I purchased an HTC Desire to use with my AT&T service. My Desire is GSM/WCDMA and not GSM/UMTS. Meaning, that my Desire can not run on anything but EDGE. I spoke with a rep at HTC and he let me know that there may be an APP to unlock the 3G service... Does anyone have any information on this?
Thank you kindly in advance...
~HR
isn't WCDMA = UMTS?
That's what I thought too, but the HTC rep, let me know that I can only unlock 3G with an App. That because I have an import and it's not currently available in the U.S. I would need to find this app and unlock my 3G service. The Desire wont pick up AT&T's 3G...
boge said:
isn't WCDMA = UMTS?
Click to expand...
Click to collapse
Yes........
I think it might be a frequency issue.
As far as I'm aware there are two models of Desire - A8181 and A8183.
In Australia, the model is the A8183 which provides WCDMA/UMTS at 850 and 2100 mhz. I think the A8181 operates at 900 and 2100 mhz.
If you imported from anywhere else other than Australia you'll most likely have a model A8181.
What frequency is AT&T 3g?
I do have an A8181. AT&T currently uses 850 and 1900 mhz...
Do you think there is a fix for this like the HTC rep mentioned?
cr1960 said:
I think it might be a frequency issue.
As far as I'm aware there are two models of Desire - A8181 and A8183.
In Australia, the model is the A8183 which provides WCDMA/UMTS at 850 and 2100 mhz. I think the A8181 operates at 900 and 2100 mhz.
If you imported from anywhere else other than Australia you'll most likely have a model A8181.
What frequency is AT&T 3g?
Click to expand...
Click to collapse
AT&T uses 850/2100 like Telstra does in AU.
If you have the A8181 you are stuck with 900/2100. I think it's a hardware thing so an app probably wont help, not 100% sure about that though.
[email protected] said:
That's what I thought too, but the HTC rep, let me know that I can only unlock 3G with an App. That because I have an import and it's not currently available in the U.S. I would need to find this app and unlock my 3G service. The Desire wont pick up AT&T's 3G...
Click to expand...
Click to collapse
You bought the wrong phone ?(A8181)! As has been previously mentioned, you need an Australian Telstra Desire (A8183) to support AT&Ts 3G.
There is nothing that can be done about this because the hardware is different. You should sell your A8181 and buy an A8183.
Regards,
Dave
[email protected] said:
I do have an A8181. AT&T currently uses 850 and 1900 mhz...
Do you think there is a fix for this like the HTC rep mentioned?
Click to expand...
Click to collapse
Sorry to say , but I don't think so. the differences are in the hardware, not software.
You could always keep your device and change carrier? I presume someone in your area might use 2100 mhz??
cr1960 said:
You could always keep your device and change carrier? I presume someone in your area might use 2100 mhz??
Click to expand...
Click to collapse
Unfortunately not - the only other major GSM operator in the US is T-Mobile, and they use a split band of 1700/2100 and requires support for both to work.
Regards,
Dave
Does anyone wanna trade an A8183 for my A8181????
-------------------------------------
Sent via the XDA Tapatalk App
foxmeister said:
Unfortunately not - the only other major GSM operator in the US is T-Mobile, and they use a split band of 1700/2100 and requires support for both to work.
Regards,
Dave
Click to expand...
Click to collapse
Bugger! And I thought Australia had crappy providers
@Hugo - good luck with your sale. The device is incredibly popular in Europe, so eBay might be your best friend for a buyer.
i will
i' happy to trade with yours i got htc 8183 for 10 days
im running different operator than telstra so i would like a free wwe rom
Related
Saw this news story, does anyone know if it is credible? The NextG Service is on the 850MHz band which is the same as Rogers/Fido in Canada and Cingular in the US...if all this is true then one of these unlocked would be 3G Compatible in North America...Thoughts?
http://apcmag.com/iphonelike_htc_touch_hd_set_for_aussie_launch.htm
http://www.expansys.com.au/d.aspx?i=173812
Well that would suck for me because about 3 hours ago I got an iPhone because I really needed 3g already I do ally of browsing and videos but I like the touch he better....
What is the exact issue with North America and the Touch HD? I thought HSDPA was fully supported in our continent under most major providers. Just curious as I'm looking at purchasing one in the future.
Lokosis said:
What is the exact issue with North America and the Touch HD? I thought HSDPA was fully supported in our continent under most major providers. Just curious as I'm looking at purchasing one in the future.
Click to expand...
Click to collapse
The Touch HD that is out now operates on UMTS 900/2100. Telstra in Australia and the North American providers (except T-Mobile) use UMTS 850.
hopefully it is just some software that HTC did. cuz we do have that option to change it to 850MHz 3G in the phone but just nothing happens to it. If a flash can fix it then it should be ok. EDGE for me is pretty fast anyways in Toronto most of the time.
b-e-a-s-t said:
Saw this news story, does anyone know if it is credible? The NextG Service is on the 850MHz band which is the same as Rogers/Fido in Canada and Cingular in the US...if all this is true then one of these unlocked would be 3G Compatible in North America...Thoughts?
Click to expand...
Click to collapse
850 mHz is just one of the 2 bands needed to work on US 3G. you also need 1900 . my understanding is one band is for upload the other for download. don't get me wrong, it would be fantastic if the Aussie version was fully capable on US networks. i'll believe it when i see it. heck, expansys even has a note saying they have to confirm the 850mHz 3G band.
850/1900Mhz....
could someone please explain the upload/download at different frequencies paradigm to me?
cortez.i said:
850 mHz is just one of the 2 bands needed to work on US 3G. you also need 1900 . my understanding is one band is for upload the other for download. don't get me wrong, it would be fantastic if the Aussie version was fully capable on US networks. i'll believe it when i see it. heck, expansys even has a note saying they have to confirm the 850mHz 3G band.
Click to expand...
Click to collapse
This is incorrect. With at&t you do not need both. With just 850mHz you will be more than fine.
Now with T-Mobile you would need both 1700 and 2100 not just 2100 or just 1700 both. Just more reason to hate T-Mobile.
I am ready to take the plunge and drop the $ for an HD. I also will switch my number back to at&t from verizon. I guessi cna say almost ready. I really dont want to spend $800 for no 3G
Does anyone know how hspa in Canada with Rogers/Fido works? i.e. are dual frequencies required or is 850MHz enough to get top speeds? Thanks...
Has anyone brought one into the US and had any success getting a 3G signal ?
Some carriers in the US and Canada use 850mhz such as AT&T and Rogers but they also use 1900mhz. It really depends where you live... Whiich city, state etc
1900mhz is growing in popularity in the states.
tbfl said:
Has anyone brought one into the US and had any success getting a 3G signal ?
Click to expand...
Click to collapse
Doesnt work
b-e-a-s-t said:
could someone please explain the upload/download at different frequencies paradigm to me?
Click to expand...
Click to collapse
I can't remember which but one is used for uploading and one is used for downloading.
cortez.i said:
850 mHz is just one of the 2 bands needed to work on US 3G. you also need 1900 . my understanding is one band is for upload the other for download. don't get me wrong, it would be fantastic if the Aussie version was fully capable on US networks. i'll believe it when i see it. heck, expansys even has a note saying they have to confirm the 850mHz 3G band.
Click to expand...
Click to collapse
You are exactly right. YOu need both 1900 and 850mhz
tbfl said:
Has anyone brought one into the US and had any success getting a 3G signal ?
Click to expand...
Click to collapse
Sadly, no 3G for me.
You do not need both 1900 and 850. Its only tmobile that u need both frequenes but they use 1700 and 2100. As long as u have ether 850 or 1900 (depending on what freuency ur area uses) u will have 3g with at&t.
cortez.i said:
850 mHz is just one of the 2 bands needed to work on US 3G. you also need 1900 . my understanding is one band is for upload the other for download. don't get me wrong, it would be fantastic if the Aussie version was fully capable on US networks. i'll believe it when i see it. heck, expansys even has a note saying they have to confirm the 850mHz 3G band.
Click to expand...
Click to collapse
No, the *network* you use may be present on more than one frequency, but its not 850 being uplink and 1700 being the downlink.
When we talk about UMTS the downlink is around 850/1700/2100 but the uplink is always a few MHz below that. (to be pedantic, the UMTS specification specifies the exact downlink/uplink separation)
I can't imagine HTC producing a UMTS 850 phone that won't work on ATT/Rogers and Telstra . Telstra only needs the 850 band so HTC can add in whatever extra the US providers use. It will probably be the same bands supported by the HTC Hermes and other phones common to these providers.
for AT&T, you do NOT need both frequencies (850 and 1900) for 3G. They don't HAVE both frequencies in most areas. It's one or the other.
And yes, T-Mobile US sucks ass...
-Mc
Tremere said:
No, the *network* you use may be present on more than one frequency, but its not 850 being uplink and 1700 being the downlink.
When we talk about UMTS the downlink is around 850/1700/2100 but the uplink is always a few MHz below that. (to be pedantic, the UMTS specification specifies the exact downlink/uplink separation)
I can't imagine HTC producing a UMTS 850 phone that won't work on ATT/Rogers and Telstra . Telstra only needs the 850 band so HTC can add in whatever extra the US providers use. It will probably be the same bands supported by the HTC Hermes and other phones common to these providers.
Click to expand...
Click to collapse
McHale said:
for AT&T, you do NOT need both frequencies (850 and 1900) for 3G. They don't HAVE both frequencies in most areas. It's one or the other.
And yes, T-Mobile US sucks ass...
-Mc
Click to expand...
Click to collapse
Well I stand corrected then. This is good news then. Just need somebody in the US to buy a Telstra HD and see if it works. I guess it will be dependent on the area though. If you don't have 850mhz.
Lol i guess it took a senor member to say it for anyone to believe it. I only said it in the first page lol. Lets see what happens when the aus model comes out.
So it is decided then IF the Blackstone is introduced by Telstra and working on their 850MHz 3.5G Network THEN it has the opportunity to work in both the US on Att and Canada's Rogers/Fido...I will wait for this device, purchase it and let the board know if someone else doesn't beat me to it!
P.S. does someone think that this release may be with the Android OS for Telstra? It was the Telstra reps that were commenting at CES 2009 regarding Palm Pre and how the next Android phone that they were testing kicks it...who knows probably coincidence...
Given the poor 3G coverage on T-Mobile in the US, why would two powerful phones such as the Nexus One and HD2 be relegated there? It is as if they are sabotoging themselves by being on T-Mob. (This paragraph was rhetorical).
My X1i is on it's last leg (screen blank in landscape and microphone not working) and I want to replace it. Currently, HD2 is the only thing that is appealing. I think I am going to hack one of the overseas models to work on 850MHz 3G on AT&T and forego waiting for the T-Mob model. Thanks XDA.
Hopefully, someone will make a step-by-step sticky on how to get the HD2 working on AT&T 3G USA.
1. Hard-SPL
2. Flash custom ROM
3. Insert SIM
That's what I did to get it working on Telus' 850mhz 3G. I remember the dude who made the huge thread about being the first in the US with a T9193 saying it was similarly easy.
If you just put your AT&T SIM in, you'll be able to send/receive texts, and make calls, but Telstra has the data connection settings locked down pretty heavily in the stock ROM...
OK, yeah, I was just looking through some of that thread. I thought it said something about changing or not changing radios. Is this already taken care of inside the custom ROMs ?
WhyBe said:
OK, yeah, I was just looking through some of that thread. I thought it said something about changing or not changing radios. Is this already taken care of inside the custom ROMs ?
Click to expand...
Click to collapse
As far as I know you don't need to change the radio.
I didn't have to.
Great, thanks.
What type of price did you get? I see them from less than $700 to more than $900.
WhyBe said:
Given the poor 3G coverage on T-Mobile in the US, why would two powerful phones such as the Nexus One and HD2 be relegated there? It is as if they are sabotoging themselves by being on T-Mob. (This paragraph was rhetorical).
My X1i is on it's last leg (screen blank in landscape and microphone not working) and I want to replace it. Currently, HD2 is the only thing that is appealing. I think I am going to hack one of the overseas models to work on 850MHz 3G on AT&T and forego waiting for the T-Mob model. Thanks XDA.
Hopefully, someone will make a step-by-step sticky on how to get the HD2 working on AT&T 3G USA.
Click to expand...
Click to collapse
if your device doesnot 850 mhz you will not be able to use 3g in usa it is hardware not software
hoss_n2 said:
if your device doesnot 850 mhz you will not be able to use 3g in usa it is hardware not software
Click to expand...
Click to collapse
Thanks, however, that wasn't the question. It was already answered above.
Thanks all
hoss_n2 said:
if your device doesnot 850 mhz you will not be able to use 3g in usa it is hardware not software
Click to expand...
Click to collapse
WhyBe said:
Thanks, however, that wasn't the question. It was already answered above.
Thanks all
Click to expand...
Click to collapse
You need to make sure that the HD2 you buy has HSPA/WCDMA 850 MHz (not just GSM 850 MHz), because most do not.
harolds said:
You need to make sure that the HD2 you buy has HSPA/WCDMA 850 MHz (not just GSM 850 MHz), because most do not.
Click to expand...
Click to collapse
Yes, based on what I am reading, getting the Telstra model with 850MHz 3G band should be compatible with 850MHz 3G AT&T in the U.S.
The designated-"U.S." model is designed for T-Mobile 3G (1700MHz or 2100MHz)
WhyBe said:
(1700MHz AND 2100MHz)
Click to expand...
Click to collapse
I fixed that for you -- phones won't work on T-Mobile 3G without BOTH 1700 and 2100.
Hi,
The official specs of T-mobile's HD2 says that the supported 3G bands are: WCDMA/HSPA: 1700 MHz (AWS) / 2100 MHz
Does it mean it will work on European 2100 MHz 3G too? Nexus one does so I suspect HD2 could too but as far as I could digg nobody had a straight answer to this question yet.
-AlefSin
actually i asked HTC CS before, and the answer is NO!
european countries WCDMA frequencies are the same with ASIAN countries. So no chance for European countries either.
hmmm I don't know JohnQ. In your attached email HTC is saying China's frequencies are different from the rest of the world so how do you say it's the same as Europe? I don't know much about 3G network in China though.
Just a few weeks back it was annoounced that the US operators had all signed up to migrating to the rest of the wold's GSM standards!
So in time we will all be singing from the same hymn sheet!
Accoridng to Wikipedia, while 3G in China is using the same frequencies as Europe in UMTS-I band, the air interface is different (TD-SCDMA vs TD-CDMA).
(sorry, cannot link to the docs since as junior member cannot embed links yet).
pa49 said:
Just a few weeks back it was annoounced that the US operators had all signed up to migrating to the rest of the wold's GSM standards!
So in time we will all be singing from the same hymn sheet!
Click to expand...
Click to collapse
Wow, that's... odd! It seems US operators cannot even agree whinin US and now they all want to use the rest of world's standards! That's so un-american!
At&T, rogers, etc are all using european 3G frequencies, which is why you can use device from europe on their networks.
T-mobile US uses 1700 & 2100 (one for up stream, one for downstream) which is why it won't work on at&t etc or european frequencies.
The t-mobile 3G phones use both 1700 and 2100 at the same time; and they cant use 2100 seperately on other networks.
erm att uses 850/1900,and very few operators use the same,none in Europe use these bands
alefsin said:
hmmm I don't know JohnQ. In your attached email HTC is saying China's frequencies are different from the rest of the world so how do you say it's the same as Europe? I don't know much about 3G network in China though.
Click to expand...
Click to collapse
you can check though. google it
Yes it does!
alefsin said:
Hi,
The official specs of T-mobile's HD2 says that the supported 3G bands are: WCDMA/HSPA: 1700 MHz (AWS) / 2100 MHz
Does it mean it will work on European 2100 MHz 3G too? Nexus one does so I suspect HD2 could too but as far as I could digg nobody had a straight answer to this question yet.
-AlefSin
Click to expand...
Click to collapse
I've tested mine on a 3G only network (2100mhz) and it works fine. What I mean by "only" is that the Digi Mobil in Romania works only on 2100Mhz.
I hope it helps!
GG
JohnQ said:
you can check though. google it
Click to expand...
Click to collapse
I did, check post #5
Well, it seems the answer is negative. I asked HTC:
Hi, I'm very excited about HTC HD2 on T-Mobile USA. However there is a cruicial question taht I could not find an answer for yet: Should I get this phone, when I travel to Europe, can I use 3G? The specs say this phone will support AWS/2100 MHz UMTS. Since the 2100 MHz is the dominant frequency for western european 3G networks, does it mean this phone would work on their 3G networks? Nobody at T-mobile's support could answer me so I hope you could solve this mystery.
Click to expand...
Click to collapse
And they answered:
Thank you for contacting HTC Technical Assistance Center. I understand the importance in researching a phone before you purchase it. This is a unusual situation and one T-mobile may not have been experienced with. For T-mobiles network the phone will be using the 1700 and 2100 bands. Although the 2100 band is common world wide. allowing the phone to pick up the edge network. T-mobile uses the 1700 for there 3G services. This band as far as we are aware is only used by T-mobile when it comes to major carriers world wide. More then likely the phone would not be able to pick up 3g if taken over seas.
However. T-mobile dose have a few branches in Europe. You may wish to check with them to see what bands they use for 3G, and if they have had any conflicts with American phones.
Click to expand...
Click to collapse
wmfreak said:
I've tested mine on a 3G only network (2100mhz) and it works fine. What I mean by "only" is that the Digi Mobil in Romania works only on 2100Mhz.
I hope it helps!
GG
Click to expand...
Click to collapse
But T-mobile's HD2 is not out yet! Are you sure you didn't test European HD2?
OK things are starting to get weird. I received a negative answer from HTC's customer support but then I found USA T-mobile G1 users that reported their phones were working on 2100 MHz 3G in Europe (G1 like US T-mobile version of HD2 only supports 1700/2100 MHz 3G). I need to buy a phone and these contradictory reports leave me confused
Here is what T-mobile says in the specs sheet of the new HD2:
Band (frequency): 850 MHz;900 MHz;1800 MHz;1900 MHz;UMTS: Band I (2100);UMTS: Band IV (AWS);UMTS: Band IV (1700/2100)
Click to expand...
Click to collapse
Isn't it interesting that 2100 Mhz is listed both separately and in with combintaion with 1700 Mhz?
JohnQ said:
actually i asked HTC CS before, and the answer is NO!
european countries WCDMA frequencies are the same with ASIAN countries. So no chance for European countries either.
Click to expand...
Click to collapse
nice email address you have in that picture John
I tested my unlocked TMOUS HD2 in Sweden using 3's network and worked like a charm in 3G
Bit of a bump here as I'm trying to use my unlocked US T-Mobile HD2 with Orange in France and I can't do better than Edge (it went down to GPRS at one point...). I guess it could come down to spotty reception but I do get 3G speeds in my current location with an iPhone 3GS so I'm not so sure...
I'm using the AmericanAndroid ROM, maybe that's why my speed is throttled ;-)
I am using HD2 T-mobile in Serbia and i have no problem with conection or data speed.
I was on vacation and i didnt use Wifi ,and i used the phone all the time on 3G - the 3G network is incredibly fast, I even think that it is twice as fast as the EU HD2, which I used before..
Thanks, will check again then, maybe bad reception then!
Hey everyone i was just wondering if it's possible for me to get 3g working on my legend. It is an international legend and I am on rogers canada network. Any help whatsoever would be greatly appreciated.
I don't think it will work. The international version uses a different band (900/2100) I believe.
GroovyBear said:
I don't think it will work. The international version uses a different band (900/2100) I believe.
Click to expand...
Click to collapse
Thanks for the reply... the back of the box says this:
Network - HSPA/WCDMA (900/2100 MHz)
GSM/GPRS/EDGE (850/900/1800/1900 MHz) Which is what i thought rogers was.
Rogers GSM network operates on the frequencies of 850/1900 MHz so your 3g should work. Are you running stock rom or a custom rom? Do you know if your phone is rooted? If it's rooted and or you are running a custom rom then make sure your are running the last radio for your device..
Rogers uses 850/1900 HSPA bands not 900/2100 HSPA bands.
You will only get EDGE data.
1point8t said:
Rogers uses 850/1900 HSPA bands not 900/2100 HSPA bands.
You will only get EDGE data.
Click to expand...
Click to collapse
Hmm that's a shame... would you happen to know if it could be used on any other networks with 3g? like wind?
JMAC323GT said:
Hmm that's a shame... would you happen to know if it could be used on any other networks with 3g? like wind?
Click to expand...
Click to collapse
WIND uses 1700 AWS frequency, no providers in Canada use those two frequencies (and god knows why NCIX and other stores are selling the European version to Canadians.) You should really read up on these things before buying a phone.
yeah thanks... i was never told it was an international phone.
Hi,
Seeing as most heroes including mine are on the GSM band of 900MHz and not the 850MHz that for some reason Telstra decided to use in rural areas, is it possible to flash another radio to 'unlock' (right word?) the 850MHz band to allow HSDPA speeds for me as opposed to the Edge network?
If this is possible, does anyone know where to get the radio for this?
TIA
hero doesn't have radio hardware, ain't it?
vijaysapkota said:
hero doesn't have radio hardware, ain't it?
Click to expand...
Click to collapse
and how would you make a call then?
I think he meant FM? It still has that via headphones. Any ideas on topic would be nice though
Sent from my HTC Hero using XDA App
its not possible, as the hero radio hardware itself is not capable of 850mhz umts/3g band.
Unfortunately, theres no way to simply 'unlock' it, as it doesnt exist.
Killafish is SOOOOOO WRONG
Killafish said:
its not possible, as the hero radio hardware itself is not capable of 850mhz umts/3g band.
Unfortunately, theres no way to simply 'unlock' it, as it doesnt exist.
Click to expand...
Click to collapse
So very wrong! Are you serious? You know there is more than one version of the Hero right? Euro, NAM, AU, and CDMA. NAM and AU have 850MHz UMTS.
What about the Telus or Telstra hero's? They use 850 in Canada and in Australia. Why would those carriers sell the Hero if it doesn't have the correct freq for their network? I have a Telus Hero and it has 850UMTS. Seriously, if you don't know the answer, don't say anything.
In my experience the best Radio file for good 850 Reception is the 09.26 radio. If you search you will find it.
Here it is...
I tried posting the radio file but it is too large for XDA. Sorry.
regarding to the HTC site the hero has those freqs:
Code:
Quad-band GSM/GPRS/EDGE:
*
850/900/1800/1900 MHz
and I think these should work with all radio versions.
http://www.htc.com/europe/product/hero/specification.html
but it does not have FM.
I forgot to mention that my Hero is not a native Australian Hero but a UK Hero which means the UMTS frequencies are: 900/2100 MHz.
Will flashing another radio give me 850/2100 MHz? (is the original question I should have asked) Telstra run 850MHz in Rural areas and 2100MHz in metro areas. Why on Earth can't Telcos all run on the same frequencies!?
guy_smiley said:
I forgot to mention that my Hero is not a native Australian Hero but a UK Hero which means the UMTS frequencies are: 900/2100 MHz.
Will flashing another radio give me 850/2100 MHz? (is the original question I should have asked) Telstra run 850MHz in Rural areas and 2100MHz in metro areas. Why on Earth can't Telcos all run on the same frequencies!?
Click to expand...
Click to collapse
No, it won't. The HW says 900/2100, SW won't change that.
Because they're douches. Mine is also the 900/2100, else I would've suggested a swap. :V
Kanzar said:
No, it won't. The HW says 900/2100, SW won't change that.
Because they're douches. Mine is also the 900/2100, else I would've suggested a swap. :V
Click to expand...
Click to collapse
Damn, not what I was hoping for but thanks for the reply
I wholeheartedly agree. Looks like I'll be cracking open the Desire when I get home instead of flogging it off on fleabay
eatmydave said:
So very wrong! Are you serious? You know there is more than one version of the Hero right? Euro, NAM, AU, and CDMA. NAM and AU have 850MHz UMTS.
What about the Telus or Telstra hero's? They use 850 in Canada and in Australia. Why would those carriers sell the Hero if it doesn't have the correct freq for their network? I have a Telus Hero and it has 850UMTS. Seriously, if you don't know the answer, don't say anything.
In my experience the best Radio file for good 850 Reception is the 09.26 radio. If you search you will find it.
Click to expand...
Click to collapse
as has been made clear, he has an Australian Hero which only has 900/2100 3g bands. I probably should have stated I was assuming that when I posted my comment.
The Hero was never sold via carriers in Australia, only through electronic retailers, hence Telstra never actually sold the phone.