Hi, i've tried to install a new rom (win 6.5) and the installer stop's and give error 270 (something with image), and the same with flash. I've tried with windows 7 and with windows xp. Could anyone help me?
Thankx a lot
Code error
midras said:
Hi, i've tried to install a new rom (win 6.5) and the installer stop's and give error 270 (something with image), and the same with flash. I've tried with windows 7 and with windows xp. Could anyone help me?
Thankx a lot
Click to expand...
Click to collapse
listen for code error
GUIGOU said:
listen for code error
Click to expand...
Click to collapse
Ok, thanx a lot!
By the way... how do i get a bootloader updated, or were do i get that?
Thanx again
midras said:
Hi, i've tried to install a new rom (win 6.5) and the installer stop's and give error 270 (something with image), and the same with flash. I've tried with windows 7 and with windows xp. Could anyone help me?
Thankx a lot
Click to expand...
Click to collapse
It's meaning you not yet to JUMP-SPL. Please go back to JUMP-SPL and HARD-SPL (Possible) again. Becuase all customize rom must be JUMP-SPL every time in order to up rom, And for HARD-SPL is only one times.
Sorry for my bad english.
Related
hello for all,
I have one XDA IIi and i have one problem. the PDA is dead, don't turn on. but if I press RESET boton the bootloader work, and on the screen displayed USB ... V1.06. so, when I try upgrade a new ROM the software in my PC don't displayed version are available on PDA and the activesync don't syncronize with PDA.
the software starts upgrade new rom to pda, starts with RADIO, but when that is on 99% and when the start transfer ext rom ocorred one error and don't work.
so, i tryed that process any times and don't work.
please help me.
PS: sorry my english, I am live in portugal
hi,
are you using windows xp or vista? if vista find a friend with a pc running xp as vista wont allow you to update the rom.
also make sure you have the 100% correct 2003se rom NOT wm5 or 6 as they wont work on this pda
hello,
I have windows xp SP2, and I tried in my laptop and don't work.
when Radio stack finish, one error ocorred.
when I try install o2 english rom ocorred one error: Error 113: Extented ROM Update Error
please where I find 2003 SE ROM for XDA IIi?
thanks
Antonio
satoniboy said:
hello,
I have windows xp SP2, and I tried in my laptop and don't work.
when Radio stack finish, one error ocorred.
when I try install o2 english rom ocorred one error: Error 113: Extented ROM Update Error
please where I find 2003 SE ROM for XDA IIi?
thanks
Antonio
Click to expand...
Click to collapse
in these forums, just hunt around for the latest update, but if that dont work, you may have a brocken phone
thanks by reply.
I have someone solution for this.
someone software extra or other solution?
Hello people,
i a new new to the rom flashing and stuff, but i have some problems.
I have a typhoon myguide 6500xl with windows 2003SE on it
now i want to put windows mobile 6 on it, but that don't work
I followed the guide, but it won't install the cert.cab and the SPVServices won't work then because they do'nt have the dll, and they cannnort create a file.
The cert.cab gives an error : it is not a windows ce file.
So i cannot run it.
Could someone give me a Hand ? the SDA_application(ran it from my pc, worked fine it says, when i put it on my pda it won't work: not a windows ce file
Please help me,
thanks in advance
..it is a completely different device - even not made by HTC...
So how could I unlock it, or put windows mobile 6 on it ?
Thanks already !
Hello people!
I've been working with windows 7 7592 on my HTC HD2 for some time now and i really want to keep windows 7. I can't seem to find a way to update from 7592 to 7720, does anyone know of any ?
Leo
you'll have to download first the wanted update cab from xbosmod/sylvester's page and send it to your phone with the help of update cab sender from the same guys
Hey, thanx for the quick reply florin_stann!
I tried googleling xbosmod/sylvester but i found nothing, can you be more specific on were i should go to download the rom?
which ROM you have? author (which cooker not version)
only Yuki ROM can update with CAB files.... for other ROM's you must flashing from beginning
Hmm, all i see here is OS Version: 7592.WM7_Main(mojobld).20110308-1514.
Does that help?
Lewnidas said:
Hmm, all i see here is OS Version: 7592.WM7_Main(mojobld).20110308-1514.
Does that help?
Click to expand...
Click to collapse
no... but is possible this is Yuki BTTF ROM?
Can't say for sure m8.. any way you know i can find out?
Any way to figure out who cooked my rom?
I installed windows 7 on my htc hd2 some time ago, i think it was the first Mango release, 7592. Any way i can find out who cooked that specific rom i used so i can update ?
Thank you in advance,
Leo
Lewnidas said:
I installed windows 7 on my htc hd2 some time ago, i think it was the first Mango release, 7592. Any way i can find out who cooked that specific rom i used so i can update ?
Thank you in advance,
Leo
Click to expand...
Click to collapse
did you can send CAB files to phone? if you can, this is Yuki (BTTF) ROM.... but maybe is better to try change to other ROM.... only one warning... if your ROM is Yuki, then your sdcard is locked... you must first unlock it with sending unlock CAB file to phone and then format it before install new ROM....
i recommended this ROM
http://forum.xda-developers.com/showthread.php?t=1356833
I could send cab files through a Microsoft developer tool, and my sdcard is not locked.
I will try the rom you recommended, thatk you for the reply dxdy!
Will let you know if i come up with results.
Leo
Why is everything so complicated!!
Ok my friend, i allready have Magldr v1.13 and windows 7592.
On your tutorial you write:
- when you turn on phone press and hold power button to boot direct to MAGLDR:
* go to 5. USB Flasher and run ENG_DWI.exe to flash ROM (or TR_DWI.exe. ENG is installer in English, TR is Turkish)
- after flashing process done, and when show Main screen with Tiles, do hard reset (Settings - About - reset my phone)
- you are done... ignore next steps
Got two questions on that.
I downloaded 3_HD2_Pdaimatejam_Rom_Wp7.5_mango_7.10.8107.79_v7.3.rar but there's no ENG_DWI.exe in the file..
How does it install windows 7 8107 just by hard resetting ?
I feel like a pain in the neck, sorry for that, if things get more complicated i'll try to find another way or just stay with 7592.
I flashed sdcard, went to usb mode but DWI.exe wont regognise the usb connection..
Lewnidas said:
I flashed sdcard, went to usb mode but DWI.exe wont regognise the usb connection..
Click to expand...
Click to collapse
one time file is named ENG_DWI.exe.... totally not important how is named, DWI.exe or ENG_DWI.exe.. is same file..
did in USB mode in MAGLDR recognize USB?
Dxdy!!
It worked! Running on windows 7 8107!
Thank you for your tips, be well
Leo
Dude.. I've had this phone for what.. 3 years now?
It still feels new!
Everything works.. marketplace works, speech works, everything.
Only thing there is no alphabet with the apps, but that's fine, i'm sure i'll find something somewhere.
Thanx again dxdy!
Lewnidas said:
Only thing there is no alphabet with the apps, but that's fine, i'm sure i'll find something somewhere.
Thanx again dxdy!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=22260479&postcount=2185
I flashed "2_HD2 Pdaimatejam Rom Wp7.8 OS 7.10.8858.136 RMT v8.7" ROM and than I get a cellular data connection problem: the configuration is good, when I tried to load a internet page, the loader bar seems in progress but it stops at a certain point and nothing happened... Can someone help me understanding what's wrong? Thank you.
send cab file fix... is many times written in Pdaimatejam ROM topic...
http://forum.xda-developers.com/showpost.php?p=35489458&postcount=6348
dxdy said:
send cab file fix... is many times written in Pdaimatejam ROM topic...
http://forum.xda-developers.com/showpost.php?p=35489458&postcount=6348
Click to expand...
Click to collapse
Thanks, how can I send it? I haven't read about it (too many pages) ... Hope this will solve the problem
read tutorial (from my signature or download from pdaimatejam)...
dxdy said:
read tutorial (from my signature or download from pdaimatejam)...
Click to expand...
Click to collapse
Ok, now everything's is fine! Thank you! :fingers-crossed:
problem with cab sender
dxdy said:
read tutorial (from my signature or download from pdaimatejam)...
Click to expand...
Click to collapse
Hello!
I would like to ask your help!
I have a problem with internet connection, mail sync and etc. what is using mobile internet (cellular data connection).
I tried to use the cab sender as described in the tutorial but, I get this error message in the dos promt window when I want to select the "send cabs to device" function.
error message: 'CHOICE' is not recognized as an internal or external command, operable program or batch file
Thanks in advance!
Regards: Gyula
For XP you must use http://xboxmod.sylvester20007.com/TOOLS/wp7_cabsender_winxpfix.rar
dxdy said:
read tutorial (from my signature or download from pdaimatejam)...
Click to expand...
Click to collapse
I use the XPcabfixer but I have another problem, I have a guess but I am not sure what should be the problem.
Please help me a little more
error code: 800B010A
error message: A certificate chain could not be built to a trusted root authority
Thanks
send files
gianniJ said:
Thanks, how can I send it? I haven't read about it (too many pages) ... Hope this will solve the problem
Click to expand...
Click to collapse
to send the files to the device using cab sender i have to start the phone with volume down+start button?????
radukw said:
to send the files to the device using cab sender i have to start the phone with volume down+start button?????
Click to expand...
Click to collapse
no... phone must be turned ON and connected via USB... Zune must be closed... all is described in install tutorial...
HD2 windows 7.8 DTF
Hi can any one Please help me ive followed all the video steps from juicyboose's tutorial ive got as far as the DFt install i click next and next again but it comes up with these errors
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
PLEASE HELP
did you set magldr options before flash WP7?
read install tutorial from my signature
Thank you
dxdy said:
did you set magldr options before flash WP7?
read install tutorial from my signature
Click to expand...
Click to collapse
I didnt set magldr flash, how do u do that.... please
i just followed the tutorial like for like .. in the same time ... but the last inbstall failed comimg up with that error message
please help ,..
did you set USELAST24NAND?
zune
dxdy said:
no... phone must be turned ON and connected via USB... Zune must be closed... all is described in install tutorial...
Click to expand...
Click to collapse
sorry for asking but i bought the htc hd 2 one week ago,so am i a begginer. what is is zune?i read the tutorial for cab sender.zune is the last problem,i hope.
zune is PC application for sync media files and update WP devices... "must have tool" if you have WP...
also all recommended tools and apps for WP and PC is written in install tutorial... this you must have if you want use WP... all links for download is there also
also is recommended to have Windows 7 or 8... with Windows XP you can something but if you want use WP and all potential is recommended to have Win 7 or 8
it worked!
dxdy said:
zune is PC application for sync media files and update WP devices... "must have tool" if you have WP...
also all recommended tools and apps for WP and PC is written in install tutorial... this you must have if you want use WP... all links for download is there also
also is recommended to have Windows 7 or 8... with Windows XP you can something but if you want use WP and all potential is recommended to have Win 7 or 8
Click to expand...
Click to collapse
thanks a lot! i had some problems with my laptop and i couldn't send the files to my phone but today i resolved and data connection works
800705B4 problem
When I run CABsender.bat or wCabSender, update of any CAB always fails due error 800705B4 : timeout/not enough space.
Computer sends CAB to the phone and then phone reboots. After reboot phone stays black for 30 secs, than it shows "connect USB" image and after that it reboots. WP7 says that update was unsuccessful, CAB sender reports error 800705B4.
Code:
Setting the installing update state.
Error during update: Function: UpdateMain::ReadConfig, Line: 242, Hr: 0x800705b4, GetLastError: 0
Error during update: Function: UpdateMain::Init, Line: 143, Hr: 0x800705b4, GetLastError: 0
Error during update: Function: UpdateMain::StartUpdate, Line: 1216, Hr: 0x800705b4, GetLastError: 0
Update failed. hr = 0x800705b4
Update Application - Completed Post Update @ 00:02:09
Update Application - Returning 0x800705b4
Unable to unset simulation mode
Attempting to clear the 'installing IU' update state
succeeded
Clearing the persistent update flag.
succeeded
I have 4GB SD card and phone recognizes it fine. I tried to reflash phone ROM without SD-card, CAB sending has same problem. Although most of the phone and live services work fine, many programs like "Leo advanced", "Program manager", "Connection setup" do not launch.
Hi again!! iam back with more problems.I have a htc p3600 WITHOUT A ROM and i try to install the windows mobile 6.5.When i try, the installation stack on 1% and then my phone close.CAN SOMEONE HELP ME? DID MY PHONE BROKE? PLEASE HELP!!!!!!!!
dimitris-samos said:
Hi again!! iam back with more problems.I have a htc p3600 WITHOUT A ROM and i try to install the windows mobile 6.5.When i try, the installation stack on 1% and then my phone close.CAN SOMEONE HELP ME? DID MY PHONE BROKE? PLEASE HELP!!!!!!!!
Click to expand...
Click to collapse
Have you solved it?
yes i solved it! First of all you need a pc with windows xp.Second enter your phone on tri color screen and then in your computer hit ctrl alt delete and in the second tab find wcescomm.exe and rapimgr and stop them! Search http://forum.xda-developers.com/showthread.php?t=308691 for a program called splxploit nad run unbrick! At the wait to finish its progress and install you rom!
dimitris-samos said:
yes i solved it! First of all you need a pc with windows xp.Second enter your phone on tri color screen and then in your computer hit ctrl alt delete and in the second tab find wcescomm.exe and rapimgr and stop them! Download http://forum.xda-developers.com/attachment.php?attachmentid=43539&d=1184192788 a program called splxploit and run unbrick! At the end wait to finish its progress and then try to install your rom!
Click to expand...
Click to collapse