Related
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
canonyang rulez)))
hate this numbers 1.08.001, as in "lost" film
DONT USE *SPL* (uspl,hardspl,jspl,another) IF YOUR SPL UNDER 4.00.0000
DrMobile said:
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
Click to expand...
Click to collapse
Send your phone to HTC Service Center, Same thing happend to me and they
changed it under warranty.
In my country there is no service center for HTC.
and phone is come from norway
I need solution. otherwise customer will eat me.
Br.
A. Wahab
Hi DrMobile,
Have you solved your issue? I have the same issue as you...
Please help by sharing with us the solution
Thanks,
Lamnl
same in my mobile error 300
i am still trying the rom without any success. please help
i have the same problem. my phone is showing bootloader , i have ipl/spl 1.08.0001 i tried anythin but nothing worked.
i hope there is a solution with our phones, and someone around here will take a look to our problem.
stuck in bootloader
i have the same problem.
eror 300
pls help
me 2 plz any one can help me 2 plzzzzzzzzzzzzzzzzzzzzzzzz
"those with a SPL lower than 4.0.0.0 or something like that gets bricked. I just wanted to get this first post edited to reflect that so that people don't keep bricking their phones."
(Moderator: whether this is accurate or not I do not know - but use your own discretion)2nd Jan 2008
from another topic, send them for repair
Try this:
http://forum.xda-developers.com/showthread.php?t=343450&page=2
Warranty got back my device back to life
Hi I bricked my device a few days back and tried all the stuff to bring it back to lifee but in vain... I finally gave up my trials and approached the service centre. They just replaced the motherboard inside and luckily everything seems fine now. They hadn't charged me anything as it was within warranty. Anyone in India if you need service centre address..
http://www.asia.htc.com/asia/in/support_sc.html
Though this site says HTC, I got my Dopod C800 serviced there...
Very few questions and cool guys.
Regards,
Murali
Now I think that the reason of non flashing, even with official RUU, could be corrupted CID-block after using HardSPL on devices with low IPL/SPL. I've read thread about similar problem with Wizard. The question is: how to restore the CID block in our bricked devices? I'm not even sure if this theory with CID-block is a reason...
What do you think about such a trick:
- Run RUU on someone's working HTC device but only until the moment, when it wants you to click the last button to finally proceed with flashing. (This step is to let RUU to know that this RUU is correctly dedicated to our device). It's a kind of fake for RUU, cause our CID doesn't match the CID of ROM included in RUU.
- Next disconnect working device from the USB and connect your bricked device with launched bootloader mode
- Next click the final button to launch flashing in RUU application. If the process of CID matching was done before this step, the flasher should start and let us flash our bricked device. But I'm sceptic to this solution. If it was so trivial, everyone could flash his device with different ROMs so easy...
I can't try this trick cause I don't have working HTC. What do you think? Will it work or not?
DrMobile said:
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
Click to expand...
Click to collapse
D'you mean
working Herald or any HTC?
I have the same prob
I'm thinking about working device, exactly the same as this bricked one - in this case Herald. But all of this is only a theory. I don't have enough knowledge about the RUU flashing process.
My another idea is to swap only ROMUpdateUtility.exe, rapitool.exe and EnterBootloader.exe files from official RUU dedicated to your bricked device, with different versions of these files from another HTC devices just to test if it helps to recognize our bricked devices by RUU. Maybe the problem is wrong version of these files? But which versions are correct?
I'm just trying to find a solution to unbrick our f.....g Heralds . I know this is only a matter of time and soon or later we will know what to do. Moreover I believe that there are people, even on this forum, who know how to unbrick our Heralds but some of them don't want to do us a favour. I know what I'm talking about...
GenePr said:
D'you mean
working Herald or any HTC?
I have the same prob
Click to expand...
Click to collapse
i have the same problem.
error 300
pleas help
have the same error...300
but i can manage via mtty using bootloader commands
when i put password <Bs...> the mtty shows last thing ive running and phone shows a progress bar with 0% (like.. what uve been doing last time?)
i think we can manage it via bootloader commands
i know.. i know
(at least our devices run bootloader mode, is recoverable!)
it can be flashed by SD? how?
Welcome to the club...
As far as I know, SD flashing doesn't work because of the CID-lock.
tramuyo said:
have the same error...300
but i can manage via mtty using bootloader commands
when i put password <Bs...> the mtty shows last thing ive running and phone shows a progress bar with 0% (like.. what uve been doing last time?)
i think we can manage it via bootloader commands
i know.. i know
(at least our devices run bootloader mode, is recoverable!)
it can be flashed by SD? how?
Click to expand...
Click to collapse
no, it cant be possible! im not goin to pay HTC Herald
there's a solution, a HOPE... (u try to flash with original flashfile?)
I thinks the solution is to unlock CID from bootloader mode, for old models i did so, but how to unlock Herald's CID
hey...
i hope you guys can help me out.
my problem is ,that i bought an herold witch is stuck in the bootloader !
the need little stripes won´t dissapear by any type of reset.
there a so many threads that stroke that a bit... but none only for that specific propblem...
i don´t know by witch method the thing was flashed so i can´t help you there.
i hope
and yes i tried the search
so thanx in advance
You could always try flashing the original ROM. They can all be found here:
http://rapidshare.com/users/5EWZ4
If that doesn´t work it would be helpful to know the SPL version, I can´t tell by the picture the numbers are too small.
OH my god !!
Thx a lot ! for tha fast answer....
but i can try it in a few days....
will post the result then
thx
from looking at the picture you included, I can see your IPL is v1.xx
There have been many people who have permanently bricked their phones by trying to hardspl and uspl ... so make sure you do some research before attempting to do those..
If it goes to bootloader automatically, and it has an SPL of 1.x, it's probably already permanently bricked. Your only option is to bring it to a repair center. Sorry.
i will be back next week on tuesday i think ... then i can look witch spl i have.
hey. and thx for your help already
i am pleased for every hint you have for me !!
could that be a solution for me too ??? ----> http://forum.xda-developers.com/showthread.php?p=1911779
ok...
my SPL is 1.08.0001
IPL the same
i am now trying to reflash the original firmware... lets see...
hm...
invalid flashingtool.... error 300 ????
it says i need a newer flashingtool...... WHAT !!??!?!
i now figured out that it is an italien device.. but the italien firmware also didn´t work...
do anyone has an idea ??? PLEASE....
Like I said, if it's stuck at bootloader and has that SPL, it's probably permanently bricked. Either the Radio or SPL or IPL was accidently overwritten. I was researching and found something that maybe be useful if it's the radio being overwriten but don't have the knowhow to port it to the Herald... yet.
hm...
i just tryed : 1. Kill ActiveSync process - wcescom.exe on your computer.
2. Attach USB-cable to device.
3. Run programm from attach, select "\\.\WCEUSBSH001" from
port's list and click Ok.
4. Type (type himself, not copy/paste) in window:
password BsaD5SeoA(press Enter)
ruurun 0(press Enter)
ResetDevice(press Enter)
and after a hardreset..... the screen went green....so... Step forward or did i now find the perfekt brick procedure
what means a greenscreen ?? btw
so now back in rainbow-mode
is there a way to CID unlock the thing with PUTTY
short before it enters bootmode it displays "searching for sd-card"
flashing from SD-Card ??? possible ???
Hello to all:
Only after try searching in forum and google i decided to wirte in this fantastic forum. Sorry for my poor english....
I have a ebay-purchased Artemis (P3300) and, using Opera mobile it freeze and I swithched off. It never change Windows Mobile more....
It only reachs the bootloader mode and if I try to charge another ROM but I can't because it give an ID error. The device is not CID unlocked....
I try to unlock it:
- Kaiser unlocker: not posible, requires ActiveSync
- SuperCID: the same above
- Blackstone Cid unlocker: Is my solution....but doesn't work!!
Changing the Vista-driver and in Xp I get the same promp:
Device no response (or similar)
I can use RUU with mtty without problem.
The posibles solutions the I can understand throught this forum are:
- Technical Service: No posible, the ebay-vendor removed the IMEI - without IMEI they don't repare without a legal IMEI (and in garantee...)
- Hard Reset: doesn't work, the device format his internal device, start windows installation and it freeze completely.
- CID unlock: Only posible in bootloader mode and in doesn't work with blackStone
- Original ROM: If i could find the original ROM, the device will complete the actualization and (with lots of luck...) restart the device OK
There is another solution?? a tecnical service without IMEI requirement??
Thank you very much, I'm waiting hopefully answer....
thanks!!
fisrt try the unlocker from artemis forum not kaiser or any
then try to get the original ROM which is the best solution
if you know the vendor of it then i think u can find it here
The forum unlocker??
I have the impression that I used all the unlocker over the internet....
Please, can you say me what is the link to the forum unlocker??
Does it work on bootloader mode??
Searching in the forum I find the Artemis wiki whit the list of officials ROM to the device...I could test one by one until one works....
I'm going to get the device ID through Mtty and USB sniffer, but how can I use this CID, I say, there is any list of Artemis ROM order by device CID?? how can i find it?
First at all, thank you very much....I thought that my device was dead....but with your answer....I can do anything....I hope to fit it !!
bye
well first i don't know if will work in the bootloader mood or not cuz i had'nt ussed it in this way and this is a link to what i have
http://forum.xda-developers.com/attachment.php?attachmentid=175590&d=1239564954
well the problem in with the original ROm that is alot of them... but try to know ur device vendor like O2, Orange ..etc then find the rom for it i think even if u asked for it (after u know it ) someone will provide u with a link
and about ur device ID i don't know hot it can be usefull :-S
maybe soneone else can help with with that
hello all
i have i-mate jasjam its proplem is no gsm
i tried alot for flashing the radio bymany verions but it stoped and when i tried t flashing it by many roms and also the original rom it stoped on the step gsm
and if i flahed it by any rom wihout the radio it completes but with no gsm
i hope to find a resolve to this prop plz to make my phone alife again
thx for u all
This is maybe problem with hardware ! better to you go in service,bcs if you flashed with original rom and radio,he must to work 100%
thz alot for help but i need a solution do it by myself thx
Hi, can you please write down what is on the bootloader screen ?
hi aze2learn thx for trying help me
ok
on the boot loader screen
HERM100
IPL-1.04
HERM100
SPL-2.10.Olipro
thx alot aze2learn
Well, since you already have hardspl 2.10-Olipro, please make sure you flash WM6 (green welcome screen) or above because WM5 (blue welcome screen) for sure will make the device show 'No GSM' if it writes an old radio version. Try original rom for your device here first : http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
It is recommended to use radio version (GSM) from your carrier. You can also try other radio (if you want to) from here : http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms . Some say 1.47.30.10 is the best in terms of power consumption but maybe not suitable for others (depends on carrier/geography)
Note : Only original ROMs from HTC/carrier have radio. Cooked roms don't include radio.
All the best
ps : Only HardSPLed device will allow flashing extracted radio rom. Stock SPL will stop the device from flashing.
ok man thx alot i will try and i will tell u but tell me how to flashing it by pc or by sd
thx
Try RUU first (flashing through pc using usb cable) but if you're having problem such as error 260 (no connection), you can use sdcard method since you already HardSPL your device
ps: sdcard method only works on FAT32 filesystem and non-SDHC microsd.
i tried during the pc and it gives me error 262
and i tied during the sd stoped on gsm step
i dont know what to do??????!!!!!!!!!!!!!!!!!!
mony_nana said:
i tried during the pc and it gives me error 262
and i tied during the sd stoped on gsm step
i dont know what to do??????!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Hi,
Extract RUU_inside.exe (use winrar or 7zip) RUU_inside.exe is in the original HTC ROM package ... get the RUU_signed.nbh and put into a new folder.
Then use RUUWrapper from here : http://forum.xda-developers.com/showthread.php?t=298737 and put it in the same folder with RUU_signed.nbh
Boot the device in bootloader mode. In RUUWrapper, tick 2.10 (new bootloader) and is it Hard-SPL. Follow the instruction.
All the best
ps : please check your PM
hi man
its stoped again on 11%
my mind will be pumped and i dont know what to do
i do everything i think
i will be crazy
maybe your battery drained out already? if so, try turn off the phone, charge it for 30 mins and try again.
ps: have you read your PM?
its already full charged
Please don't worry too much. Since your device already HardSPL, your device can still be revive.
i hope it will be aliveagain but how?
i am too tired from searching on the internet about this prop
and i didnt get any resolve for it
i think u have mor experiance than me and u can search more deeper than me
i will be here tmorrow maybe u can find a selution
i am from egypt and u ?
I'm from Malaysia (GMT+8) and please read your private message. I would really love to help but I need extra info such as what OS are you using, what happen before you got into trouble,etc.
plZ! help my Surround bootloader halfBricK problem >> >>
--------------------------------------------------------------------------------
....... iget this lonly messege PD26100 SS-BC (4K) on the red line of the bootloader screen wich known as halfBick thats cuzed (by mistake ) to update my spl 4.xx to older version
so plzz any ideas 2 solve my prob>
note :
my wp7 is working but icant flash any rom
Ditto, you are talking about the single line SPL on the bootloader screen?
yes. that screen!!
http://forum.xda-developers.com/showthread.php?t=1195647&page=67
Keep an eye on that link. I am waiting for someone to post an update about the bootloader.
x7sage7x said:
http://forum.xda-developers.com/showthread.php?t=1195647&page=67
Keep an eye on that link. I am waiting for someone to post an update about the bootloader.
Click to expand...
Click to collapse
Hi
mee too facing same problem yesterday i used that tool and now my surrond phone is half bricked condition.
unfortunately!! Jtag function also not support this phone..
i m software engineer and i really curious to solve this problem.
if i get any progress i will surely post here...
br
Possible halfbricked solution?
I have a little info. Registry path "HKEY_LOCAL_MACHINE\System\Platform\DeviceTargetingInfo" contains BootLoaderVersion value. It is rewritable (for example 1.2.2250 instead 3.2.2250 on my phone). Can it evoke HTC OEM Update again? Or, must I change also another values - FirmwareRevision (2250.10.12203.207), RadioHadwareVersion (A.102.0.D4), RadioSoftwareVersion (5.69.09.29a_22.50.50.21U), ROMVersion (1.22.207.03), SoCVersion (2.2.5.0) ? Could not it damage phone more, then halfbrick? But there is one problem - after soft restart original value (3.2.2250.0) is restored on my Gold. May be it is copied from SPL header, or Registry Editor is not working? But rewrited BootLoader version is occured in Setings/about before phone restart. Thanks for answers. Martin
Hi friends. More usable answers about halfbricked problem I have got in thread http://forum.xda-developers.com/showthread.php?p=19330919#post19306499 . Probably cab sender solute it for any devices. M.
This is what appears
Its terrible
Hope someone can help us
HTC surround half bricked plz help.
My HTC surround half bricked,,, in spl mode its showing only one line (sp*****),, and even i cannot enter usb host mode,,, so tried OEM updates via cab sender and gold card method nothing worked,,, so plz can somebody help me to solve this,,, either by OEM cab install,, or some other methods,,,
MY Device config:
HTC T8788
Carrier AT&T
Software Windows phone 7.5
OS Version 7.10.7720.68
Bootloader version: 4.3.2250.0
radio software version: 5.69.09.05a_22_50_50_21H
Device is carrier unlocked .
HTC surround half bricked solution ?
Hi all,,,
MY HTC surround is half bricked,, it shows only one line in spl mode,,, so i tried so many ways to recover it,,, cab sender, goldcard, and via zune,, but nothing worked,, and i saw some one posted, its possible to flash "*.ffu" file on half bricked devices. So I'm searching for the rom .ffu file for HTC Surround AT&T. Please somebody help me.
Thanks in advance.
Hi shiva0386, I have a similar problem. Do you know a solution?
I have a similar problem. Do you know a solution?
help us! plz
hi
sorry guys i searching everywhere ,, but no luck,,, may some xda developers can help us...
I have exact same problem.
Plug phone in it turns on and shows phone and computer.. Bootloader shows one line but cant do anything cause will not connect to computer
Halfbrick Bootloader
Guys,
Please update if anyone have solution for this problem,
facing half brick- single line bootloader problem and not able to recover due to lost usb connection.
Plz ....Help.... Help..... Help......
i do not know about solution but there some thread in forum guide about unlocked developer, interop unlock and root tools, so we can do that and use it normally, only one disadvantage is we can not fully unlocked.
Try it: http://forum.xda-developers.com/showthread.php?p=39259185