I have my phone plugged into my computer, and just had it wake itself twice with no input from me. I wonder if this could be a contributing factor to the EVO's lackluster battery.
Logs:
Code:
D/WimaxStateTracker( 152): poll dhcp after timeout --- dhcp.wimax0.dns1 =
D/SurfaceFlinger( 152): Screen about to return, flinger = 0x143558
D/SurfaceFlinger( 152): screen returned
D/SurfaceFlinger( 152): wakeup flip
… other stuff happened while the screen was awake
D/SurfaceFlinger( 152): About to give-up screen, flinger = 0x143558
D/SurfaceFlinger( 152): screen given-up
Related
hi,
a Have 2 problems,
Sometimes after switch on the display, brightness has set to maximum, after a while display sets brightness to normal..
Everyday display automaticly turns on at 00:00 ( i had same problem in my old D1 )
thanks for help
Just wondering what settings (other than default) CM7 users are using for their automatic backlight. I've been experimenting for a couple days and have settled for this... for today at least.
Light sensor filter: Enabled
Window length: 20s
Reset threshold: 800 lux
Sample interval: 2s
Screen dim level: 10
Edit other levels...
Lower 0, 50, then 100-3000, increasing by 100's (32 total levels)
Screen 10-175, increasing roughly by 10's
Allow light decrease: Enabled
Decrease hysteresis: 80%
I'm looking to get a smooth(er) transition from each level. A fading appearance rather than a "hitting a light switch" appearance.
Here's a few posts
http://forum.xda-developers.com/showpost.php?p=14387052&postcount=8450
And..
http://forum.xda-developers.com/showpost.php?p=8653968&postcount=4335
Also, here is a write up about what the settings do, just for your information
http://voidmain.se/cm/lights/
after I connected an external battery through multimeter instead of a built-in battery, I received such current values in different modes (values in mA):
Boot 300-800
Lockscreen / Media Scan 700-1200
load browser Dolphin 250-1200
browser idle 230-250
browser with sliding left and right panels 800
loading BIG forum page over EDGE 500-1200
over Wi-Fi 500-1600
Cool Reader day mode,
min brightness 210
mid 300
max 460
Cool Reader night mode,
min brightness 180
mid 200
max 210
Desktop with totally black wallpaper
at idle 180-230*
with sliding of elements 300-400*
end of the list, glow effect 800*
Desktop with base wallpaper 260*
Desktop with live wallpaper Galaxy 300*
* at middle brightness
Call at the phone
screen on 300-700
screen off (proximity sensor) 120-160
Screen off, standby mode 1-2,
periodic bursts to 16.
with browser at background, bursts to 250-400
IM at background, bursts to 270.
IM new message 400
Dungeon Defenders 800-1600
Video 720р mkv 270-420
Sketcher, with totally white screen 650-700
1-2 mA in standby is very good! But as expected it uses quite a bit with the screen on and when we're actually using it. No surprise!
Hi, everybody!
A new firmware has appeared on Sammobile for Italian Galaxy Tab 2 7" P3110.
The update bears no version number, PDA P3110XXDMD1, CSC P3110ITVDMD1.
I flashed it yesterday, and the only feature I could find was a new "smart Stay".
This time it seems to be working, though.
Tested this way:
* Set screen timeout at 120 secs (the default)
* Touched the screen and started timer
* Kept looking here and there on the screen while leaving it untouched.
* At sec 105 an eye icon appeared in the status bar, smart stay activated.
* Kept looking here and there
* At sec 110 the eye icon appeared again, the screen did not dim out.
* At sec 120 the screen did not power off, kept staying bright and visible.
* At sec 150 the screen was still on.
* Repeated the test leaving my tablet face up on a table, far from my eyes
* Touched the screen and started timer.
* At sec 110 the screen dimmed out slyghtly
* At sec 115 the screen dimmed almost totally out
* At sec 120 the screen was off
Since I wear glasses I was uncertain if the "smart stay" would detect my eyes, but it seems smart enough to see through my lenses.
I have had not time to further looking for new changes, maybe there is more, but a working smart stay can be worth your while.
Just wanted to share my experience.
Does anyone know how can i calibrate the accelerometer?
I have this issue and is annoying:
When i hold my device on vertical the accelerometer readings are 0, 84 , 6... on horizontal are normal 0, 0, 90.
In camera mode virtual tour it is forcing me to lean the device backward... please help i don t want to return the product because it doesn t have any other issues...