Can anyone suggst me how t disable Autosync whn i connect Elf to my laptop..
Pls help it is really pain in the neck!! I want to keep tht option manual.
Thanks..
The Devil_HTC said:
Can anyone suggst me how t disable Autosync whn i connect Elf to my laptop..
Pls help it is really pain in the neck!! I want to keep tht option manual.
Thanks..
Click to expand...
Click to collapse
what do you want it to do instead? There is a file somene posted in one of the forums to disable AS
I just set the phone to connect as a disk drive when I don't want it to connect via AS.
I think this is in settings -> system -> connect to pc. there is an option for always ask as well. i have that ticked so I can decide when I plug it in.
Hope this helps
Stu
Yup i got it.....
thanks Stu...i forgot abt tht option
Related
Need setting to disable "connecting to Sprint #777...." bubble.
Its annoying to see it every time I connect to the INTERNET. Thank you
Yes, I have tried to disable this annoying "Bubble" with no luck. Any help would be appreciated
cpudoc6 said:
Yes, I have tried to disable this annoying "Bubble" with no luck. Any help would be appreciated
Click to expand...
Click to collapse
Go to settings. Then go to sounds. Then go to notifications. Select Internet Connection and then uncheck all the boxes. Thats it.
Good luck
Rob
ptfdmedic said:
Go to settings. Then go to sounds. Then go to notifications. Select Internet Connection and then uncheck all the boxes. Thats it.
Good luck
Rob
Click to expand...
Click to collapse
Thanks, I was having a dumb moment trying to remember how to do this too.
#777 Bubble
Does anyone know where in the registry of the Moto MC7598 you can update this setting so the #777 bubble doesn't flash every time the device reconnects?
Q0596 said:
Does anyone know where in the registry of the Moto MC7598 you can update this setting so the #777 bubble doesn't flash every time the device reconnects?
Click to expand...
Click to collapse
your really asking this in a forum for an HTC device?
Thread closed as it is old and the answer has been given.
anybody have encountered this problem? i'm unable to receive any files through bluetooth, but i'm able to send files to another devices....
P.S
i'm also uses schap's advance config tools which enables my OBEX
Hi there, you should enable receive all incoming beams at connections settings.
of course i did that bro... i use to did that in my previous WM 6.0 helmi's ROM
hi there solved....
sorry guys problem solved.... my bad... WM 6.1 is great...
hi evoluzionne
how can u solve this problem, tell me please...
thanks
somehow, when we activate beam in our comm manager, its actually not turn on your beam.. so to deal with it we should check and recheck the options in settings-beam.. after turn the beam on just turn the bluetooth and try to send files again
evoluzionne said:
somehow, when we activate beam in our comm manager, its actually not turn on your beam.. so to deal with it we should check and recheck the options in settings-beam.. after turn the beam on just turn the bluetooth and try to send files again
Click to expand...
Click to collapse
Thank You. Had the same problem on my gf's tilt after the 6.1 update.
how about registry tweak?
i was thinking about registry tweak for this problem... so if we check the beam icon in our comm manager it will automatically check the 'receive all incoming beam' at the settings-connection-beam...
maybe anyone have managed to do this...
thank in advance
regards
evo
lol, i have been struggling with this for the past 3months, but never really bothered me.. thanks bro..
hey all i was wondering if theres a program or some way to export the threaded sms from wm6.1 to a txt file... or anything that i'd be able to read on my computer
thing is.. i have over 6000 msgs on my phone.. and its slowing down my phone like crazy..
so... all suggestions are very welcome...
Try Jeyo Mobile Companion, its what I use to backup texts ect!
thing is.. i have a problem wit my activesync.. i mean it wont connect but it charges.. w/e.. its not the point.. i just need a program to do it thru the phone not on the computer...
but thanks anywayz...
any other suggestions??
eliran9 said:
thing is.. i have a problem wit my activesync.. i mean it wont connect but it charges.. w/e.. its not the point.. i just need a program to do it thru the phone not on the computer...
but thanks anywayz...
any other suggestions??
Click to expand...
Click to collapse
Tried turning off "advanced network functionality" in "usb to pc" on your phone?
This is an alternative sms client.
http://forum.xda-developers.com/showthread.php?t=328363
I dont think there's a sms >> text converter that will run on your phone, but ill have a look around for you.
Edit:
Try this thread: http://forum.xda-developers.com/showthread.php?p=2207069#post2207069
post #6 might help.
veyka said:
Tried turning off "advanced network functionality" in "usb to pc" on your phone?
This is an alternative sms client.
http://forum.xda-developers.com/showthread.php?t=328363
I dont think there's a sms >> text converter that will run on your phone, but ill have a look around for you.
Edit:
Try this thread: http://forum.xda-developers.com/showthread.php?p=2207069#post2207069
post #6 might help.
Click to expand...
Click to collapse
tnxx alottt.. i appreciate ur help!! =]
eliran9 said:
tnxx alottt.. i appreciate ur help!! =]
Click to expand...
Click to collapse
Your welcome! I hope I managed to help!
Please help. Its that annoying active sync icon in bottom right highlighted in red. Cheers!
try to end the active sync task from your phone's taskmanager..hope it helps..
scorpionrocks said:
try to end the active sync task from your phone's taskmanager..hope it helps..
Click to expand...
Click to collapse
You need to check advanced network functionality in USB2PC. Now it is using classic USB connection.
these are the only options i have
winwiz said:
these are the only options i have
Click to expand...
Click to collapse
Tick the Enable faster......
that has cleared the icon however activesync has stopped working!
Hello!
I have a problem with my hd 2.
Somehow I activated the phone lock, i'm not sure how it happened, as I know where the setting is and I don't recall activating it.
The problem is that I can't figure out how to deactivate it again (the check box "Prompt if phone unused for" is grayed out, can't uncheck it)
I can change the settings, like, how much time before it locks up or what password I want to use, but no disable.
I really don't want this phone lock to be activated so if anyone could tell me what to do to deactivate it i'd be most grateful!
Tried to search the forums for it but couldn't find anything.
Thanks!
try clearing the password fields, and changing the time to 0 minutes, and then see if it'll let you untick the box.
You can disable auto lock with BsB Tweaks. That's probably the easiest method.
http://forum.xda-developers.com/showthread.php?t=589305
MidnightDraven: thanks, I tried that but it won't let me clear the password field, just keeps saying that it's not allowed to keep it blank, even if I set the time to 0.....
johncmolyneux: I'll give it a go
Thanks both of you for replying
johncmolyneux said:
You can disable auto lock with BsB Tweaks. That's probably the easiest method.
http://forum.xda-developers.com/showthread.php?t=589305
Click to expand...
Click to collapse
I tried out this application, and disabled the "auto lock" function, but I still get prompted when I reboot my phone, that I have to type in the phone lock code ?
Seems to have worked other than that....any other ideas as to how I can get rid of it completely ?
I don't know what to say mate. I just set mine to lock and require a pin, but it let me untick the "prompt if unused" checkbox and blanked out the password for me when I did it. It's now back to the way it was.
Have you installed any software recently?
johncmolyneux said:
I don't know what to say mate. I just set mine to lock and require a pin, but it let me untick the "prompt if unused" checkbox and blanked out the password for me when I did it. It's now back to the way it was.
Have you installed any software recently?
Click to expand...
Click to collapse
Weird...
Well i'm using topix ROM which I got from these forums, and only other thing I have installed is the cab that makes the battery shown in %.
Could it be the topix ROM perhaps?
Krawlor said:
Weird...
Well i'm using topix ROM which I got from these forums, and only other thing I have installed is the cab that makes the battery shown in %.
Could it be the topix ROM perhaps?
Click to expand...
Click to collapse
It's possible. Try raising the issue in the thread you got the ROM from. I'm sure someone else would have seen the issue if it is caused by that ROM.
Figured it out
johncmolyneux said:
It's possible. Try raising the issue in the thread you got the ROM from. I'm sure someone else would have seen the issue if it is caused by that ROM.
Click to expand...
Click to collapse
Figured out why it got activated!
When I setup the exchange connection for my workplace must be some sort of security policy, that forces you to activate the phone lock if you want to sync the emails, can't find away around it, but at least the mystery is solved
Thanks again for your help!
Krawlor said:
Figured out why it got activated!
When I setup the exchange connection for my workplace must be some sort of security policy, that forces you to activate the phone lock if you want to sync the emails, can't find away around it, but at least the mystery is solved
Thanks again for your help!
Click to expand...
Click to collapse
Makes sense, and worth noting for future!
Glad to help mate
Hi,
I Have the same issue with exchange.
But there is no other option to disable it? some reg modification?
Hi all,
I've just got my HD2 and it's the first Windows Mobile device I've synced with my exchange server. Had the same thing and it really bugged me but I found a work around. If you're an Exchange admin (or you're in good with those who are), Google search for Exchange-2003-Mobile-Messaging-Part2-Uncovering-Device-Security-Policies - use the first link. You can disable the requirement for a password globally, or you can specify an individual user to exclude from the password policy. I've just added my username in as an exclusion and it works like a treat!
Good luck