Hiya all,
Firstly thanks to all you guys who have spent so much time and energy on developing these great tools and apps.
I have a problem.! Updated my XDA to PPC2003 from Yorch's kitchen; fine for 2 or 3 days and then it started doing soft resets and things of its own accord.
Anyone else had the same problem; and more importantly, anyone know how I can get round the problem. I'm now back on the old rom but liked the tools that 2003 had with it. Especially the phone bits, individual ring tones etc.
Somebody please help me. I have had a good look round the forums for info but everyone seems to be either obsessed with the XDA2 (aint we all.!) or the Tmobile rom update.
Thanks in advance for your help
Cheers :?
PPC2003 Config
Radio stack version 4.21.00
Rom Version 4.00.05
Original Config (which I am back to now)
Radio stack version 4.21.00
Rom Version 3.17.03 Eng
What version and radio
Which version of ppc2003 did you cook?
I have had great experience w/4.0.16 and radio 6.24.00 TMO
The first time I loaded I had some problems but I had forgotten to do a hard reset. The really small hole on the lower right by the head phone socket. I reloaded the new rom did a soft reset then a hard and Bob's your uncle it worked great.
Hope this helps. I doubt anyone can help significantly until you specify rom and radio version
As you can see, I have a real old version of Rom and Radio Stack!
Where can I get the new PPC2003 in combination with a new RadioStack?
Where did you get it from?
THX
www.yorch.net
That should get you what you need :wink:
Related
hi xda worldwide people,
i have updated my o2 xda with a Rom version 4.00.01 ENG and Radio Version 4.21.00, everything seemed to be working fine (finally i can even see the number of word i write in a sms...yahooo!!), BUT after a while of perfect functionning (to good to stay good...) I noticed that now i cannot acced anymore to the phone of the device. I cannot make any call!! :shock:
tried with a soft and full reset but dosent get any better..
:?:
help
I would try an upgrade to 4.00.11, and it that doesn't help you it's probably not the ROM but something wrong with the phone. You didn't mess with your Radio Stack did you?
...ops! tricky one!i hope not.is there any way that i can find out if there is anything wrong with my radio stack? by the way is there also an ftp or web address where i can download the upgrade you say?
This info forum is great!!
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Re: Which is a recent / suitable ROM and Radio upgrade for Q
faisal said:
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Click to expand...
Click to collapse
You may use any ROM Updgrade, you may even want to cook your own ROM, but please do not think of performing a radio stack upgrade if your present radio is working well and giving you a trouble free service.
Hi guys,
I 'm in same situation but with higher versions, and can hardly wait to get a new 2003 ROM.
I can't just play with my XDA as I use it all the time for work and it's pretty stable so far. I just also can't tell that the ROM is 'totally' separate from the RUU in WM2003.
So the question is: is there any one here who has gone through a 2003 upgrade for Qtek 1010 to tell us his thoughts after the upgrade ?
I read a lot about the stability of 4.00.16 ENG, but all been written was for O2 R4.21 or T-Mobile R6.xx. Did any one in this region (Mid East) with R 3.2x went into this upgrade ? and what is the current status ?
Thanx all ....
Latest ...
I tried upgrading to 4.00.11 ENG from the kitchen ... no matter how many trys it just restarts and gives the same error message "Can't open USB/com port ..." ...
Do I miss anything ??
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Biso007 said:
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Click to expand...
Click to collapse
Hi Biso007,
Look at the IDIOTS GUIDE at:
http://www.xda-developers.com/forum/viewtopic.php?t=3171
and follow the instructions thoroughly one by one and you can't go wrong, it did work for me, I was in the same situation.
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Well i am using WM2003 4.00.11 and its working fine for me no problem i cooked in the kitchen you just need to read arround this great forum for a whgile on topics such as upgrades and ROM to know exactly what you are dealing with and then you will able to upgrade smoothly.
:wink:
Hi ARZLEB
I read lots and lots about upgrade lessons but none of them worked for me .... I got an advice to use SD card with bootloader as it's the only working way. Now I wonder why the EXE method was created!!
I see that u got the 4.00.11 working. Did u upgrade it using EXE or SD card. Any help would be so appreciated ... thnx
Well i used the EXE methode the file i cooked in the Kitchen but i didnt change the version i left as 3 at the bottom of the page it works fine i upgraded from 3.XX to 4.XX then i downgraded from 4.00.11 to 4.00.05 then upgraded again all using EXE format so far working great.
i will be honest with you i know about the SD methode very well but never tried it so u have to make more search on this issue.
If you need anything more plz message me anytime and i will be more then whilling to help you step by step...
faisal said:
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Click to expand...
Click to collapse
Faisal sorry for very late reply.
I have flashed my Qtek (bought in Abu Dhabi) with several versions of roms cooked in kitchens (Jeff's and Stefans's), but I have finally settled with ATT release wm2003 Siemens SX56 upgrade. It comes with most of the bugs fixed (except multiple reset bug) and is quite stable. I almost never have to reset it. You can flash the ROM only by SD card method though. You can try it. It's always a good idea to flash using SD card method. USB method using ProgramA is not very safe. I guess the network in Pakistan is compatible with the one in the UAE, so you can safely use it, if you don't mess up with the Radio Stack. My Radio is 3.23.01 and I have no problems with that.
i have just put my sim card in but the OS is
ROM version 3.14.17 ENG
ROM date 10/11/02
Radio verison 4.16
Protocol Version 32554
are there any upgrades or programs i should add or is it fine as it is?
any suggestions would be greatly appreciated :wink:
I would suggest leaving the radio stack alone if it works ok. You can backup your current rom to sd card then go cook a rom with lots of extra features and software in the unused rom space at one of the kitchens.
Hi ... congratulations first
Your ROM is PPC2002, so you may consider upgrading to WM2003 (it's not essential tho :wink: ).
In all cases, if your Radio is working fine (the phone part), just do NOT touch it!!
Take enough time to read in this forum before any steps or questions ... Good luck
O2 XDA and WM2003
I just saw posts on this thread, is it possible (safe?) to put WM2003 on an O2 XDA. What ROM upgrade should be used? I ask because I got impression that 2003 upgrade was vendor sensitive and you had to use (if they did one) your vendors upgrade. (i.e. Siemens, etc). Thanks for help, maybe I get to update after all !!
Alan
Have been to the kitchen and done some cooking the last night.
Facts:Using SD card for all upgrades
Never cook anything but the Base ROM itself (e.g. no extras)
The upgrade works perfect every time, meaning it ends successfully so that I can do a cold boot to start the "new" ROM image.
ROM version org: 3.16
Current ROM: 3.20.06 ENG
Radio version: 3.19.01
Protocol version: 32S54
Model No: PW10A1
RAM: 32MB
Flash size: 32MB
SD Card size: 64MB
I have been able to switch back and forth between different 2002 ROM's
but every time I upgrade to 2003 ROM the unit hangs on the introductions screen. I see the splash for instans 4.01.19: s "Welcome to T-Mobile"
In the bottom right corner I can see the Protocol version, ROM version and Radio version numbers. BUT there it is and it does not respond to any buttons or even magic words like pretty please with suger on top.
I have tried the following versions:
4.00.33 GER, 4.01.00 ENG, 4.01.16 ENG and A.30.09 ENG
I have no problem getting back to a working unit with almost any 2002 ROM but hey I wanna try it out with a 2003 ROM.
Any ideas anyone? I have been looking around quit a bit but cant see that anyone posted something that helps me out here.
Thanks to everyone who contributes to this great forum!
Jonas
###
not sure but maybe the 32MB ram is too little for 2003
these devices are pretty rare i think
maybe you should try doing a search for people with 32MB devices
and their exp with 2003 ?
Rudegar said:
not sure but maybe the 32MB ram is too little for 2003
these devices are pretty rare i think
maybe you should try doing a search for people with 32MB devices
and their exp with 2003 ?
Click to expand...
Click to collapse
The 32 MB shouldn't be the problem. Using myself a device with only 32 MB without any problems with WM2003 .....
Maybe it's a problem with the Radio Stack...
Nearly all the providers of a WM2003 Release included a Radio Stack Update. Myself i've tested it with the 4.21 and the 3.23. Maybe yours 3.19. is just too old.....
Stefan
Ok, here we go again,
found the Radio Stack Upgrade from O2 uk (V421)
and upgraded witout problem to this one.
No I tried to upgrade with 2003 ROM 4.01.16 ENG but still same thing.
It hangs on boot screen even though it now in the lower right corner says:
G32S54
R4.21.00
4.01.16
I will try to load ROM A.30.09 ENG now.
I let you know how it goes.
/Jonas
Still no luck
Ok I have now tried will all known 2003 ROMs from the kitchen with the same sad result. (hang on boot screen as before)
I now downloaded the official O2 uk release of upgrade for XDAII (Xda_II_Upgrade_v16050.exe) when I unpack this one I find the following files that might be useful ms_.nbf, NK.nbf, Radio_.nbf.
When I try to write the NK.nbf to my SD card XDATools tells me that it does not recognize the file format.
I think I have seen something about this error but I cant find it now.
Im not even sure if this ROM will work. I can not see that this ROM is uploaded in the kitchen either but perhaps it will be?
So Im still stuck so any tips would be great and I keep testing new ways ahead.
/Jonas
hi. as LumpiStefan commended, you need to upgrade the latest radio stack. I think the radio stack 6.24 will work for you. check my posted for the radio stack.
Secondly, the radio stack will work it its specific OS rom image. for example, the radio stack for Tmoble , must match the Tmobile OS. you can not use radio stack built for O2 for Tmobile OS.
Therefore, try to upgrade with matching OS and its Radio Stack. I tried one night with all OS from Tmobile, ATT and OS to come with these solutions.
hoanghon said:
you need to upgrade the latest radio stack. I think the radio stack 6.24 will work for you. check my posted for the radio stack.
Click to expand...
Click to collapse
That´s wrong. 6.24 is for PW10B Models with 900/1900 MHz GSM. Do not use it on your device
hoanghon said:
Secondly, the radio stack will work it its specific OS rom image. for example, the radio stack for Tmoble , must match the Tmobile OS. you can not use radio stack built for O2 for Tmobile OS.
Click to expand...
Click to collapse
That´s wrong too. Already used some T-Mobile ROMS with O2 Radiostack....
Stefan
hi LumpiStefan,
Okay. I am wrong. this radio stack use in USA.
Also, I don't know but I had tried to swap the radio stack O2 to run on Tmobile or ATT, the radio stack never turn On.
Also can you help me to have a radio stack version 4.20 or lower. ther repair.zip contain version 4.21. Thanks for correcting me.
:? PLEASE HELP!!!
I've got an XDAI
ROM version: 4.01.12 ENG
ROM date: 12/22/03
Radio version: 6.1800
Protocol version: 324e4
Model no.: PW10A1
The ROM was cooked in Stefan's great ROM kitchens.
Whenever my XDA loses the GSM signal it turns itself on.
It will turn itself off again after 2 minutes-as it is set to do.
I don't know when this probelms started but it hasn't always done this.
It is maddening, especially when I am driving.
It also wears the battery down quickly.
Could it be my radio stack?
What is the best or most reccommended for XDA1?
i think it's the rom, its a little bug some 2003 t-mobile roms have
Try to use the AT&T ROM
it has very few bugs, but some problems in sound!
Revert back
I suggest you put the latest Pocket PC 2002 ROM back in.
I have been through the same with my own XDA 1. Tried every unofficial and coocked WM2003 ROM there is. Nothing but issues and an utter waste of my time. Now I am back at PPC2002 3.20.06, AFAIK the most recent PPC2002 version. Workes like a charm. Even -very demanding- TomTom3 runs smoothly on PPC2002 on my XDA 1.
WM2003 on an old XDA 1 does not bring any fascinating additional functionality. The XDA 1 does not become faster, does not use less memory for the OS so more for apps, no great extra apps, battery does not last longer with WM2003, graphics don't become speedier. No gains in there whatsoever, not for me anyway. Only issues unfortunately.
And all my non-MS apps well run on PPC2002. So why make the switch :?:
Thanks for all the replies.
You guys are great help.
Silicon
The Rom you mentioned 3.20.06 is an english language version of an asian ROM. Isn't it?
Will this work well in the USA (where I am)?
Also will it work well with T-Mobile?
Or should I use a ROM like 3.14.40?
Is there any need to change the radio stack?