Can't flash in recovery mode - Click General

When i boot into recovery mode it looks all normal (home and power). I can move up and down to highlight things but when it comes to selecting them the middle select button won't select them. What is up??
Update: I installed it but it was stuck on TATTOO boot. I have factory restored and currently waiting for it to go into setup

Have i bricked my phone as it isn't booting past TATTOO

Did u make a nandroid backup or wasn't this possible also?
I would say download Original HTC ROM from htcpedia and try to flash this one (it's a setup file which you just have to execute from your PC, which then tries to flash the stock HTC ROM...cross your fingers that it'll work...:/

JackStoreytime said:
..when it comes to selecting them the middle select button won't select them. What is up??p
Click to expand...
Click to collapse
You need to use green call button.

I have tried a few tutorials to install ROMS. I worked out i have to use the green call button a while ago. I use the Nandroid backup but i can't seem to flash any ROM. I couldn't use OpenEclair 1.3, AzusaROM and Fyodor and non work. Something doesn't seen right

I tried installing the Fyodor rom again and it just hangs still. I did a Nandroid backup (my phone worked as i did the phone install ROM) and wiped the phone to factory reset. Then i Flashed from .ZIP file and restarted it. What have i done wrong? I can't load ANY rom.
Edit: I tried the Azusa ROM again and it has loaded to the point where you can see the full picture of the girl in the picture. I don't want to use this rom but this is the only one that works... So far
Edit 2: I have Azusa working Fine. But it is not what i desire.

Related

[Q] Help please... Very large problem with boot

Hello XDA...
This is my first post, but I have come across a problem with my relativly new Vodafone HTC Legend. I had Cyanogen android 2.2 running on my device, and I used ROM manager to upgrade to the Cyanogen Mod's nightly builds. I created a backup during the ROM instillation, and received a warning saying there may not be enough space on my SD card to back up the existing ROM, but i continued with the backup. It then displayed backup successful. After a few days of use of the newest Cyanogen mod's Nightly build i decided to revert to my old OS using ROM managers restore from backup function. ever since my mobile will now longer load any further than the HTC logo.
What I have tried so far:
-Holding the back key while pressing the power button... and the result:
something called boot loader, which displayed a menu of 4 items... BOOTLOADER, REBOOT, REBOOT BOOTLOADER & POWER DOWN. After selecting bootloader the next menu freezes while and then displays green writing mentioning something about no image, but removes itself from the screen to fast to be read. The new menu is composed of... FASTBOOT, RECOVERY, CLEAR STORAGE & SIMLOCK. Following instinct I pressed recovery, the HTC symbol is then displayed again, and then a black screen with the image of a phone similar to the HTC hero, with a red triangle and a exclamation mark.
Any help you can provide would be exceptional. Sorry for my lack of knowledge.
Many thanks
Stephen Gray
Hi Stephen,
If you are stuck like this, the best thing to do is a FakeFlash. It launches ClockWork Recovery - then use nandroid to restore again.
If that fails, there is still a way to recover I think.
If you install the ROM you were using before and the data.img file is OK, you can install the ROM as if installing new ROM, then in nandroid choose Advanced recovery and recover "data"...That should recover your system to it's previous state... of course if your data.img is corrupted, you'll have to set everything up...
Thankyou
All I can say is... i owe you my life... I even have all my pictures still! Brilliant!
Great! Just click thanks that's all I need

HTC Tattoo bricked? Doesn't boot, goes to fastboot...

Hey!
This is the issue: when I try to turn the phone on by just pressing the red button it goes directly to the fastboor menu. If I try to go to the recovery from there shows "TATTOO" for hours. If i try to go to the recovery dirctly by pressing HOME+ red button, it firsto shows the fastmenu for a second and tries to boot unsuccessfully. During this boot tries, I try to get some info with adb logcat, but the device is not casting anything. And well, if a picture is worth a thousand words, I guess a video is way better:
youtube.com/watch?v=zAejyMIVNGk (newbie, no urls!)
sorry for my english
And well, I have no idea how I got to this, this used to be my phone, but I bought a Nexus One and gave this to my sister, who has no idea what happened (as usual). Oh, this morning somehow I managed to get to the recovery menu, and booted until the android bootscreen, then vibrated and died again. I got to the recovery again, made a nandroid backup and wiped all data, it booted successfully, but the rom had no home application and ran really bad.
I was about to try to make a goldcard and install the stock RUU rom, but if I have no adb I cannot make one...
Any idea?
PS: the rom was nFinity 1.18 (2.2 Froyo) and the recovery was the lastest Clockwork.
PS2: I just realized that in every place I say fastboot I mean HBOOT, sorry again
sounds like recovery is still there, if you hold home + menu when phone if off , and then click red power button you should get recovery menu.
Then hopefully you can try full wipe and install a rom , rember the first time u boot a rom might take a few minutes
let me know how it goes
Yup, not using that method but I can manage to get to recovery sometimes. I'm trying to flash another ROM, but for some reason it doesn't let me. I've tried KalimochoAz (gingerbread) and HDCR (donut) and says something about assertion failed when checking if the device was click on the first case and in the second, complains about unsupported stuff...
I was about to try another roms by random but the SD does not refresh or even mounts, there must be something really messed up with this phone...
You can try to flash your stock rom from fastboot.
You don't need a goldcard, just run the update utility on pc, go to your temp directory and take the rom.zip file, rename it to CLICIMG.zip, copy it to sd card, put card on device and on fastboot menu pres vol down to start flashing the rom. I is the same version with the rom that device has before rooting, you will not get any errors.
I think there's a little misunderstanding here, mainly because of my confusion, it's not the fastboot menu qhat I get, but the HBOOT menu, and pressing the back button in order to access fastboot doesn't work...
oh I managed to boot something, I renamed the RUU exe to CLICDIAG.zip, because I could not find anything in C:\temp (is there where I have to look for the file?)
anyway, the zip appears to load on the phone, but once the progress bar completes, nothing happens... In my computer, the zip contains a .txt file and boot.img, but appears to be corrupt, and cannot extract any file (obviously, it's an exe)
so what do I do?
manutenfruits said:
oh I managed to boot something, I renamed the RUU exe to CLICDIAG.zip, because I could not find anything in C:\temp (is there where I have to look for the file?)
anyway, the zip appears to load on the phone, but once the progress bar completes, nothing happens... In my computer, the zip contains a .txt file and boot.img, but appears to be corrupt, and cannot extract any file (obviously, it's an exe)
so what do I do?
Click to expand...
Click to collapse
Of course will not work like this.
You must first run the RUU utility on pc and while is open to search your temp directory(maybe is inside another folder) for rom.zip file. This is the rom, the executable is an installation program which contain the rom and the app to flash the rom from pc packaged. You need only the rom.zip for flashing from sd card.
I've looked in the whole hard disk for that rom.zip after executing the RUU (I cannot get further than the step that tries to detect the tattoo, failing, so maybe it's not even created).
Apart from that, I managed to boot twice to what seems to be gingerbread, nFinity 1.18, but says in the lower left corner "Safe Mode" and I have no home application, no action on any button, just the notification bar and the lock screen. ADB doesn't work either.
manutenfruits said:
I've looked in the whole hard disk for that rom.zip after executing the RUU (I cannot get further than the step that tries to detect the tattoo, failing, so maybe it's not even created).
Apart from that, I managed to boot twice to what seems to be gingerbread, nFinity 1.18, but says in the lower left corner "Safe Mode" and I have no home application, no action on any button, just the notification bar and the lock screen. ADB doesn't work either.
Click to expand...
Click to collapse
You don't need to go so far. Just run the ruu utility and when the first screen appears go to temp dir(c:\users\you user's name\local\appdata\temp on windows 7). The executable is an encrypted package and when you run it extracts all included files and then starts the installation program. These files will deleted after this program exits(when the installation complete or an error occurs)
Cool! I just renamed it to CLICLIMG.zip and I finally loaded. The problem now is that when it finishes, instead of asking me to flash it, says
"CID Incorrect!
Update Fail!
Do you want to reboot device?
<ACTION> Yes
<POWER> No"
While running the RUU I made sure that it was for HTC Tattoo since it showed me the device during the steps. And I got it from a post describing the steps to flash it using the goldcard.
Furthermore, this error is something similar to what happened when I tried to flash from the recovery. This is REALLY weird...
Probably this isn't the sama as your device's stock rom. I think goldcard needed for flashing any htc original rom, but without goldcard only the device's version will be flashed successfully. Try to download other original roms if you don't know which you had before.
Here is a site with shipped roms for tattoo:
http://www.shipped-roms.com/index.php?category=android&model=Click
The RUU wasn't a problem, I tried now with a goldcard and flashed successfully! I could not get ADB connection to make it, but I once made one and still had the .img in my mail inbox.
But still nothing has changed...
pressing on drives me to the HBOOT screen, whose only options that work are "simlock" to flash CLICIMG.zip, and recovery (freezes on "TATTOO")
EDIT: does not freeze, but goes back to HBOOT after a while... ¬¬
You say that now you have the stock HTC rom and again you cannot boot it and instead the device reboots again to HBOOT?
Then maybe you have a hardware problem which leads to this behaviour.
OK, now I guess it still has warranty, but the problem is that I rooted it.
But now that I flashed somehow the original rom, should be no problem right?
Yes, if you successfully flash the stock rom, you're not root any more.
had that problem to, but theres easy fix for it without doing all whats being sayd here
Even tho phone dont boot annymore and stays on logo plug in the usb cable
and work with adb shell and reflash recovery (to be good tattoo-hack.ko etc tricks need to be done before doing it or you get errors)
http://forum.xda-developers.com/showthread.php?t=716282 step 1.5 and tools from step 1.3
and ether get Amon RA recovery or clockworkmod and use
Code:
./flash_image recovery /sdcard/recovery.img
then reboot into recovery
HTML:
adb shell "reboot recovery"
mount usb put in a custom rom and flash it
if all done well should work (had same problem)
bascly adb still work even if you think you bricked phone just have to let it "startup"
Greetings
I'm afraid that won't work. I've been trying all the time with adb logcat and adb devices unsuccesfully. I thought that the TATTOO bootscreeb would give me some feedback in all cases, but now doesn't seem to work...
I've had similar problems when trying to flash nfinityGB.
My problem was that I missed something on the way from
- creating a gold card
- rooting device
- installing recovery
- flashing rom
All I did was to download and execute "RUU_Click_HTC_WWE_1.67.405.6_WWE_release_signed_NoDriver.exe" (or any other ruu).
Be shure to have SDK with all drivers installed properly.
After this your device is in unrooted (original) state as dancer_69 already told you.
Now you can decide whether to claim warranty or properly follow the guides on xda to get root and flash custom roms.
I think I know from long ago what is happening here, just couldn't believe it. Maybe the keys are sticked or something, that would explain the always going into fastboot mode without pressing the VOL DOWN key. Now it boots 1 out of each 5 tries, and when it gets to the home app, it's on "safe mode" (achieved by pressing MENU key while booting).
I think they will take care for it back in the HTC support (well, I hope)
manutenfruits said:
I think I know from long ago what is happening here, just couldn't believe it. Maybe the keys are sticked or something, that would explain the always going into fastboot mode without pressing the VOL DOWN key. Now it boots 1 out of each 5 tries, and when it gets to the home app, it's on "safe mode" (achieved by pressing MENU key while booting).
I think they will take care for it back in the HTC support (well, I hope)
Click to expand...
Click to collapse
Something like this thought when I said that maybe is a hardware problem.

Streak Boot Issues Cant Restore Stock Recovery or Boot ROM (Bootloop)

Hiya all, I am quite desperate for help, I consider myself intermediate when it comes to dealing with android devices but I am well and truly stumped on this one.
I received a second hand streak from eBay yesterday, turned on first time and booted fine, running Steakdroid 1.9.0 by DJ Steve. I had a few issues with it reboot randomly or crashing, as it had Streakmod Recovery installed I did a full wipe all areas, reinstalled the Rom 1.9.0 and bit a factory reset on reboot from the Dell recovery menu.
All the device does now is reboot in bootloop on the dell logo it stall when it goes as far as booting or trying to load the Rom.
I ran the test in fastboot to test the internal drive as this is known to fail and both that and my SD memory passed the test.
I used fastboot and CMD to flash 4399 recovery image the OEM recovery image for the Rom Streak_104_4399_21.pkg I renamed this to update.pkg and rebooted the device into recovery where I then went to restore the original firmware (1.6) but as soon as I pressed the camera button to proceed I was greeted with a lovely black screen.
I left the device for about 2 minutes where it reset itself and just keep rebooting on the dell logo the restore did not seem to work, just to check fastboot and CMD was working as it should I went to reinstall the Streakmod Recovery image and sure enough it worked I managed to boot the device back into streakmod.
Unfortunately every time I try to install a custom rom they just do not seem to load the device simply stalls on the Dell logo because I cant seem to restore the original recovery image for the stock rom I cannot factory restore and nor will any custom rom boot.
All I have is access to fastboot and Streakmod recovery aaaah!!
If anyone can help me in the slightest I would well very, very, very much appreciate it!
As you have fastboot working, go to the wiki and download the recovery.img for the latest 360 rom, put the corresponding rom on your sd card named update.pkg and try to do a recovery by powering on device holding down volume up and down.
Flash then do a factory reset and you should be fine.
Streakmod is a great tool for flashing custom roms, not too many problems using custom roms, but you must use Streakmod with care, never use the factory reset option from within streakmod itself, this can render your phone a brick.
(InsertNameHere) said:
As you have fastboot working, go to the wiki and download the recovery.img for the latest 360 rom, put the corresponding rom on your sd card named update.pkg and try to do a recovery by powering on device holding down volume up and down.
Flash then do a factory reset and you should be fine.
Streakmod is a great tool for flashing custom roms, not too many problems using custom roms, but you must use Streakmod with care, never use the factory reset option from within streakmod itself, this can render your phone a brick.
Click to expand...
Click to collapse
Thanks for the reply here's my progress so far:
Flashed recovery image and loaded rom to SD card..... Booted into dell recovery and this is what happened
Finding update package
Opening update package
Verifying update package
Yellow bar 25%ish at this point
flashing lights
Installing Update
33%ish lights flash again
Yellow bar jumps 3/4 then fills screen, streaks screen goes blank/ off
Doesn't reboot/ cant turn on so I remove battery and switch back on and I am back to Dell logo then I get a picture of an android and another small progress bar that slowly fills and the device and it again reboots
Streak reboots again about 3 times like it is stuck in bootloop, I leave it and keep my fingers crossed I then get an animation of the Dell logo and glowing lights behind it.
Keep fingers crossed and sure enough it boots into the lock screen, I go to unlock it but it freezes and I get the flashing lights syndrome and the screen goes blank
Remove battery and switch on again, dell logo bootloop after about 8 or 9 bootloops it boots back up into the ROM above but then crashes once again...
Is it fair to say this streak has given up the ghost?
Flashing lights could mean baseband mismatch.
Try again, but be certain to use the correct recovery.img for the rom you are flashing, get the 351, 354 or 360 recovery.img that matches your choice of rom.
Make sure there is only 1 update.pkg on your microsd card, the one you want to flash, move all others, rename them or delete them. The Dell recovery always looks for update.pkg, nothing else.
Flashing lights could be something more major, but i still think its a baseband mismatch.
(InsertNameHere) said:
Flashing lights could mean baseband mismatch.
Click to expand...
Click to collapse
Honestly thats what I wanted to hear but what worries me is I downloaded the recovery and image from Wiki both relating to 360 will try flashing again I really do hope it can be fixed! Seems today is not a good day for me today many things going up the creek!
I am 75% certain if you flash it with the right update.pkg, that is a renamed 360 pkg you downloaded, you will have success.
When you flashed Streak_104_4399_21.pkg you were trying to revert to Android 1.6.
You may have to use the QDLTool to fix the Streak. I am not sure what problems trying an 1.6 build over an Android 2.2 build can cause. You may want to wait for some more feedback.
Start here for more info and try the links in my signature.
I dont believe you can downgrade directly from 2.2.x -> 1.6.
2.2.x -> 2.1 -> 1.6 might work but why are you doing this in the first place?
Just directly install 360 or the like
teaganravetta,
Does this sum up your situation?
1) you bought a used phone and it had StreakDroid 1.9.0 on it
2) because of issues with SD 1.9.0, you tried to flash Streak_104_4399_21.pkg, not realizing that SD is based on a newer stock rom
3) you then tried flashing bb 360
3) Now you are having issues with boot loops and phone won't boot?
marvin02 said:
teaganravetta,
Does this sum up your situation?
1) you bought a used phone and it had StreakDroid 1.9.0 on it
2) because of issues with SD 1.9.0, you tried to flash Streak_104_4399_21.pkg, not realizing that SD is based on a newer stock rom
3) you then tried flashing bb 360
3) Now you are having issues with boot loops and phone won't boot?
Click to expand...
Click to collapse
Yes thats exactly what happened and in that exact order I am guessing this means the worse, am going to try for the 3rd time now reflashing 360 so fingers crossed
teaganravetta said:
Yes thats exactly what happened and in that exact order I am guessing this means the worse, am going to try for the 3rd time now reflashing 360 so fingers crossed
Click to expand...
Click to collapse
I'm not going to tell you anything different than anyone else, however I am going to give you links to the exact files you need so there is no confusion.
Download this:
http://mirror2.streakdroid.com/manii/360/recovery.img
This is the recovery image for 360. Save it in the folder on your computer that has fastboot.
Now download this:
http://mirror2.streakdroid.com/manii/Streak_360_17397_00.pkg
Rename this to Update.pkg and place in the root of your SD Card. (ensure there is no other Update.pkg on your card)
Power off the phone, if not done already.
Hold the power and camera button down until you get a white screen. Click on fastboot on your phone. Wait 10 seconds.
Plug it into your computer with the usb cable.
Wait for it to say fastboot ready (or something similar).
Now flash the recovery.img using the following command (This command assumes a Windows PC):
fastboot.exe -i 0x413 flash recovery recovery.img
When both your computer and the phone says it was successful, complete, or whatever, pull the battery.
Replace the battery, hold both volume buttons along with the power button.
In the menu that opens, choose the second option. Let us know your results.
I only added this post in case their was confusion over which files were actually needed. No need for a separate baseband, dsp1, or anything else. These are all included in the pkg file.
many thanks for all the help, so far I have downloaded "QDLTool3rd_20101022_GAUSB1A130500" turned off driver signing as I am x64 all ADB drivers fine and COM ports okay have restored via this tool according to the log successfully.
Phone rebooted a few times it has paused on the Dell logo for a moment but the guide did say anything up to 10minutes for first boot so I am holding for the moment to see if this has cured it otherwise I will report back and re download the above files and try that!
It takes me a while because I am out in the sticks I only have a 60kbps download speed (yikes) I know!!
Because your first attempt at flashing a stock ROM was the Android 1.6 version I am not sure you can just flash 360 at this point. I think you have to use the QDLTool (repairtool), but I am not sure. Try searching for the procedures that were used to upgrade from 1.6.
Edit to use the QDLTool:
In this post DL under commonly downloaded tools get Fastboot/ADB utils + drivers for Streak 5/7 and Venue and QDL Tool.
Then download qdltool-tutorial.zip from this page. unzip the tutorial and open it with a browser that supports flash or other flash viewer.
After using the QDLTool let the Streak boot and then flash the 360 recovery file and the 360 ROM. You must not let the phone boot completely after flashing a different recovery or the phone will restore the one that came with the ROM currently on the phone. Read this.
You can find more info about QDLTool by searching. As I said I think that is what you need to do.
lordmorphous said:
I'm not going to tell you anything different than anyone else, however I am going to give you links to the exact files you need so there is no confusion.
Download this:
http://mirror2.streakdroid.com/manii/360/recovery.img
This is the recovery image for 360. Save it in the folder on your computer that has fastboot.
Now download this:
http://mirror2.streakdroid.com/manii/Streak_360_17397_00.pkg
Rename this to Update.pkg and place in the root of your SD Card. (ensure there is no other Update.pkg on your card)
Power off the phone, if not done already.
Hold the power and camera button down until you get a white screen. Click on fastboot on your phone. Wait 10 seconds.
Plug it into your computer with the usb cable.
Wait for it to say fastboot ready (or something similar).
Now flash the recovery.img using the following command (This command assumes a Windows PC):
fastboot.exe -i 0x413 flash recovery recovery.img
When both your computer and the phone says it was successful, complete, or whatever, pull the battery.
Replace the battery, hold both volume buttons along with the power button.
In the menu that opens, choose the second option. Let us know your results.
I only added this post in case their was confusion over which files were actually needed. No need for a separate baseband, dsp1, or anything else. These are all included in the pkg file.
Click to expand...
Click to collapse
Thanks, this got my problem solved (endless boot logo issue with Simple Droid rom), however I am left with a no cell tower reception ?
I flashed the official stock unlocked retail rom ? still no tower reception ?
Try Simple Streak 1.2 , as i had this problem yestrday , but for simple streak 1.2 everything Worked Fine , just goto its thread and follow its instructions and u wll hve 2.2.2 in 15minutes , hit thnx if this helps

DHD got bricked

I had Revolution HD rom or something like that don't remember it't long time it worked. One morning I woke up and my phone didn't respone. Yesterday everything worked..When i tried to boot current rom it stuck on HTC screen..Okay so I decided to flash new rom because recovery still work but I probably lost my root because it can't delete previous rom..Today after long time I decide to ask you what to do. When I tried update new version of rom today it looked like everything it's fine but is stuck on HTC logo or restarts over and over again..
Sorry for bad eng..
DO you want help?I can help u if u only want it
Go into the recovery, wipe/format everything and flash a new ROM. Wipe is needed!
Sleekykenny: Of course i want
I wiped everything but it writes error when I wipe system.
I also flashed new rom and and got message saying successful, but when i reboot my dhd it just stay vendors screen which is 3mobile. But if i remove the battery i can get hboot menu. i also can get into clockworld recoveryand flash rom and wipe data etc. can anyone help or is my phone bricked.
Same problem
Guys I'm not an expert in this, but when you flash a new ROM it takes time to load. Maybe you just didn't wait enough.
markslo112 said:
Guys I'm not an expert in this, but when you flash a new ROM it takes time to load. Maybe you just didn't wait enough.
Click to expand...
Click to collapse
You're right. When intalling a new ROM, the first boot is longer because the new one is building a new Dalvik cache and so on... depending of the release.
Be patient a bit more, then report ...
http://www.multiupload.com/AURLLESU5V
1. Download this file
2. Do not unzip this file
3. Store it on SDCARD
4. Power off your device
5. Keep press Vol-Down
6. Do not releas the vol down an press power on
7. Follow the instruction on the screen
8. Enjoy and be patient for 5 minutes
;-)
Sent from my HTC Desire HD A9191 using XDA App
After 1 hour waiting I decided to put battery out because it have no point
rostuli said:
.....When I tried update new version of rom today it looked like everything it's fine but is stuck on HTC logo or restarts over and over again..
Sorry for bad eng..
Click to expand...
Click to collapse
markslo112 said:
Go into the recovery, wipe/format everything and flash a new ROM. Wipe is needed!
Click to expand...
Click to collapse
jabs40 said:
I also flashed new rom and and got message saying successful, but when i reboot my dhd it just stay vendors screen which is 3mobile. But if i remove the battery i can get hboot menu. i also can get into clockworld recoveryand flash rom and wipe data etc. can anyone help or is my phone bricked.
Click to expand...
Click to collapse
rostuli said:
Same problem
Click to expand...
Click to collapse
if you can get into your phone into hboot/recovery/fastboot then your phone is not a brick!
the problems with white htc screen is called a bootloop. like the user above suggested use a full wipe. easiest way is connect phone to PC and go into fastboot from your options when in the bootloader
type in fastboot erase system -w this will erase all system and userdata
then disconnect phone from PC when that is complete and navigate to your recovery option. select the recovery option and then mount back to USB cable and select USB toggle option so you can data transfer to SD card.
put new rom you wish to use or redownload one you wanted. then try again
It's actually a splash loop, a boot loop is the boot animation. But you get the idea
Sent from my HTC Desire HD using xda premium
the only option i get when i get into fastboot from the phone is bootloader,reboot,reboot bootloader and power down. if i chose any of the above then they all go back Hboot menu. cannot get into menu to type in fastboot erase sytem -w. can u advise me on where is the menu?. or i'm i doing something wrong..
thanks.
rostuli said:
After 1 hour waiting I decided to put battery out because it have no point
Click to expand...
Click to collapse
I don't understand where u was waiting.
Can you describe what was happening?
Are you able to access the bootloader??
1. Pull out battery
2. Put in battery
3. Hold power + Volume Down buttons until inside bootloader UI
4. Use volume keys to navigate to the "Recovery" option then press the power key.
5. Once recovery has booted, use volume keys to navigate to the "Factory reset & wipe data" option, then press power key.
6. Reboot.
Results?
Had the same problem in the past.
I downloaded an RUU and managed to get my phone to boot normally.
Take a look on this:
http://forum.xda-developers.com/showthread.php?t=982783
Download RUU is a good idea I tried it, didn't work..In that post he said some asian worked but I can't get one anywhere.
I used the Asia_WWE_1.32.707
Click to expand...
Click to collapse
like the user above suggested use a full wipe. easiest way is connect phone to PC and go into fastboot from your options when in the bootloader
type in fastboot erase system -w this will erase all system and userdata
Click to expand...
Click to collapse
Got part with fastboot but where am I supposed to write -w? I'm not that good in this that is why I ask here for help. But thanx anyway. And I tried wipe everything using recovery and when I wipe system writes error all the time.
I also tried all the above method but to no avail. Then a friend of mine bought the dhd so i made a goldcard from his phone loaded a pd98img.zip and flashed.. my dhd is back in action... i think this is your only solution, find somebody with the same phone. If u cant let me no i'll send you a gold card.
If it could help me than upload it somewhere And tell me how to use it. I heard about it but not sure.
You can remove your sd card then you will be able to choose the recovery option instead of it constantly going to hboot. The hboot looks for a file and asks you to instal or not install and then tells you to power of. Remove you sd card and you wont get this option so you can go into recovery and reflash a rom (you can re insert your sd card once in recovery and chose the mount option)

phone is stuck on "samsung" screen

hi all
i recently got my phone rooted (http://forum.xda-developers.com/showthread.php?t=1238070) using this method for the gingerbread stock i dont remember which step but its for rooting gingerbread...after successfully rooting phone i wanted to make a backup of my nandroid...that seem like a process...the recovery mode didnt have backup/restore option...so i was in the rom manager app and changed the flash recovery model (its the very last one on the rom manager) after doing that, it went into reboot but never leaves the "samsung" screen....so i took the battery out and was able to get into the recovery holding down both up/down and power button...and did a backup of current rom (stock)...and then select to reboot which still stays onto the "samsung" screen...so i am stuck and i dont know what to do anymore...or is a simple flashing a stock rom would fix it?
vk4559 said:
hi all
i recently got my phone rooted (http://forum.xda-developers.com/showthread.php?t=1238070) using this method for the gingerbread stock i dont remember which step but its for rooting gingerbread...after successfully rooting phone i wanted to make a backup of my nandroid...that seem like a process...the recovery mode didnt have backup/restore option...so i was in the rom manager app and changed the flash recovery model (its the very last one on the rom manager) after doing that, it went into reboot but never leaves the "samsung" screen....so i took the battery out and was able to get into the recovery holding down both up/down and power button...and did a backup of current rom (stock)...and then select to reboot which still stays onto the "samsung" screen...so i am stuck and i dont know what to do anymore...or is a simple flashing a stock rom would fix it?
Click to expand...
Click to collapse
odin back to stock, reroot, ditch rom manager, and make sure your getting into cwm 2.5 red recovery for performing a nandroid backup.
thanks for the reply, i was able to do exactly and my phone is in good function working order

Categories

Resources