Alright I have an HD2 Tmous,
My stock Rom was ver 2.13
I put Ver 2.07
HSPL will not install it gives me a Invalid SPL error
What do I need to do, The n00b page for this doesn't explain this problem
Also My radio in my car has bluetooth built in,
So I paired my phone up with it to stream my music off it,
it has 2 connections on my radio, phone connection and media connection
Once paired for the first time both are connected Media and phone.
Once car is turned off and back on it only connects to the phone
So I have to re pair the devices to get the media to connect
PLZ HELP!
thats because all the noob pages say you need 2.08, not 2.07
find rom 2.10.0 in 'test and stock roms' thread in tmous section, flash that, it 'should' change your spl to 2.08.0000 then you can use hspl1024
Thanks, do you know anything about the Bluetooth problem?
no, sorry, i only use basic bt functions, and they all work fine, so it's not a strong suit of mine.
Cinabnett said:
Thanks, do you know anything about the Bluetooth problem?
Click to expand...
Click to collapse
Sounds like a bug in the BT stack in the stereo TBH. I've seen this before with some in car GPS units and the fix is to update it's firmware. If the stereo is the stock one for the car have a word with the local dealer and if it's a thrid party one have a look and the manufacturers website.
Cool! Thanks got it flash with 2.08 HSPL
There is an option under the bluetooth settings to connect both handsfree and audio at the same time, not sure right where it is at, had to do it for my stereo headset ..
If this is not checked it will default to the Handsfree only untill media is requested via hardware buttons, that is how it behaves on my headset, should be close to the same for the car stereo ...
Related
I have upgraded to the new O2 Rom 169 and all seemed ok, until I started to install my bluetooth head set.
Since I upgraded my radio ROM to 1.03 I have lost the connections to my headset.
Prior to the upgrade it worked perfectly, now the recieve functions just will not work.
I have down graded to the radio 1.00 ROM but the same thing is happening. So the upgrade seems to have corrupted something more important.
Can anyone help here?
Downgrade to previous ROM
I have now downgraded to the previous ROM 1.11.162WWE, and that seems to have solved the problem.
I have installed the Radio ROM update and that seems to work OK now, so I will stick to this for the moment, unless someone has any better ideas!
Hello,
I had the same problem. It seems, the old bluetooth software won't work with the new radio rom. I tried my bluetooth connection before restoring my old stuff from backup, and it's ok. I didn't have any serious things in my backup, so I reinstalled my software from install cd's - sorry, I had no time to figure out, wich software causes this issue, but hope this information will help you.
Z.
i also having problem with my bluetooth but I cant say the problem is from new radio ROM or others because i dont know the real cause. A message display and wrote
"Sorry! Bluetooth can no longer be used because the licence is expired"
"BDA ff:ff:ff:ff:ff:ff: Key:E3E534E19B3E8214C543A73C0A8B9A9074DD3B1753515CD8"
after that, bluetooth will off automatically.
I have found since the upgrade to the new radio, thanks PUG.
That my Handsfree and Headset Bluetooth issues have lessened.
A few little glitches but will be on the outlook for another patch or upgrade in the future :roll:
Hmm,
I have radio 1.00.00 version with t he original Asia ROM and something funny has happened:
Since the beginning, I successfully connected to Logitech and Hello II BlueT headsets + a generic car BT handsfree.
I had to perform a hard reset after one of my progs messed the registry and reinstall everything (less the troublesome prog <g>).
Since then, the BlueT handsfree does not work properly: I hear the ring but there is no volume control from the headset and I hear nothing + mike does not work. The rest of the BT conections work flawlessly, except for some rare disconnects from my BlueT RBT-2001 GPS.
The story in this thread is not encouraging but one thing is clear - the BT problems that I have are with the original radio and EROM and not after an upgrade. I have no clue what all this means except for the fact that tere is something quite problematic w/ the Xda IIi BT connectivity that I didn't have w/ any of my previous PDAs.
I thought to u/g the radio version only but decided to go for a full u/g (less the O2 stuff), hoping that my BT problems will go away.
Please correct me if I'm wrong - should I go ahead with the PUG O2-less upgrade or should I keep the old (but clearly buggy) versions?
Maybe all the problems that we have are connected to specific manufacturing HTC batches? Has anyone researched this? Is there any info correlating between problems and Xda IIi serial numbers?
Best regrads,
Al
Has anyone had any problems pairing their X1 with any Nissan or Inifniti cars? There seem to be some mumblings on the web about their cars and WM6 devices and I've had no luck getting it to work on my '08 G35. Thanks.
bluetooth pairing
i just checked the aproved phone list for your g35 and the x1 is not aproved by infiniti. only certain phones will link to our cars others will not
I have an 08 G35 and have no prob. pairing it with my car. How are you pairing this up with the car?
it also depend if you both have navagation or not
elee888 said:
I have an 08 G35 and have no prob. pairing it with my car. How are you pairing this up with the car?
Click to expand...
Click to collapse
I don't have the navigation so I just click the phone button, tell it I want to pair a new device, and have my X1 start searching. At least now I know it can be done. Thanks for the reply
Well... I do have the navigation. So maybe the pairing process is a little different. But it should work though, it even allows me to download the whole phonebook into the car. Something my other phones in the past did not allow me.
baashha said:
Managed to solve this now.
Of course both Merc & SE didn't have any good solutions.... so had to continue googling & XDA-ing... This is what I did:
i.) Jetware, as I posted earlier has been removed.
ii.) I still had the SAP Profile addition downloaded from one of the forums in XDA on.
iii.) Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys\COD
the default is 5898764 (Decimal) which is "Telephone (Smartphone)" which you would think would work. Changed to 5374476 (Decimal) which is a normal phone.
iv.) Restarted the phone.
v.) Started the pairing process from the car - failed as per before.
vi.) Started the pairing from the phone, and they work!!
Now, they pair automatically as how they would before....
Ram
Click to expand...
Click to collapse
this is how i got mine working with my pioneer deck.
here's the link to the SAP Profile he was talking about.
http://forum.xda-developers.com/showpost.php?p=997872&postcount=166
hope this works for you.
which PIoneer do you have?
I have the DEH-P5900IB and a BT adapter, and i can't get my X1 connect.
All my previous phones worked fine.
it looks like the X1 won't let me pair without passcode, and the radio says Error.
Do you mind explaining exactly how you did it?
Thanks
i have the DEH-790BT.
what i did was after i changed what i mentioned above, then i set my deck to be able to be noticed by other bluetooth devices, then added it through my X1. After I added it through my phone it said successfully connected on my deck and the phone displayed it connected as wireless stereo and hands free. now the only weird thing was it was trying to connect as both the wireless stereo and hands free which seemed to mess with the deck, so I had to turn off my ignition and turn my car back on for it to actually recognize the connection fully. oh and the passcode if you connect through the deck to phone like I did it should be default '0000' but i would check your manual just to be safe, and if your connecting through your phone to the deck (which i haven't tested so I don't know if it works) you can pick your own passcode, which i suggest just making 0000 or nothing.
I have a problem also with my HTC Touch HD (Blackstone)
I can pair with my Nissan Qashqai carkit but soun dis very bad, and the caller on the otherside doesn;t hear anything.
Strangly, but try, when during a call i switch from carkit to phone and back (using the options in my carkit/buttons on stearing wheel) everything is fine!
Checking the internet learned me that this is related to the bluetooth stack (or settings) in WM6.1 (and 6.5 also)
So does anybody have any idea how to solve this, maybe by registry changes or maybe by even "downgrading" the Bluetoorh stack to 6.0 or maybe even 5.x.
Maybe it is also possible to replace the complete MS stack for an other stack?
came to me an idea to connect the music player in the phone to the FM radio in the car to play it ! I'm very positive for it .. since getting TMC from the radio to the gps software (in this thread) , so there is a possbile connection between them ? the question, could someone came with a software or hacking can do this ? with no need to buy external FM CAR KIT device to make it works !
I hope yes ...
Thanks ....
im also looking for such an app..
i had also put down the same question here
Hi, i think you don't really understand whats meant by RDS/TMC through radio. It doesn't get information from your car-radio, it's a build-in radio device within your phone. And this is even a receiver, not a sender. As far as i conern there are onky three ways to connect your phone to your car-radio and all of them are the way 'music from phone to radio'
1.) bluetooth, but only a few radios have got it
2.) via fm-transmitter which is a way whichmostly shold work
3.) vie line in at car radio and line-out/speaker-out/headphone at phone
regards
Bernhard
Bernhard12345 said:
Hi, i think you don't really understand whats meant by RDS/TMC through radio. It doesn't get information from your car-radio, it's a build-in radio device within your phone. And this is even a receiver, not a sender. As far as i conern there are onky three ways to connect your phone to your car-radio and all of them are the way 'music from phone to radio'
1.) bluetooth, but only a few radios have got it
2.) via fm-transmitter which is a way whichmostly shold work
3.) vie line in at car radio and line-out/speaker-out/headphone at phone
regards
Bernhard
Click to expand...
Click to collapse
right AFAIK there is no HTC device that can send FM out, just receive. :/
Thanks guys for disappointed me ... idon't really why i'm still positive for making this app maybe it could happend later ..thanks
Bernhard12345 said:
Hi, i think you don't really understand whats meant by RDS/TMC through radio. It doesn't get information from your car-radio, it's a build-in radio device within your phone. And this is even a receiver, not a sender. As far as i conern there are onky three ways to connect your phone to your car-radio and all of them are the way 'music from phone to radio'
1.) bluetooth, but only a few radios have got it
2.) via fm-transmitter which is a way whichmostly shold work
3.) vie line in at car radio and line-out/speaker-out/headphone at phone
regards
Bernhard
Click to expand...
Click to collapse
2.) HOW CAN U CONNECT "via fm- transmitter "? ?
Hi imrock,
ask google for it or even ebay. ;-)
1. buy fm-transmitter
2. plug in fm-transmitter to device instead of headphones
3. search for the frequency on which your transmitter transmits at your car radio
4. enjoy
I don't have experiences on my own, but a few weeks ago i've seen a test in a magazin. They summorized as follows: The quality of music is not really good.
Bernhard12345 said:
Hi imrock,
ask google for it or even ebay. ;-)
1. buy fm-transmitter
2. plug in fm-transmitter to device instead of headphones
3. search for the frequency on which your transmitter transmits at your car radio
4. enjoy
I don't have experiences on my own, but a few weeks ago i've seen a test in a magazin. They summorized as follows: The quality of music is not really good.
Click to expand...
Click to collapse
hey Bernhard
thanks for the info..i was looking for this only but it isn't of any use if you have to use an attachment, not to mention the quality..!!
But will definitely check tht out
Th HD2 is my 4th WM phone on all my previous WM Phones I ran a mortscript which I wrote to transfer all the system sounds over to my bluetooth car kit when it detected the kit...the script looked for the change in a registry key:-
> HKLM\System\State\Hardware\Handsfree
and then activated the BTAudioOn program...
Now this just does not work on the HD2! neither the registry change nor the Audio transfer - the sound still comes out of the phone speaker!!
I have read that a different Bluetooth stack is used on the HD2 (Widcomm)..
So does anyone know:-
1] Which registry key changes when a handsfree kit is detected?
2] A program that will transfer the sound to the Bluetooth device on the HD2?
Thanks...
Which ROM are you running ? On my NRG ROM which is a 1.66 based one i have the option in the BT settings under advanced to play system sounds on remote hands free device .
Comm Manager -> BT -> Settings -> Advanced -> Audio
Never checked on a pre 1.66 ROM if this option existed ..
I have a stock O2 version with 1.43 ROM, yes I found that option and turned it on but it doesn't work! I read somewhere that it only works for stereo devices? But def not working on mine :-(
anyone???????????????
dino_Donis said:
anyone???????????????
Click to expand...
Click to collapse
Works fine for me on my Jawbone 2 BT headset .. I can listen to music over it no probs (albeit poor quality) .. Maybe upgrade to a 1.66 rom and see how you go with that..
Is it safe to upgrade a stock O2 HD2 to this version? What else will I gain? Is sense much different?
Can someone confirm that this Bluetooth issue will be fixed if I upgrade my ROM to 1.66 WWE. I have an o2 phone which currently has 1.43 on it.
When the phone rings the sounds gets re-directed to my Plantronics M3000 headset/Nokia CK-7W car kit fine...but the Play all system Sounds through Bluetooth device feature doesn't work...I can hear extra hiss through the bluetooth device like it is switching on but the sound still comes out of the phone speaker....
Hello buddies,
this thread is about some strange behavior of bluetooth with current energy roms. details follow...
why a new thread?
I decided to start a new thread, because it leads to nothing to discussing this topic in the main thread ... found some people who shares my sorrow, never the less there was a lot of users who hit the answer button on page 1 and report "problem xy" or "hell yeah what a nice rom"
what is the problem?
I'm not able to pair my TouchHD with my car's Hands Free system. A2DP works fine, but when I turn on the Radio Unit a small blue headphone symbol blinks in the statusbar of the phone - no pairing succeeds. If I switch to BT audio, a black headphone symbol stays resident and the media player opens for playback, so A2DP works. Installing SIM access profile on roms without built in rSAP or other various tools in addition doesn't make it work. [see "what have been done" section!]
Just used the latest MIRI-Roms (discontinued) and it works like a charm for me. After initial setup, Hands Free (version 1.5) and Wireless Stereo where installed and activated - Serial Port left out unchecked. Then a popup message informs me, that a BT-Device is trying to access phones phonebook remotly - all went fine.
as reported by other users, this behavior occurs since ~may versions of energy roms...
about the environment
Using energy's rom on TouchHD [Blackstone] T8282 [BLAC100 32M]
flashing with USPL
phone's SPL: stock SPL-1.54.0000
radio: 1.12.25.16D3 - don't see a reason to update
protocoll: 52.60.25.33U
carrier: O2 GERMAN
what have been done so far?
I've tested the pairing of my device in various cars
tested with my Renault Megane 3 integrated car kit (arkamys audio / parrot)
tested with a 2010 Toyota Prius car kit
tested with a subaru 2010 car kit
tested with Blaupunkt Toronto 400 BT head unit by phitsc
I've tried programs, suggested by the xda community
installed Bluetooth_SAP_Profile.CAB
installed BT_SAP.cab
installed Gooru_Sense_BT_A2DP_Fix_Cab_by_JVH3.CAB
installed HeadsetFix.cab
installed JetBTHFExt_1.40.CAB
reg-tweaks on "HKLM\Software\Microsoft\Obex\ObexServiceMask"
roms tried
Miri_WM65_21891_Premium_Manila_2.5_V20.0_NoHtcMessaging.rar
Miri_WM65_21893_Premium_Manila_2.5_REV22.0.rar
Energy.BLACKSTONE.23563.Sense2.5.Cookie.HomeTab.Apr.23.7z
Energy.BLACKSTONE.23566.Sense2.5.Cookie.HomeTab.May.01.7z
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.16.7z
Energy.BLACKSTONE.21903.Sense2.5.Cookie.May.16.7z
HD_Miri_6.5.X_23541_SENSE25.rar
Miri_WM65_21893_V38.0_Premium.rar
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.22.7z
(green indicates a working rom)
dear community...
please use this thread wisely for recommendations or suggestions on this topic. keep this thread a productive discussion. if you have a contact to NRGZ, feel free to report this thread, cause my afford to reach him fails.
So I hope we can figure out, why it does'nt work as it should to...
kindly regards, FS
Hi,
I have the same problem with my Touch Pro and my Megane 3.
I have to switch back to an older version of the rom then..
Hi,
I'm using Energy ROM Titanium 18may.
Radio 1.17.xxxx
No problem here with BT of my car stereo.
I had this problem untill I delete the old pairing on the car BT.
After this, the phone pair great
firespawn said:
Hello buddies,
this thread is about some strange behavior of bluetooth with current energy roms. details follow...
why a new thread?
I decided to start a new thread, because it leads to nothing to discussing this topic in the main thread ... found some people who shares my sorrow, never the less there was a lot of users who hit the answer button on page 1 and report "problem xy" or "hell yeah what a nice rom"
what is the problem?
I'm not able to pair my TouchHD with my car's Hands Free system. A2DP works fine, but when I turn on the Radio Unit a small blue headphone symbol blinks in the statusbar of the phone - no pairing succeeds. If I switch to BT audio, a black headphone symbol stays resident and the media player opens for playback, so A2DP works. Installing SIM access profile on roms without built in rSAP or other various tools in addition doesn't make it work. [see "what have been done" section!]
Just used the latest MIRI-Roms (discontinued) and it works like a charm for me. After initial setup, Hands Free (version 1.5) and Wireless Stereo where installed and activated - Serial Port left out unchecked. Then a popup message informs me, that a BT-Device is trying to access phones phonebook remotly - all went fine.
as reported by other users, this behavior occurs since ~may versions of energy roms...
about the environment
Using energy's rom on TouchHD [Blackstone] T8282 [BLAC100 32M]
flashing with USPL
phone's SPL: stock SPL-1.54.0000
radio: 1.12.25.16D3 - don't see a reason to update
protocoll: 52.60.25.33U
carrier: O2 GERMAN
what have been done so far?
I've tested the pairing of my device in various cars
tested with my Renault Megane 3 integrated car kit (arkamys audio / parrot)
tested with a 2010 Toyota Prius car kit
tested with a subaru 2010 car kit
tested with Blaupunkt Toronto 400 BT head unit by phitsc
I've tried programs, suggested by the xda community
installed Bluetooth_SAP_Profile.CAB
installed BT_SAP.cab
installed Gooru_Sense_BT_A2DP_Fix_Cab_by_JVH3.CAB
installed HeadsetFix.cab
installed JetBTHFExt_1.40.CAB
reg-tweaks on "HKLM\Software\Microsoft\Obex\ObexServiceMask"
roms tried
Miri_WM65_21891_Premium_Manila_2.5_V20.0_NoHtcMessaging.rar
Miri_WM65_21893_Premium_Manila_2.5_REV22.0.rar
Energy.BLACKSTONE.23563.Sense2.5.Cookie.HomeTab.Apr.23.7z
Energy.BLACKSTONE.23566.Sense2.5.Cookie.HomeTab.May.01.7z
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.16.7z
Energy.BLACKSTONE.21903.Sense2.5.Cookie.May.16.7z
HD_Miri_6.5.X_23541_SENSE25.rar
Miri_WM65_21893_V38.0_Premium.rar
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.22.7z
(green indicates a working rom)
dear community...
please use this thread wisely for recommendations or suggestions on this topic. keep this thread a productive discussion. if you have a contact to NRGZ, feel free to report this thread, cause my afford to reach him fails.
So I hope we can figure out, why it does'nt work as it should to...
kindly regards, FS
Click to expand...
Click to collapse
Mine works fine without any cab fix.. your pda must search 4 a car kit as a bleutotth headset! comm manager /bluetooth/ set up BT headset turn your cars BT on and there you go!! i tell yo the energy roms work fine 4 me
+ 1 here
Don-Maco said:
Mine works fine without any cab fix.. your pda must search 4 a car kit as a bleutotth headset! comm manager /bluetooth/ set up BT headset turn your cars BT on and there you go!! i tell yo the energy roms work fine 4 me
Click to expand...
Click to collapse
sorry dude, not much help but i have the same experience; all energy roms (and i do mean all of them) work perfectly with my parot CK3100 but then i do task 29 before every flash & hard reset a few times after initial setup.
in addition, i also flash the latest stock rom from htc every so often.
i know this seems a bit ott but i rarely seem to suffer the buggy issues that many others do.
hope you get it sorted
It is not about Task 29.
I had problems with access through the original multi-functional touch panel in the Ford Mondeo. When I went to CLEAN ROM, all troubles are gone. The problem is that you must agree with access on the phone. This question is not on Energy ROMs displayed. I can pair phone but can not be used for handsfree calling.
Now I have a CLEAN ROM and everything is bugfree.
To be honest, no ROM to date consistently works with the in-car bluetooth kit in our Zafira. It works flawlessly with my old phone (K800i) and my wife's phone (W950i) but it's just not stable for the HD.
If it works, it'll drop the bluetooth connection after about 15mins. It's as if there is a time-out, but I've hunted the registry and both HD Tweak and Adv. Config for anything related to this but with no joy.
My current ROM seems to be about the best so far (kwbr's WM6.5 and Manila 2.1) but it still drops the connection randomly yet other times it may keep the connection for over an hour no problems.
Seems very very strange to me, but from what I've read, it's a common issue with the bluetooth kits in GM's euro cars (Vauxhall, Saab, Chevrolet etc.)
|WWE|BLACKSTONE|¯`·.¸¸.- Energy -.¸¸.·´¯ |BlueTooth CarKit ISSUE|`·.¸¸.·´¯`·.¸¸.·´¯)
@DaRulah
what kind of rilphone / radio rom do you use - pointing my research in this direction, may that's the reason... does bluetooth depends on the used radio rom?
@raistlin74 / @Don-Maco
tried all ways possible
car to phone
htc comm mgr to car
windows BT settings to car
@superseagull
having the latest carrier rom flashed before (comes with SPL 1.54 to enable flashing of 6.5+ roms)
what kind of rilphone / radio rom do you use? [EDIT: saw it in your signature ]
@malson
well, sounds logic ... the pairing won't succeed cause the phone's dialog to allow access doesn't appear. will try it with energy's titanium rom. never the less, the outdated MIRI roms /w sense 2.5 and windows mobile 6.5 works for me
@jonifen
as mentioned, the phone is compatible with my car - in basic. simply doesn't work with energy roms.
therefore I tried it with various other systems to exclude a mismatch with my car kit
well, thanks for you participation so far - may we get the clue with my problem
regards - FS
2 options?
Why only two options yes and yes? Why not a no option in the poll? I don't have a problem with nrg roms.
firespawn said:
@DaRulah
what kind of rilphone / radio rom do you use - pointing my research in this direction, may that's the reason... does bluetooth depends on the used radio rom?
Click to expand...
Click to collapse
Radio: 1.14.25.35 with the matching rilphone
Rom: Energy.RAPHAEL.23569.Sense2.5.GTX.Themed.May.13
i don't think it's a radio problem since i used that one with older energy roms, and had no problems with my car kit.
no problems here
I tried my phone with a bluetooth carkit in a BMW X5 and found no problems with it. I use latest NRG rom 21905 with CHT and latest Radio (1.17) with Rilphone 1.15. i suggest u upgrade to those as well.
GL
As this is about a genaral pairing problem I don't know if it will help u as u seem to be able to pair but just have Handsfree problems...
But as u didn't mention how u tested out the fixes I will post this here.
Remember i had a problem once when trying to pair my HD.
Base:
- Touch HD with some newer Sense 2.5
- A2DP wasn't working or Windows Mediaplayer hooked A2DP keys
AFTER I tried to fix A2DP problem (installed some "fix" cabs u mentioned above) I wasn't able to pair anymore.
Here is what i figured out:
- To get it working again it didn't help to over-install another fix - don't know why but seems that some fixes do reg changes wich break other ones.
- I had to hard reset the device
- so never try to install 1 fix after another to figure it out
- always do 1 hardreset + 1 fix then hardreset again
- only really good working fix for me was HeadsetFix.cab I posted in NRG thread - many other fixes broke my pairing capability
Now im on:
- actual NRG 2. June MaxSense 23xxx
- HeadsetFix.cab installed (otherwise Windows Mediaplayer pops up or it doesn't work for me)
- haven't had problem with pairing since several month with any NRG Rom (before it wasn't depending on NRG but on Sense 2.5 / but just had A2DP issue - pairing issue just with wrong fixes installed)
Radios I tested were .12 and .14
Tested BT Headsets/Caraudios:
- Motorola HT820
- some Sony MEX BT xxxx Caraudio
BTW for all who are interested in - i always install "AutoA2DP" or "AutoActiveSync" cause A2DP doesn't pair automaticaly in my car - just the Handsfree pairs by default.
Mimic NRG style ROM Thread !!!!!!!!!!!!
eddyve said:
Why only two options yes and yes? Why not a no option in the poll? I don't have a problem with nrg roms.
Click to expand...
Click to collapse
Yes + 1
Why only YES and YES option ...
No problems with any BT. Myy HD conects on any BT device that i have with no problems...
*****************************************************
PS: its not nice to use for your thread title the same format and characters that NRG use for all of his roms !!!!!!!!!!!!
Its a bit confusing for regular users and misleading....
And if i was you i will change the title not to mimic NRG ROM threads !!!!!!!!!!!!!!!!!!!!!!!!!!!!
colossus
|WWE|BLACKSTONE|¯`·.¸¸.- Energy -.¸¸.·´¯ |BlueTooth CarKit ISSUE|`·.¸¸.·´¯`·.¸¸.·´¯)
@eddyve
it is a yes poll (or call it simply a counter), because I want to know how many people have a problem like me
@DaRulah
well, good to know
@TheOne741
updating my radio rom asap, just to confirm that the radio version is not the source of my problem ... I will report on this
@FrEcP
thank you very much for your detailed explaination! I also do hard resets between the fixes. I will try HeadsetFix.cab in combination with AutoA2DP on a clean rom
@colossus_r
do you have anything useful to contribute? stay on topic please!
Well, thank you all so far, I will report my progress when the mentioned tips have finished... regards - FS
mimic NRG ROM thread
firespawn said:
@colossus_r do you have anything useful to contribute? stay on topic please!
Click to expand...
Click to collapse
@firespawn: Whats the matter with you? colossus_r is on the right way. Why only "Yes or Yes" in poll. And whats about mimic NRG ROM threads?
Please choose your own style for this thread.
On topic: No problem with Siemens HKW 720 Bluetooth Car Kit at all. Im using Handsfree-Profile and rSAP-Profile.
Issues with bluetooth ...
aleskow said:
@firespawn: Whats the matter with you? colossus_r is on the right way. Why only "Yes or Yes" in poll. And whats about mimic NRG ROM threads?
Please choose your own style for this thread.
On topic: No problem with Siemens HKW 720 Bluetooth Car Kit at all. Im using Handsfree-Profile and rSAP-Profile.
Click to expand...
Click to collapse
Again, it is used as a counter aaand again: stay on topic and stop cryin' like a baby about the choosen subject! I couldn't change it anymore!!!
Please do not post things like: Oh boy, mine is working fine *smiley*, cause this is worth nothing!
Sorry, I'm a bit frustrated, because a productive research on this problem seems to be impossible...
superseagull said:
sorry dude, not much help but i have the same experience; all energy roms (and i do mean all of them) work perfectly with my parot CK3100 but then i do task 29 before every flash & hard reset a few times after initial setup.
in addition, i also flash the latest stock rom from htc every so often.
i know this seems a bit ott but i rarely seem to suffer the buggy issues that many others do.
hope you get it sorted
Click to expand...
Click to collapse
Right is right i also never had bugs since energy roms march 2010
and the opera 10 never gave issues! so some flashers are doing somthing wrong! when using titanium the rom is superbly fast i also spice things up with the htc-performance.cab.
firespawn said:
Again, it is used as a counter aaand again: stay on topic and stop cryin' like a baby about the choosen subject! I couldn't change it anymore!!!
Please do not post things like: Oh boy, mine is working fine *smiley*, cause this is worth nothing!
Sorry, I'm a bit frustrated, because a productive research on this problem seems to be impossible...
Click to expand...
Click to collapse
We cant do any research if we dont have the problem
i think you should swich the the car bluetooth on and keep it pressed till the device finds it! thats what i did on other cars
or you will have to reset the cars bluetooth as shown in the manual
firespawn said:
@eddyve
it is a yes poll (or call it simply a counter), because I want to know how many people have a problem like me
@DaRulah
well, good to know
@TheOne741
updating my radio rom asap, just to confirm that the radio version is not the source of my problem ... I will report on this
@FrEcP
thank you very much for your detailed explaination! I also do hard resets between the fixes. I will try HeadsetFix.cab in combination with AutoA2DP on a clean rom
@colossus_r
do you have anything useful to contribute? stay on topic please!
Well, thank you all so far, I will report my progress when the mentioned tips have finished... regards - FS
Click to expand...
Click to collapse
set up you bT via comm.manager. dont turn Bt on just choose set up bluetooth hdset device etc/ turn you cars bt on an make shure it is visible etc by keeping the on button pressed in while searching with your gsm and thats it i think thats how it worked 4 me and will work 4 every one too!!!
study your old rom be4 you use a new one and you will know how to recognize the differenzesss amen
I've experienced something similar with my volvo. In my case it paired sometimes and usually in a call it disconnected. This happened with all kind of roms. It all disappeared after a radio update.
Somebody mentioned 1.17... with rillphone 1.15... works like a charm!
Hope it helps
(else you can try to let a mechanic update the bluetooth software in your car)