Anyone have any ideas on how I can go about cleaning the ear-piece grill? I see some flakes of string/hair, no sure what it is, or just string particles that is stuck there that I'm having difficulty removing. Should I go with the canned air route? Or do I risk blowing the stuff INSIDE the ear-piece and consequently, the phone?
Any ideas are welcome.
i use a lump of bluetack
samsamuel said:
i use a lump of bluetack
Click to expand...
Click to collapse
Interesting. I'll give that a shot. Lawl. I just used tweezers and those seem to work as well, though it couldn't get the tiny non-string particles.
Cheers.
I've usually just been using qtips (lightly dampened, then dry), and just blowing into it with my mouth. I've avoided using canned air just because I'd be worried about damaging the speaker inside. That might not be a valid concern, but I haven't bothered finding out.
sirphunkee said:
I've avoided using canned air just because I'd be worried about damaging the speaker inside.
Click to expand...
Click to collapse
yea, same, i'm not keen on blasting away right inside my lovely toy, no matter what they say about how safe it is.
PoisonWolf said:
Interesting. I'll give that a shot. Lawl. I just used tweezers and those seem to work as well, though it couldn't get the tiny non-string particles.
Cheers.
Click to expand...
Click to collapse
Be really CAREFUL!!!! with tweezers because they can chip and scratch off the black paint thats on mesh type grill
Related
http://www.zagg.com/j/newsletter/zaggfoam_40promo.php?intcmp=email
i dont think so........
wow I want some lol wouldn't let it go near my nexus though.. Anyone tried it on anything?
Its alcohol based and water free so it can't cause shorts, the only damage a cleaner is likely to do
whats the point when your phone will get dirty the next time you unlock the screen or answer the phone when it place on your face? marketing gimmick at it's finest!
xxlikquidxx said:
whats the point when your phone will get dirty the next time you unlock the screen or answer the phone when it place on your face? marketing gimmick at it's finest!
Click to expand...
Click to collapse
Uh... actually dirt and oils build up on devices after prolonged use. Wiping off the phone doesn't take everything off. Using the foam cleaner would take off all the buildup that results from use.
I'd use it...then just wipe it off regularly and use the foam once a month or so to disinfect and take off the grime buildup. Not sure about dropping $20 on it though.
Sounds good...I like my N1 clean & shiny!
I've heard you can just put a few drops of rubbing alcohol on your phone and rub till it dries for 1/100000000th of the price....
Paul22000 said:
I've heard you can just put a few drops of rubbing alcohol on your phone and rub till it dries for 1/100000000th of the price....
Click to expand...
Click to collapse
I bought an adjustable spray bottle... the type with the screw nozzle to adjust from a stream to a mist. A FINE mist of alcohol works great... but foam is nifty. Anyway, I started doing that after trying Pledge for Electronics. It's obvious it's mostly alcohol.
PLEASE HELP
My wife has this phone..(so do i) well anyway she found a way to do the impossible. she broke her headphone jack in the headphone hole. The tip broke and the bottom is logged in the hole. I tried to get some super glue to perhaps stick it together and pull it out..this did not work. I took the back cover off to get more access but still cant get it..any one have any suggestions...now i also have a lot of superglue residue in the hole. is there any way to open this thing and get the rest of the plug out? BTW it is not the N1 headphone but another brand. PLEASE HELP
Is the tip hollow? If so you could try taking a small screw into it in order to have something to pull it out with.
aj
how deep is the remaining part?
the tip is not hollow and the shaft part is broke off under the plastic part.
ok this is not a joke.....
BUT if you are feeling "ballsy"
take your average sewing needle and heat it up with a lighter stove w/e unitll it is red-hot. USE A PLIERS TO HOLD IT
then plunge it into the center of the remenants and let it cool
only try this if there is some plastic left in there.
lol...I will try that...hope it works, how will the needle grip the broken part of the headphone. would it just pull right out.. I need something to grab or grip the broken part....I dont want to break my phone.
Well the poster with the needle idea has the goal of having the hot needle cool with melted plastic from piece that is broke off. Once cool, the hope is that the plastic will adhere to the needle (now completely cool) and allow you to pull it free.
I have some reservations about this idea. How did she break the tip off. Was it a sideways motion? Or did you try to correctly remove the plug but for some reason it was stuck and the tip was left lodged in?
If it was the later of those, the needle idea will do nothing. It may work is it happened the first way I described.
An alternative to the needle idea and potentially more damaging is to take a paper clip, place a small bead of solder on the tip. Avoid touching any of the phones internals with the solder and press that paper clip up against the broken tip. It should not take long to cool. Once it does, it may give the the force you need to pull it free.
Please report back when you have sorted this out. We are all curious.
maybe a little dab of jbweld or gorilla glue, if worst comes to worse of course. It would be much easier if it were hollow.
What about a really strong magnet?
gIMpSTa said:
What about a really strong magnet?
Click to expand...
Click to collapse
You want to stick a high power magnet next to a 530 dollar phone? Are you nuts?!?
The way to take out a broken screw is to drill a small whole in the center and try to wedge the smallest Allen wrench into it.
Maybe that might give you some sort of idea on how to dislodge that earpiece. I know it's not the same thing...but its N idea.
McFroger3 said:
You want to stick a high power magnet next to a 530 dollar phone? Are you nuts?!?
Click to expand...
Click to collapse
And what exactly do you think would happen?
I'm not talking SUPER magnet, but honestly, what component of the phone do you think is in anyway affected by a magnet?
There is a myth that magnets destroy electronics. Sure you can use a magnet to wipe a hard drive (not flash storage, talking magnetic disk) but it takes a SUPER strong magnet with a concentrated beam to do even that.
gIMpSTa said:
And what exactly do you think would happen?
I'm not talking SUPER magnet, but honestly, what component of the phone do you think is in anyway affected by a magnet?
There is a myth that magnets destroy electronics. Sure you can use a magnet to wipe a hard drive (not flash storage, talking magnetic disk) but it takes a SUPER strong magnet with a concentrated beam to do even that.
Click to expand...
Click to collapse
Magnets will not do anything, Blackberry uses one to turn the screen on/off
did you get it out????
Not yet still trying. .already voided the warrenty
I have a small mark on my Camera already, and I've been handling my camera with extreme care this whole week/weekend thus far. I already have a pretty small scratch (not across the lens thankfully?) and I have no idea how it happened! Been moving my phone around very gently.
Is there anything I can do about the tiny scratch, or do I just have to live with it? I get pretty OCD about small things like this, so I need to make sure there's nothing I can do to try and remedy the scratch before flipping out.
Thanks everyone.
Kooper113 said:
I have a small mark on my Camera already, and I've been handling my camera with extreme care this whole week/weekend thus far. I already have a pretty small scratch (not across the lens thankfully?) and I have no idea how it happened! Been moving my phone around very gently.
Is there anything I can do about the tiny scratch, or do I just have to live with it? I get pretty OCD about small things like this, so I need to make sure there's nothing I can do to try and remedy the scratch before flipping out.
Thanks everyone.
Click to expand...
Click to collapse
The Silicone Sleeve sprint sold me for $11 after 25% off (Premier) and Tax lifts it up off any table
Relax. You and everybody else's phone will become dinged up. You are carrying it around with you all day everyday.
You can use the kickstand to keep it off the table or desk and use a case or pouch for carrying.
Use a liquid lens fixer like for glasses.
I cut a little piece from some old cheap screen protectors to cover mine. I'm sure there is some effect on the picture quality, but no current phone is going to compare to a Cannon anyway.
Resisting Lens Scratch
You can always buy a thick rubber washer and glue it around the camera lens. If you do not want to glue it, you can place it in between the cover and the phone. The solution is not fool proof, but it will work nicely to provide extra cushion and space. This solution is easy and cheap. The washer should not be to tight or small in diameter, so it does not interfere with the camera.
Kurt
kurtwoodfin said:
You can always buy a thick rubber washer and glue it around the camera lens. If you do not want to glue it, you can place it in between the cover and the phone. The solution is not fool proof, but it will work nicely to provide extra cushion and space. This solution is easy and cheap. The washer should not be to tight or small in diameter, so it does not interfere with the camera.
Kurt
Click to expand...
Click to collapse
Placing a rubber washer between the battery cover and the phone, would not do anything to keep the camera lens from resting on the surface that would scratch it.
kurtwoodfin said:
You can always buy a thick rubber washer and glue it around the camera lens. If you do not want to glue it, you can place it in between the cover and the phone. The solution is not fool proof, but it will work nicely to provide extra cushion and space. This solution is easy and cheap. The washer should not be to tight or small in diameter, so it does not interfere with the camera.
Kurt
Click to expand...
Click to collapse
I was thinking something along the lines of this. Basically you just need a ring that rests around the lens.
Something similar to this comes to mind. Of course, you wouldn't need to have a new lens on it. Just a piece of metal.
This could be magnetic, or glued. You could probably rip the phone apart and replace the piece with a more protruding piece to do the same, but that's far more intrusive.
I'm sure we'll see commercial magnet like solutions for this. I mean, come on. A small magnetic ring is all we need. Someone is going to bank on that.
Or how about using hoverboard technology so the phone never touches anything, and hovers in midair? Geez people, buy a case.
Jye75 said:
Or how about using hoverboard technology so the phone never touches anything, and hovers in midair? Geez people, buy a case.
Click to expand...
Click to collapse
Why cover the entire phone with a case when you can just put something around the lens?
I don't like cases. I think these devices were made to look and function in a certain way. If they "needed" a case it should have been built more robust.
I've had an iPhone 3G with no case for 2 years. I've also had no regrets.
Phone nudists unite!
ViViDboarder said:
Why cover the entire phone with a case when you can just put something around the lens?
I don't like cases. I think these devices were made to look and function in a certain way. If they "needed" a case it should have been built more robust.
I've had an iPhone 3G with no case for 2 years. I've also had no regrets.
Phone nudists unite!
Click to expand...
Click to collapse
It was sarcasm. I too, like mine naked, the way it was born. I have a leather case on my hip to put it in when I'm not using it. Jabbing at the fact that people actually want an accessory to attach to the camera lens ring just to keep it from touching another surface and getting scratched, like there should obviously be a market for that. Anyone that anal about possibly scratching a cellphone camera lens... I'm surprised they EVER pull the phone out to do anything at all. (again, sarcasm)
Jye75 said:
It was sarcasm. I too, like mine naked, the way it was born. I have a leather case on my hip to put it in when I'm not using it. Jabbing at the fact that people actually want an accessory to attach to the camera lens ring just to keep it from touching another surface and getting scratched, like there should obviously be a market for that. Anyone that anal about possibly scratching a cellphone camera lens... I'm surprised they EVER pull the phone out to do anything at all. (again, sarcasm)
Click to expand...
Click to collapse
Haha yea. It's a camera on a phone... My DSLR is in it's nice cushy case. My phone will reside, albeit tightly, in my pocket.
I put mine in my pocket up until today, when I got my HTC leather hip case. I got tired of the pocket lint getting in the earpiece grill.
Tip: use Scotch tape and a blunt tipped object to get the lint out of there.
Jye75 said:
I put mine in my pocket up until today, when I got my HTC leather hip case. I got tired of the pocket lint getting in the earpiece grill.
Tip: use Scotch tape and a blunt tipped object to get the lint out of there.
Click to expand...
Click to collapse
I've never used one of those before. I always feel like there's a risk of it falling out. Are they pretty secure?
ViViDboarder said:
I've never used one of those before. I always feel like there's a risk of it falling out. Are they pretty secure?
Click to expand...
Click to collapse
It's nice and snug. There's a hole on the bottom for your fingers to push the phone up to take it out. Magnetic flap, no metal button or anything, so no worries about phantom scratches. Stays close to the hip as well, and doesn't feel oversized or anything. Tight enough on the belt that I don't worry about it falling off.
Cool. I'll definitely check that out then. Thanks.
ViViDboarder said:
Cool. I'll definitely check that out then. Thanks.
Click to expand...
Click to collapse
The one I have is from Sprint online: Part Number CFH2258R
I got a case for mine simply because I've dropped my iPod touch a few times and I'm pretty sure it'd be damaged by now if it didn't have a silicon skin, the EVO's camera worried me as well... The silicon skin Sprint sells seems a lil' bulkier than it has to be tho, and the button bumps aren't as defined as they could be (my iPod touch's skin actually made the buttons easier to press, quite the opposite here). I'm waiting for a different more glossy/smooth skin from Amzer to ship before I decide if I'll just go naked or what...
i found cameraphone lens protector circles at a store called daiso near by me. works great
Ok I'm sure you all like to keep your HD2's looking as clean and shiny as i do, however I've noticed a bit of fluff and dust collecting in the earpiece speaker grill. I was just womdering if anyone had found a quick and simple way of cleaning it? I've tried cotton buds, sellotape and air dusters but it wont shift!
Before you suggest it I've already considered shrinking myself down to microscopic size (like that 80's movie with Dennis Quaid) and removing it by hand but thats not very practical.
Cheers.
150 psi out of my air compressor works well
Il remember that next time Im putting some air in my tyres. Cheers.
I use one of the girlfriends unused blusher brushes, and I keep it in the case all the time. A thick brush works best, you can grip the tip and give the grill a brisk brush.
Try one of those little usb vaccum cleaners. They're only a few bucks on ebay and should do the trick.
Yes, very annoying with all the crap that collects in the ear piece speaker grill...
Thanks guys...... gonna go and raid the missus' make up bag for a little brush.....
USB vacuum cleaners......lol thats a new one....
usb vacuum cleaners are just a geek collectable (I would know, I have one sitting on my desk anc passively collecting dust since at least 3 years ago as it is useless for any other use )... anyway, @you who suggested pressurized airflow... don't you worry that it will somehow damage the speaker membrane?
I'd rather go for a very delicate brush
ephestione said:
you who suggested pressurized airflow... don't you worry that it will somehow damage the speaker membrane?
I'd rather go for a very delicate brush
Click to expand...
Click to collapse
I EXACTLY thought the same thing...
Paintbrush! Little one.
A quick blow job works for me
lakeland said:
A quick blow job works for me
Click to expand...
Click to collapse
A 'blowjob' will work for me as well
Im using small paiting brush
Also while I think of it, I use one of those super-duper 'Xlerator' hand dryers at work on occasion to blow some of the dirt out of it.
Dont use a Dyson vaccum cleaner tho I sucked 4 keys off my laptop and what a pain replacing those
Thanks again folks, some strange and ingenious solutions indeed. The small brush is doing the trick but theres still some crap actually lodged in the grill I can't shift. Oh well..... at least I haven't smashed the screen or anything serious ....
This cyber clean gel works well for picking dust out of the ear slot and the USB socket.
http://www.dooyoo.co.uk/pc-accessories/cyber-clean/1348285/
Tm5078 said:
150 psi out of my air compressor works well
Click to expand...
Click to collapse
I wouldn't use that!
I did this once at work on an old phone, and as you know, water likes to form in the pipes when it's not been used in a while in compressors, also you get tiny bits of dirt in the pipes which you're blasting out and through the grill like a soft sand blaster!
Anyway, didn't even notice the small amount of water blasting out until the phone stopped working and i took it apart again to see the whole board was rusty.
Wondering if it was the air line that did it I fired it at a wall for about 30 seconds and saw it forming on the wall and running down.
A quick empty of the compressors drain valve did the trick to stop the water, but I still wouldn't trust it now.
I use a sort bristled (unused) tooth brush on my HD2 now.
Try good old blu-tack.
That or use something like a pin to dislodge the bits then the brush to clear them.
A soft tooth brush may work.
Anyone notices lints and dusts clogging the earpiece grill?
How do you guys clean it?
infamousvincci said:
Anyone notices lints and dusts clogging the earpiece grill?
How do you guys clean it?
Click to expand...
Click to collapse
Air.
How to clean the earpiece grill
infamousvincci said:
Anyone notices lints and dusts clogging the earpiece grill?
How do you guys clean it?
Click to expand...
Click to collapse
18 months later … but now I had this problem too. Fairly suddenly I could only hear a very faint voice on the telephone, only minimally understandable.
So I used a sharp needle to carefully lift the grit off the tiny grill slot at the top of the phone as well as I could. Then I applied a vacuum cleaner to suck out as much dust as possible.
It worked, but what I don't know is the risk of damaging the speaker underneath. Any information on what that looks like would be welcome. Has anybody taken the phone apart and looked?
I recommend the Blue Tac adhesive stuff. It's kinda sticky like bubblegum. Anyhow just smoosh that into the opening(s) & pull back out & repeat as needed. The stuff works beautifully!
equi_design said:
I recommend the Blue Tac adhesive stuff. It's kinda sticky like bubblegum. Anyhow just smoosh that into the opening(s) & pull back out & repeat as needed. The stuff works beautifully!
Click to expand...
Click to collapse
I might also suggest some clay bar. Any modeling clay would do the trick. If you might be thinking about detailing your car in the near future you could a small piece of the clay to remove any dust/lint from the front speaker grill.