I've got an Alltel Touch- I don't want to use it as a phone- I want to use it as a WI-FI internet Device. I think the phone has wi-fi capability- but the Alltel ROM disabled it????.....It there anyway to wipe it and Start fresh w/o the alltel ROM??? When I hard reset it, it immediately says "Alltel is customizing your device", and proceeds to load the Alltel ROM...Help!....Please!
The Vogue has no wi-fi
Look under the ROM section for ROMs...
@Jerry,
As scotttr mentioned, the Vogue has no hardware for Wifi. The Elf (Vogue's GSM counterpart) is the one equipped with this feature.. If you are going to flash something, first make sure that you are flashing onto the correct device or you will break your device.
hi, long time reader, signed up just to post this.
Currently running NFSFAN WM6.5 1.00 Final, wondering if there is a way to substitue bluetooth PAN for Wifi. Can i create a PAN/PANU on my desktop and use it as an internet/isp source for the Vogue?
Thanks in advance, even if answer is flat out no. if it IS no, please explain why? i'm the curious type and would greatly appreciate the additional information, as it might stop me from making future stupid posts.
palasx said:
hi, long time reader, signed up just to post this.
Currently running NFSFAN WM6.5 1.00 Final, wondering if there is a way to substitue bluetooth PAN for Wifi. Can i create a PAN/PANU on my desktop and use it as an internet/isp source for the Vogue?
Thanks in advance, even if answer is flat out no. if it IS no, please explain why? i'm the curious type and would greatly appreciate the additional information, as it might stop me from making future stupid posts.
Click to expand...
Click to collapse
You mean internet sharing via BT from the PC to the device?
Related
Hello, I have scoured and search and read multiple forum posts here about Lokiwiz, Faria's Incredible ROMs and how to downgrade etc etc. But I am still muddled oh a few things.
Firstly:
I have an HTC Wizard from T-Mobile that is SIM unlocked and working on local network with local SIM. I am completely happy with the phone but for the fact that my WIFI does not work.
I have found posts that gave me RegEdit instructions to fix this and they have not worked. I have read through a multitude of pages and posts here and at HTCWIzardWeb on upgrading rom etc and it freaks me out... last thing i want is a brick - as seems to be the expression.
I have the latest release ROMS from T-Mobile per their website.
So:
1. How can i tell if my Wizard is CID unlocked?
2. Is there a way to activate the WIFI without switching to a cooked ROM?
3. Are there other manfuacturers ROMS that I can transfer to that have WIFI enabled?
Simply put I am scared to death of this whole ROM update thing and I am not ashamed to admit it. Down right fearful!!
I am such a noob to the whole PPC thing that if possible I don't want to mess with too much until I get feet a little wet with some simple things. And the last thing I want to Brick my phone...
So if anyone, can help me out and provide some clear concise info about these things, that would be greatly appreciated.
I look forward to getting in deeper with all this stuff, but for now I just need a little spoon feeding.
Thanks!
Rob
Hey Rob,
Soft-reset your phone and on the white screen that flashes up (with the t-mobile logo on it) there should be some letters and numbers in the upper-left hand corner of the screen. What do the numbers next to IPL and SPL read?
if they end with .0001, i'm afraid your phone is a G4 and is CID-locked, my friend...
but don't worry...there are ways around this. I myself have a G4 Wizard (t-mobile) and have been able to flash many different roms (i'm currently using xplore wm6 which is great btw). I believe there's a G4 flashing tutorial in the G4 threads...
but, if you're still too nervous, don't do it just b/c i said it was possible! I don't want to be responsible for bricking your phone!
My phone is G3 per other posts... no .0000x after the IPL and SPL.
hmm...
I used to have the most recent t-mobile rom for the MDA as well... but I never had any issues with the wi-fi... have you tried connecting with many different access points?
or, t-mobile forbid, a hardware issue?
manchoi44 said:
hmm...
I used to have the most recent t-mobile rom for the MDA as well... but I never had any issues with the wi-fi... have you tried connecting with many different access points?
or, t-mobile forbid, a hardware issue?
Click to expand...
Click to collapse
Not sure what it is exactly... just does not connect to any wifi. Read on various forms that T-Mob lokced it off, but nothing seems to have a clear answers...
one post here had a cab that supposedly worked but it did nothing... which made me believe I was not CID unlocked and started me down this whole haunted house of ROM speak...
If you decide you want to try the flashing route to move to a custom rom, here's the thread to read and use to get yourself CID Unlocked and then into the promised land of custom roms
http://forum.xda-developers.com/showthread.php?t=298613
Can't say whether going to a custom would fix your wifi issue (I'd advise you stay away from WM6 roms as Wifi isn't always reliable with some of them). Maybe try Faria AKU 3.3, or Molski 2.3 final as they are good solid custom roms.
Then if you don't like it, you can easily flash back to your trusty T-Mobile 2.26 ROM and be back to known territory.
Good luck!
Appreciate the link and the advice, however, I am still trying to find out how I can I tell if my device is already CID unlocked. That is priority one and surely there has to be a way to tell.
Next I want to know if there is an easy, non-ROM-Flashing way to activate my WIFI. Again surely there are some things I can attempt to adjust this prior to flashing a custom ROM??
After that, if I still can't get the WIFI to work, then I will have to lose the skirt, tighten the ol' jock strap and dive feet first into this ROM flashing world.
So again, first I need to know these things:
1. How can I tell if I am already CID unlocked?
2. How can I try to activate my WIFI (RegEdits?)
Thanks
roback80 said:
Appreciate the link and the advice, however, I am still trying to find out how I can I tell if my device is already CID unlocked. That is priority one and surely there has to be a way to tell.
Next I want to know if there is an easy, non-ROM-Flashing way to activate my WIFI. Again surely there are some things I can attempt to adjust this prior to flashing a custom ROM??
After that, if I still can't get the WIFI to work, then I will have to lose the skirt, tighten the ol' jock strap and dive feet first into this ROM flashing world.
So again, first I need to know these things:
1. How can I tell if I am already CID unlocked?
2. How can I try to activate my WIFI (RegEdits?)
Thanks
Click to expand...
Click to collapse
I have read almost every post in this form, and I remember coming across question 1. The answer is: You can't tell, the best and safest way (so you are less likely to brick your phone) is the follow the procedure step by step (DO NOT SKIP ANY STEPS) in written by Dr. P found here http://forum.xda-developers.com/showthread.php?t=285435 to unlock the phone. If you try to burn a custom ROM without unlocking, you'll have big problems.
Question 2: By default, your phone probably has wifi 802.11G turned off in the reg settings. Only 802.11b is turned on, so unless you have an 802.11b router it will not work. Have you tried this tweak?
• Enable 802.11g 54Mbps
To enable 802.11g set:
HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS "dot11SupportedRateMask"=dword:00000001
and add this key:
HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS "dot11SupportedRateMaskG"=dword:00000008
I used a number of WM6 ROMs and the wifi always worked great, I also used Cingular’s stock WM5 and now I’m Faria’s WM5 3.3 and the wifi always works great! All of the costume ROMs I have used already has this wifi tweak added.
Okay, I tried the regedit and both of those keys already exist and are already set to 1 and 8 respectively. Nothing.
So i guess that leaves me one final option and that is to CID the darn thing and hope to God I don't turf my unit.
Thanks for the help... Any last words of advice/caution/etc. before I dive into this process?
Just read and follow the link I gave you above. Don't skip steps and you will be fine. Its really not that bad, and you will be amazec at how your phone can perform.
Are you sure you're understanding what WiFi is? Do you have a wireless router? Not trying to insult you, but the way you are asking the question infers that you think the phone just comes with wifi that gives you internet access. Wifi requires a wireless access point
If you want internet everywhere, you're thinking of GPRS, which either requires a data plan, or is charged per kilobyte.
Yes, I know what Wifi is. I have a WRT54G Linksys wireless router set to b/g mode. Laptop connects to it without effort. My iPaq 6315 connects without effort. Know my Wizard can do the same, but can't seem to get it to work... which has brought me here...
So I start reading through steps, downloading all the files suggested and preparing to CID unlock and flash a new ROM. But when I get to step 3 of Docs directions, I realize one thing, that I don't really know how to "Flash" a ROM or Downgrade. Now call me stupid if you must, but my searches of the forums keep bringing me back to the same thread from Dr.P. And Step 3, I quote, "3.. Downgrade your ROM to the Button 1.05. Let it go through the whole setup please..." But it doesn't tell you HOW to downgrade!
Okay, you finished laughing and cursing me?
But I am serious about not knowing HOW and deathly afraid of bricking my Wizard I figured it would do no harm to ask and get a full clarification of the whole process.
So if someone could help me out in that regard, that would be greatly apprecaited.
Thanks
Downgrading the ROM is as simple as downloading the file and executing the ROM update utility (RUU). After that, just simply follow the instructions.
RUU is your friend (unless you are on a G4, then you need to be careful with it). But yeah, just download the file and execute it. You'll need to have your phone connected to your computer. It will step you through the process.
I was hoping it was that easy, but gotta make sure... better to ask than to be another poster with a brick
Alright!!! Did it and it worked like a charm!! BUT STILL NO WIFI ACCESS!!! WHAT the HECK!!
So now I search for a custom ROM that might solve this problem.
Any suggestions?
And thanks for the spoon feeding...
How is your router set up, what kind of security settings?
So to make sure all of us have the complete situation down. You can turn on wi-fi, you just can't connect to anyone? Does it list your router? Did you try downloading Wififofum and see if it shows your router on the radar?
BBowermaster said:
How is your router set up, what kind of security settings?
So to make sure all of us have the complete situation down. You can turn on wi-fi, you just can't connect to anyone? Does it list your router? Did you try downloading Wififofum and see if it shows your router on the radar?
Click to expand...
Click to collapse
Router set up in WPA-PSK, dual b/g mode. When I tap the WiFi button in CommManager, it shows the windows loader icon for a few seconds, then shuts off the Wifi. It is not even turning on the wifi. Nothing else on the router is customized... just straight out of the box WPA settings.
I have tried switching to just b and just g to see if that made a difference, but absolutely nothing.
There are 4 secured wireless networks in my complex. My Laptop detects them all. My iPaq 6315 detects them all and connects to mine with no problems. Put the PassKey for my router in the iPaq and presto, no hassles at all. My Wizard... Nada!! When I go to Wifi settings, it does not even allow me to enter info into the settings fields.
Have not tried Wififofum yet... but would it make a diffence if I cannot get my wifi to turn on? This is the thought process that brought me to looking at Custom ROMS. Thinking T-Mob has locked it off or something? I mean when I researched PDA phones and chose the Wizard (T-Mob MDA) I did so because it was wifi capable. And everything I have looked up since says it is.
I have tried the RegKeys and unless I am doing something wrong they didn't change anything.
So I am at a complete loss. So maybe I should try Faria's AKU2 ROM? Or his WM6 ROM? Any suggestions?
Thanks
A few people have intermitten problems like the one you describe, but not constantly. I would just try flashing T-Mobile's official rom first, no cooking, unlocking, etc needed. See if that fixes it.
BBowermaster said:
A few people have intermitten problems like the one you describe, but not constantly. I would just try flashing T-Mobile's official rom first, no cooking, unlocking, etc needed. See if that fixes it.
Click to expand...
Click to collapse
I currently have the latest T-Mob ROM. Just CID unlocked, but there are no other customizations or cooked up stuff done to it.
For further reference, Staying at a friends house, whose running same WRT54G Linksys, but has it unsecured. Laptop connects. iPaq connects. Wizard nada.
So I am left thinking 3 things:
1. Something wrong with the ROM I have (standard tmobile 2.26)
2. Something wrong with the regkeys or other settings.
3. Something is physically wrong with my wifi on my wizard.
Any suggestions (and links) to another ROM known to work with Wifi??
PS Also of note, though not sure if related - Bluetooth works fine on the device. Can communicate with laptop and ipaq via bluetooth.
roback80 said:
So I am left thinking 3 things:
1. Something wrong with the ROM I have (standard tmobile 2.26)
2. Something wrong with the regkeys or other settings.
3. Something is physically wrong with my wifi on my wizard.
Click to expand...
Click to collapse
Here's how it SHOULD work. When you turn on WiFI from the CommManager screen, the icon will indicate that its now on. If that never turns on its either a problem with your rom or you have a hardware issue. At this point you should go grab your latest official rom from your carrier (TMobile 2.26) and reflash it (even if thats what you already have). If you still have the issue then to me its a hardware issue. If you don't believe that and have to further prove it to yourself then go get the official Cingular rom (its on the HTC website just tell it you have an 8125) or get the Wizard Love rom and flash them to see if it makes a difference (but if TMobile ship can't turn it on, the others won't be able to either is my bet). Your only option then is to do a hardware exchange (just make sure you put it back to the TMobile rom.
If that WiFi button in the CommManager does turn on, then at that point your phone will search and then tell you the access point(s) it finds (Both secured and unsecured). If that doesn't happen then most likely its a hardware issue.
First, I'm sorry for what might be an obvious question to many of you out there. I've been struggling for quite a few hours to setup my X7500 as a modem for my laptop. Most of what I've found, though, directs me to the "Modem Link" software. Although, it doesn't seem to be installed on the X7500.
The reason I'm asking this now is because Cingular/AT&T didn't have 3G in the Detroit area until recently and my Universal couldn't use it due to it's 2100Hz frequency. I know some of you have done this, so I'm hoping someone can point me in the right direction.
Also, I'm wondering if the Modem Link software will be in the WM6 build in the next couple of months.
Thank you in advance for any help you can provide.
In WM6 you will have internet connection sharing, replacing the modem software. Really neat!!
There's an app on the Ameo that does just that. Two clicks / taps and you're away. Is that not included with other models of the phone?
Ant
Is the app "Modem Link?"
I'm guessing the application you're referring to is Modem Link? But unless I'm blind I haven't been able to find any reference to it on the Advantage. It looks like my best bet may be to wait until WM6 and hope HTC includes the software in it's version of the ROM upgrade.
Thanks ... also I have to say this is by far the best "PDA" I've had. Everything so far has worked very smoothly compared to my Universal, which every new piece of software was a new adventure in agony. The massive amount of memory and the large screen are much appreciated.
internet connection sharing is in wm5 too!
As Anton.Valleyman stated it takes two taps.
In the programs folder on the ameo is where it is found,and i cant see why HTC would leave it out of their wm5 rom.
If they have then that is taking the mickey!!!!
Hi All,
New reader/lurker and I'm a bit overwhelmed. I'm technical by nature but nothing to do with phones so I think all the nomenclature I see is so foreign to me that I'd love to read a primer or FAQ or anything to help me get up to speed.
My goals (I have a stock XV6800 from VZ for about 6 months now):
I want to tether this to any laptop and make it easy to do so. The only options under Verizon to do so without paying extra I have found are using the modem application (ugh) via this thread or using a DCD I found out via this simple thread on these forums.
I prefer to use the clean Internet Connection Sharing method so it seems I would need to upgrade to some DCD or other...if I only knew what that was and all the steps, considerations, options, pitfalls, etc. in doing so are.
Can someone point me to a guide for a Verizon XV-6800 that might make this possible, or what documents I need to read to get up to speed, where I can find the media, etc?
It feels a bit overwhelming to get bits and pieces of info but not enough to feel comfortable taking the first real step.
/noob
Thanks!
Well, to help others, since no responses...after scouring the 'net for much time, I found these two links which should help, and I'm temtped to use the short version but will read the other one for completeness:
http://ppc.stoleyour.net/xv6800/
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
If there is any other Verizon specific guide or something that might help a first timer, please point the way! I dig learning about all this.
There really isn't any carrier specific documentation. Just run the Verizon carrier CAB when you get done with the ROM. Just unlock, radio rom, Windows ROM, the carrier CAB. Then tethering is cake. Run the prog, click on connect and then connect it via USB. Windows XP thinks it is a network card and will do the rest. Works great.
Hi All
I need some help with my HD2.
Today I upgraded from stock rom to latest as version as on HTC website
I can't recall old version, anyway I am having an issue with this radio version which is 2.07.51.22_2
My exchange activesync keeps disconnecting, so my emails are arriving 3-4 minutes later.
I guess my question is?
Can i go back to older radio version without flashing, or worse case scenario could i downgrade to older rom?
I need some help guys.
Thanks
I am downloading now... Will try when down.
I cannot help you there, but have you tried sending a SMS? did you get a stupid notification of message being sent? I am trying to figure out a way to deactive.... No luck yet, waiting for HTC response
As for the Data sync I have had no issue as yet. I have found it a tad more reliable than 1.49. But I have only done a whole 2 hrs of testing
tmorgan4 said:
As for the Data sync I have had no issue as yet. I have found it a tad more reliable than 1.49. But I have only done a whole 2 hrs of testing
Click to expand...
Click to collapse
What a pain, so yours work ok, do you use activesync with an exchange server?
That's where my problem is.
It disconnects every few minutes, which obviouslyconsumes more battery power.
As for the sms sent notification I dont mid it.
I may downgrade to original rom, is it safe?
Thanks
host12 said:
What a pain, so yours work ok, do you use activesync with an exchange server?
Click to expand...
Click to collapse
Sorry I should have clarified. I link mine with my Exchange 2010 Server. I am getting emails as wanted.
That said I still can't sync SMS. Which is soemthing HTC is looking at and I haven't heard back in a while. I should email them to chase them up.
Hmm, I may try a hard reset tomorrow then.
Thanks
host12 said:
Hi All
I need some help with my HD2.
Today I upgraded from stock rom to latest as version as on HTC website
I can't recall old version, anyway I am having an issue with this radio version which is 2.07.51.22_2
My exchange activesync keeps disconnecting, so my emails are arriving 3-4 minutes later.
I guess my question is?
Can i go back to older radio version without flashing, or worse case scenario could i downgrade to older rom?
I need some help guys.
Thanks
Click to expand...
Click to collapse
Hi there, having exactly the same issue, did you find a solution to this other than changing out the ROM? Greatly appreciate your posts.
Telstra ROMS on HD2 are stuffed!
I've heard from a mate who works in Telstra ROM development that the HD2 images are not fully tested.. and therefore go to market with communications flaws.. eg every time you try and sync your mail or use as a shared internet device it struggles as the radio version is substandard to the rest of the Image.
Do yourselves a favour.. HSPL it... Find one of the wonderful roms that the guys/gals on here do.. and you will love using the hardware you have purchased. The HD2 is so powerful and should not be ruined by Telstra's lame attempt at a ROM.
Seems they have put way more effort into the Android ( desire ) but its still no HD2.
englundm said:
Hi there, having exactly the same issue, did you find a solution to this other than changing out the ROM? Greatly appreciate your posts.
Click to expand...
Click to collapse
Yep fixed it, apologies forgot to post solution for my issue.
After trying reflashing with new ROM, downgrading to old ROM and still having same issue, that's right after downgrading...
It clicked, see I bought device and started using activesync after about 2 months.
Before that, I had an issue with my 3G internet connection not working at all.
Weather updates, internet access, hotmail emails etc.
To fix that other issue I had to create a new internet connection.
By the time I got to use activesync I had a new internet connection, I was not using stock telstra connection.
Therefore to fix on new ROM version I created a new connection, and magically started working up to now with no issues.
And it is true telstra are bloody hopeless at testing pre-releasing ROMs.
If you need more information let me know.
Thanks
Would greatly appreciate any help in two areas:
- firstly my HD2 internet stuff is nor working at present. Clicking many of the BigPond links just brings up IE with wap.telstra.com/wap?..... and ends up just sitting there until timeout. Can you post details for setting up new internet connection that fixed this.
- which ROM did you go to. Hw did you load this. I cannot get my HD2 to connetc to Win7 x64 WMDC. Can't even see any mention of the device in the device mgr, though it did say it saw it at ones stage. Reading numerous posts - seems to be a lot of people having issues in this space..
hylandgj said:
Would greatly appreciate any help in two areas:
- firstly my HD2 internet stuff is nor working at present. Clicking many of the BigPond links just brings up IE with wap.telstra.com/wap?..... and ends up just sitting there until timeout. Can you post details for setting up new internet connection that fixed this.
- which ROM did you go to. Hw did you load this. I cannot get my HD2 to connetc to Win7 x64 WMDC. Can't even see any mention of the device in the device mgr, though it did say it saw it at ones stage. Reading numerous posts - seems to be a lot of people having issues in this space..
Click to expand...
Click to collapse
Ok.. have to say, the wap.telstra addresses are all old and many are discontinued. All those apps are simply web shortcuts that should point to a m.bigpond address.
Firstly.. you need to do a few things..
1) You will need to HSPL your phone- ( like flashing a bios ) I just used the hspl.zip.. Instructions are easy and straight forward, make sure you follow them perfectly.
2) Flash your radio to something better i did the 2.10 ( Again.. instructions need to be followed.)
3) I then had a look and found a rom on the forum ( energy GTX ) which seems to have all i want and is fast.. after you flash it.. reboot it.. and it will autoconfigure to the Telstra network.. and BINGO.. FAST Phone!!
host12 said:
Yep fixed it, apologies forgot to post solution for my issue.
After trying reflashing with new ROM, downgrading to old ROM and still having same issue, that's right after downgrading...
It clicked, see I bought device and started using activesync after about 2 months.
Before that, I had an issue with my 3G internet connection not working at all.
Weather updates, internet access, hotmail emails etc.
To fix that other issue I had to create a new internet connection.
By the time I got to use activesync I had a new internet connection, I was not using stock telstra connection.
Therefore to fix on new ROM version I created a new connection, and magically started working up to now with no issues.
And it is true telstra are bloody hopeless at testing pre-releasing ROMs.
If you need more information let me know.
Thanks
Click to expand...
Click to collapse
Hey there, thanks for this. With the new 1.72 ROM the Telstra inbuild connection set ups seem to work, can browse internet and activesync will connect when I prompt it OK (with 1.49 I had to setup a new connection with Phone line (GPRS) and telstra.wap manually (via the Telstra tech's)). I have two HD2's one running 1.49 (with this manual config) and the other 1.72 with inbuilt Telstra config's - the delay problem u described with email arriving 3 or 4mins later is still happening on 1.72 despite it appearing to connect fine, almost like the message from the exchange server is being ignored. Watching Activesync on the 1.72 when I know there is new email and there is this odd sequence, seems to check and recheck emails 2 or 3 times when just one new email has arrived but doesn't seem to pick up the trigger from the Exchange Server that new email has arrived? Does this delay still happen for you, what connection configuration did you select? Thanks v.much.
I want to know what are the real benefits or improvements on upgrading the ROM on Telstra branded HD2? Because I bought an new, unlocked HD2 from a clearance shop in Melbourne and had been into it for just 2 days. Bening a long time WM user, I got used to it and it really seems to work without any problems at the moment, so does the new ROM brings some dramatic improvements, new and fanastic functions or what? I am not after cosmetic things at all, need to know real benefits comared to old ROM.
rxsoob said:
I've heard from a mate who works in Telstra ROM development that the HD2 images are not fully tested.. and therefore go to market with communications flaws.. eg every time you try and sync your mail or use as a shared internet device it struggles as the radio version is substandard to the rest of the Image.
Do yourselves a favour.. HSPL it... Find one of the wonderful roms that the guys/gals on here do.. and you will love using the hardware you have purchased. The HD2 is so powerful and should not be ruined by Telstra's lame attempt at a ROM.
Seems they have put way more effort into the Android ( desire ) but its still no HD2.
Click to expand...
Click to collapse
Thanks, almost sold on this path at this point given the headaches, was reluctant to head down this HSPL path, is there a good reference for setting up a custom ROM specifically for Telstra's network?
Activesync usually never works with the standard Telstra connection in the HD2 Telstra ROM.
As far as im aware, it is set up to go through a Telstra proxy server, which doesn't allow the Activesync traffic.
You must set up your own stock standard connection to telstra.internet APN. Which bypasses the proxy that they have on their preloaded connection. You will however not be able to use the Telstra internet shortcuts to My Account, BigPond etc, as they require authentication with their proxy server.
So as far as I have found, with the stock Telstra HD2 ROM its a case of either one or the other: your activesync working, or your Telstra links working.
englundm said:
Thanks, almost sold on this path at this point given the headaches, was reluctant to head down this HSPL path, is there a good reference for setting up a custom ROM specifically for Telstra's network?
Click to expand...
Click to collapse
I'd like a response to this too as I'm looking at HD2 Android and need a radio upgrade from for it to run, but don't want to lose Telstra Rural coverage. The HD2 is a great device, but few Winmo6.5 app developments compared to Android or iphone.
I am new to phone flashing, but after all my reading I am so confused! That I have to ask for help. I want to run a Vogue on Reachout wireless it has to be CDMA so Vogue will work I do not think there is a Data Plan through them so I need GPS which Upgrade WORKS? And going to try Wifi SPEC TEC Mini SD Wifi card SDIO WLAN card if I can make it work. I am going through Interferon treatments and am very broke or would pay for service, Any Help would be Appreciated.
Current phone settings
Rom 1.15.605.14
Rom date 03/10/08
Radio 1.60.30
You'll definitely need to update your radio for GPS to work. While at it, might as well upgrade your ROM. Here's a good starting point:
http://forum.xda-developers.com/showthread.php?t=592964
Thanks
Thanks for the response
Well I read this before and wondered if the roms are current enough or if I should use something else. Also saw this link
http://forum.xda-developers.com/showthread.php?t=533639
wondered which would be better
Progress With GPS
Well I managed to upgrade NFSFAN's WM6.5 1.00 FINAL ROM ! After reading and figuring out the steps, I must of read for a week . Radio now at 3.37.10 and GPS is working but not locking very fast at all! But will lock. Any way to better the performance a little
perhaps by using QuickGPS could accelerate the GPS work