run the EXE on the phone then when it went to grey screen, run the HardSPL exe on PC and flash.
finally, donations are always appreciated to the "To Cmonex" link in my signature
now, enjoy the hardspl and cooked roms
Click to expand...
Click to collapse
Thank for your hard working, but there's new issue occour.
When I tried to dump the hardspl, the error message appear"image file corrupted", then the work has been ceased.
If you have any idea about it, please kindly guide me!!
dpauser said:
Thank for your hard working, but there's new issue occour.
When I tried to dump the hardspl, the error message appear"image file corrupted", then the work has been ceased.
If you have any idea about it, please kindly guide me!!
Click to expand...
Click to collapse
Heihei~~ Just read the guide instruction carefully, I have fixed the problem.
And currently, I flashed a HK Rom code on my device.
However, I found a new issue. The this device has Compatibility with the BT ear price. I'm using a Itech D-Clip Radio one. When the call is coming, the call will be actived.But after the call, the BT connection will disconnect.
Any one has idea about this? Thanks a lot to all.
itaychi said:
how do i check modelid?
Click to expand...
Click to collapse
see bootloader screen (tricolour) it will say OPAL100 or similar... if the number is 100 then ok. if not, post in this thread
EDIT: oops, possibly for opal there is no modelid displayed there (could someone verify - i dont have an opal). use getdevinfo in mtty. but easiest is just try the spl package and if you get modelid error, post.
Hi cmonex, can you please make a HardSPL for the Touch 3G (Jade).
congratulations
hope to get fresh news on blackstone
thanks Cmonex
can it be used for htc T2223?
another question:
Can the rom upgrade file in the following link be burnt into my htc t2223?
http://www.htc.com/hk-en/SupportDownload.aspx?p_id=175&cat=2&dl_id=422
hi cmonex ! i've try ur hardspl , and i got a problem , my VIVA is hardspl now , but i try to use NBHTOOLS to dump the os.nb out of a WWE official rom and then use htc rom tools to rebuild a nbh file, but can not flash in to my viva . but i try flash that original official rom ,it works , is it my bad ? something i miss?
here is my htc rom tool setting:
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=64
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$301
RadioN=Radio
System=$400
SystemN=System
when i flash my edit rom , the ruu erro is "code 270 Updata erro the image is incorrect"
thanx alot for your hardwork
terry888_1978 said:
hi cmonex ! i've try ur hardspl , and i got a problem , my VIVA is hardspl now , but i try to use NBHTOOLS to dump the os.nb out of a WWE official rom and then use htc rom tools to rebuild a nbh file, but can not flash in to my viva . but i try flash that original official rom ,it works , is it my bad ? something i miss?
here is my htc rom tool setting:
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=64
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$301
RadioN=Radio
System=$400
SystemN=System
when i flash my edit rom , the ruu erro is "code 270 Updata erro the image is incorrect"
Click to expand...
Click to collapse
flash the radio as 0x300..
dr33 said:
can it be used for htc T2223?
another question:
Can the rom upgrade file in the following link be burnt into my htc t2223?
http://www.htc.com/hk-en/SupportDownload.aspx?p_id=175&cat=2&dl_id=422
Click to expand...
Click to collapse
if htc T2223 is htc viva, then yes
cmonex said:
flash the radio as 0x300..
Click to expand...
Click to collapse
but i've tried flash the os only , still not work ! u means i need to add the radio into it?
Stickied.
Ta
Dave
terry888_1978 said:
hi cmonex ! i've try ur hardspl , and i got a problem , my VIVA is hardspl now , but i try to use NBHTOOLS to dump the os.nb out of a WWE official rom and then use htc rom tools to rebuild a nbh file, but can not flash in to my viva . but i try flash that original official rom ,it works , is it my bad ? something i miss?
here is my htc rom tool setting:
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=64
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$301
RadioN=Radio
System=$400
SystemN=System
when i flash my edit rom , the ruu erro is "code 270 Updata erro the image is incorrect"
Click to expand...
Click to collapse
terry888_1978 said:
but i've tried flash the os only , still not work ! u means i need to add the radio into it?
Click to expand...
Click to collapse
terry ,
I've got the same problem as you.
vivi
terry888_1978 said:
hi cmonex ! i've try ur hardspl , and i got a problem , my VIVA is hardspl now , but i try to use NBHTOOLS to dump the os.nb out of a WWE official rom and then use htc rom tools to rebuild a nbh file, but can not flash in to my viva . but i try flash that original official rom ,it works , is it my bad ? something i miss?
here is my htc rom tool setting:
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=64
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$301
RadioN=Radio
System=$400
SystemN=System
when i flash my edit rom , the ruu erro is "code 270 Updata erro the image is incorrect"
Click to expand...
Click to collapse
%1 Get a error270,image file corrupted!!!
htcrt.ini
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=1024
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$300
RadioN=Radio
System=$400
SystemN=System
Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.
mitesh20360 said:
Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.
Click to expand...
Click to collapse
can u please put a little more light on this
mitesh20360 said:
Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.
Click to expand...
Click to collapse
couple of questions I wanna ask u..
1. when u bought ur device was it a brand new one or a used one??
2.are u sure ur device is not locked?? did u check you your IPL??
3.what is your IPL/SPL compination??
hope that's not much.. thanks
and by lock, are we talking about cid-lock or sim-lock?
crapula512 said:
and by lock, are we talking about cid-lock or sim-lock?
Click to expand...
Click to collapse
Yeahhh... i was thinking about it too
Answers!!!!!!
I bought my elfin in the year 2008.
not knowing how to use after few months i flashed elf rom and found that my device was restarting and of no use....
i learned about unlocking from this website after seating hours and hours.
i have gsm one.
elfin.
How to flash any rom...
I have original rom loaded and with ipl/spl of 2.xx
but now i have ipl/spl 3.14.com.
loaded more that 100's of roms of 6., 6.1, 6.5.
any rom.
first of all you need to know your device configuration to load any rom.
if you have detailed configuration then you can load it.
currently loaded wm6.5 28011 onyx. rom.
radio : 3.34
procedure!!!!!!
i will be enclosing the safe procedure for flashing...
no worry.....
you will learn to load and make your own flash...
give to few days time..
mitesh20360 said:
I have original rom loaded and with ipl/spl of 2.xx
but now i have ipl/spl 3.14.com.
loaded more that 100's of roms of 6., 6.1, 6.5.
any rom.
first of all you need to know your device configuration to load any rom.
if you have detailed configuration then you can load it.
currently loaded wm6.5 28011 onyx. rom.
radio : 3.34
Click to expand...
Click to collapse
if your spl says spl 3.14.com.... it means you have done HSPL... and thats the normal thing everybody do to go in for safe cookedroms flashing..
sorry bro there is nothing special about your case
opss!!!
but i have changed he ipl/spl/radio/flashed/many roms/ changed pagepool file/ all that can brick a fone..
i have recently edited the onyx rom 6.5 28011 and flashed for my htc
if you want you can also just i will put links n procedure to flash the rom.
ok. so will you put the links to the procedure. well coz after upgrading ur spl/ipl you can flash any rom you want.
reply
srgudhka said:
ok. so will you put the links to the procedure. well coz after upgrading ur spl/ipl you can flash any rom you want.
Click to expand...
Click to collapse
well
i not that i can load any rom my making rom.
like wise any specific rom i s made for specific mobile so as i make any rom specific for my mobilbe and even fon's battery level is 10% then also i can easily flash rom its in secs. and easily configure my cell easily..
mitesh20360 said:
well
i not that i can load any rom my making rom.
like wise any specific rom i s made for specific mobile so as i make any rom specific for my mobilbe and even fon's battery level is 10% then also i can easily flash rom its in secs. and easily configure my cell easily..
Click to expand...
Click to collapse
rather than keeping it a secret you should share your knowledge. everyone know one can cook a rom and flash it on his mobile. i suggest please be clear with your english.
no secret
sorry for my bad english.....
give me few days i will have to give link to software and procedure.
if any thing goes wrong with procedure then cell will brick and have hard format with no data in it.!!
so
its not any secret it is for knowledge.......
any can do it...!!!
Procedure for flashing (how i am flashing rom)
I have phone elfin 128mb ram.What you want softwares:
1) device info software for information regarding your device.
2) rom extractor... htc rom image editor version 0.4.0.51
AnDim
3) ROM builder. With this tool you can build a ROM (*.nbh)
from a rom parts (*.nb) in a comfortable interface.
by - Alexander "Dark Simpson" Simonov.
you can flash rom compatible with your CID (country/caller id) i.e. rom that you are going to flash must have cid of your phone.
steps:
Connect your Phone and establish Activesync Connection
find following for flashing:
Device ID : ELF0******
CID : ur cid. of phone.
GSM.nb radio file
IPL_H3.nb ipl h3 file
OS.nb os file extracted from built rom.
SPL.nb spl file
For deviceID you need to have software called deviceinfo.exe
http://forum.xda-developers.com/showthread.php?t=418892&page=18
download link: http://forum.xda-developers.com/attachment.php?attachmentid=129675&d=1258726424
then download any rom say onyx 6release. latest.
http://www.mediafire.com/?vjey0kz5ng0
then you will get RUU_signed.nbh
extract OS.nh from RUU_signed.nbh
save to one folder.
then you will need.
GSM.nb radio file
IPL_H3.nb ipl h3 file
SPL.nb spl file
extract same from follwoing links:
radio: http://forum.xda-developers.com/showthread.php?t=527048
choose as per yuor choice.
same extract
GSM.nb from *.nbh and save to folder.
similarly do for ipl/spl.
so you have following files needed for making your compatible rom:
IPL_H3.nb ipl h3 file
SPL.nb spl file
GSM.nb radio file
OS.nb os file extracted from built rom.
Step 2:
Now make rom for your elfin
you need to have software called
ROM builder. With this tool you can build a ROM (*.nbh)
from a rom parts (*.nb) in a comfortable interface.
Alexander "Dark Simpson" Simonov
link:http://www.real-radio.ru/htcrt/download/htcrt.zip
download the tool run in your pc, a pic that i have attached of that software.
then
run htcrt.exe
then start,
then ROM builder,
choose ur phone.
in that choose the relevant options for your phone/requirement
put Model ID:, Country ID:, Version: 3.14.706.02
language:WWE
firmware contents:
load all that you have stored in your folder the files you want.
IPL_H3.nb ipl h3 file
SPL.nb spl file
GSM.nb radio file
OS.nb os file extracted from built rom
then press
Build!
you will find that you have give name to your file named it
RUU_signed and it will make rom for your phone.
after it is completed it shows everythings seems to be ok
then close you have build your own rom compatible with your mobile.
RUU_signed.nbh
now flash it to your mobile.
how will you?????
steps:
have custome ruu files in one folder
following files must be there:
RUU_signed.nbh
EnterBootloader.exe
ErrorBattery.fig
ErrorUSB.fig
ModelID.fig
rapitool.exe
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Temp.bat
then run
ROMUpdateUtility.exe..
must connect your phone through usb.
start your phone pressing camera key you will see triple colour screen showing ipl/spl/
blue,green,red.
flash it from pc.
after every thing is over your will get message update complete.
your will get your rom flashed. but every data before flash must be back up.
this is bit lengthy but easy to use and flash....
if found probs reply me
well good one. tried it. works. but this is a lengthy process. rather dont you think cid unlocking it once will allow you to flash as many roms as you want. once you have unlocked it you just need to a custom ruu and a rom file. thats it. rest you know how to go about. i appreciate your method.
edit: wrong post - plz delete
Salve! I have a SIM lock Elfin KPN Netherlands. You can unlock? Not allow me to rewrite the IPL and SPL.
hi,
I flashed AHEN 6.5.x E6m Full (I am not sure about was it CID Unlocked) ....during the flashing everything was ok but when the phone restart first appear the Windows mobile screen then I see the Vodafone Logo then does not continue (not start up)...
After that I tried to switch of it did not....
When I remove the battery and put it back press power button it show an
ERROR message;
Device start up failed due to sudden loss of power.Please click Yes to continue.
Note: Do not remove battery before device has been completely shut down (OFF)
What should I do now...Please explain me the procedure what to do?
Thanks for your answers....
rfn13 said:
hi,
I flashed AHEN 6.5.x E6m Full (I am not sure about was it CID Unlocked) ....during the flashing everything was ok but when the phone restart first appear the Windows mobile screen then I see the Vodafone Logo then does not continue (not start up)...
After that I tried to switch of it did not....
When I remove the battery and put it back press power button it show an
ERROR message;
Device start up failed due to sudden loss of power.Please click Yes to continue.
Note: Do not remove battery before device has been completely shut down (OFF)
What should I do now...Please explain me the procedure what to do?
Thanks for your answers....
Click to expand...
Click to collapse
dont play with dude...
flash it again...
provide info about ur phone..elf?hspl?
this information is before I made the flashing
device info;
Touch version : Elf
Device ID : ELF010000
CID : VODAP102
IPL : 1.15.0002
SPL : 1.15.0000
ROM Version : 2.20.707.1
ExtROM Version : Blue Touch ROM V4.0
Operator Version: None
AKU Version : 0.7.0
Page Pool (MB) : 4
RAM Size (MB) : 64
ROM Size (MB) : 128
Model No. : ELF0300
Part Number : 99HDM070-00
SIM Unlock Code : 84275853
Its not possible to reflash becauze I cant sync the phone It not starts the phone the last screen which appear is the vodafone logo.....
rfn13 said:
this information is before I made the flashing
device info;
Touch version : Elf
Device ID : ELF010000
CID : VODAP102
IPL : 1.15.0002
SPL : 1.15.0000
ROM Version : 2.20.707.1
ExtROM Version : Blue Touch ROM V4.0
Operator Version: None
AKU Version : 0.7.0
Page Pool (MB) : 4
RAM Size (MB) : 64
ROM Size (MB) : 128
Model No. : ELF0300
Part Number : 99HDM070-00
SIM Unlock Code : 84275853
Its not possible to reflash becauze I cant sync the phone It not starts the phone the last screen which appear is the vodafone logo.....
Click to expand...
Click to collapse
so u r in hurry...
big mistake...
u havent hspl and urs is elf ...not elfin..ahen is only for elfin...
try this..search for dsixda thread for ELF GOLD CARD to unbrick ur device..
read this
http://forum.xda-developers.com/showthread.php?t=445666
and ur life line is here
http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard
what do u think is it possible to make working my device again?
dsixda thread for ELF GOLD CARD..Is it at forumxda this thread?
I read some about elf gold card but i couldnt understand to much things to do...
rfn13 said:
what do u think is it possible to make working my device again?
dsixda thread for ELF GOLD CARD..Is it at forumxda this thread?
I read some about elf gold card but i couldnt understand to much things to do...
Click to expand...
Click to collapse
hey dont afraid now when u had already did it..
u can try it..read it carefully...
if it doesnt work for u then go to service centre..they will definayely do it.l
ok try this
http://forum.xda-developers.com/showpost.php?p=2913636&postcount=1
Hi guys, after 48 hours of excessive research and trials and errors I've found a way to flash NBH roms to a friend of mine's HD2 which has corrupt model ID (some strange symbols in place of the model ID in bootloader screen). Unfotunatelly his device has hardware problems so even I flashed it, It was not fixed.
Anyway I've decided to post this here, so everyone with this problem can use the solution to flash their devices.
Note: you must have HSPL (installed before the corruption) or goldcard (not tested with goldcard) for this to work.
So the problem is RUU flasher shows error 244: Invalid model id. It's because of the corrupt ID. What can be done? In short:
Make NBH with matching ID
1. Mtty -> info 0
2. Copy model ID symbols (you should paste exactly the same symbols in txt file!!)
3. Use YANG to extract files from any rom/radio NBH. (http://code.google.com/p/htc-flasher/wiki/YANG)
4. Use YANG to create back the custom NBH with your corrupt model ID. (use exactly the same symbols for model ID !!)
5. Flash NBH with RUU flasher, or SD card. (I prefer SD card because you can see more details)
Note 2: If you're flashing a device with HSLP DO NOT INCLUDE SPL NB file in the NBH !!!
I've tested this even with MAGLDR 1.13 and it flashes well.
So far the only sollution to this problem was JTAG, I hope this will change. Please give feedback in this topic for any success/no success, and also for goldcard with regular SPL.
Have fun!
yea, good one, be interested in seeing this confirmed, , bet there's thousands of hd2s in dusty drawers around teh world, just waiting to be revived.
Hello Again guys!
So, my Phone was freaking out and i did Hard Reset, then i don't know why but when I turn on Phone it tells me
Code:
Software Update Failed. Please try again
then it goes to
Code:
[COLOR="Red"]00028002[/COLOR]
not allowed
and then i see RED-GREEN-BLUE-WHITE menu with
Code:
HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
when i try to install HSPL4.exe it says about rapitool.exe error.
and oh, when i try to do task29 or ANYTHING through HD2 toolkit everything ends with Connection error (check if your phone is connected...blah..) :crying:
I don't know how to bring my Oldie to the living world, would love to install WM 7.8 on it, could someone take me through journey how to make it?
Now i cannot use my phone at all no possibility to take it to the GSM store to repair or something.
I think i gave enough information about my problem, if something tell me.
Sorry but i cannot attach photos.
PLEASE answer back and help me out!
I believe in you Guys!!
You just don't have HSPL. And since Task29, cLK & MAGLDR depend on it, you'll get an error.
Try running HSPL with Admin Rights, it should work.
Marvlesz said:
You just don't have HSPL. And since Task29, cLK & MAGLDR depend on it, you'll get an error.
Try running HSPL with Admin Rights, it should work.
Click to expand...
Click to collapse
still RAPITOOL error, it comes with Microsoft Windows Mobile Device Center, but i cannot install this on Win8 64 bit..
Btw thanks for quick reply maybe we will make it works today
Okay, are you running HSPL.exe from within a zip? If yes, extract it to a folder and try again (run as admin).
If it still doesn't work, I can upload rapitool here. You put it with the same folder and run HSPL again.
Edit: Uploaded rapitool. Download, extract and put in HSPL folder.
ok, i put everything into one folder, run as admin and RAPI.dll is still missing "try to reinstall program BLAH BLAH"
Damn it
Lol, I'm starting to think you don't even have a good package, or the drivers for that matter.
Try this one: http://forum.xda-developers.com/showpost.php?p=43622736&postcount=2
Edit:
Download Windows Mobile Device Center. I forgot about this, I am running Windows 8 x64 and I have it running flawlessly. How come you are unable to install it?
I was almost happy until i got this"
Code:
CRITICAL ERROR
Flow: 00000003
Error code: 00000004
Description: Bad model ID!
meh,
Uh-oh, this doesn't look good.
Here, give this a read: http://forum.xda-developers.com/showthread.php?t=1182215
Marvlesz said:
Uh-oh, this doesn't look good.
Place Holder..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=706064
found this, but i dont have Telstra model, so idk what to type in this .txt file
ZathuraPL said:
http://forum.xda-developers.com/showthread.php?t=706064
found this, but i dont have Telstra model, so idk what to type in this .txt file
Click to expand...
Click to collapse
No, no. Read my previous post.
The solution is in page 2 and 3.
Marvlesz said:
No, no. Read my previous post.
The solution is in page 2 and 3.
Click to expand...
Click to collapse
Yup i posted that before you Edited your previous post
Gonna try with MTTY 1.42
i hope it will work !
Doing HSPL from HD2 toolkit gives me same INVALID ID error..
If that one doesn't work, you can try this one: http://forum.xda-developers.com/showthread.php?t=1001452
WHAAAAAAAAAAAT
Now it looks like this!
Code:
RUUNBH (at right-top corner)
[COLOR="Red"]PB81100[/COLOR] HX-BC
[COLOR="Red"]SPL-2.08.HSPL 8G[/COLOR] XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Upgrade ROM code error
Please try again
Serial
/not connected to PC yet.
What to do now?!
#EDIT, editted code, forgot to add RUUNBH at right-top of screen and forgot to change SPL
Ok, installed HSPL succesfully (watched JayceOoi's video how to do it good)
Now it rebooted, said same "Software Update Failed."
and now i have WHITE background with
Code:
LEOIMG.nbh -
RADIO_V2 -
RCUST -
BOOTLOADER -
SPLASH1 -
OS -
CONFIGDATA -
Press power button to start update image
Press Voldown button to cancel update image
Not sure what to do now, i will just say that i want to move to WM 7.8 , and i dont know where to get my Stock RUU file :/ HTC site is crap and won't help me with this.
I will leave it like this until Someone will help me with this now, but i see theres progress with my problem.
Thanks Marvlesz!
Turn off the phone and remove the sdcard and delete whatever LEOIMG.nbh you got on it. Then tell me what shows up on the bootloader screen.
P.S: I appreciate it, but thank me when your problem is fixed
Marvlesz said:
Turn off the phone and remove the sdcard and delete whatever LEOIMG.nbh you got on it. Then tell me what shows up on the bootloader screen.
P.S: I appreciate it, but thank me when your problem is fixed
Click to expand...
Click to collapse
I cannot connect Phone to Lappy, so i have to put SD into another phone and remove leoimg from another phone, right?
Yes, if you don't have a card reader to put it in the computer directly.
Crap, searched everywhere and there is missing Adapter of course :/ i will try to do it tomorrow or today if i borrow any smartphone lol :/ and what should i do after clearing sd card? what if i cannot find valid stock rom?
EDIT:
managed to install wp 7.8, but now i am stuck on silver hTC logo :|
http://forum.xda-developers.com/showthread.php?p=43849183#post43849183
#post158
ZathuraPL said:
EDIT:
managed to install wp 7.8, but now i am stuck on silver hTC logo :|
http://forum.xda-developers.com/showthread.php?p=43849183#post43849183
#post158
Click to expand...
Click to collapse
That's another problem. It could be the sdcard, or the phone. I suggest going to Android and check if everything is working properly. But I lean towards the sdcard, since WP is known to be incompatible with many card brands.