Unable to sync the MDA Vario II - 8525, TyTN, MDA Vario II, JasJam General

Hi XDA Gurus,
I am having trying to sync my phone with Windows XP. However the computer doesn't recognise the phone at all.
I am running Active Sync 4.5 on the desktop. Tried with 4.1, still no success.
I have also tried solution in numerous threads in this forum, still no success.
Also pls. help me in upgrading the ROM & OS on my phone and if possible links to download the ROM and O/S files for the upgrade.
Pls. help me.
Thanks,
Nitin
Rom Version: 1.21.110.3
Radio Version: 1.05..05.00
Protocol Version: 32.36.7010.04H

Related

Qtek S200 issues

Hello guys,
I was looking for a solution for my problems with my Qtek S200 and Google pointed me to this forum. Found lots of useful info here, however couldn't solve any of the problems I have. Hopefully some of you can help me.
1. no matter what I do, the device wouldn't sync through the USB cable, it will only sync through IR (I'm using ActiveSync 4.2, same problem with 4.1 before I updated)
2. wouldn't beam files through Bluetooth. No problems with receiving files though.
3. I've tried to update the ROM, however all I got was "Invalid vendor ID". I've tried Lockiwiz to unlock the S200 before trying to update the ROM, however it came up with an error message aswell, so it turns out to be impossible to update the ROM either. I've tried registering my device on Qtek's support website, but it wouldn't take my IMEI number.
More info on the S200:
ROM version: 2.9.7.24 WWE
ROM date: 2/9/06
Radio version: 02.07.20
Protocol version: 413.1.03
ExtROM version: 2.9.7.106
Model No: PM300
I would appreciate any opinions and suggestions on how I can fix these problems. 10x :!:
No Sync
Hi
I had this problem tried for hours to get it to sync nearlly sent the machine back then found this
It has a problem with certain firewalls follow the link tell you all about it. I use trend and I followed the instructions and all was well.
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
Hope this helps
stephen
Thanx s2tephen, that was really the problem! I went through Microsoft's instructions, however I had to exit the firewall to make ActiveSync work.
Anyway, 1 down, 2 left!
Unlocking
www.imei-check.com or www.imeicheck.com not sure which on but i used them cost £20.00 but worth it unlocked in about 5mins, can't have everything for free.
Check this thread out worked for me.
http://forum.xda-developers.com/viewtopic.php?t=46548
Took me a while to figure out where to copy the file but it worked!
10x everyone :!:

-->> Cannot connect to active sync or wmdc!!

hey guys!
i have a bad problem.
so, my os works (wm 6.1 xion build 20273.1.3.3) BUT i'm not able to connect my wizard with the pc.
i have vista premium and with vmare i'm using xp prof sp3. on vista i've tried to get them connected via wmdc. nothing.
with xp prof sp3 i' tried it,too... nothing. (both newest versions)
as an addition, i used usb cable and crable. nothing.
my wizard dont seem to exist ;(
ipl: 2.22.0001
spl: 2.22.0001
gsm: 02.19.11
os: 6.1.0.6
is there anything i can do???
does another method to flash a new rom exist?
greetz tears
SO NO ONE IS ABLE TO GIVE ME ANOTHER HIND???
guys, i already searched my ass off but didn't find anything so plz i u have an idea... tell me!!!
greetz

[HELP]Please Help me

Hi friends, here i am getting problem with my mobile, when i access windows update, i'm getting an error, "Connection to update server was not available. Please check your data connection" like that, but at that time i was able to browse net through Opera, i'm getting this problem after updating ROM, my mobile details are
ROM Version: 1.93.720.2 WWE
ROM Date: 08/07/08
Radio Version: 1.00.25.07
Protocol Version: 52.29.25.12G,
this was the problem i'm facing, please help me in this,
Thanks in advance
Windows Update never actually does anything, so i wouldn't worry about it
Even though it was no use, why we are getting that problem....?

HTC P3300 (How to upgrade from WM6 to WM6.5)

Hello,
Firstly, I must say that I previously posted this thread on a wrong forum.
I am relatively new in this forum and also new in flashing a new ROM. I have a HTC p3300 with original WM6 which I bought some years back. So my PDA is open (not given by a telephone company).
Relevant Information
ROM Version: 3.13.405.1 WWE
ROM DATE: 8/28/07
Radio Version: 02.94.90
Protocol Version: 4.1.13.44
ExtROM Version: 3.13.405.102
I have tried to read how to upgrade from WM6 to WM6.5 or any other good ROM, but the more I read the more I get confused.
Please can someone give me a useful guideline on;
Where to get a WM6.5 or any other good, light and tested ROM (English Version)
How to flash a new ROM
I will be very grateful for any useful advice.
Thanks,
Jonat
jonat said:
Hello,
Firstly, I must say that I previously posted this thread on a wrong forum.
I am relatively new in this forum and also new in flashing a new ROM. I have a HTC p3300 with original WM6 which I bought some years back. So my PDA is open (not given by a telephone company).
Relevant Information
ROM Version: 3.13.405.1 WWE
ROM DATE: 8/28/07
Radio Version: 02.94.90
Protocol Version: 4.1.13.44
ExtROM Version: 3.13.405.102
I have tried to read how to upgrade from WM6 to WM6.5 or any other good ROM, but the more I read the more I get confused.
Please can someone give me a useful guideline on;
Where to get a WM6.5 or any other good, light and tested ROM (English Version)
How to flash a new ROM
I will be very grateful for any useful advice.
Thanks,
Jonat
Click to expand...
Click to collapse
Hi,
for the guide: link
can you try using the latest of Shady313, I haven't try it, but he is a good cook : link
Bye,
Silvio
tnw513 said:
Hi,
for the guide: link
can you try using the latest of Shady313, I haven't try it, but he is a good cook : link
Bye,
Silvio
Click to expand...
Click to collapse
Hello,
Thanks for your message. I tried to follow the procedure as stated in the USPL documentation but along the line, I got an error, " Error 260" No connection between my computer and my PDA. I got to the stage (interface) where I can flash a new version of USPL on my device then the error appeared. I had a good established connection between the two devices before the error appeared.
So, what can be the problem? I am using Windows Vista.
Regards,
Jonat
jonat said:
Hello,
Thanks for your message. I tried to follow the procedure as stated in the USPL documentation but along the line, I got an error, " Error 260" No connection between my computer and my PDA. I got to the stage (interface) where I can flash a new version of USPL on my device then the error appeared. I had a good established connection between the two devices before the error appeared.
So, what can be the problem? I am using Windows Vista.
Regards,
Jonat
Click to expand...
Click to collapse
the problem is probably Vista...
See that in that case: --> link
Bye,
Silvio

[HELP] bb connect on JasJam

hey guys
i found that bb connect can actully work on JasJam with no problem ,, but unfotionatly i couldn't find how to work and install the needed cabs and exe's
so please if you know how let me now step by step
more info about my JasJam
ROM version: DVH_V22
ROM DATE: 09/05/08
Radio v : 1.21.31.10
and i'm runing WiMo 6.1 pro

Categories

Resources