Hello guys,
I was looking for a solution for my problems with my Qtek S200 and Google pointed me to this forum. Found lots of useful info here, however couldn't solve any of the problems I have. Hopefully some of you can help me.
1. no matter what I do, the device wouldn't sync through the USB cable, it will only sync through IR (I'm using ActiveSync 4.2, same problem with 4.1 before I updated)
2. wouldn't beam files through Bluetooth. No problems with receiving files though.
3. I've tried to update the ROM, however all I got was "Invalid vendor ID". I've tried Lockiwiz to unlock the S200 before trying to update the ROM, however it came up with an error message aswell, so it turns out to be impossible to update the ROM either. I've tried registering my device on Qtek's support website, but it wouldn't take my IMEI number.
More info on the S200:
ROM version: 2.9.7.24 WWE
ROM date: 2/9/06
Radio version: 02.07.20
Protocol version: 413.1.03
ExtROM version: 2.9.7.106
Model No: PM300
I would appreciate any opinions and suggestions on how I can fix these problems. 10x :!:
No Sync
Hi
I had this problem tried for hours to get it to sync nearlly sent the machine back then found this
It has a problem with certain firewalls follow the link tell you all about it. I use trend and I followed the instructions and all was well.
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
Hope this helps
stephen
Thanx s2tephen, that was really the problem! I went through Microsoft's instructions, however I had to exit the firewall to make ActiveSync work.
Anyway, 1 down, 2 left!
Unlocking
www.imei-check.com or www.imeicheck.com not sure which on but i used them cost £20.00 but worth it unlocked in about 5mins, can't have everything for free.
Check this thread out worked for me.
http://forum.xda-developers.com/viewtopic.php?t=46548
Took me a while to figure out where to copy the file but it worked!
10x everyone :!:
Related
Dear Sir,
My Name Ahmed Kadry, I'm Chief Technical Officer for GoodNews4me, I did upgrade to my 32MB O2 through the web site http://www.myxda.com "RUU_CEv31417wwe_O2-Asia_C1204.exe " and "RSU(GPRS_416_ENG_O2).exe", and after doing the upgrade I'm facing problems with GPRS connection and the telephone as well, The problem is when I connect through GPRS for the first time it works but after disconnecting from the GPRS and try to reconnect again it fails plus if any one tries to call me after disconnecting, my mobile become out of service. It only works if I switched my phone off and then on again, I checked with Vodafone our network operator here in Cairo Egypt, the technical people said it is O2 Problem.
I have tried to use another O2 without being upgraded it works fine, it will be highly appreciated if you could advise on the subject, or how can I go back to my original ROM without upgrade for both files
My current O2 Info is:
IMEI: 350312010540248
ROM version: 3.14.17 ENG
ROM date: 10/11/02
Radio: 4.16
Protocol: 32S54
Mmmm.
I've had this as well. I'd be keen to find out a work around.
Cheers!
Simon.
Me too
Me and two of my friends are facing the exact same problem with GPRS connection after the upgrade, couldn't figure out a solution till now.
Thanks for sharing :shock:
hi all,
i think the only solution for this problem is to downgrade your RUU to 3.14.13, i faced the same problem before with asian upgrade !
after downgrade every thing is fine even battery life became better
best regards
The soultion is there
The solution is to uogarde to 4.17 it is avilable now on the following sit
www.myxda.com. It works perfect
Re: The soultion is there
abuseif said:
The solution is to uogarde to 4.17 it is avilable now on the following sit
www.myxda.com. It works perfect
Click to expand...
Click to collapse
May you send me the RUU and RSU file via Email? Or give me an other address to download it.
It's because my XDA have a IMEI that isn't allowed to download.... :-(
You can use my email: [email protected]
Regards
Stefan
or u can upgrade to the 3.19 version..
tried and tested
I have an i-mate K-JAM and need to get the t-mobile blackberry client working to access corporate email. I upgade my ROM to following:-
ROM ver 2.16.9.1 WWE
ROM date 2/6/06
Radio ver 02.07.10
Protocol ver 413.1.03
ExtROM ver 2.16.9.101
Installed Blackberry client and desktop with no problems but client will not connect. I could not install the t-mobile ROm as I has an Invalid Vendor ID message.
Any suggestions how I might get it to work, I have heard that the t-mobile client is incompatible with ROM ver 2.0, but also understand I cannot now load a lower ROM version.
Dude, I hate to bring down the rain on your head but if you look in this forum you will find an extensive thread on BB Connect for the Wizard. I'd suggest reading it - first off it doesn't work with AKU2 ROMs so you're on a hiding to nothing unless you downgrade. Second, the reast is in the thread.
Sorry for being a novis, but we need to start somewhere! According to the I-mate Club website once the ROM has been updated to AKU02 it cannot be reinstalled with older version. Any assistance/clarification very welcome.
shiskinegolf - imate club don't know what they're on about mate. Read the lokiwiz thread on this forum at the beginning and it will tell you how to SIM and CID unlock your unit. I'd also recommend reading the last three pages or so of discussion which takes you through the issues we were having unlocking AKU2 ROMS - there is a trick to it but I understand lokiwiz has been updated to make it work since we were using the get around. Once you have SuperCID unlocked you can install any ROM you like (that includes downgrading to an AKU1).
Hi XDA Gurus,
I am having trying to sync my phone with Windows XP. However the computer doesn't recognise the phone at all.
I am running Active Sync 4.5 on the desktop. Tried with 4.1, still no success.
I have also tried solution in numerous threads in this forum, still no success.
Also pls. help me in upgrading the ROM & OS on my phone and if possible links to download the ROM and O/S files for the upgrade.
Pls. help me.
Thanks,
Nitin
Rom Version: 1.21.110.3
Radio Version: 1.05..05.00
Protocol Version: 32.36.7010.04H
Hello,
Firstly, I must say that I previously posted this thread on a wrong forum.
I am relatively new in this forum and also new in flashing a new ROM. I have a HTC p3300 with original WM6 which I bought some years back. So my PDA is open (not given by a telephone company).
Relevant Information
ROM Version: 3.13.405.1 WWE
ROM DATE: 8/28/07
Radio Version: 02.94.90
Protocol Version: 4.1.13.44
ExtROM Version: 3.13.405.102
I have tried to read how to upgrade from WM6 to WM6.5 or any other good ROM, but the more I read the more I get confused.
Please can someone give me a useful guideline on;
Where to get a WM6.5 or any other good, light and tested ROM (English Version)
How to flash a new ROM
I will be very grateful for any useful advice.
Thanks,
Jonat
jonat said:
Hello,
Firstly, I must say that I previously posted this thread on a wrong forum.
I am relatively new in this forum and also new in flashing a new ROM. I have a HTC p3300 with original WM6 which I bought some years back. So my PDA is open (not given by a telephone company).
Relevant Information
ROM Version: 3.13.405.1 WWE
ROM DATE: 8/28/07
Radio Version: 02.94.90
Protocol Version: 4.1.13.44
ExtROM Version: 3.13.405.102
I have tried to read how to upgrade from WM6 to WM6.5 or any other good ROM, but the more I read the more I get confused.
Please can someone give me a useful guideline on;
Where to get a WM6.5 or any other good, light and tested ROM (English Version)
How to flash a new ROM
I will be very grateful for any useful advice.
Thanks,
Jonat
Click to expand...
Click to collapse
Hi,
for the guide: link
can you try using the latest of Shady313, I haven't try it, but he is a good cook : link
Bye,
Silvio
tnw513 said:
Hi,
for the guide: link
can you try using the latest of Shady313, I haven't try it, but he is a good cook : link
Bye,
Silvio
Click to expand...
Click to collapse
Hello,
Thanks for your message. I tried to follow the procedure as stated in the USPL documentation but along the line, I got an error, " Error 260" No connection between my computer and my PDA. I got to the stage (interface) where I can flash a new version of USPL on my device then the error appeared. I had a good established connection between the two devices before the error appeared.
So, what can be the problem? I am using Windows Vista.
Regards,
Jonat
jonat said:
Hello,
Thanks for your message. I tried to follow the procedure as stated in the USPL documentation but along the line, I got an error, " Error 260" No connection between my computer and my PDA. I got to the stage (interface) where I can flash a new version of USPL on my device then the error appeared. I had a good established connection between the two devices before the error appeared.
So, what can be the problem? I am using Windows Vista.
Regards,
Jonat
Click to expand...
Click to collapse
the problem is probably Vista...
See that in that case: --> link
Bye,
Silvio
Hi
i have a o2 xda exec, i am new to this device. I used wifi and it worked fine near the router but as i move away, like 2-3 steps away from it the connection drops, it only work in my room and not even at the door of my room.... my question is why is this happening as i used i-mate jamin and i could use it's wifi much far away like in the other rooms.
wm 5.0
ROM version: 1.13.82 WWE
ROM date: 11/30/05
Radio version: 1.04.02
ExtROM version: 1.13.188 WWE
Welcome to forums
I never heard of a similar problem, but I would do a hard reset to discard any 3rd app making trouble.
Check my signature to learn how to
Good luck,
Thank you for your reply.
i have tried hard reset but nothing i even tried the method in the following link but nothing helped.
forum.xda-developers.com/showthread.php?t=471910[/url]
Perhaps a hardware damage on MB?
Hope experts can give a better advice to you.
Good luck,