Hi
i have a o2 xda exec, i am new to this device. I used wifi and it worked fine near the router but as i move away, like 2-3 steps away from it the connection drops, it only work in my room and not even at the door of my room.... my question is why is this happening as i used i-mate jamin and i could use it's wifi much far away like in the other rooms.
wm 5.0
ROM version: 1.13.82 WWE
ROM date: 11/30/05
Radio version: 1.04.02
ExtROM version: 1.13.188 WWE
Welcome to forums
I never heard of a similar problem, but I would do a hard reset to discard any 3rd app making trouble.
Check my signature to learn how to
Good luck,
Thank you for your reply.
i have tried hard reset but nothing i even tried the method in the following link but nothing helped.
forum.xda-developers.com/showthread.php?t=471910[/url]
Perhaps a hardware damage on MB?
Hope experts can give a better advice to you.
Good luck,
Related
Hi Guys,
Just to say THANKS to everyone out there, not only the developers but the normal mortals too - who put in effort to help people here.
I have uploaded the Windows mobile 2003 to my site. Its on a super mega link (great words ) I get 1meg a sec+ when i download from it at work !
http://www.ali.nildram.co.uk/xda/
Cheers Guys
OK it's seems to upgrade the Radio any issues? What if I upgrade the radio to ATT's? Ideas thoughts anyone?
Salam
Thanks Ali-Butt
Othman
since phone upgrade i have noticed that gprs is a tad faster. 8)
Does it support Sim Tool Kit
Hi Ali,
Does this upgrade have the sim tool kit?
Thanks in advance :?:
isn't this the same version everyone has been using?
I just have to run the executable file right? I don't need an SD Card writer or anything for this download? just my normal connection and activesync? what if the upgrade screws up? can i reload the old ROM image? and where do i get it!
Thanks a lot!
hi from Riyadh
Hello again
well, what i have notice there are more then one version of WM2003
one of them which i downloaded from http://members.lycos.co.uk/xdarom/ where i couldn't downgrade using the nornal method and i was force to use SD Card to go back to my previous ROM but the other version which i downloaded from this FTP Server 195.64.88.44 xda/xda works pretty good and i was able to downgrade to XDA-Developers Special ROM version 1.2 with no problems and without using SD Card.
thanks again for sharing
Othman
http://www.pocketpc4arab.com
Is it possibile to upgrade to wm2003 thru USB cradle ? My current version for Asian XDA is:
ROM version: 3.14.17 ENG
ROM date: 10/11/02
Radio: 4.17
Protocol: 32S54
Has anyone tried to upgrade an asian XDA (EN version) ? Any problems ?
Thanks,
I upgraded my XDA last night via my USB cradle. I had NO problems at all. Took a little longer than normal :?: But other than that it was fine.
Gil
Gil,
did you use Ali file uploaded on his site ? Is your XDA UK or Asian version ? Which nr ?
Thanks,
no service
Can someone help a newbie out here - I installed the WM2003 no problems and then installed to 4.21.00 radio stack
but now my phone get's no service any ideas? Im in Texas on T-mobile
Please, see this link may be useful for you
http://xda-developers.com/forum/viewtopic.php?t=1687&start=75
brix3 said:
Is it possibile to upgrade to wm2003 thru USB cradle ? My current version for Asian XDA is:
ROM version: 3.14.17 ENG
ROM date: 10/11/02
Radio: 4.17
Protocol: 32S54
Has anyone tried to upgrade an asian XDA (EN version) ? Any problems ?
Thanks,
Click to expand...
Click to collapse
I had the same set upwith yours previously. I upgraded to SER 1.2 and WM 2003 after that. I also upgrade my radio stack to 4.21 from O2 UK. But now, I am back with SER 1.2 and Radio stack 4.21. I wish Icould go back to my old Radio Stack 4.17.
With 4.21 Ilost the "G" and signal strength for GPRS.
I hope my experience helps.
Beeheij, why didn't you keep the 4.17 radio version with WM2003 ? Was it not running properly ?
I think it's always dangerous upgrading the radio module with newer version dedicated to other regions (UK)
Thanks,
brix3,
I want to back to 4.17, but I cannot. Somehow during the process of rolling back I was kicked out.
As for the WM2003, the problem was in the SMS mode. When I picked a phone number, the "+"sign in my contact was not transferred tothe address in the SMS. So each time I wanted to send SMS, I had to correct the phone number.
My Battery Pack was not working. It hung my XDA.
Hope this helps
Has anyone in the US used or done this upgrade? Since it also upgrades the Radio Stack I'm just wondering. If GPRS is getting dropped as stated in other posts it is more that the network drops you or you lose data connection between cells, or the network has a load balance that give placement to voice users over data when bandwidth is needed. Not so much that your radio stack does it.
On the other hand just incase anyone wants to prove me wrong :wink: who in the US has upgraded their radio stack to O2 4.21 and experienced a better performance than AT&T's radio stack (speed stability as staed on their website) :?: This means you probably already had to manually switch the default band 8) first, right? :x
Let me know I love to be wrong :shock: ......I'm only that much smarter than I was yesterday :roll: :lol:
I'm a little confused. I upgraded to XDA v1.2 and my Device Informations are:
ROM Version: 3.17.03
ROM Date: 05/15/03
Radio Version: 6.18.00
Protocal Version: 324e4
How is it that my radio version is so much higher?
-
i must admit this version of ppc2003 is the dogs danglys compared to the old ozone version
Phoxie_Phreak said:
I'm a little confused. I upgraded to XDA v1.2 and my Device Informations are:
ROM Version: 3.17.03
ROM Date: 05/15/03
Radio Version: 6.18.00
Protocal Version: 324e4
How is it that my radio version is so much higher?
-
Click to expand...
Click to collapse
as far as i know XDA v1.2 will not touch your Radio, it will just replace your old CE ROM with the new one which has lots of cool stuff.
regards
Othman
First of all, I'd like to thank everyone who posts to this forum - I've been reading it for a month or so now and am constantly impressed with the quality of the knowledge here, especially the developers...
I have a QTEK 1010 bought here in Dubai, UAE, with the following device info:
ROM version: 4.00.01 ENG
ROM date: 05/16/03
Radio version: 3.23.01
Protocol version: 32S54
I have found that browsing using IE feels slower, and have the feeling that this version of the ROM does not work well with the radio version. Does anyone reading this forum live in the UAE? I'd like to upgrade the Radio, but need to know which version works best with Etisalat (our Telco).
Any comments much appreciated!
Thanks, Doms...
P.S. I'm going to upgrade the ROM to 4.00.05 when I get the opportunity
hi, i am from dubai and i am using 4.00.1 from t-mobile and 4.21 from o2, so far everything fine just when i reset the t-mobile logo appears.
do you have bluetooth option in that version and your version was already installed or you upgraded yourself?
Use the o2 Radio Version 4.21 it will work fine...
Thanks for the responses guys. Does this new radio version provide any benefits over the one I have?
kamiar said:
hi, i am from dubai and i am using 4.00.1 from t-mobile and 4.21 from o2, so far everything fine just when i reset the t-mobile logo appears.
do you have bluetooth option in that version and your version was already installed or you upgraded yourself?
Click to expand...
Click to collapse
1) The QTEK does not support Bluetooth, and there is no way to make it work on a QTEK either.
2) There is no Bluetooth option in any of my menus or settings (I would expect this as my device does not support Bluetooth). Windows PPC2003 is supposed to be able to support Bluetooth, however: http://www.microsoft.com/windowsmobile/products/pocketpc/about/2003/bluetooth.mspx
3) I upgraded to the 4.00.05 version of Windows PPC2003 myself using Jeff's ROM Kitchen (thanks Jeff!) http://cuba.calyx.nl/~jsummers/ROMkitchen/
Hi, Once i had 4.00.01 and in connection setting i had Bluetooth option but ofcourse it was not working, the other thing is do you know any camera work with SD port of Qtek? i mean something availble in the market.
4.21 is more stable i think.
cheers,
I had some problems when making calls on my QTEK yesterday. While in a voice conversation audible clicking noises can be heard and after about 1 minute of conversation the quality of the call deteriorates until the other party cannot hear me. I'll try upgrading the radio...
I don't know about the camera support using the SD slot in the QTEK. My first instinct would be to say no, it's not possible, but I can't confirm that...
I bought a Qtek 1010 in Dubai Duty Free the other week. I've since upgraded the ROM using ROMkitchen and am delighted with it. One thing I did notice though is that the speakerphone functionality (claimed in the Qtek handbook) doesn't seem to work. I didn't try it before I upgraded so can someone tell me if it works with the native UAE ROM code, and if so does anyone have any idea how I could get it working again?
David
I own a QTEK in the UAE and here is my share to those asking about OS and Radio updates here:
I upgraded from
ROM version: SER 1.2
Radio version: 3.23.01
To
ROM version: 4.00.10 ENG (T.Mobile Test)
Radio version: 4.21.00 (O2 UK)
Everyting seems to work fine apart from 2 minor issues so far:
Make sure you set your band to 900Europe as the default is 1900North America in phone/tools/options
The signal fades out sometimes but doznt affect the reception
No G signal but GPRS is OK.
GPRS stays connected; have to turn phone off and on to disconnect.
Advice:
Read a lot before you upgrade. This forum has a wealth of information.
Cheers
ridaz
Hiya all,
Firstly thanks to all you guys who have spent so much time and energy on developing these great tools and apps.
I have a problem.! Updated my XDA to PPC2003 from Yorch's kitchen; fine for 2 or 3 days and then it started doing soft resets and things of its own accord.
Anyone else had the same problem; and more importantly, anyone know how I can get round the problem. I'm now back on the old rom but liked the tools that 2003 had with it. Especially the phone bits, individual ring tones etc.
Somebody please help me. I have had a good look round the forums for info but everyone seems to be either obsessed with the XDA2 (aint we all.!) or the Tmobile rom update.
Thanks in advance for your help
Cheers :?
PPC2003 Config
Radio stack version 4.21.00
Rom Version 4.00.05
Original Config (which I am back to now)
Radio stack version 4.21.00
Rom Version 3.17.03 Eng
What version and radio
Which version of ppc2003 did you cook?
I have had great experience w/4.0.16 and radio 6.24.00 TMO
The first time I loaded I had some problems but I had forgotten to do a hard reset. The really small hole on the lower right by the head phone socket. I reloaded the new rom did a soft reset then a hard and Bob's your uncle it worked great.
Hope this helps. I doubt anyone can help significantly until you specify rom and radio version
As you can see, I have a real old version of Rom and Radio Stack!
Where can I get the new PPC2003 in combination with a new RadioStack?
Where did you get it from?
THX
www.yorch.net
That should get you what you need :wink:
Hello guys,
I was looking for a solution for my problems with my Qtek S200 and Google pointed me to this forum. Found lots of useful info here, however couldn't solve any of the problems I have. Hopefully some of you can help me.
1. no matter what I do, the device wouldn't sync through the USB cable, it will only sync through IR (I'm using ActiveSync 4.2, same problem with 4.1 before I updated)
2. wouldn't beam files through Bluetooth. No problems with receiving files though.
3. I've tried to update the ROM, however all I got was "Invalid vendor ID". I've tried Lockiwiz to unlock the S200 before trying to update the ROM, however it came up with an error message aswell, so it turns out to be impossible to update the ROM either. I've tried registering my device on Qtek's support website, but it wouldn't take my IMEI number.
More info on the S200:
ROM version: 2.9.7.24 WWE
ROM date: 2/9/06
Radio version: 02.07.20
Protocol version: 413.1.03
ExtROM version: 2.9.7.106
Model No: PM300
I would appreciate any opinions and suggestions on how I can fix these problems. 10x :!:
No Sync
Hi
I had this problem tried for hours to get it to sync nearlly sent the machine back then found this
It has a problem with certain firewalls follow the link tell you all about it. I use trend and I followed the instructions and all was well.
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
Hope this helps
stephen
Thanx s2tephen, that was really the problem! I went through Microsoft's instructions, however I had to exit the firewall to make ActiveSync work.
Anyway, 1 down, 2 left!
Unlocking
www.imei-check.com or www.imeicheck.com not sure which on but i used them cost £20.00 but worth it unlocked in about 5mins, can't have everything for free.
Check this thread out worked for me.
http://forum.xda-developers.com/viewtopic.php?t=46548
Took me a while to figure out where to copy the file but it worked!
10x everyone :!:
First off, great site so far, lets hope you can help fix my problem.
I got the O2 XDA Exec on Friday, since then I changed a few things in the registry to make it a bit better... then updated the rom to O2s latest one on theie site:
ROM version 1.30.107 WWE
ROM date: 04/11/06
Radio version: 1.09.00
Protocol version: 42.42.P8
ExtROM version: 1.30.162 WWE
My major problem now is, since updating the ROM to 1.30.107 WWE my WIFI wont connect or when it does it disconnects pretty quick, where as it used to stay connected forever. Also, when WIFI disconnects, it says Wi-Fi: Available but will try to connect to GPRS (costing me money which I don't want). Anyone know how to either get wifi to stay connected and connect all the time its available or stop GPRS from connecting when I dont want it to? Would this be due to a hack I tried to stop it shutting off wifi etc on standby? (I may have done it wrong)
Also, where can I get better updates for the ROM or is this the latest one? I'm not afriaid to hard reset or whatever as many times as needed, especially at the moment as it has hardly anything on it and what it has on I can easily get back on.
Furthermore, on the first ROM it had on it, unsure of version, there was a battery bar in Today, since updating this has gone, how do I get that back?
I have a load more questions but i will save those for when I get these ones sorted.
Any help appreciated.
Thanks