Hi guys I've had my HTC HD2 for about 2 months now and it's really good (T-Mobile UK) - with the original rom - I haven't bothered cooking it with anything else.
I've updated a few things with some the tweaks mentioned on here - cheers for those!
One of the things I've noticed is that since I installed .Net 3.5 Compact (I think it was this), everytime I perform a soft reboot, I get the following error message:
"The file 'Documents and Settings' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
When I go into the "Documents and Settings" folder on the phone (using Resco File Manager), there is only the "default" subfolder dated 06/01/1980 and nothing else.
Do you know how I can fix this? I don't really want to do a hard reboot as this will wipe everything off the phone's memory.
Any help will be greatly appreciated.
Many thanks
Related
I have had many pocket PC's and the Universal w/WM5 is the only one that gives me consistant installation problems. I had listpro 3.0 installed in program memory. I uninstalled it with the intent of re-installing it on the SD card. Unchecking it from activesync did nothing. Removing from the ppc directly told me that all of the file were not removed. I saw the the folder still existed in program files, do I deleted the directory and shortcuts pointing to it. I have had this exact same problem MANY times
Am I the only one with this problem? I don't find any messages like this.
Next, I try to reinstall listpro and it won't reinstall :x I get a message cannot be installed, try another location (which does not work). Do I need a hard reset? I tryed installing another program and I can still install other stuff, but the removal did not work again.
GaryK2 said:
I have had many pocket PC's and the Universal w/WM5 is the only one that gives me consistant installation problems. I had listpro 3.0 installed in program memory. I uninstalled it with the intent of re-installing it on the SD card. Unchecking it from activesync did nothing. Removing from the ppc directly told me that all of the file were not removed. I saw the the folder still existed in program files, do I deleted the directory and shortcuts pointing to it. I have had this exact same problem MANY times
Am I the only one with this problem? I don't find any messages like this.
Next, I try to reinstall listpro and it won't reinstall :x I get a message cannot be installed, try another location (which does not work). Do I need a hard reset? I tryed installing another program and I can still install other stuff, but the removal did not work again.
Click to expand...
Click to collapse
Hi Gary!
I have a lot of experience in this sh*t. WM5 cannot uninstall or install in a lot of cases. Usually if you still have some files or folders which are on the same location than with the installation, installer says: cannot install. In that case you have to delete (or rename) the folder left, and then you can install it. In other cases installer stays in a loop install condition, and cannot continue. In that case try to install another application to finish somelooped order. I realised another thing, which is very interesting: when you want to uninstall a program, and your pda says it cannot be removed - or something -, if I run Vijay555 killphone application in 98% of the cases after it I can uninstall the same.
I hope this wil help!
Hi,
Perhaps I have been lucky but I havent had any issues with regards to installing or uninstalling programs.
I do make sure that I soft reset before and after - so maybe thats a golden rule!
Matt
Yes, softreset would be a good tip in more cases, but it wouldn't solve the problem when you want to install a program which needs a place what exists.
I did find some files in the windows directory and deleted them. That WORKED. Just doing program files is not enough. In this case, the file name was the same as the program. I don't expect to be that lucky all the time.
I have done soft-resets when it does not work. I do a number of trial programs and tend to forget prior to removal. What a apin
Got to love Microsoft - reboot is the answer to everything.
Installation problems.....
I am having the same problem too.
Even after a hard reset when I try and install Sprite Backup & Agenda Fusion I keep getting the install error: 'cannot be installed, try another location'
It's driving me up the wall! I would have thought after a hard reset this wouldn't be an issue. I'm now the proud owner of an MDA Pro (Universal) that I can't use because the software I want to install won't install.
Can anyone help me please?
I'm getting the following error after upgrading to the latest T-Mobile ROM (Wing).
psShutXP.exe
The file 'psShutXP' cannot be opened. Ether it is not signed with a trusted certificate, or one of its components cannot be found. You Might need to reinstall or restore this file.
psShutXP will work. Periodically I'll get this error upon boot and then the item won't be displayed in the bottom tray. I searched the forums and someone posted about having to do a hard reset after a ROM upgrade (but I've never seen this in any of the instructions). Was I supposed to do this? Is this my problem? Will it wipe out everything I've installed by doing a hard reset?
Thanks in advanced.
Up until a few days ago, my HD2 was working fine. Then I tried to install Android. I used the one that you just copy to the storage card and run a file called zharet.exe ( !!NOT HARET.EXE!! ). I think it was Cotulla's ROM. First time, it crashed. Second time, meaning after I installed Radio ROM version 2.12, which is required (more specifically, 2.08 or above is required, but 2.12 was easier to find), it started and installed, then rebooted. Third time it worked and was able to send a text message to my stepfather. I switched back to WinMO to ask him if it got there, then I started Android again. It crashed, sending me to the boot screen of WinMO. Upon this start I was no longer able to run many files (executables), the running of which resulted in the message "The File *PROGRAM NAME* cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
I have tried numerous fixes:
Soft reset
Reinstalling the applications
Seeing if .NET Compact Framework was installed; the phone claimed it was, but I couldn't find any trace of it and so I tried to reinstall it. I was not able to, so I "uninstalled" it from the phone, which still thought it had it; the operation took no time, so I doubt it was there in the first place. When I tried installing it to the phone again, it said that this version was already in the ROM. Also tried installing an older version of the CF, but it just said I had a newer version.
Switching memory cards (3 different ones)
Renaming the memory card and restarting, a fix recommended to some other people who had a problem with similar symptoms. It refused to cooperate and said that the memory card could not be renamed.
My next step will be to rename the memory card using a device other than the phone itself.
I don't want to hard reset as I wish to keep my messages and contacts, but if that's what is needed to "un-half-brick" this phone, I will of course do it. The way it acts now, I might as well have kept my n95.
It is worth noting that HardSPL should be installed, as it was required for the Radio ROM flash.
EDIT: HardSPL install IS verified, boot screen reads as follows:
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
In this thread, Gargoyle999 is describing my exact problem: forum.ppcgeeks.com/showthread.php?p=1882858
Keep in mind that this phone is Norwegian with Telenor as its carrier, although the phone itself is not locked and capable of using any carrier.
EDIT: The files that may not be run are mostly third-party ones, like MorphGear, zharet, Google Maps and so on. Most programs that came with the phone, like Copilot, Footprints and Opera work.
I am not too familiar with XDA, so forgive me if I am posting in the wrong section or making some other rookie mistake xD
I am having the same issued on one of my HD2's...anyone??? Help!!!!
This is NOT and android problem.
I'm not exactly sure, but it's a security measure in WinMo that disallows unsigned programs from running after the system has crashed due to those programs running, probably to protect the system from malicious programs.
All you need to do is disable security on it. There are various thread on this site in different places that tell you how to. Personally, I found the mobile security configurations manager(windows) is the best way. Just plug in your phone in WinMo, using activesync, open the program, and load device. Then you can just select no security, and provision it. It'll overwrite all the proper registery settings and whatnot for you.
Also, GOOGLE IT. I found all this information myself just by searching "Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file" +windows mobile 6.5
Yes, yes Google it...I understand...But guess what? I did and found the same utility. And guess what? I got another error when it tries to install a cab file on the phone and for whatever reason the cab file errors out...I came here after reading and trying a ton of stuff and happened upon the OP's topic today.
Another thing is I realize it may not be an Android specific problem BUT prior to installing the mattcfroyo build and then attempting to test another build I didn't have any issue installing a cab file from the SD card. Also before anyone offers about installing another SD card I tried that also and no haps.
Weird and I am still searching for a solution but again XDA is the spot and researching here has not provided me with a working solution as of now....sssooooo...HELP!? Or not...
lstrike said:
Yes, yes Google it...I understand...But guess what? I did and found the same utility. And guess what? I got another error when it tries to install a cab file on the phone and for whatever reason the cab file errors out...I came here after reading and trying a ton of stuff and happened upon the OP's topic today.
Another thing is I realize it may not be an Android specific problem BUT prior to installing the mattcfroyo build and then attempting to test another build I didn't have any issue installing a cab file from the SD card. Also before anyone offers about installing another SD card I tried that also and no haps.
Weird and I am still searching for a solution but again XDA is the spot and researching here has not provided me with a working solution as of now....sssooooo...HELP!? Or not...
Click to expand...
Click to collapse
Look up all of the google registry fixes, and try every single one of them.
If none of them work and the program I recommended doesn't work, backup and hard-reset.
then, when it's done first thing use that program to disable security.
Also, most custom ROMs have security disabled by default.
Well I just went ahead and flashed a new rom and I am good to go...
I have tried your application. Got the same results as lstrike, error when installing CAB file. Also, how am I supposed to edit the registry when I can't run third party programs?
Will flash Miri's ROM soon. Any idea of whether or not that one has security disabled by default?
sigh i got the exact same problem after trying to run andriod.... any luck?
same problem here, did anyone face the problem then resolve it?
I found the solution !
When the error appears just go to marketplace, download the free version of Resco Explorer
(Resco was the first official registry app I found but if there's another in marketplace i guess it will do just fine)
After this open Resco Registry (included in Resco File Explorer) and go to
HKEY_LOCAL_MACHINE\Security\Policies\Policies
Then go to 0000101a and change DWORD Data value to 1
Now every thing is perfect and you can open all of your apps
Good luck !
Thank you, this solution saved my day!
Rat01 said:
When the error appears just go to marketplace, download the free version of Resco Explorer
(Resco was the first official registry app I found but if there's another in marketplace i guess it will do just fine)
After this open Resco Registry (included in Resco File Explorer) and go to
HKEY_LOCAL_MACHINE\Security\Policies\Policies
Then go to 0000101a and change DWORD Data value to 1
Now every thing is perfect and you can open all of your apps
Good luck !
Click to expand...
Click to collapse
Excellent! great work, thank you!
Rat01 said:
When the error appears just go to marketplace, download the free version of Resco Explorer
(Resco was the first official registry app I found but if there's another in marketplace i guess it will do just fine)
After this open Resco Registry (included in Resco File Explorer) and go to
HKEY_LOCAL_MACHINE\Security\Policies\Policies
Then go to 0000101a and change DWORD Data value to 1
Now every thing is perfect and you can open all of your apps
Good luck !
Click to expand...
Click to collapse
Thank you!
Hi, ( i hope this is the right forum for this or if not can someone please help me or direct me to the right now to resolve this) just wondering if anyone(s) out there that had this problem after they had any of the TMOUS HD2 'Driods' hacks installed on a SD card, had it running for a while, then turn off your phone, try to restart and get this error (this is occuring on both the CLRCAD and HARET programs) "The File 'XXXX" cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem preresist, try reinstalling or restoring this file". i have already formatted and reinstalled the files on the SD card and been to most of the forums here about this issue for their resolution. (all with no luck) If there anyone out there with a simple resoultion (hopefully nothing too complex like a reg hack) can you please help me out with this issue. Thanks in advance
You could Google for and then run once its downloaded the program SDA Unlock, it may remove that warning for you.
Today I tried the SD install of ICS as described here: http://forum.xda-developers.com/showthread.php?t=1437463 Used brand new 16GB card, created \\ICS folder, copied contents of the 7Z file; In WinMo File Manager, opened CLRCAD, then HARET - after a green HTC logo, restart to WinMo, tried several times to no avail. OK, just a testing, can try later...
Then I changed the SD card, inserted my original card used with WinMo and restarted WM.
BIG PROBLEM - I'm getting error message whenever running a program now, error msg reads "The file 'some file' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
Searched the forum, found this http://forum.xda-developers.com/showthread.php?t=392087. I have no reg editor installed, tried to install Total Commander but received "Installation ...was unsuccessfull".
What is the reason for this problem? How can I sort it out?
Thanks in advance
Have you an ActiveSync on your desktop PC? Try to use some registry editor that working via ActiveSync. For example "Remote Registry Editor", or look at that post. There is a link to such program.
Dr. Neuhaus said:
Have you an ActiveSync on your desktop PC? Try to use some registry editor that working via ActiveSync. For example "Remote Registry Editor", or look at that post. There is a link to such program.
Click to expand...
Click to collapse
Thanks. Downloadad/installed the CAregeditor on PC, opened registry of my HD2. I cannot change the value, getting "Write error-access denied/Cannot write value data". Any ideas?
Just 2 ideas:
1. "Connect to Device in CeRegEditor -> Tools -> Unlock Registry" (from this post). Or...
2. Hard-Reset
PS:
Some time ago I've used Android from SD, and got exactly the same thing... This caused me to reflash the ROM, but I've changed "0000101a" to "1" right after reflasing (this helped me to forget this problem).
Tried to unlock,still can't change the value. Also tried the other program recommended in the post but no - I cannot install it on HD2 - still the same problem :-(
Hard reset & ROM reflash probably the only way now, what a waste of time with reinstall/config of all the software/tools...
Anyway, thanks for your effort.