Hi all,
first off all i'd like to say Hi to everyone as im new here.
Also id like to thank everyone for readingmy problems
Any way i purchased an XDA II about a Week ago from Ebay its really my fault as in the item description it said there was a problem with the phone it wont start as its locked.
The phone goes to a Blue screen after you ON it and do the screen configiration etc
The blue screen has Cognito on it saying 'Warning this Devcie is Locked'
then under it:
'If you are installing from the MMC card please wait.
Otherwise, either insert the MMC card and do a cold boot, or contact Cognito to unlock the device.
Im not sure what this means and if i leave the phone for a while or type it from it takes me to a password screen in white with the keyboard on it.
----
Im not sure what to do if you can help me you will save me alot of money otherwise do i just chuck the phone away also
ive tried a Hard Reset by clicking the POWER BUTTON, RESET KET.
nothing happens just the phone loads up and makes me Calibrate the screen.
Ive tried this process while also pressing the D-PAD i get a screen with Serial with V1.06 i think at the bottom
i dont really know how i can know if its Hard resetted.
So please peolple take a Minute to help me thanks alot.
may work not too sure though
hey man i feel sorry for you
okay wot u do is download the o2 rom for the device because u sed it is a xda2 so download and install that. this will do a comlpete rest not like hard reset it will deleted absolutly everything on the xda2 and then install indows 2003 back onto it it will be like getting a new fone. try it i hope it works for u
HI
Thank you so much.
For your Advice and Time.
can you confirm this will remove that Lock thing ?
Also do you know where i can download Win2003 for XDA II o2 UK
Thank again
Hi,
I flashed the himalaya M1000 with WM2003se upgrade. but still could not remove the Cognito (shame).
please if somebody can help that would b nice
Should do. I've done the 1.72 update on it based on the ROM from this site and all is good.
any help is gratefully received.
i was doing a rom update(pugs) and the unit has become stuck in what i think is bootloader mode. the screen is dark and displays "serial v1.01
after much searching on this forum i tried to hard reset then run maupgradeut again.
problem is that activesync no longer detects my device.
ive tried pressing power/reset/action buttons to no effect.does this mean i now have a pretty coffee coaster.
now you were at bootloader mode. try remove the device n put it back on cradle, for sure windows will detect it. after that, try run the upgrade again. The problem that you're having now are same like me when I first bought my device. The answer is good being a newbies n ready to ask question at here. hahahahah
thanks
now youve hit the nail squarely on the head. i thought i knew enough to update but when its gone boobies up realised i dont.
ive tried resetting the device and then connecting to my pc several times with no success.
anyone know how to take the device out of bootloader mode. im hoping theres a backup stored on the device that will boot...or...anyone know how to get the pc to recognise the damn thing before i launch it out of the window(all the way to an o2 shop).
im sure im not alone(can hear the voices)
took some brain power on my part. turns out microsoft activesync was the problem.
upgraded to the latest version and everything went as it should.
hi guys, i have been reading on upgrading to wm5 and thought i would give it a go, i put a file on my handset called getdevicedata, as soon as i run this on my handset my handset went to serial and now i can not reset it, i have tried hard reset and also taking battery out for a wile but the screen is stuck on serial??? please help guys, it is also showing not connected and will not connect with activesync when i put into the cradle.
ANY HELP OR INFO AT THIS TIME GREATLY APPRECIATED !!
Thanks
alan
i am realy struggling guys, i have been searching the forum for a couple of hours and cant find any advice on what to try to unbrick my handset, that is if it is bricked. if any one could drop a link t any helpfull info i would be very greatfull.
thanks
Is my blue angel bricked? i have serial at top and v2.07 at bottom, when i put into cradle i get usb, i have disabled the active sync and downloaded mtty.... am i on the right tracks for putting it right guys,i dont know how to use mtty, im geting stressed out now as i have searched the sight several times with no look.
Cheers
hey bro !!
i got this imate jasjar 2 years back and i love my uni allot.
need a help from you bro...i am new to all these hav been goin through 100z of threads everyday bt not gettin my answers i hope you would help me out..!!
actually my jasjar suddenly started behavin weird it switched off by itself n wen i switched it back on after the windows mobile screen shows up my jasjar gets a dead blue screen n nothin happens.
tried to connect with active sync 4.0 and 4.1 bt it would not respond and show dat the phone is not connected.
i came across a thread in which a guy said to press bright light button + power button+softreset it sent my phone to a usb mode
then i used mtty tool and its command task 28 to check if my jasjar is wasted or still breathin lucky enough it dint give a formatfaliure msg and there were some steps i followed .
everything went as told n now m stuck on where to get official wm5 for jasjar and how to get out of the usb screen and how to flash the rom...??
please help
To exit boot loader mode: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
With regard to restorig WM5 - I have the official O2 XDA Exec files for their last software release. But I think you said your's is an iMate.You could see if the iMate version listed here: http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades is still available - if not maybe someone has a copy somewhere.
Hope this helps.
hey dat was gr8 bro....bt m still stuck with finding of wm5 for my imate ...!!
i found i mate upgrade bt when i clicked on download an error popped up "550 or 505 change of directory sumthin..."
well i followed the instructions u sent me it worked well bt still need to flash with wm5 ...!!
any chance of u or ur known havin a copy of wm5 rom
its been weeks and everything is gettin hazy ur help would be appriciated allot
thank you so much ..<!!
bro thankx for help i actually flashed my uni with kdskamal cooked wm5 bt my jasjar still gets dead on a greenish screen as it used to get before in blue screen wht m i supposed to do...??
Hi,
Try flashing with a WM6 rom (Tomal's ROMs are always good) and see if you get the same symptoms.
If you do then I suspect that you have a screen/cable connecting screen problem.
But lets rule out software first.
greetings bro...!!
i was up all night flashing wms
i used mtty software so many times that its commands are like hard weird in my brain cant get them out now....lolzzz
my stubborn uni was still stuck on the same dead screen but the only fun thing was that every time i flashed a new wm it used to get stuck on diff colours blue red green black...lolzzz
i scratched my head and i scratched my ass to an extent that i guess it started thinking lolzzz
i got some nice screw drivers and opened up my uni..
damn dis thing is wicked and messy it has things dat i dont know about n havnt even dreamd of in my stupidest dream i hav been lost in a computer motherboard with some good virus as my friend n some bad scary virus but in my uni motherboard i would neva..!
so i just fixed it back...n it worked for a while n den i dont know what tickled its ass.
busted again...!!
i guess ill hit the HTC service centre.
thanx allot bro
respect for ur effort and help...
Hi
for some strange reason the option "incoming com port" in the blue-tooth setting on my jasjar has disappeared. i was wondering if anyone else faced the same problem or if there is a way around it? editing registry n stuff.
because of this the previously paired devices are working fine but the new devices are unable to search the serial/com port facility on my uni.
i have tried resetting but still no luck.
any suggestions?
also i would really appreciate if someone could give me a solution for reading arabic and other such languages on uni.
(btw i am using i.e.TML 8.5 Rom and when i installed it at first the functionality was present so it cant be a ROM issue.)
...
lol... sorry abt earlier maite! i just realized the ridiculous thing i just did. i was supposed to post the reply to ur prob and then start with my sad story but somhow i managed to skip step one .
i m not expert on the device but i like it very much so i when i got one with my o2 contract i bought another one sim free just so that one would keep other company. as far as ur issue goes i have faced almost the same prob in the past and the solution was
1) rotate the screen 90 to get acess to screws at the bottom of the screen.
2) open the screws screws ... btw u might wana check if they are properly fastend before you try this step as i observed that if the screws are properly tightened this problem may solve itself... carrying on open the screws and that would detach the screen from the hinges.
3) where the hinge comes off strip open the cover a little bit and you will see two connections, one for the backlight and one for display (just like any other LCD screen.
4) press the big grip like thingee i.e. display connector with a flathead screw driver to assure they are properly in place. because in my case the connector had come off and hence was causing the system crash. although in my case the screen was only going blue after a while not the whole color palette.
just try if this one works because i m not sure if imate people are going to be any help in this case. i tried calling them a few months back for the lenscover and they said they dont support this device any more :S.
Hello everybody! It's samanen here, a newbie on xda. NOOOB
For first I'd like to apologize my not-so-good english, I'm 15 and from Finland so please keep the point in the problems and forget my english difficulties
Ok, splutting off and let's move to the point here
So I bought my HD2 (used) about two weeks ago, and right away tried to put WP7/android on it and sync music, contacts, videos and other stuff - but my USB connection didn't, and still doesn't work.
Ofcourse I tried reconnecting, cleaning the usb cable and port on the phone, tried another PCs and total of 10 different USB ports, another cable, Mac OS, Win7, WinXP, SyncMate, WMDC, ActiveSync, removing the battery, resetting the phone, removing SD-Card and SIM-Card, ActiveSync, Hard Disk and Faster data sync options, etc etc with no positive result. Its no fun having a mobile device with no access to put media and other stuff on it :/
Specs and facts:
HTC HD2 (aka Leo), non-T-Mobile (EU version?)
Software info:
Os Version : 5.2.21913 (21913.5.0.94)
Manila version : 2.5.20181527.0
ROM version : 3.14.405.2 (04666) WWE
ROM date : 09/29/10
Radio version : 2.15.50.14
Protocol version : 15.42.50.11U
Hardware info:
CPU : QUALCOMM(R) 8250B
Speed : 1024 Mhz
RAM size : 448MB
Flash memory size : 512MB
Enough numbers?
I think I have tried all the stuff I found here... Still no result, can't be detected on my PC. When I connect my phone to my PC, a notification pops up saying that USB device couldn't be detected/recognized, and it may be damaged. 1 second after it popped up it disappears and if I check the devices connected to the pc, there's no undetected devices anymore.. If I'm quick enough to click on the notification, it shows me what devices are connected and their situations, and I can see an undetected USB device there, but if I refresh (reopen) the window it disappears..
Also, if I use the option "When phone is on, do not charge the battery when connected to a PC." and connect to a PC via USB, it STILL does charge the battery. So my hypothesis is that the phone believes it's on a charger/car kit because its not getting recognized as a USB hard disk/device on my PC and still charges as it's connected to PC. Could this be possible in any way?
Also, when I got the phone and put it on the charger, CoPilot popped up every second (I closed it, it opened, etc) and I had to uncheck some option "When connected to a car kit open CoPilot automatically", so another thing there which refers to my phone being a psycho and believing its being on a charger.
I know there are people with this problem, and topics on this forum, but I think my problem is a bit different from theirs and nobody has really got an answer for this..
Then to my second problem. I can't enter Bootloader mode, or Hard Reset mode.
When I hold down the volDown button and press the bootup button, my phone either normally boots up or doesn't even boot up or show signs of booting into bootloader.
Once I got into the bootloader after dozens of tries, but as I'm stupid, I didn't write down the numbers shown there.. And now I seem not to be able to enter bootloader even after 20 tries.. Hardreset neither works. Same plan - either normally boots up or doesn't do anything. Weirdo much? Can anyone help? :/ I think I've bought an useless device..
Thanks,
samanen
Hi man! Try to flash your phone from SD card with stock ROM. Hope you will get good result! Let me know what happens!
Maybe it is your usb cable. I also can not sync with the cable that was delivered with the official carkit. It is just possible to load the device with that cable.
Your bootloader problem could be caused by broken volume buttons. I think they often get destroyed when replacing a broken touch screen. Do they work without problems inside the os?
Sent from my HTC HD2
Sawyer1103 said:
Hi man! Try to flash your phone from SD card with stock ROM. Hope you will get good result! Let me know what happens!
Click to expand...
Click to collapse
Hai there! Thanks for your suggestion! What rom version would you recommend? I'm such a noob with these roms etc so I'd appreciate much if you/somebody could tell me what to use I will try that as soon as I find my microSD->SD adapter (Im afraid it got into vacuum cleaner as I cleaned my room ), also I have no idea how that's done but I believe there's a tutorial on xda.
rauschkugl said:
Maybe it is your usb cable. I also can not sync with the cable that was delivered with the official carkit. It is just possible to load the device with that cable.
Your bootloader problem could be caused by broken volume buttons. I think they often get destroyed when replacing a broken touch screen. Do they work without problems inside the os?
Sent from my HTC HD2
Click to expand...
Click to collapse
I have tried 2 different cables, one from the package the previous owner provided me and another one from my dad's N97 mini. Could I be so unlucky that those cables are ones that don't work with HD2? I hope I am If you think its about the cable, what cable would you suggest me to get? Just a basic microusb cable from the electonic store? Also the previous owner told me he wiped out all the data and synced the phone before sending it to me WITH the cable provided, so.. Idk Strange.
No, my volume buttons are working great inside the os, I can adjust vol down and up well without any problems. Also my volbuttons are not sticky or feel like broken so I just don't believe that theyre damaged. Also the screen has never got damaged or repaired.
Another problem - Isn't it required to enter bootloader mode when updating the rom? :/
Thanks for both of you for your replies and suggestions, I will keep you updated if anything helps or gets clarified!
-samanen
Sorry then i can not help you. I do not think it is the cable. I bought one on amazon. It is official htc charging and syncing cable. This just came to my mind because you said that your copilot starts if you plug your phone in....
If you want to install another winmo rom you can do it when connected via active sync and it will automatically go to bootloader. If you want to install hspl for custom roms or android you have to go to bootloader for the installation.
Sent from my HTC HD2
rauschkugl said:
If you want to install another winmo rom you can do it when connected via active sync and it will automatically go to bootloader. If you want to install hspl for custom roms or android you have to go to bootloader for the installation.
Click to expand...
Click to collapse
Connected via ActiveSync :/ But the problem is I can't connect my phone.. (bluethoot neither works -__-)
By your info i can say that you have European Model phone. You must firstly check volume buttons, after. Download official ROM by IMEI of you one. As i know sometimes problem in usb connector in phone. I repair some HD2's by replasing usb connector. I living near you) In little poor Belarus))) try this steps and let me know.
Also. If u want i can help you in repair process. Its very simple) i have a big experience with hd2's and iPhones) and other ones. Because i think you boughta bad repaired phone with bad volume buttons and usb connector
Sawyer1103 said:
Also. If u want i can help you in repair process. Its very simple) i have a big experience with hd2's and iPhones) and other ones. Because i think you boughta bad repaired phone with bad volume buttons and usb connector
Click to expand...
Click to collapse
Man, do you think they could fix this in warranty/quaranty? I have still warranty left on this one and i think I could get a new one/HD7 in return
Yeah. They must fix it if you dont damaged phone mechanically(maybe previous owner replaced screen) or you dont flash hspl magld android Leo is still The King i think. Here more opportunities than in HD7 On eBay HD7 cheaper than HD2 because WP7 os not good than android let me know whats up!
Sawyer1103 said:
Yeah. They must fix it if you dont damaged phone mechanically(maybe previous owner replaced screen) or you dont flash hspl magld android Leo is still The King i think. Here more opportunities than in HD7 On eBay HD7 cheaper than HD2 because WP7 os not good than android let me know whats up!
Click to expand...
Click to collapse
No, I've never dropped it or anything and when it came from the previous owner the usb didnt work, and he has never replaced anything on this model (his previous model was replaced to this, completely new one because his previous model stopped working with no reason).
Maybe I should contact the warranty Thanks for the answers, let's see what they can do!
samanen said:
No, I've never dropped it or anything and when it came from the previous owner the usb didnt work, and he has never replaced anything on this model (his previous model was replaced to this, completely new one because his previous model stopped working with no reason).
Maybe I should contact the warranty Thanks for the answers, let's see what they can do!
Click to expand...
Click to collapse
I think all will be good. By what price you bought this one?) Do you want to install android after warranty center?
Sawyer1103 said:
I think all will be good. By what price you bought this one?) Do you want to install android after warranty center?
Click to expand...
Click to collapse
I changed my old iPhone 3G 16Gb white, in terrible condition to this HD2 and paid 100€ Yeah android or WP7 would be soo super cool, the customizability is the thing why I chose HD2! It's amazing how there are still developers developing new stuff for HD2, I highly aprreciate their work
Waiting for their reply from the warranty center!
Let me know. Whats going on! And i will help you to install all)
Sawyer1103 said:
Let me know. Whats going on! And i will help you to install all)
Click to expand...
Click to collapse
Still no reply, wow. Today I got a message that my phone will be back in two weeks. Slow service.
They also told me, that as the usb is LOOSE when you plug the cable in, it may be my fault. wow. So they're not repairing it for free i quess..
My phone is back..
Ok, got my phone back. The mohterboard has been damaged, they told me it had got wet. That's something what's not under warranty, so they're not repairing it for free. The repair would cost almost 500€ so it's totally not worth it. The report says: USB-Connectiong is loose (from other components), also injury with water in screen and motherboard.
Seems that the last owner already knew it's damaged and sold me a damaged one, as he told me it's working 100%.
So, I don't have a clue what to do next. I think I should try repairing it myself but is it worth it? Or worth trying? Where can i get the parts and tutorials how to do this? I think i gotta only repair the usb thingy but i'm not sure - I'd love to get some help now. Thanks in advance.
-samanen
htc hds usb problems (using Android 2.3.4 CyanogenMod)
Hello guy's / lady's,
i need some help aswell. hope im at the good page for this.
i have a phone htc hd2 for a year now. i have put alot of android versions on it and with no problems at all. for this site Xda- developers. ( thnx guy's)
but on the last 1 that i have now i can't us my usb port anymore. other hand my battery is loading with the cable but the pc doesent see my phone ,
i habe boot load my phone to with volume button down and pressing off button and if i try to use the usb cable to connect to the phone i don't see and usb text comming up.
hope youguys can help me with this problem. want to update this version of android.
greetings Dolle
dollegek said:
Hello guy's / lady's,
i need some help aswell. hope im at the good page for this.
i have a phone htc hd2 for a year now. i have put alot of android versions on it and with no problems at all. for this site Xda- developers. ( thnx guy's)
but on the last 1 that i have now i can't us my usb port anymore. other hand my battery is loading with the cable but the pc doesent see my phone ,
i habe boot load my phone to with volume button down and pressing off button and if i try to use the usb cable to connect to the phone i don't see and usb text comming up.
hope youguys can help me with this problem. want to update this version of android.
greetings Dolle
Click to expand...
Click to collapse
I had the exact same problem and it seemed that my cable was loose. You can try repairing it by yourself (it's not under warranty) or trying different pc/cable.
Try this : go to your pc and remove USB driver from application control panel,and after reconnect hd2.
Probably us not a cable problem, but drivers problems.
Bye.
Sent from my HTC HD2 using XDA App
i have the same problem i can't go to bootloadr.
can any one help me How i can fix my hd2? plz
it's the screen stop on white HTC