Related
Hi !
Has somebody found some solution to reduce the delay for the ringtones for blackstone ?
I've installed the second cab here (http://forum.xda-developers.com/showthread.php?t=258109) as well as write in the registery (av0pw0r), but i can't reduce the delay under (almost) 2 ring tones, eventough i use a *.wma file.
I've also tried to play on HD tweak (1.7 option), but this does not change anything...
This is very annoying me, i've already lost some calls.
I haven"t tried yet a cooked ROM, but i wonder if this would change something
Please help
make sure the ringtone is on the phone and not card. That helped me a lot.
tks for your answer.
But well, i use (for the moment) the "Alarm-Classic.wav" under windows\rings, so i think it's ok from this side
How much delay do u have ?
hi.
using wma ringtones I get a response on my HD in about 1 ring after a soft reset. From the second call on the HD rings at about half a ring to the caller.
three rings from to wake from soft off.
but i forgot to say that if the phone is already "on", the delay is about 1/2 half ringtone, which is acceptable ! .
It seems that the additionnal delay (about 1 sec.) comes from the phone to go from "standby" to "on"
I've always had a delay with every HTC I've had (C500, C600. E650, Touch HD) using standard and custom ROMs with ringtones as WAV's and MP3's on the device and the storage card. I got used to it ages ago and if the phones on my desk can now predict an incoming call before it rings
Hi,
I was also searching for a solution on the ring tone delay issue. Guess that is a winmobile thing.
However there is no delay if you switch off the ring-tone and enable vibration mode only. That is weired behavior of the phone cause why cannot the ring-tone sound as fast as the vibration comes in vibmode only? And why does the vibration comes as late as the ring-tone when in combi-mode?
I am afraid there is no solution so far...
Regs!
this delay is something you'll have to learn to live with, unfortunately. at least in europe people seem to be finding loud and/or dodgy ringtones not very nice, and when dealing with the wiindows mobile vibrate mode is the one to go for.
another suggestion is to set up a caller tune, people are more likely to wait longer when they're listening to music.
ive found i can get it to ring at 1 ring if i turn off caller id pictures on s2u2
Yeah, the operating system does all the checks and clearing up before handling the call to prevent dropping, the way WM handles things, you can't get way from the delay, slowing the CPU with app like a nuedynamicclock worsens it. Well I notice a call before it rings if it is on
SlakerBoi said:
this delay is something you'll have to learn to live with, unfortunately
Click to expand...
Click to collapse
All my wm devices have had this issue. My blackstone lights up from sleep a good 2 to 3 sec. before the first ring. I use the old phone ring tone and have four fairly well spaced rings before vm kicks in. I just count the rings as I get to the phone and it has become a non issue. The hd tweek for it seemed not to have an effect btw. Also I'm with t-mo usa and using their code I have my ringtime set to max rings. which is 30 sec. before vm.
There is a delay between incoming call and actually the phone ringing. Did you notice that as well? I asked my callers already several times how many rings they have heared. Normally 2, and I only heared one. So?
As well there is a small delay between picking up and actually being able to speak... Did you notice this as well?
i'm facing the same problem
Thx for your feedback. So now the question is if there is any reg-hack to speed this up.
I noticed that too.
But if you pay attention, there is a low ring in the background. Make a test in a zero noise environment..
@uterrorista, low-ring? pretty usefull, ha?
@all, pushing up the topic.
pretty bad, if the "waking up" process takes that long so the caller already got something like 3-4 rings until I hear the first ring...
any idea?
Upgrading your Radio should mostly solve this problem. And always try to have your ringtones in main memory rather than storage cards because power to sd card cuts of in standby mode and may take some time to return after awaken by a call.
Regards,
Carty..
With the new radio occurs the same.
Incoming call delay
This may help....
Somethings to consider:
1- I would say the actual ring signal is not always synchronized with the ring back tone we heard. The may come from different system within a complex telecom network. Therefore, some delay is expected as normal functionality in all telephone systems (Fix and mobile ones). What you hear when calling is send by the phone systems you are connected too (i. e. fix phone line of your provider central office systems). What makes your phone ringing is a command (teleco-protocol) sent by the system you are registered-in) So, we do not expect a ring to ring back sync any way.
2- To the previous fact, we should add the wake-up time, ringing tone search and play back as well as picture and info shown on display, call execution inner in the process on your JADE. You may minimize a bit these things, but I would say only a bit if you have the device always awake (battery waste) and your ringing tones are in the main memory.
3- if your phone does not give you radio problem, please do not upgrade it. You may run in problems you did not have before and it will void your warranty.
4- We can go further and add our ear and brain response time.
5- The time that comes for the call to go to diver destination or voice mail, counts from the moment that your phone is seized by your host public system and not from the moment the caller hear the first ring back tone.
Conclusion:
I do not see a real problem as far as it does not go over two ring back tones.
A lot of ringtones are silent about 1 second before they actually start (just like some songs and stuff). That might be your problem?
cPT.cAPSLOCK said:
A lot of ringtones are silent about 1 second before they actually start (just like some songs and stuff). That might be your problem?
Click to expand...
Click to collapse
No, it isnt. Mine is the dafault tone.
If the jade is near a pc monitor, the monitor starts to make interferences two or three seconds before the screen lights up and the tone starts ringing.
yesterday it rang 1x and my caller said he heared the ringtone on his side of the line 5x!!!! wtf!?!?
what can we do to fix this?
Hello my radio version is 0.27.30.09 (from stock)
I too had a 3 ring call delay, i installed jademan superrom (which did not update the radio version , it's still the old one) and somehow the call delay vanished...
Or u can try the reg tweak to set the ring script to "av1pr" using sktools... works well for me..
hope that helps
Raghav_K said:
Hello my radio version is 0.27.30.09 (from stock)
I too had a 3 ring call delay, i installed jademan superrom (which did not update the radio version , it's still the old one) and somehow the call delay vanished...
Or u can try the reg tweak to set the ring script to "av1pr" using sktools... works well for me..
hope that helps
Click to expand...
Click to collapse
Can explain the sk-tweak please?
Sure :d
install the latest sktools, Choose tuneup < phone edition < ring script and typr av1pr... which gives u a very short vibrate and ring... (which fits me cos the ring volume isn't very high and i dont wanna miss calls in noisy areas.. U can see help to modify the script to ur needs)
or if u prefer editing registry, use a registry editor to go to HKCU/ControlPanel/Sounds/Ringtone0/script and change the REG_SZ value to av1pr
annoying incoming call delay
Hi,
i have changed the registry script as people say but no difference. And that's no surprise as if you read the script letter by letter "av1pr" means activate device/vibrate/play ringtone/repeat. The original script "apw3r" again means "activate the phone/play rington/wait 3 seconds/repeat". So the 3 seconds delay happens AFTER the phone plays the ringtone the first time.
However, the activation(with activation I mean to wake up the phone from standby) actually happens always on the beginning of the second ring. I have another phone and I have done few tests calling the jade so I am sure of what I am saying.
By the way, I dont know if you noticed but changing the ringtone changes the script back to the original one. But it doesnt really matter given that this tweak doesnt make any difference.
I have to say instead that disabling the skin dialer allowed me to gain 1 second, and now the phone activates just before the second ring. So I believe that the solution should be found somewhere else and not in the script that everyone keeps talking about.
I think I have read that the superrom doesnt have this problem(jade rom development in this section). What did it change in there? why it doesnt show that?
Any help appreciated
Franco
Actually av1pr means activate & vibrate 1 sec & Ring
apw3r means activate & wait 3 sec and play ringtone
I used to get the caller screen and no ring till 3 sec till i changed that.... i know it resets everytime after u change rt but no prob for me cos i don change RT often and sktools has an easy way of changing it
And i need it to vibrate for 1 sec coz ring volume is a bit low in htc phones..
PS: i'm using superrom too
Raghav_K said:
Actually av1pr means activate & vibrate 1 sec & Ring
apw3r means activate & wait 3 sec and play ringtone
I used to get the caller screen and no ring till 3 sec till i changed that.... i know it resets everytime after u change rt but no prob for me cos i don change RT often and sktools has an easy way of changing it
And i need it to vibrate for 1 sec coz ring volume is a bit low in htc phones..
PS: i'm using superrom too
Click to expand...
Click to collapse
well, the phone follows the sequence of commands so if it is:
apw3r
the phone will a=activate, then p=play ringtone, w3=wait 3 seconds, r=repeat sequence.
So the 3 seconds delay is after the first time the rt is played.
But I have the same initial delay with both scripts it does p**s me off really!
have you tried to use another phone to call your jade with the superrom? how long does it take to play the tone?
well i have tried and my jade starts vibrating by the time the first ring ends( in the phone from which i'm calling)
can u try the decrease ring delay tweak in the mighty enhancements section of this link and see if it works
http://triton.homeip.net/RegistryChanger/
My own experience is that SuperROM made absolutely no difference at all, neither does hacking the ringtone script (as other have said, the "delay" is after the ringtone has started anyway).
What did make a difference in both the stock & superrom firmware was to disable the HTC dialer skin and revert to the WM6.1 caller id bubble. This reduced the average delay to about 1 second. The other variable is whether the phone is in full suspend mode or awake - my phone certainly takes longer to activate from full suspend mode (full suspend being suspend on battery).
Haven't tried the new HTC stock ROM yet, maybe this improves things? I think it will take some changes to the low-level drivers to improve on the 1 second wake-up with WM6.1 dialer (these may be in the new stock ROM, all of the cooked ROMs use low-level drivers from the original stock ROM so will all be the same in this respect).
Raghav_K said:
well i have tried and my jade starts vibrating by the time the first ring ends( in the phone from which i'm calling)
can u try the decrease ring delay tweak in the mighty enhancements section of this link and see if it works
http://triton.homeip.net/RegistryChanger/
Click to expand...
Click to collapse
Absolutely no difference whatsover. Again, the only improvement I can get is when I disable the dialer skin and use the wm default one. Then it rings just before hearing the second tone on the calling line.
To be honest I am not surprised, the registry key that is changed is:
HKCU\ControlPanel\SoundCategories\RingPreview\InitVol
which clearly refers to a volume level and not to a time delay...??
I've just realized that I keep missing calls because it seems to me that the Touch HD takes entirely too long to wake up on an incoming call.
Example:
I called my phone, it rang TWO times before the phone started to wake up, by the time I was able to answer it, it was too late.
Anyway to speed up the waking of this phone on incoming calls. I can't have all these delays. Or is there a way to make it ring LONGER (as a workaround) before going to voicemail?
Does having the phone locked increase the time it takes to wake it up?
Question 2:
It seems like just picking up my phone from my desk answers it. That's no good, sometimes I want to pick it up to look the the caller id but it auto answers upon picking up the phone off my desk. Can this be disabled?
derrickonline said:
I've just realized that I keep missing calls because it seems to me that the Touch HD takes entirely too long to wake up on an incoming call.
Example:
I called my phone, it rang TWO times before the phone started to wake up, by the time I was able to answer it, it was too late.
Anyway to speed up the waking of this phone on incoming calls. I can't have all these delays. Or is there a way to make it ring LONGER (as a workaround) before going to voicemail?
Does having the phone locked increase the time it takes to wake it up?
Question 2:
It seems like just picking up my phone from my desk answers it. That's no good, sometimes I want to pick it up to look the the caller id but it auto answers upon picking up the phone off my desk. Can this be disabled?
Click to expand...
Click to collapse
Try using 3rd party apps like 'Advanced Config', 'HD Tweak' and 'SKTools' to tweak to optimise your HD performance.
I know HD Tweak has the option to enable or disable ring delay for incoming calls
I have tweak HD now. So let me ask you, why would anyone want a ring delay in the first place?
I hate how long it takes to answer a call. Sometimes i answer on the first ring and the caller says "what took you so long?".
What's even worse is, if the phone is doing something and someone rings, i can press the answer button all i like but nothing happens...the phone seems to clogged up with other tasks. This may just be the ROM though, i'm about to flash the new Touch of HD rom so i'll see how it goes.
Gat, I'm pretty sure it's a power issue. Windows Mobile is slow and clunky especially on a 528Mhz processor. Can't wait for tegra or snapdragon. I don't think another rom will help you.
derrickonline said:
I have tweak HD now. So let me ask you, why would anyone want a ring delay in the first place?
Click to expand...
Click to collapse
Personally I don't why, but I can't answer for everyone!
I hate how long it takes to answer a call. Sometimes i answer on the first ring and the caller says "what took you so long?".
What's even worse is, if the phone is doing something and someone rings, i can press the answer button all i like but nothing happens...the phone seems to clogged up with other tasks. This may just be the ROM though, i'm about to flash the new Touch of HD rom so i'll see how it goes.
Click to expand...
Click to collapse
Try using Dutty's Xtreme V1.8 ROM, link below. I haven't experienced any delays since I started using this ROM. May be a coincidence, but worth a try!
With Dutty's V1.8 rom it takes half-a-ring before the screen wakes up, and then a whole ring on silent before it makes any sound. So 1 1/2 rings before I know some-one is calling.
Guys, don't. This is a issue and fixed by HTC, there's a official patch for this problem: htc.com/www/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
fixed my equal problems at once!
The delay is caused by the HTC dialer and all the stuff it needs to load on an incomming call.
If it is a serious problem for you, use HD tweak to change the phone dialer back to WM6. This will give you instant ring on incomming call, but you will lose some features provided by the HTC dialer such as volume control during call, bluetooth notification on top bar,video calling and possibly mute on face down.
If you don't want to use HD Tweak the reg key is
HKLM\security\phone\skin_enabled
Option is 0 (disabled) 1 (enabled)
Soft reset to make the changes.
ardsar said:
The delay is caused by the HTC dialer and all the stuff it needs to load on an incomming call.
If it is a serious problem for you, use HD tweak to change the phone dialer back to WM6. This will give you instant ring on incomming call, but you will lose some features provided by the HTC dialer such as volume control during call, bluetooth notification on top bar,video calling and possibly mute on face down.
If you don't want to use HD Tweak the reg key is
HKLM\security\phone\skin_enabled
Option is 0 (disabled) 1 (enabled)
Soft reset to make the changes.
Click to expand...
Click to collapse
Hi, I tried this from HDTweak but it did not seem to make a difference. The phone still takes about 1.5 rings before it starts to ring itself. I have lost the bluetooth icon.
Hmmm - I think I will just go back to the HTC dialer
This post should be deleted, but I don't know how.
Sorry
This is a issue and fixed by HTC, there's a official patch for this problem: htc.com/www/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
fixed my equal problems at once!
Click to expand...
Click to collapse
bazzxdahtc, I can't find the patch for this issue under your link
This one should work: http://www.htc.com/europe/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
Look for:
- Hot fix for improving the on-screen slider feature for answering calls
and
- Hot fix to enhance response time for HTC Touch HD
These two made my HD work a lot better then before! I used to miss calls often due to the lag in answering incoming calls.
bazzxdahtc said:
This one should work: http://www.htc.com/europe/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
Look for:
- Hot fix for improving the on-screen slider feature for answering calls
and
- Hot fix to enhance response time for HTC Touch HD
These two made my HD work a lot better then before! I used to miss calls often due to the lag in answering incoming calls.
Click to expand...
Click to collapse
These 2 fixes have nothing to do with the famous 2 ring delay. The response time improvement was to solve the latency when using the keyboard - ie sometimes it would appear to freeze. The second fix is for the slider only.
Suggest you guys do a bit of searching as there are a lot of threads relating to this famous 2 ring delay with wm6. The first incomming call always seems to take a bit longer after the phone has been switched off or soft reset - did you try and see what the delay is several times? Appologies that using the wm6 dialer did not work for you - it certainly does for me and many others.
Just trying to help...
I run stock ROM(1.14.404.3(V2227)NLD)+regular updates/patches and this works on my device, you doubt my experiences?
Have you actually tried these yourself? Or are you just reasoning from your cooked ROM...
Suggest you stay nice to everyone.
No i dont doubt your experience apart from the fact that htc fixes are not specific to the 2 ring delay. It also has nothing to do with the fact im using non stock rom .i applied these tweeks to the standard rom before flashing my device. if you do a search for 2 ring deLay, you will see that this is a common problem. Also other sites such as www.pocketshield.netserver01.com/readme.aspx make reference to this exact problem
I'm only tryin to help, and ive spent a lot of my time investigating this issue.
Just a quick thought.. do you have an MP3 assigned as ringtone? I recently added an MP3 ringtone and suddenly it took a lot longer before the phone started ringing..
Changed it back to one of the standard tones and it was much faster.
I agree about the MP3 issue.
I often see my Touch HD waking up to handle the call 1-2 seconds before I hear the ringtone. As soon as the dialler skin is up (or S2U2 application) then I am able to answer the call without the MP3 ring kicking in.
Before I use S2U2, Pocketshiel and Inesoft programs in the same time..it takes at least 4 seconds to starts ring. but now only S2U2 its only 1 sec.
Guys I'm using 1.19.831 stock ROM, applied ONLY Slider hotfix from HTC, ringing with mp3 file (around 900kb size) and do these tweaks in HDtweak and Advanced Config 3.3:
Incoming ring delay = no;
Battery icon in phone menu = no;
Filesystem cache: enabled
Filesystem cache size: 8 mb;
File system filter chace: 131072 sectors;
Glyph cahce: 64 kb;
The delay is around 1.5 ring BEFORE it start ringing. 1 ring before display answer slider. I'm not 100% sure if all of above settings have any connection with the problem, but with these one --> a whole 1 ring delay is gone away...
I've noticed my phone always starts to ring at where I set the volume to and then escalates to be very loud after a few seconds. I didnt see any settings to change this. Is this happening to anybody else?
Is it in your pocket when it does that?
I noticed in the HTC Sense demo video it says if it is in your pocket or purse it will ring loud so you can hear it. I think it has to do with proximity and light sources. If i have it sitting out, it will ring quietly, but it is always loud in my pocket.
adamr240 said:
Is it in your pocket when it does that?
I noticed in the HTC Sense demo video it says if it is in your pocket or purse it will ring loud so you can hear it. I think it has to do with proximity and light sources. If i have it sitting out, it will ring quietly, but it is always loud in my pocket.
Click to expand...
Click to collapse
Actually yeah. Thats usually when it gets loud. I dont really like that as it gets super loud sometimes. Why wouldnt they have a setting for this?
Any news on this? Because I also find it quite annoying that the ringer is so loud even when I'm sitting in the quiet office...
alphanimal said:
Any news on this? Because I also find it quite annoying that the ringer is so loud even when I'm sitting in the quiet office...
Click to expand...
Click to collapse
I have the same issue! It happens on ALL Sense ROM's. If I am running AOSP (CM6 or MIUI) it is not an issue. Are there any ways to disable this setting if it is supposed to do so? Mine is on my belt in a case and when I'm in the office it rings way too loud. If the phone is on my desk it rings as I have the volume set.
Actually I found you can disable the loud ringer in settings really easy
Settings --> Sound --> Pocket mode
There's no way to adjust the volume though,
Apparently the Shift has the same issue as my EVO or as Sprint would call it..."feature".
http://forum.androidcentral.com/showthread.php?p=669629#post669629
You would think there was an app out there to override this.
alphanimal said:
Actually I found you can disable the loud ringer in settings really easy
Settings --> Sound --> Pocket mode
There's no way to adjust the volume though,
Click to expand...
Click to collapse
What device/ROM are you running? There is no setting for Pocket mode under settings -> sound on the stock EVO Shift 4G (at least not on mine). Anyone else find this?
I have a Desire Z with the original ROM (Froyo + Sense)
alphanimal said:
I have a Desire Z with the original ROM (Froyo + Sense)
Click to expand...
Click to collapse
that setting dont apply to shift
Did a complete wipe 2x using Amon Ra Recovery 2.3 and then flashed a stock image file from HBOOT and updated WiMAX, PRI & NV Radio. The issue was not present on the stock ROM. Wiped the stock ROM and flashed Myn's RLS5.....no more issues. Something was corrupt and enabled the sensor to trigger ring loud (when covered or senses low light) as it is designed to do on the Shift. The EVO does not have Pocket Mode in settings. Whatever the cause.....it is now resolved!
I sent a tweet in the direction of @htc about this yesterday, but they haven't answered. Hopefully we get an update that gives us a 2.x release of sense, not this weird "you have some of the features of new sense but not the whole package." The other feature that I know is there is the one where you can flip the phone over to silence the ring, and in fact, BOTH features are undocumented - the user manual for the shift doesn't mention declining a call by flipping the phone OR the word pocket except in warnings about where not to keep it.
I don't have any hope of a satisfactory answer, though, because in an earlier answer to someone about bugs, they said to submit something at htc.com/support and make sure to mark it a bug report - you can't do that anywhere on the email form and the other two options for support aren't things you "submit." The two times I've contacted them by email were also tremendous disappointments, so... there you go.
Tried to second your post on HTC's support forum but their forum software is misconfigured and my email server is rejecting their mail because it is not a fully-qualified hostname. Meh. Like you, I don't hold out enough hope of a fix to bother with the registration process.
You mentioned flip to silence, but there is actually a setting on the Evo Shift 4G to silence the ringtone when the phone is moved. It's under settings - sounds, and it is "quiet ring on pickup". Since the action of flipping the phone involves moving it, I wonder if you are seeing that setting working when you flip your phone over. My phone stops ringing (if it's not in a pocket) when I pick it up off the table. It doesn't decline the call, it just stops the ringer.
Edit: eh, I made an allowance on my mail server so HTC's misconfigured SMTP server could send my activation message and let me register.
By the way, I posted a workaround on Android Central that works for the way I use the phone. I created a silent ringtone. Then I set the phone to vibrate as well. So in my pocket I feel/hear the vibration but I don't get the ridiculously-loud rings. But I can hear my notifications at normal volume. When the phone is on my desk, the vibration and screen lighting up are enough of an alert for me. Obviously this won't work if you ever keep the phone in a bag or somewhere that you can't hear or feel the vibration, but it works for me as a pocket user.
Three ticks up from silenced on the volume rocker:
Picking the phone up off my desk quiets the ring, flipping it silences the ring. I wonder if turning off quiet ring on pickup will turn off flip to silence... might as well try it.
aaand no it doesn't. Pickup didn't quiet (per the setting now being off) but flip still did silence the ring.
Interesting note: flip-to-silence is actually a silencer; it doesn't decline the call immediately.
http://community.htc.com/na/htc-forums/android/f/112/t/9935.aspx
For anyone else that wants to weigh in on the issue on the official HTC support forum. Maybe they won't ignore us too hard.
nurrwick said:
Three ticks up from silenced on the volume rocker:
Picking the phone up off my desk quiets the ring, flipping it silences the ring. I wonder if turning off quiet ring on pickup will turn off flip to silence... might as well try it.
aaand no it doesn't. Pickup didn't quiet (per the setting now being off) but flip still did silence the ring.
Interesting note: flip-to-silence is actually a silencer; it doesn't decline the call immediately.
Click to expand...
Click to collapse
Ok, makes sense - since I use a silent ringtone, the "quiet" and "silent" are the same to me, LOL. But yes, it doesn't decline the call.
I actually liked the Touch Pro2 where flipping during a call would turn on the speakerphone. Why can't they keep good features like that instead of forcing this new stuff down our throats with no option to turn it off.
Bump/Update: After two tweets on the issue and an entire week of the post I made sitting on the HTC forums, I have had enough of being ignored and went to the email support option.
I'm not resetting my phone again, so I instead borrowed the New Issue text from Google Code project pages and sent steps to duplicate.
Anybody else that might have this problem is welcome to weigh in; I gave links to this thread and the one over on Android Central in my forum post on HTC, which is linked in the support message I sent.
Another update: Today I received my response; I don't have to reset my phone (yet) and my concern is being escalated to whatever the next level of CS is called.
They say escalated department is first-come, first-served, so it may be a while before I know more.
The problem is that HTC sees this as a feature, not a bug. They market this as a way to hear your phone when it's in a bag. While it makes perfect sense to us end-users to have an option to turn this off, from a lab testing standpoint it's not a priority because the function works as designed. If HTC had really thought this through, they should realize that there are some things phones should never do, and ringing at maximum volume unless specifically directed by the user is one of them.
The funny thing is that I'd like almost the exact opposite behavior. I'd prefer the phone to ring (quietly) on my desk, and automatically switch to vibrate when it's in my pocket (as determined by the prox sensor). But people who carry their phones in bags or purses wouldn't benefit from this option. Everybody's needs are different; HTC just determined what they think is the most common scenario and coded Sense that way. I have to give them credit for thinking up the idea, but since it doesn't work for everyone it should be more flexible.
Thanks for taking the time to bring this to their attention. It may well be that a couple of generations of phones from now we'll start seeing more options in these settings, which would be fantastic.
Update: HTC has been calling me at work, once yesterday once today. I have not been at work this week but will be in tomorrow; they gave me a number to call if I wanted to get in touch with them sooner. I will be calling them back as soon as I'm done with my planned tasks tomorrow (assuming they haven't called me first).
Here's hoping news about when we get an update that stops this nonsense comes swiftly!
A very strange and random thing has started to happen to my Nexus S - I like to keep my phone on vibrate / no ring but about a week ago, everytime I make a call and hang up or a call comes in and ends, the profile will automatically switch from vibrate to ring.
This has been very annoying as it has caused my phone to ring at a meeting for example and at night when I'm sleeping. Has anyone had this problem? I haven't loaded any new programs that might affect ringtone...the only thing I have that controls ringtone in any form would be widgetlocker and TouchPal dialer - I've tried default dialer and it does the same thing as well.
Might be something obvious so if anyone knows, please inform me. Much appreciated!
im experincing the same thing on HTC Desire CDMA as well......it annoying as hell....i work for a funeral home and cant really have my phone to ring
The culprit is...
Touchpal. I have it as well, and I have this same problem. Checking reviews since the last update, which just so happened to be when this problem started, a lot of people are mentioning it.
i have the same issue, any solution??