Related
So I have bought a HTC Magic in Singapore about a year ago.
Some of the information about my phone before it got stucked in HTC Magic power-on screen:
SAPPHIRE PVT 32A SHIP S-ON A
HBOOT-1.33.0007 (SAPP10000)
CPLD-12
RADIO-6.35.07.29
Aug 4 2009,19:43:30
I found a site that helped me to get my phone rooted as follow:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.76.2007 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Aug 21 2009,18:19:15
Soon after, I started searching for new ROM elsewhere and managed to update my SPL to 1.33.2007 and that's where problem starts to occur..
My phone get stucked on HTC Magic screen display forever.
I was eager to get this problem solved and have not done enough research before I got myself in a worse situation with the phone hbooted like this:
SAPPHIRE UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.0006 (SAPP10000)
CPLD-12
RADIO-2.22.19.26I
May 27 2009,19:06:41
Now I can only enter hboot and fastboot.
Can somebody help me to at least get back to my original ROM? I don't wanna root my phone ever again..
Help please~
If you can get into fastboot you're fine. Just flash 32A radio/spl again and then the desired ROM. Old radio/spl - 1.33.X/3.22.X New radio/spl 1.76.X/6.35.
yeah when turning on the phone hold home and power, if you get the recovery menu then you got nothing to worry about, just flash the proper rom and all will be fine, there is even a stock htc rom with root around here.
right here http://forum.xda-developers.com/showthread.php?t=622038
but you dont have to go back to stock, you just need to put on a rom that fits your phone. i personally suggest this http://forum.xda-developers.com/showthread.php?t=654284
so good luck post back when you get it figured out
Thank you Reziukas and sike89 for the reply..
I will try the ROM recommended in the links. =)
I cannot get into recovery (-Home- & -Power-) now due to the perfected SPL (1.33.0006).
And whenever I use the goldcard method that flooded over the internet, I always get this "Main version is older!" failure message.
I think I have made the goldcard correctly cause it worked while I was trying to flash my 1.76.0007 SPL to 1.76.2007.
Any idea?
when you hold home and power what does it do?
did you root your phone with the recovery-RA-hero-v1.6.2.img?
I did but after I flashed RADIO-2.22.19.26I with SPL 1.33.0006 I can't get into this recovery mode anymore.
When I press Home and Power, it starts booting but stucked on HTC Magic screen forever..
Easily said it, I can only enter hboot (vol down and power) and fastboot (back and power) now..
Procedure
1.Turn your phone off. Turn it on by holding Back and Power, or Vol. down and Power. Either way, boot into the bootloader.
You should see the three Androids on skateboards, and the menu title should say "Fastboot".
2.Connect your device to the computer. The display on your phone should now say "Fastboot USB".
3.Open up the shell/terminal on your computer, and type
fastboot devices [enter]Your device should be listed with it's serial number, and should say "fastboot".
4.Change directory to where you have saved your recovery image. I.e. type "cd /path/to/recovery.img in windows prompt, press enter.
5.You may issue a "dir" command (Windows) or "ls" (Unix/Linux) to make sure you are at the right directory, or just skip this step.
6.Type
fastboot flash recovery recovery.img
Check your phone's display, as recovery is being sent and flashed to your device.
Check your command prompt/shell to make sure the process is over.
i got all that from Binary100100 who got it from here http://wiki.cyanogenmod.com/index.php/RE-recovery-img
give that a shot
also maybe this might help
http://forum.xda-developers.com/showpost.php?p=4066552&postcount=2
I seem like I cannot use the fastboot command in 1.33.0006 SPL??
Whenever I type a fastboot command and press enter, I always get an error message.
>> ... FAILED (remote: not allow)
Do we have any windows application that can help to bypass all checking on the phone stats and proceeds with fastboot flash directly?
Perfected spl, you need to make yourself a goldcard
Goldcard doesn't seem to work..
Whenever I try to flash a new radio, it prompted me an error message "Main version is older!"..
What to do?
when it says main version is older it means you need the goldcard.
do you have a working goldcard? if not use this
http://revskills.de/downloads/psas.zip it will make the gold card.
No need for phone?
Hello there.
I was reading this thread and I'm having a similar problem.
I have a question, sike89.
Is it possible to create the goldcard just with the software you mentioned?
My magic 32a will only go into fastboot (stuck at splash screen) and so
I won't be able to use my phone to create the card.
Thanks!
As mentioned by YamatoDelgato, I cannot boot up my phone and thus far I am unable to re-create a goldcard.
But this "goldcard" I am using right now was a working goldcard and I am surprised that it doesn't work all the times..
By the way, I found an alternative on internet saying that you can use other HTC Magic phone to create a goldcard for your phone; Although I am not sure if its gonna work out, just give it a shot..
Sike89, am I right to say that this application does not require any HTC phone in order to create a goldcard?
I can just format my SD card using PC and input the necessary information into the application to create goldcard, is it true?
Problem Solved...with a Sacrifice.
Well I managed to get my phone booting again.
I have a rogers phone so I used their "mandatory"
update (2 sappimgs) to get my phone working again.
However, this resulted in getting the dreaded
SPL 1.76.0010 meaning I can't root it easily.
However, I know that with a working
phone that I now have, I could use it to obtain
a gold card.
Boy that was scary!
I'm so scared to try rooting again but I probably will hehe !
Thanks to xda community and google search!
I lost my original nandroid backup but did manage to install an original ROM on my 32B (Vodafone). Took some work but it worked Afterwards I wrote a tutorial about it (google How to restore your custom ROMed HTC Magic (Vodafone 32B) – a walk through, I can't post links yet).
Hi,
First of all, let me tell you what happened. I have had a standard htc magic with sense UI (perfected spl) so I done everything what was needed to upgrade my phone to other ROM. Everything was ok untill my girlfriend told me next day that she can't call me. I tried to call her, an it works but in other direction doesn't. So I decided to downgrade radio and engeniering SPL to flash other ROM and everytime I was trying to downgrade radio the phone screen turns dark. After a couple of times I came up with an idea to simply use patched RUU aplication to do it. This time it won't work either. Whats more the phone turned into s-on and it only boots into something like fastboot screen but there's nothing more like some informations about radio and stuff and RUU. And here is my question.
What can I do with my phone to bring him to life?
Is it posible to make a goldcard synthetically, I mean without pluging phone into USB to get some codes?
ps: Sorry about my english. I think my phone is more important at this time.
possible solution
Hello there,
yes, you can read the CID of an SD card from your pc too.
the CID is basically a serial number for your SD.
since S in SD stands for secure, some programmers can limit their applications to run only in the SD they were installed to by verifying the CID.
anyway, if you can access HBOOT mode (vol down + power), it would be a lot simpler flashing a basic RUU rom, then root it, install a recovery and do whatever you want.
If you choose to follow this method, I suggest you to restore a RUU with android 1.5 or 1.6, it's easier to root and you're sure everything will work. i heard 2.x version of android sotck roms for htc magic can have some problems in rooting process.
good luck to you!
I will try to get the CID of my SD card, but what's more complicated is that whatever way I want to turn my phone on it only boots with something like fastboot screen, but instead of options to choose on the screen i there's only RUU and when i plug-in the USB cable the sign changes into RUU USB. So accesing any other mode is imposible. Only the blue light mode works. :/
mikamikamika said:
I will try to get the CID of my SD card, but what's more complicated is that whatever way I want to turn my phone on it only boots with something like fastboot screen, but instead of options to choose on the screen i there's only RUU and when i plug-in the USB cable the sign changes into RUU USB. So accesing any other mode is imposible. Only the blue light mode works. :/
Click to expand...
Click to collapse
What carrier is your phone from and what is your current hboot info? You should be able to see it from the RUU fastboot-like screen.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
hboot info:
sapphire PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
The phone works in Orange PL
I would be very thankful if You, or anyone could help.
Download this, plug your phone into the computer and turn it on so that you have "RUU USB" on the screen, the double-click the downloaded file and run it. See if that gets you anywhere.
The same situation as later. Everything goes ok until the radio is being updated, then the screen fades black. The whole process ends at 36%.
Your going to have to see if mumilover adds his comments here.
Sent from my HTC Glacier using Tapatalk
Hi, Not sure if this helps, check out this thread as it is a good source and also there is an article on flashing without the sd card. http://forum.xda-developers.com/showthread.php?p=12210523#post12210523
mikamikamika said:
sapphire PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Click to expand...
Click to collapse
You got radio/spl combo mismatch.
Run this command and give us the result:
Code:
fastboot getvar version-main
Are you sure that the above info is correct and updated?
version-main is 3.05.401.1
I made a mistake, hboot is actually 1.76.0008.
hi dear friends i have a problem with this phone
the phone was working well before i do my stupid move
i try to unlock the phone using the method posted by sr legija, using riff box to repair boot
after repair boot i try to restore with this firmware versions one by one, after its fail repairing boot again
RUU_Sapphire_T-Mobile_US_2.10.531.4_release_signed_NoDriver.exe
RUU_Sapphire_Rogers_WWE_2.17.631.2_release_signed_NoDriver.exe
RUU_Sapphire_TMUS_1.94.531.1_DMD6_release_signed_NoDriver.exe
RUU_Sapphire_T-Mobile_US_2.10.531.3_release_signed_NoDriver.exe
RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe
no one of this can completely flash the phone , radio and in other system frozee and doenst complete the flash
i was searching for completely 2 days and i just found a sappimg.nbh posted in forum , for sapp300 and this image restore coimplete the htc via sd card
but my surprise, after restore with this flash the phone power on and its unlocked , but touch screen dont work
in bootmode says
sapphire unknown 32B ship s-on G
HBOOT-1.33.0006 (sapp*****)
cpld-10
RADIO-2.22.19.261
MAY 27 2009,19:06:41
THE MAIN PROBLEM IS THIS PHONE ITS 32A VERSION CAUSE CPU mt700A
SO I JUST CAN FLASH WITH 32B VERSION BUT I CANT GET THE TOUCH SCREEN WORKING AGAIN
ANY HELP ?
THANKS IN ADVANCE
hello everyone,
Last night i tryed to update my phone with a ruu file the program started erasing flashing etc... untill i was left with a white screen where i have the following:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Dec 8 2009, 17:38:48
RUU USB
And the image of a chip...
Can anything be done please help,
NOT DEVELOPMENT RELATED
iondarie said:
hello everyone,
Last night i tryed to update my phone with a ruu file the program started erasing flashing etc... untill i was left with a white screen where i have the following:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Dec 8 2009, 17:38:48
RUU USB
And the image of a chip...
Can anything be done please help,
Click to expand...
Click to collapse
NOT Development related
Moving to General.
Please be mindful of where you post your inquiries. The Development sub-forum is reserved for developers with contributions ONLY!
Thank you.
Make goldcard and flash again.
Hi
my device screen shown hexagonal on chips,like your device ,stuck on RUU USB,
last time i ask anybody here what i can do..i didn't found ..
nothing we can do as long as we have a root,
if you have a root you can
fastboot oem rebootRUU.
or tell us your
fastboot oem -h ,screen..
Now i can fix my phone by myself. i got JTAG ,and built my own ,
just only JTAG can works,God save my phone..
Man you dont need jtag!!!Dont pay for this situation!Just find an original Signed RUU and flash like nothing happens.Or create goldcard from another android phone.!
yes if
if your SD card can read by device,yes you can use RUU update.
if you SD card can't read no nothing you can do.
if your oem boot stuck on strange boot, you must pray a lot to God..
awebagar said:
if your SD card can read by device,yes you can use RUU update.
if you SD card can't read no nothing you can do.
if your oem boot stuck on strange boot, you must pray a lot to God..
Click to expand...
Click to collapse
His phone is not MT3G v1.2 or Fender, his phone is common HTC Magic 32A, so he need create goldcard and flash RUU again
His first attempt was wrong cause every official ROM checks CID on phone. If phone's CID is not equal with ROM CID then update will fail. RUU updated hboot and radio and failed at CID-step and locked in RUU-mode.
Hello,
I recently tried to update the spl/radio to use a new rom on my HTC Magic 32A and after updating the spl the phone just hangs on the "HTC Magic" screen. Fastboot or Recovery wont start if I hold the buttons. Was just wondering if it is bricked or if it is possible to fix via cmd or so? I read alittle on jtag but I think if it came down to that Ill just buy a new phone cause this phone is not worth that much trouble.
I rooted the phone a year or so ago. First I had cyanogen but they dropped support so I switched too gingeryoshi but the wifi stopped working. It still connected to tmobile hotspot but I couldnt tether or connect to my wifi. So I thought of putting on Froyodragon. I updated too HBOOT-1.76.2007 but then it just hanged on reboot.
Thanks for any input.
Turn phone off (if you have bootloop then remove battery and place it back after 10-20 sec)
Turn on by pressing Back + Power - it's fastboot-mode
Write first 5 rows of info (all symbols are important)
If you do not have Android Sdk Tools configured - do it
Additionaly search for fastboot.exe - this utility can be absent from sdk tools
Connect phone to pc when it in fastboot-mode
Run
Code:
fastboot getvar cid
fastboot getvar cidnum
fastboot getvar version-main
Sent from my A7-040 using Tapatalk
hello,
I tired back+power, power+vol down, and power+home, they all just sit at the "HTC Magic" screen.
Did you remove battery before try and placed it back? If yes and any combination did not help -> 'brick'. Only JTAG can help.
What ROM did you have before?
And what ROM did you update?
There are no bricked phones when 32A phone updating with 32A official ROM. I don'y understand how you bricked your device.
Even if hboot updated but radio did not - there are some chances to restore...
Tell us how it happened?
same problem
Sir im also facing the same problem like this person is facing:
I guess that I've bricked my HTC magic phone. actually it was working fine but after when i flash Hboot file named (ISO-8859-1__STOCK-HBOOT) on it.
my device stop functioning not any key is working phone its not coming up in hboot loader screen by pressing vol down key+power key, not even in recovery mode. by pressing home key+ power key.
but if i press vol down+power key its not showing any hboot loader screen but if i use command prompt after that and use fastboot devices command its shows the device like in machine language
just like this:
D:\adb\tools>fastboot devices
?╞ñ?¿╥§?4:¶♫ fastboot
here are the details of my mobile. is there any way to fix this issue?
HT03VPB03044
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013
CPLD-13
RADIO-2.22.28.25
OCT 21 2009, 22:33:27
android 2.2.1
baseband version
62.50sj.20.17u_2.22.28.25
kernal version
2.6.32.9-g94b855e
[email protected] #1
buid number
3.56.531.1 CL300801 realase-keys
Sir i've also created gold card on my htc magic phone when it was working properly i've the image of gold card and the same card 512MB micro SD card which i used to create the gold card before but i dont know how it will work on the phone as it is not going into bool loader or in recovery mode.
please help me. i heard that if i got correct RUU file for this device i can troubleshoot the problem but in stock rom no any RUU file is working on it.
I've already tried there RUU ROM on this device:
RUU_Sapphire_T-Mobile_US_2.10.531.3_release_signed_NoDriver
RUU_Sapphire_T-Mobile_US_2.10.531.4_release_signed_NoDriver
RUU_Sapphire_T-Mobile_US_3.12.531.1_FRG83D_release_signed
RUU_Sapphire_TMUS_1.94.531.1_DMD6_release_signed_N oDriver
i request all the XDA member to help and troubleshoot this problem.
regards
Sandeep Deol
5[Strogino] said:
Did you remove battery before try and placed it back? If yes and any combination did not help -> 'brick'. Only JTAG can help.
What ROM did you have before?
And what ROM did you update?
There are no bricked phones when 32A phone updating with 32A official ROM. I don'y understand how you bricked your device.
Even if hboot updated but radio did not - there are some chances to restore...
Tell us how it happened?
Click to expand...
Click to collapse
Yes I removed the battery (only way i could turn it off). I stated most of this info in the first post but Ill try and state specifically what versions I had. When I first rooted I used Cyanogen Rom. It worked fine but they dropped support so I switched too Gingeryoshi. I dont remember what version. I tried to update it too 1.5 first but it didnt work but fastboot and recovery still worked so I decided to switch to a new rom instead and tried Froyodragon but it needed radio 6.35.16.19 and HBOOT-1.76.2007. So I wiped it then I did the HBOOT-1.76.2007 and after installing and rebooting is when it stopped working.
Crap, I just did this too... got a yellow arrow coming from a box onto an Android. I flashed a mismatched 6.35 radio (I guess?).
Can't boot to fastboot--can only boot to blue light mode (trackball+power) and phone will charge if connected by USB--but is never recognized by ADB or fastboot.
jmdsdf said:
Crap, I just did this too... got a yellow arrow coming from a box onto an Android. I flashed a mismatched 6.35 radio (I guess?).
Can't boot to fastboot--can only boot to blue light mode (trackball+power) and phone will charge if connected by USB--but is never recognized by ADB or fastboot.
Click to expand...
Click to collapse
Wait 5-10 minutes, "yellow arrow coming from box" equals unpack and flash. Phone should finish this process.
Try to load into hboot-mode: turn phone off (remove battery and place it back if bootlooping), then turn on by pressing Volumedown + power
In this mode you can flash full official rom in sappimg.zip format (or sappimg.nbh if you have 32b magic)
If phone doesn't load into any mode (except trackball + power) - then you have brick and only jtag can help.
Sent from my A7-040 using Tapatalk
But, it goes to a black screen about ten seconds after that.. sadly I think it needs to be jtagged and i will just give it away for parts.
I also tried the sapphire image trick, no luck.
those all sound like bricks..
problem with 32b - looping after rom.
Believe me, I tried a lot here and on google before posting here.
I tried to install a ROM on my htc magic 32b and certainly was not what I should.
Information from my device:
SAPPHIRE PVT 32B SHIP S-ON G
Hboot-1.33.0013 (SAPP30000)
CPLD-10
RADIO-2.22.28.25
OCT 21 2009,22:33:27
I've read very, very much. I read that I have to change the SHIP for ENG.
Also read about ruu, but I found a will for my device, nor know how to run.
First of all, my phone is only on LOOP. I can normally access the fastboot USB.
But does not accept commands, I believe it because of S-ON.
I do not know how to install an img it to get S-OFF.
Could someone help me get back my life device?
Thank you and with the help of google translator.
huahua!!!!
No one post about my problem...