HTC Sapphire 32A cannot load Recovery or Fastboot (bricked?) - myTouch 3G, Magic General

Hey all.
i tried to flash the 2.22.23.02 radio.
after doing so, the phone loads the Rogers screen, stays there for some time, and then reboots, loading the rogers screen again. this continues indefinitely.
i can no longer access the recovery screen (power+home) or the fastboot screen (power+back).
i have searched for a possible solution, to no avail.
is the phone bricked ? is there any way out of this ?
any help would be greatly appreciated.
- Yaniv.

Have you tried removing battery and hold home button when inserting it again?

yes, i have removed the battery and tried booting into either fastboot or recovery. No luck. as before, it only shows the rogers screen.
i suspect the radio installation was compromised. the battery may have been removed part way through the installation, or the radio file itself may have been corrupt. is there any way to recover from that ?
- Yaniv.

same here, i bricked my phone today when trying to flash 2.22.23.02 The boot-logo has stuck and I can't do anything.
Anyone got a solution? I tried almost everything I found on the internet. I just can't access recovery/fastboot mode.
Everytime i try to connect my phone with USB it says < waiting for device > although it's properly connected.

b4b4j4g4 said:
same here, i bricked my phone today when trying to flash 2.22.23.02 The boot-logo has stuck and I can't do anything.
Anyone got a solution? I tried almost everything I found on the internet. I just can't access recovery/fastboot mode.
Everytime i try to connect my phone with USB it says < waiting for device > although it's properly connected.
Click to expand...
Click to collapse
apparently keep inserting your usb cable and it should pick up. linux ubuntu with adb tools quicker apparently too.
what steps did yo take to get it to wait for devices.
if you stilll have power light light then you should be able to push recovery at some point, but keep trying for 15 mins or so

Related

Help needed to fix rooting gone wrong

First off im sorry im adding another rooting post to these boards.
So i decided to root my 32B magic today copyed the recovery.img over and update file from the rooting wiki, loaded recovery mode then updated, but now my phone when turned on loads to the vodafone screen and freezes id left it for afew hrs but still no luck.
Here is what i know so far:
I am able to get to fastboot and fastboot usb
I cant however get to recovery mode by pressing menu+power
I can get to the recovery mode using the sdk\tools
my problem is that im sure the fix is relativly simple i.e. load some files onto sd and start again, but the problem is that i have no other way to load the files onto the sd card than through the phone and my knowledge of adb isnt that great although has improved greatly today lol.
Im not sure how correct i am on this, but would it be a possible fix to load say a rom update.zip onto the sd card and load that through recovery mode to bring it up? If that would fix it could i possible get help on the adb code needed to pass the file from computer to the phone through fastboot usb or recovery.
Thank you very much for your help
Ok i think i have figured how to push files to my sd card however whenever i try it come up saying Failed ( remote:signature verify fail)
ok well i managed to move Cyanogen's newest rom over and update to that but its still hanging up at the vodafone screen upon booting, im lost for ideas.
Please any help how ever small would be amazing right now.
please help is desperatly needed.
i am having the same issue.... and it seems NO ONE has a bloody answer to why it is failing
I successfully update to 32A and root. Then i tried to update to MT3G OTA rom and now i'm stuck at Vodafone screen. Need help or ideas and how to recover..
i had the same problem, what i did was that i found a sd card adapter and hooked it up to my computer, its pretty quick and less hassle
waacow said:
I successfully update to 32A and root. Then i tried to update to MT3G OTA rom and now i'm stuck at Vodafone screen. Need help or ideas and how to recover..
Click to expand...
Click to collapse
take out your battery and after a few seconds put it back in, before it powers up go into fastboot(back+power) and that should do it
I still have a pretty red splash screen and stucked.
neoxtian said:
take out your battery and after a few seconds put it back in, before it powers up go into fastboot(back+power) and that should do it
Click to expand...
Click to collapse
I have same problem, but your solution didn't work for me.
I did as follows.
#1. typed following command in terminal.(well, I'm using Mac)
Code:
fastboot-mac flash recovery recovery-RAv1.2.0G.img
#2. pulled battery off from phone.
#3. pluged USB cable to phone and also Mac.
#4. pressed (ENTER) in the terminal, then fastboot-mac said '< waiting for device >'.
#5. put the battery in while pressing (back)+(power)
#6. then, pretty red vodafone splash screen come up.
#7. In the terminal, it still said '< waiting for device >'. Nothing was changed.
#8. On the phone, pretty red splash screen was still there. Nothing was changed.
Those are all I have done many times for last 2 days.
But, it didn't work.
Please let me know if there is something I missed.
I tried and stuck in the exactly same problem as [robotician]. I have MT3G.
robotician said:
#5. put the battery in while pressing (back)+(power)
#6. then, pretty red vodafone splash screen come up.
#7. In the terminal, it still said '< waiting for device >'. Nothing was changed.
Click to expand...
Click to collapse
THe red vodafone should not come up. You have to hold the back key longer perhaps, because it's supposed to go into the fastboot screen with all sorts of text and three androids on skateboards at the bottom.
@Niaski
was your rom made for the 32B or the 32A?
They are very diferent phones and mixing the roms causes the issue you are seeing.

stuck at splash screen, have tried all the solutions.

Hello, I am having some issues and I've tried all of the fixes on several different forums including this one.
I wanted to root my phone so I followed Amon's guide and successfully went from the Tmobile released 1.6 to the rooted 1.5 in the guide. I then wanted to update to the rooted 1.6 but was having issues with trying to install the update. While in the safe mood I asked it to extract update.zip about 3 times before it finally opened it and it extracted everything really quickly!
I then tried to reboot the phone but it stayed at the green MyTouch 3G splash screen without going anywhere. I've tried all the tricks of taking out my battery, unplugging the USB, any form of combination I could.
I'm told my phone isn't bricked, only stuck but my computer isn't picking up the phone either. It doesn't say it can't read the USB device and fastboot still says waiting for devices.
Can some one please help me with my problem?
Thank you,
Difinitus said:
Hello, I am having some issues and I've tried all of the fixes on several different forums including this one.
I wanted to root my phone so I followed Amon's guide and successfully went from the Tmobile released 1.6 to the rooted 1.5 in the guide. I then wanted to update to the rooted 1.6 but was having issues with trying to install the update. While in the safe mood I asked it to extract update.zip about 3 times before it finally opened it and it extracted everything really quickly!
I then tried to reboot the phone but it stayed at the green MyTouch 3G splash screen without going anywhere. I've tried all the tricks of taking out my battery, unplugging the USB, any form of combination I could.
I'm told my phone isn't bricked, only stuck but my computer isn't picking up the phone either. It doesn't say it can't read the USB device and fastboot still says waiting for devices.
Can some one please help me with my problem?
Thank you,
Click to expand...
Click to collapse
What do you mean by safe mode? Which donut ROM are you trying to flash? Which recovery image do you have? How long was it stuck on the splash screen. You need to give more details for us to be able to help out. What radio and spl do you have?
I meant safe mode by where you select the option to extract update.zip.
I was trying to flash Amon's 1.6 32A Rom. Even though my phone states 32B I followed his instructions on how to Root the Mytouch and he was using 32A stuff so I figured if it worked OK, I was now running on 32A instead of 32B.
I was using RAv1.2.0H.img from his original guide. I dont know what radio and spl I have. There wasn't really a guide on updating ROMs so I just tried the same basic steps.
I hope this is more helpful, I am doing my best to learn everything, I am still fairly new to modding a phone. (my last phone was a Blackberry 8100).
Difinitus said:
I meant safe mode by where you select the option to extract update.zip.
I was trying to flash Amon's 1.6 32A Rom. Even though my phone states 32B I followed his instructions on how to Root the Mytouch and he was using 32A stuff so I figured if it worked OK, I was now running on 32A instead of 32B.
I was using RAv1.2.0H.img from his original guide. I dont know what radio and spl I have. There wasn't really a guide on updating ROMs so I just tried the same basic steps.
I hope this is more helpful, I am doing my best to learn everything, I am still fairly new to modding a phone. (my last phone was a Blackberry 8100).
Click to expand...
Click to collapse
I'm not sure what you mean by extract update.zip. I think you are talking about fastboot there. Have you tried to flash the rom in the recovery image? you know, by pressing power and home to get to the recovery, then flashing it through there. go into fastboot by pressing power and back and it will tell you what radio and spl you have. once you have that, write that so we can further get a grasp as to your problem. if in fact you still have the 32A configuration, you might want to flash over the 32B radio and and try to flash a 32B rom.
That is my problem, I can't get past the "MyTouch 3G" green screen. I've tried the Home button, Back button, Vol Down button and holding them for several minutes with no result, it stays at the very first screen when it turns on.
I've tried flashbooting from adb but it says "waiting for devices" and my computer isn't picking up any kind of device.
I'm having the exact same problem except im stuck on the vodafone screen. I also tried flashboot form adb but "waiting for devices" is shown and pc wont detect the device.
Did this before.
If you can get into recovery mode, Hold Home button while powering on, you can restore a nandroid backup, if you took one, or put the sappimg.nbh file or the correct items to flash whatever rom.
I had a stock 1.5 Mytouch. I wanted to root and get the 1.6 version of cyanogen, forgot to flash the HTC_ADP_1.6_DRC83_rooted_base as part of the process and had got stuck in the neverending mytouch logo.
If you can get into recovery:
wipe, then put the update.zip files directly on the card.(use a SD adapter, ...)
Choose apply any update from SD
Choose the base files, then the rom if its a newer version
Once those two updates run, reboot the phone.
My never ending logo disappeared, and the phone booted. Newb mistake on my part.
Wait at least a minute or two once this is done.
since the phone is stuck on the original logo and isnt responding to buttons when loading up... do we manually remove and reinsert the battery while holding the home button?
I have tried getting into recovery mode, but it doesn't do anything past the splash screen. Holding the home button while trying to power on the device won't do much.
hey difinitus keep me updated if u somehow get it to work
Even when you take the battery out for a significant time it turns on immediately to the logo screen. Whats the longest you have left the phone sitting at the logo screen.
A small thought, since it was trying to load a rom you had on your memory card, try taking the battery out, and removing the memory card, and then turn it on and wait a bit and see if you get a different result. Its a thought.
If that doesnt work put the memory card back in and turn it on and once its on remove the memory card.
Perhaps the rom on your memory card is corrupt and it is unable to continue to load it, you could even try putting the rom on again using your memory card reader and your computer, thus erasing the existing one.
try plug usb in to phone
take battery out
prees and hold home button
re-insert battery while still holding button
let go after about 3-5 sec
have you tried getting into fastboot by holding back and powering on the phone once you took out the battery? cuz fastboot doesn't initialize after the splash screen, it just pops up as soon as you hit back and power
@Tech no boy; I have tried using several different update.zip and a .nbh and also tried reformatting.
@sitimber; have tried that before, the splash screen still pops up. It just vibrates once and goes to the logo, with any combination of buttons and steps.
@tazz9690; Yes, no matter what I do it still goes to the splash screen. I've been saying that for several posts now.
you might have a bricked phone then. call up t-mobile and get it returned under warranty. if you are 100% positive that you will not be able to get past your splash screen, then the return center will not be able to prove that you have modded your phone, and they will send you another phone.
you might have a bricked phone then. call up t-mobile and get it returned under warranty. if you are 100% positive that you will not be able to get past your splash screen, then the return center will not be able to prove that you have modded your phone, and they will send you another phone.

bad radio flash = brick?

Hi!
i recently bought a Vodafone branded Magic for spare parts
previous owner said it went bizerk after radio update
after turning it on, it vibrates and displays the first boot screen (HTC MAGIC with a black background) and stays like that forever
fastboot doesn't work, hboot: no, recovery: no, even the pc does not recognize it (charges at least)
is there anything i could do to revive it?
or should i rip it open and sell the parts
p.s. i've searched the solution for quite a while now, but all similar threads usually end with the phone being replaced (which is a no-no for me, as it's originally bought from Germany )
sorry, it's definitely bricked.
Hi,
I've read bit on the forum. Maybe from the radiobootloader, you can try some reasearch? THere is no clear indication on how to do it but as you're stuck anyway, it's worth trying it.
To enter radiobootloader: push trackball and poweron/end key. YOu should see the blue led.
http://forum.xda-developers.com/showthread.php?t=533240
Then with a console cable (HTC serial debug cable), you might have access to some console command.... if any.
Here are more explanation for the hero but they might be also in the magic.
http://www.globalgsm.mk/showthread.php?tid=577
I performed a SPL flash, the phone rebooted ,it took long time rebooting so i got panicked i pulled out the battery ( wasn't a smart move ).
tried to start the phone.. now i was stuck at the first splash screen.
-pulled out the battery and back again start the phone... stuck at the first splash screen or boot looping endlessly,
-did all possible key combinations to get in fastboot, recovery mode... nothing.
-cried for help, got directed to a post similar to mo my case... worked for me hope it dose for everyone else.
here is what i did (followed):
-On the PC, i ran the command 'fastboot boot recoveryimage.img'.
-At this point the command says 'waiting for device' (or something like that).
-I removed the battery.
-I Connected USB.
-I inserted the battery.
-I booted the phone while holding the HOME key.
-The phone still froze at the first splash screen, but then suddenly, the waiting fastboot command detected the phone and booted the recovery image!
flashed again but this time checked step twice before i check it a third time, and flashed the SPL and radio and the rom.
thanks for the replies
sheesh, it's so easy to brick this phone!
Flash Intel BIOS to AMD based motherboard on your PC and the only thing you can do is to exchange BIOS electronic (unless you have dual BIOS mobo).
So, you flashed wrong RADIO to your phone? Open it up and exchange soldered FLASH unit with proper one - good luck.
Or maybe you have HTC hardware flashing tool for flashing FLASH unit without removing it from the mobo of the phone then you can save your unit.

My tmobile mytouch 3g is bricked how can unbrick it??

Hey people greeting first of all by stupidity i flashed a new radio 32a radio on my 32b mytouch by accident now my phone its bricked it just stay stuck on the first splash scree i cant fastboot or recovery mode my pc dosnt reconize my phone ether what can i do??? Help please
mytouch 3g
32b s on g
slp 1.33.2010
if you cant fastboot/recovery/anything, it's pretty much bricked. If you get some blue LED, there isnt much hope for that either.
i got no blue led it just stay on the first splash screen no recovery mode or fastboot
morepr said:
i got no blue led it just stay on the first splash screen no recovery mode or fastboot
Click to expand...
Click to collapse
Then you're bricked. Means you need a new phone.
no ooo
people there is a solution via the usb when it is stuck at the first splash screen just search
mine is totally bricked and still no solution !!!
call tmobile.
I did the same thing yesterday and I told them that My phone updated itself then wouldnt turn back on.
my new one is in the mail and will be here in 2 days
just act naive and clueless.
as long as your still under warranty, your all good.
thanks ppl i try everything but this its not going no where the pc dosnt want to recognize my phone and i try everything just gonna throug it in the toilet and call the insurence
At least sell it for parts, you can probably squeeze 40 bucks out of it or similar. Check the going rates on eBay for non-functional handsets.
I know its a bit late....but I fixed my 'bricked' MT3G
I was searching around the web for a solution to my problem, and needless to say, there wasn't much out there for me besides the typical... "it's bricked, buy a new phone."
So here's my story:
Earlier today I decided to upgrade my MT3G to Cyanogen's 5.0.7 Android 2.1 rom. I had used the experimental 5.0.6 rom, and found it to be a bit more "glitchy" than I was comfortable with. So, I went online for what I figured to be a very simple upgrade...and downloaded both the rom and a kernel (which was 32A not 32B).
Needless to say, after installing the rom, the kernel, my gapps update, and resetting my phone... it did nothing but hang on the MT3G screen. After about 30-45 min...I knew something was wrong and I freaked. It was unresponsive to multiple attempts to reboot, and was not being seen by my computer.
That's when the online search began... I looked for other individuals who've suffered the same fate and kept coming up with the same "you're screwed" response. Having recovered more "bricked" iPhones in the past than I can count, I knew this could not be the case. For me, as long as the phone turned on and flashed some sort of screen, there's still hope.
So what did I do...
Well, I first attempted to boot the phone into recovery mode...but it would not work. Next, i figured I would try doing a fastboot... and what do ya know... it worked!
From there I used multiple combinations of plugging in the phone via usb and resetting and putting into recovery mode until I found one that worked.
So here's my steps:
(Note: this has only been tested if you accidentally installed the 32A kernel on your 32B device)
1. Power on the phone... If you continuously sit at the green MT3G screen, take off the back and take out the battery.
2. Plug in your USB cable (VERY IMPORTANT, will explain later)
3. Next, replace the battery and hold down both the [home] and [power] buttons, if it merely turns on to the green screen, and you get no response from your computer's usb notification window...take out the battery again
4. Fastboot your phone (hold down [back] and [power] arrows) While your phone in connected to your computer, it should make a notification sound.
5. Restart your phone from Fastboot, AS SOON as it shuts off, hold down the [home] and [power] keys.
6. Continue holding until you hear a notification sound from your computer...at that point it should boot into recovery mode.
7. Wipe your handset (just for good measure) and reinstall your update package...DELETE that wrong kernel from your sd card so you dont make the same mistake again.
Summary:
I have no clue as to why it works, but I've done this 3 times now just to verify, and each time it has worked. For some reason, the USB connection to the handset acts as a precursor to the phone booting. I will stress that without plugging in the USB, my phone did not boot into recovery mode. However, after I did plug it in...Fastbooted....Reset....and Booted into Recovery it worked perfectly.
I am still suffering lags on my device (more so than before) and this could be a product of my stupidity, or this rom being laggy. Either way it works, and I don't have to purchase a new phone!!!
Mod. edit: not dev related, moved to general
I experienced the same problem which can not boot recovery.
I've tried your way above but no luck.
Is there another way?
HTC MAGIC MY TOUCH
SAPPHIRE PVT 32B ENG S-OFF H
radio-2_22_23_02
cm-5.0.7-DS-signed
T-Mobile myTouch 3G - stuck on splash
Today I probably flashed my phone with a wrong (32A) SPL. I can't access fastboot, recovery mode or anything, including access from PC (either Linux or Window$). But it's stuck on splash - if it was totally bricked, would it still load a splash screen? Is there any hope?
Sigh.. I have the same problem.. Blue LED If I hold down the track ball but can't get to fastboot or recovery..
My problem started after I flash the HTC rom from the website.. Sigh.. I think it was the radio that did it..
Anyone found a way to get around this (w/o jtag)?
I am also experiencing the same problems. Blue LED works, cannot get into fastboot, bootloader, or recovery. It just sits on the opening splash screen.
Any other ideas?
Looks like I will just sell mine as a "bricked" device and hope to salvage a few bucks. Sigh
THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU. I would keep going but you get the point. I downloaded ROM Manager, and I flashed a Cyanogen Nightly ROM from 11-5-2010 and I got nothing but a Green spalsh screen and a reboot cycle. You instructions ROCK!!!
I went crazy and prayed a few times to unbrick my phone. I tried different things and then nothing worked. So I had the phone on for a bit and it restarted twice and then ran. Just let in sit for a while. Give it time. Maybe itll work for u too. goodluck
have a mytouch 3g 1.2 with the old radio and SPL, i acidently bricked it trying to flash the new radio and SPL and now i cant get into recovery or fastboot and the flash screen is frozen, pleassssssee help me get this fixed it has been completel useless for the last week or so
Succesfully unbrick with wiggler Mytouch 3G 1.2
as Ezterry instruction i follow his guide, and build my own JTAG.
My God its working 100%..
awebagar said:
as Ezterry instruction i follow his guide, and build my own JTAG.
My God its working 100%..
Click to expand...
Click to collapse
Can I ship you my bricked device so you can practice unbricking? I can pay you in random electronics

HTC one M9+ unable to flash or unlock

Hello everyone,
Long time reader for time poster. I have this device that is stumping me, and I was hoping with your help I can get to the bottom of its issue.
i am not going to describe everything that I had done as that would take pages and pages, but there is one aspect that I feel might be the crux of the problem so I will start with that and see if it leads us anywhere.
Basically this device was working, sat in a drawer for a while, the battery dried up, and since it wasn't able to boot into android, it always gets stuck at the htc logo screen.
I have tried flashing it using the sd card method, with the newest corresponding zip that I could find, it started doing its thing, then at some point restarted, got stuck again, and I ended up with an unknown radio and dsp (looking at the infos in download/recovery modes)
I don't know the history of the device, but i don't believe usb debugging or oem unlocking were turned on. and obviously I can't check or modify them as I can't get into the device. and it is currently locked and S ON.
Currently, I can boot into recovery/download no problem:
- I can easily detect and interact with the phone through fastboot, but not through adb.
- clearing cache and factory resetting go through fine, no errors, but again after restarting the device it gets stuck at the htc logo.
- if I try to flash through the SD card, it starts normally, then restarts and gets stuck at the htc logo.
- if I try to flash anything through fastboot, I get an error telling me the device is still locked, which it is.
- if I try unlocking using fastboot (following the official htc method), once again it starts normally, but then restarts and gets stuck at the htc logo again.
Correct me if I am wrong, but it feels to me like this is a software issue, that for the hell of me I can't seem to be able to get around.
I tried to keep the post simple, so if any additional information is needed, or tests you'd want me to run please don't hesitate to ask.
Thank you for your help, much appreciated!
Hello again, just a little bump. As I am stuck and any ideas would help.

Categories

Resources