Backlight leak - XPERIA X2 General

There's a backlight leak on the left side of the LCD on my X2, from top to bottom. Seems like the display is not properly align or the edges of the casing loosens.
Had anyone of you have the same problem?
You're feedbacks please. So we may know if this is a common problem on X2's.
Thank you

Related

Blur screen

Hi
I don't know if any of you guys have problem like this or not, but screen on my topaz seems to got wet inside, when I place it against the light I can see that it is sort of wet inside the screen and the sencetivity of the screen has been dropped. Last night it seemed that the top layer of the screen sticked to the lower layer and I could see the sensor dots on the lower layer of the screen so it stopped the phone getting started.
I dont think I can use the gaurantee cause I modified the rum.
so wondered if you guys had the same problem, or I am open to any suggestions that what can be done.....
Thanks

Few questions about X2

As a fresh owner I have a few questions:
1 - The lower right corner of the front panel wobbles (?), moves slightly on touch, I can press it for about 1mm (see the attached screen). It is especially annoying when pressing OK or dial off (or whatever the button is called). Is it normal?
2 - The screen has a slight green tone (hue), can anything be done with it?
3 - LCD has noticeable light leaking near the bottom side, again, is it normal? (Well, the screen does not work now anyway, gotta flash the phone.)
Thanks
Biges said:
As a fresh owner I have a few questions (too lazy to search):
1 - The upper right corner of the front panel is flimsy (?), moves slightly on touch. It is normal?
2 - The screen has a slight green tone (hue), can anything be done with it?
3 - LCD has noticable ligh leaking near the bottom side, again, is it normal? (Well, the screen does not work now anyway, gotta flash the phone.)
Thanks
Click to expand...
Click to collapse
(1) I have no issues with this, seams fine on mine
(2) I cannot notice any hue, maybe you have a faulty unit given the blue colour and the movement of the panel.
(3) Yes LCD light is noticible, I also get leaks through the optical pad when I have the notification LED's on
1. I got some small loose on the front pannel upper area, it's especially felt when You hold the phone in one hand and work with Your thumb pressing the screen or just put the phone to You ear. You feel then the pannel moves a bit down. Maybe thats normal or just the build quality is not so good at all.
sounds like you have a faulty one. mine is solid as a rock. the loose screen and the green hue could be related. there shouldnt be any discolouration at all and i can only see it getting worse to be honest. where did you get it? if its somewhere reputable then id take it back and ask for a decent one while its still in warranty.
i do have tiny bit of light leakage near the buttons, that does seem common.
Mine is well made too, no hardware problems.
I have a silver one, solid as a rock, light leaks are present though...

weird behaviour on hd2 when charging

Hi, I bought a cheap clear rubber case from eBay . I notice after I put the case on , I am unable to control the screen when I'm charging. Remove the case and it works again ? Anyone has seen something like that before ? Is this due the capacitive screen ? The case wrap over the edges of the screen though. Thanks !
For sure the rubber case is touching the screen so your HD2 can't recognize both your touches and also the rubber case touches, other than that I can't think of anything else that might have happend!
does the skin cover up the proximity sensor in the upper left ( you should see 2 circles O O when you hold the phone at a slight angle just to the left of the earpeice grille

[Q] MB526 - Issue with touchscreen

I love my Defy+ as much as anybody here. And a whole lot of thanks to Quarx for his efforts to keep our phones up to date.
I have got one nagging issue. The left side of my touchscreen (roughly 8mm from the left margin from top to bottom) is not registering any touch at all. The issue has been there for a long time and I am not able to find a cause or solution.
I am having difficulty while keying in Q/q/1/Z/z, some times a/A also.
Thank you.
lywyre said:
I love my Defy+ as much as anybody here. And a whole lot of thanks to Quarx for his efforts to keep our phones up to date.
I have got one nagging issue. The left side of my touchscreen (roughly 8mm from the left margin from top to bottom) is not registering any touch at all. The issue has been there for a long time and I am not able to find a cause or solution.
I am having difficulty while keying in Q/q/1/Z/z, some times a/A also.
Thank you.
Click to expand...
Click to collapse
Unfortunately, this is a hardware problem. There are (transparent) conductive strips crossing up/down and left/right the display that senses the touches, one of the strips is damaged. Had this on the upper part of the display, right under notification bar, and couldn't access some buttons on apps. You'll have to change the glass cover on the display. Search for "defy digitizer", "defy glass cover", "defy touch screen" or so. A new one (not original but works, although it's not gorilla glass, so it's easily breakable) can cost as little as 10 $
alerort said:
Unfortunately, this is a hardware problem. There are (transparent) conductive strips crossing up/down and left/right the display that senses the touches, one of the strips is damaged. Had this on the upper part of the display, right under notification bar, and couldn't access some buttons on apps. You'll have to change the glass cover on the display. Search for "defy digitizer", "defy glass cover", "defy touch screen" or so. A new one (not original but works, although it's not gorilla glass, so it's easily breakable) can cost as little as 10 $
Click to expand...
Click to collapse
Thank you.
I would rather bear with this issue than putting on a cheap digitizer.

Blue/Red Blemish On Screen

Hey, so I was just wondering, does anyone else have a small blue/red light visible on their screen over dark backgrounds? I'm not sure when it could've happened, but apparently too much pressure was applied and now my screen is slightly damaged. Depending on the angle I look at it, the light is either red or blue.
Is there any fix to this? Will replacing the screen work, or will I need to start saving up for a replacement device? I'm not entirely averse to doing that; the magnetic lock/wake sensor is on the wrong side of the phone, the bottom speaker grille is loose, and now this issue is present (I probably caused this one, but still). I just thought this phone would last a couple more years tbh.

Categories

Resources