Hi
Wonder if anyone has this experience? Read that some folks had difficulty installing ver 1.2 when running Jeff's exe with win 98. I also uses win98 and would appreciate some input to this problem if indeed there is one. Can anyone who has used Jeff's exe for ver 1.2 tell me how long it takes approximately to run for the installation? (ie 5 mins ? ) Just like to know before getting all panicky half way during the process.
Cheers
Vic
The process should take about 5 minutes, but then I've only used Jeff's exe on Windows XP. Anyone successfully use it on 98 ?
Myself and another member here have both been stuck trying to upgrade using jeffs exe on 98. I have NT at work but not admin privilage to install activesync. So I am going to have to wait until I get to a friends with XP.
Can confirm that Jeff's exe does not work under WIN98.
I followed all the same procedures on a 2000 OS machine and now have a successful update.
BY the way - don't think it can be said enough!! Everyone here Rocks!!
Now all I have to do is break my contract with the positively useless CO2!
Hi guys
Thanks for reply. Did you say that you have used Win 2000 OS and it works for Jeff's exe file?
Wonder if anyone has used Jeff's exe file(ver 1.0; ie the first SER) with Win 98 and had any problems? I may have to use the older SER if it works with Win 98 or go thru the process of upgrading my OS.
Cheers
Vic
before you update your OS - although you should probably do it anyway - try updating activsync to the latest version. This may make a difference.
hi freands
can i use wm 6.5.5 in my htc viva qvga ? if yes then where i get ?
mehulkarate said:
hi freands
can i use wm 6.5.5 in my htc viva qvga ? if yes then where i get ?
Click to expand...
Click to collapse
I assume that you meant 6.5.3, first of all why did you opened new thread ? the whole opal forum is full of roms then also you opened a new thread.
Anyway here are some wm 6.5.3 roms
http://forum.xda-developers.com/showthread.php?t=571420
http://forum.xda-developers.com/showthread.php?t=619336
There are more but please use search function before posting a new thread.
6.5.3 build 28008 lite rom not working
hi jagan2:
i flashed my opal with ur rom ( Windows phone 6.5.3 build 28008 lite rom) but after started phone the volume key of it not work and memory card not open in file explorer, i taring but it was not ok
plzzzzzzzz help bcos i like very much ur rom ,its very nice
mehulkarate said:
hi jagan2:
i flashed my opal with ur rom ( Windows phone 6.5.3 build 28008 lite rom) but after started phone the volume key of it not work and memory card not open in file explorer, i taring but it was not ok
plzzzzzzzz help bcos i like very much ur rom ,its very nice
Click to expand...
Click to collapse
Iam extremely sorry bro it has a bug that i also know. So i think you need to change your rom until i fix that.
I suggest you to try nguoc rom although it will give less internal storage and less free ram still for beginner its perfect.
need ur help bro
mehulkarate said:
hi jagan2:
i flashed my opal with ur rom ( Windows phone 6.5.3 build 28008 lite rom) but after started phone the volume key of it not work and memory card not open in file explorer, i taring but it was not ok
plzzzzzzzz help bcos i like very much ur rom ,its very nice
Click to expand...
Click to collapse
====>>
hi bro,
today i got my new cell htc viva with windows 6.1 pro.
where did and how can i upgrade to windows 6.5, can you please guide me step by step, i tried to search in this website (XDA) but did not got any perfect solution ...
i download few rom but got error as 270 (file/rom/image currupted )
did not got solution, help needed, please help me
Thanks
Bhupes
spl change
well i made this a while ago, and finally got around to get it fully tested and release it.
this HardSPL is based on version 1.26 SPL. and is version 2 (2.00.cmon). also i *think* this one will not hard reset the phone
it's for any OPAL***** modelid now,
thanks to wlinsong and PhamQuang for testing
instructions:
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder (Opal_HardSPL_v2_0.zip).
2) you must have the phone synced with your PC, i.e. device must be in Windows Mobile!
3) run Opal_HardSPL_v2.exe.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) device should go to a grey screen
6) go on with RUU, Hard-SPL flashes, device automatically reboots, job done.
7 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 2.00.cmon
+1: if the screen won't go to grey mode (SSPL), then try manually entering SSPL by using the Opal-SSPL-Manual.zip - run the EXE on the phone then when it went to grey screen, run the HardSPL exe on PC and flash.
finally, donations are always appreciated to the "To Cmonex" link in my signature
now, enjoy the hardspl and cooked roms
UPDATE: How to flash stock SPL back for warranty purposes - please use this only if you need to return device for repair!
steps:
0. first flash entire stock ROM, then after that you can flash stock SPL as *last step*. do not reverse this flashing order please
1. get the RUU_Signed.NBH file from attachment (opalstockspl126.zip (185.3 KB))
2. run hardspl package from attachment (Opal_HardSPL_v2_0.zip)
3. *after* Opal HardSPL EXE extracts files, replace extracted RUU_Signed.NBH with the one from opalstockspl126.zip i.e. when asked to overwrite, say Yes, if it doesn't ask, then you are trying to copy it before running the HardSPL EXE, which is the wrong order.
4. flash just like you flashed HardSPL (see original instructions above)
5. device reboots, you can now check if it says 1.26.0000 or still 1.26.cmon or 2.02.cmon, in the latter case you did something wrong, it has to show 1.26.0000.
Attached Files
Opal-SSPL-Manual.zip (326.4 KB, 5194 views)
opalstockspl126.zip (185.3 KB, 2930 views)
Opal_HardSPL_v2_0.zip (1.03 MB, 5829 views)
download from this link http://forum.xda-developers.com/showthread.php?t=446446
I have Fujitsu Siemens Pocket LOOX C550 Pocket PC
when i try to install Linux.... install falls and i delete some drivers for Wireless,Bluetooth ..... need help about install please give me links to download windows 6.5 ...and help to install.....
Thanks
New OS
in fact i need new OS
Hello all,
i'm trying to install Windows 7.5 on my HD2, but I can't install any of the required programs/application because of the error in the title. Can anyone please advise what this error is and how I can fix it? Thanks in advance.
Indy
Windows Mobile programs have - like most of the other Windows programs - the extension EXE. When you try to run a Mobile program under W32 (normal Windows) the error message from your title appears. Seems as if you're doing something wrong. What guide do you use?
I have an xperia x2 with Windows mobile 6.5. Its Windows became problematic after installing softwares and hard resetting over the course of time.
There are some ROMS out there which is basically some softwares in .CAB format. My question is this;
Is it posible to install a fresh copy of windows on my phone and how?
My question maybe wrong but I really need some information on this issue.