Related
I have just got the HD2 and been using it for a few weeks. Downloaded a few apps (eg HTC rom, BSB tweeks) and all is good. Saw Max Manila and looked like a great idea - checked my manila version 2.5.19211619.0 and downloaded 2.7 SE (checked it's right for my manila) loaded onto phone and it crashed after soft reset. Took battery out and phone doesn't go past first screen (with the red writing bottom left) - Hard reset is the same and now I'm worried!
Any ideas???
sad to say yy sounds like hard reset time.
power off, hold volume up and volume down, tap power keeping volume up and down pressed til the screen comes on and follow the prompts.
it will reset your phone to factory defaults.
never used max manila so I cant help with what the problem might be, but if there is a developers thread for it you might be better asking there.
Thanks for replying samsamuel - I've tried the hard reset and it doesn't work!
Even when I do as you say, I get the white start screen with htc written on it and then several red lines at the bottom right starting R G and D and that's it! It just stay's like that - At this moment I'd pray for a hard reset!!
I'm going to try booting from the sd card but I'm not sure I can get the phone to go into the bootable mode. I've downloaded the HTC rom and extracted the nmh so we'll see.
if your phone is provider locked then that will not work.you need the rom that came on your phone. so if was from uk o2 then you need the o2 uk rom, otherwise it wont work.
No luck! Whilst I've got everything to sort the phone out it won't do anything but load the white first screen no matter which buttons I hold down.
Man this sucks!
Guess there's nothing for it except the bin unless anyone else has any other ideas??
can you get into boot loader?
press and hold vol down(not up this time, just down) tap and release power, keep vol down held. should boot to striped cultures colored screen.
if you can what does it say next to SPL?
Hi Samsamual
Thanks for helping but no, won't go into bootloader either - doesn't respond to any input (even when I conect the usb the charge led doesn't come on!) and just starts with the white screen with the HTC logo and then the red writting appears and it just hangs - left it for 5 mins just to be sure and no change
Looks like I've really messed it up although I have no idea what I did wrong - instal went just like the other things I installed.
Ahh shame. All i can suggest is the original rom sd card method. But it MUST be the propper rom that came on your phone, so if you got it from vodaphone, , , even if it is unlocked, you must use the voda rom.
Also, have a really good read through the pages in teh rom development section. If you can find someone with the exact same issue, you could be one step closer to fixing it.
Brotherskid said:
Thanks for replying samsamuel - I've tried the hard reset and it doesn't work!
Even when I do as you say, I get the white start screen with htc written on it and then several red lines at the bottom right starting R G and D and that's it! It just stay's like that - At this moment I'd pray for a hard reset!!
I'm going to try booting from the sd card but I'm not sure I can get the phone to go into the bootable mode. I've downloaded the HTC rom and extracted the nmh so we'll see.
Click to expand...
Click to collapse
you must tab the power botton for a short time just tab it and leave it with keeping pressing on the volume up and down buttons don't leave them i think it must work with you tell me if it works
Brotherskid said:
...I'm going to try booting from the sd card b
Click to expand...
Click to collapse
When you tried the SD card method did you use a 2GB SD card and was it formatted to FAT32?
WB
Have you tried a boot (all combinations!) without the sd card installed?
Hoss and WB - thanks for the comments
Hoss, I've held the volume buttons for over a minute after powering on - no change
WB, I can't get the phone to go into boot loader screen but thanks for the info for the future. Next time I'll see if I can copy the original rom just in case.
Resigned myself to having a new paper weight on my desk and looking for a new phone - Guess I won't be putting so many programs on my new one....
PA - Thanks for the advice - Yes tried with sd card in/out sim in/out bootloader, hard reset, soft reset and always the same.
In your posts you do not mention where you bought your HD2, and I do not know what country you are in.
From what I have read, it seems that you did not flash any ROMs, nor change your SPL, so if I were you, at this point, rather than accepting a bricked paperweight, why not explore your warranty possibilities?
Contact the place you bought the HD2 (the dealer) and explore your options. Since I do not know which country you are in I will not suggest an HTC service center, but if your country has such a center, at last resort, you might check out that possibility.
Since you apparently had no hardware problems before the manila incident, it would seem that it is a software glitch somehwere.
Good luck with all of this. It must be almost heartbreaking to have this happen with such beautiful hardware.
rlydiard said:
In your posts you do not mention where you bought your HD2, and I do not know what country you are in.
From what I have read, it seems that you did not flash any ROMs, nor change your SPL, so if I were you, at this point, rather than accepting a bricked paperweight, why not explore your warranty possibilities?
Contact the place you bought the HD2 (the dealer) and explore your options. Since I do not know which country you are in I will not suggest an HTC service center, but if your country has such a center, at last resort, you might check out that possibility.
Since you apparently had no hardware problems before the manila incident, it would seem that it is a software glitch somehwere.
Good luck with all of this. It must be almost heartbreaking to have this happen with such beautiful hardware.
Click to expand...
Click to collapse
What's most annoying is it wasn't as if I was doing anything crazy! Max manila is used by many people (from what I've seen in the threads) and I guess I downloaded the wrong one (although naturally I checked and it's the right one). Certainly will curb my using of 3rd party software! As for the warranty, you're right, I can try and see if it can be fixed (bizarrely, that hadn't occured to me - I thought that with no resets working HTC couldn't do anything). Thanks for the tip and I'll let you know how I get on.
Surely your warranty will cover this. Yes, let me (and us) know how all of this goes. You will get your phone back to what you deserve, for sure!
I had the same issue.
Sent mine to HTC and got it back with the comment "Cannot reproduce"
Probably it solved itself when the battery was removed for a couple of days in the mail.
It has now been working for two weeks again.
Fingers crossed.
watnuweer said:
I had the same issue.
Sent mine to HTC and got it back with the comment "Cannot reproduce"
Probably it solved itself when the battery was removed for a couple of days in the mail.
It has now been working for two weeks again.
Fingers crossed.
Click to expand...
Click to collapse
Experential nut I may be, but just wondering if you had the problem after you installed the MAx manila? I wonder now what versions of OS may be causing this problem.
i had something like this with my HTC Diamond... It stopped responding completely when turned on, didn't respond to the usb cable being plugged in (the round ring used to illuminate when charging)
I took the battery out, for about 30 minutes... then left it charging for another 30 minutes - booted up straight away and never did anything like that again
Worth a shot just leaving it without power for awhile, and then just recharging it
Like watnuweer mentioned, "cannot reproduce" probably fixed itself by not having the battery left in for awhile
fakker said:
i had something like this with my HTC Diamond... It stopped responding completely when turned on, didn't respond to the usb cable being plugged in (the round ring used to illuminate when charging)
I took the battery out, for about 30 minutes... then left it charging for another 30 minutes - booted up straight away and never did anything like that again
Worth a shot just leaving it without power for awhile, and then just recharging it
Like watnuweer mentioned, "cannot reproduce" probably fixed itself by not having the battery left in for awhile
Click to expand...
Click to collapse
This is getting more interesting, what do you suppose is the cure of taking out the battery, and then charging? I do not doubt your experience, I am just extremely curious if anyone can explain this phenomena.
Guys i need help my HD2 is 3months old and I've flashed 3 different Roms on it, about a week and a half ago it started acting funny, the touch screen wouldn't respond all the time especially if i lock it using the power button, now anytime i press the power button the touch doesn't respond at all sometimes i have to reset it 50x before the touch comes back so now I've resorted to my phone always being on & having it charge whenever i can to avoid it dying as it doesn't respond to touch when i wake it up again.
is it a software thing or do i need to send it back for hardware repairs?
if your planning on sending it back then make sure you flash your old stock ROM and remove any HSPL etc.
i cant tell from your question if you have flashed a new ROM since you have been having these issues? if you havent try that, if you had a bad flash then hard resets might not work so flashing it again may help.
as for a hardware problem, thats not really my area but with things to do with other hardware, if it works then it works, hardware doesnt usually stop an start unless it has power or heat issues, it sounds like you can run it fine so long as it doesnt shut down? if thats the case then id be thinking it may be more likely software, course youll know if that is the case if you flash a new ROM
i will flash a new rom tonight, Dutty's always seemed to work fine so i will try with that, since i never took insurance or a warranty out on it i guess it doesnt matter if it has spl on it or not.
oh new development, if i press & hold the power button really hard i can use the touch screen but as soon as i let go it stops responding again.
that dont sound good, hope the flash works but its sounding more an more like a hardware issue.
You'll need to pull the HSPL off if you want them to tinker with it under warrenty (it has a year) or they may charge you
I had the same problem with my phone. I flashed different roms for it, but the touchscreen still didnt work. I sent it in for warranty repair.
well i just flashed it back to Dutty's Rom & its fine for now, i will give it a day & if its not fine tomorrow i will send it in, thanxs for the help guys
phone is ok now its only frozen twice for a drum total of 4secs so i guess it was something in the Energy Rom i installed, never doing it again lol
Alright, so here's my problem. My touchscreen won't response to any finger movement. I could press the hardware buttons like power, volume and talk and it response to that but my problem is mainly trying to get inside my rom. I tried flashing rom via NAND and via clockwork mod and nothing helps. The G Sensor seems to work just fine because it rotates the screen when I'm inside my ROM. I could go back into MAGLDR but I don't think anything there is going to help?
Has anyone else experience anything like this and if so, what did you do to solve it?
had same problem, found a FIX
i have had same problem past couple of days. i was running darkstones SuperRAM_FroYo_V1.5 build with oz 2 cleanex rom. i know that every now and again it would be a pain to unlock the device with the agonising wait for the lock screen to show up but this time the touch screen would not work at all not recognising any movement and not dragging the unlock button across. i would have to take the battery out and restart, even some times touch screen would fail completely when in winmo too, got to a point when 3 days of working then not working and taking the battery out a million times to boot back into android to unlock the device, then touch screen died completely.
FIX- Hard reset
will reset windows mobile. all data on device will be lost.
hold down up-vol key and down-vol key, soft reset button and then power button till it displays formatting screen. follow on screen instructions.
hope this helps.
tidygrant said:
i have had same problem past couple of days. i was running darkstones SuperRAM_FroYo_V1.5 build with oz 2 cleanex rom. i know that every now and again it would be a pain to unlock the device with the agonising wait for the lock screen to show up but this time the touch screen would not work at all not recognising any movement and not dragging the unlock button across. i would have to take the battery out and restart, even some times touch screen would fail completely when in winmo too, got to a point when 3 days of working then not working and taking the battery out a million times to boot back into android to unlock the device, then touch screen died completely.
FIX- Hard reset
will reset windows mobile. all data on device will be lost.
hold down up-vol key and down-vol key, soft reset button and then power button till it displays formatting screen. follow on screen instructions.
hope this helps.
Click to expand...
Click to collapse
well i have woke up this morning to be able to unlock my device to then locking it and not being able to unlock it again!!! i had notification to say it had managed to restore 16 apps whilst i had been asleep so i am thinking there is a dodgy app out there some were
mazdarider23 said:
Alright, so here's my problem. My touchscreen won't response to any finger movement. I could press the hardware buttons like power, volume and talk and it response to that but my problem is mainly trying to get inside my rom. I tried flashing rom via NAND and via clockwork mod and nothing helps. The G Sensor seems to work just fine because it rotates the screen when I'm inside my ROM. I could go back into MAGLDR but I don't think anything there is going to help?
Has anyone else experience anything like this and if so, what did you do to solve it?
Click to expand...
Click to collapse
Sent from my PC36100 using XDA Premium App
I have this problem and have found no way to fix it, I have tried everything except possibly going to the clk loader instead of magldr. when i put the phone to sleep with the power button is when i have the issue of not being able to unlock my phone in Android. I have tried task 29, going back to original windows roms, sd and nandroid, it is a hardware issue related to the digitizer as far as I'm concerned. I love my HD2 and really need to fix or find another one. I know this doesn't help, but maybe a little more insite if nothing else
I had the same issue. With my 1st HD2 it started as an intermittent problem, then eventually completely stopped working. With my replacement it just started to happen again. I immediately flashed back to stock tmo windows and the touchscreen would work so long as I did not try and put the phone on standby or wake the phone using the end key. If the phone went to standby on its own, the touchscreen would not work either. I changed the settings so that the phone would not go into standby at all. I then learned that locking the phone from the windows menu and allowing it to go to standby that way somehow averted the touchscreen problem. After 2 days, the problem seemed to resolve itself, almost completely. If I try and wake it using the end key, the touchscreen still wont work, but every other button on wake works. Also, putting it in standby with the end key seemed to not cause the problem any longer.
I dont know if the issue varies per person, but what worked for me was going to stock windows for a couple of days, then starting over with android. I guess it depends on how far along the problem has progressed.
Look at my thread in my Sig about the Unresponsive Screen Solved. This sounds exactly as that. And there are various workaround solutions through out the post.
hi everyone!i'm a newbie to htc hd2.i've bought a "second hand" one just a couple of days ago and i've immediatly noticed some software issues(when i still had wp 6.5):
1)when i tried to exit from the sleep mode pressing the endbutton on the right, windows didn't let me unlock the screen sliding the lock button(fortunately pressing one of the other buttons i temporary solved this issue...)
2)i couldn't power off or doing any of the actions (like rebooting or put the phone in "airplane mode") from the menu which appears holding down the endbutton for a couple of seconds.
so i thought this was a software problem and i installed gingerbread rom after doing a task29 format and the radio, hspl and magldr 1.12 updates, but i still have the identical troubles also on this new firmware.(i tried also froyo with the same result)
some of you had a similar problem in the past?
is there a solution or should i use the warranty (obviously restoring the phone to its original configuration)?
thank you for any answers!my experience is little and i've lot of things to learn!
guys i foud out that pressin softly the lower part of the end button everything works fine..i'm quite sure this is hardware stuff..don't you think?
My phone was repaired by an amateur, unfortunately, just 2 weeks ago. I never anticipated needing my volume button again since I can just manually turn down the volume myself through navigating through the menus.
Unfortunately for me, again, I never anticipated having to us the volume buttons to navigate through the magldr when attempting to upgrade to windows mobile 7.
Is there a way that I can go back to my original windows rom? Or get the phone back up and running again without having to deal with the volume button repair?
-Side note, sort of
I called the place that repaired it and the guy isn't in to help me out, so hopefully I'll get a hold of him Monday and work something out. I want to avoid the shop as much as possible though because... ummm, let's just say he did a horrible job with replacing the digitizer.
Mmmmmmmm this is quit a predicament you have here as you need the volume down button to manualy enter bootloader.. Not good!!!!
The tech ripped the tiny ribbon cable that goes to the rocker buttons for the volume. The ribbon cable is $50 on eBay. I'd try to jump the traces with a tiny screwdriver first though.
I'm guessing it's not on an auto-boot?
I have exactly the same problem! except the amateur technician is me and now I just found out that apparently I haven't rooted the phone the right way, but I'm stuck
same problem here, i cut the volume keys ribbon and now I am stuck to mgldr v 1.3
cozened said:
I have exactly the same problem! except the amateur technician is me and now I just found out that apparently I haven't rooted the phone the right way, but I'm stuck
Click to expand...
Click to collapse
"rooted" the phone?? lolz
I think you are slightly confused here lad.
Htc HD2 Leo volume keys schematic
well if you have right equipment you could make this connection.
i had same problem - i opened my hd2 many times ( trying to fix heating issues ) and one time i ripped of volume keys, but lucky me i found this pic and i was able to fix.
credits goes to " jodge " for posting this pic in another forum.
ubejd said:
well if you have right equipment you could make this connection.
i had same problem - i opened my hd2 many times ( trying to fix heating issues ) and one time i ripped of volume keys, but lucky me i found this pic and i was able to fix.
Click to expand...
Click to collapse
Nice find and nice post, hopefully this can help a lot of people that have this issue or at least technicians that repair this problem.
Thanks a bunch. I got the same issue.. I will try to fix, and will let you all know. Hoping for I havent thrown the broken piece..
I have an HD2 that has its volume buttons ripped too... I'm on SD Android right now (thankfully HSPL and such didn't need volume buttons, and WinMo has an EnterBootLoader.exe)
So am I to assume that even 6 months after this was posted, there's no way to properly navigate MAGLDR without volume buttons?
To my knowledge, that's the only way to move up/down in magldr.