Database Users

Rebuilding TMobile - Can I go straight to 1.1???

I have totally hosed my TMobile device and I am looking to rebuild straight to the 1.1 build instead of going back to TMobile first (although that may be an option)...
If I can reflash with the TMobile ROM (256k or so), which files and how would I load the system up with the 1.1 build???
Or would I be better off rebuilding to TMobile original and then running the executable to load the 1.1 build???
Any help would be appreciated...
Todd

OldManTodd said:
If I can reflash with the TMobile ROM (256k or so), which files and how would I load the system up with the 1.1 build???
Or would I be better off rebuilding to TMobile original and then running the executable to load the 1.1 build???
Click to expand...
Click to collapse
Not sure I understand. The 256 k you're referring to is the size of the bootloader, maybe? You don't need to change the bootloader, it's fine the way it is.
Unless it's a 5.17 bootloader, in which case you may want to replace it with something more 'userfriendly', so to speak (5.17 has a feature to prevent you from easily flashing the device, we hacked said mechanism, but it's still a hassle)..
Anyway: your goal is to replace the OS. If your device still talks to ActiveSync, just run Jeff's exe file that installs our Special Edition ROM v1.1 and you're all set. If it does not, get an SD-acrd reader/writer for your PC, and use XDArit and the bootloader method to flash your ROM.

Got the card reader....
I am back at ground zero.. The 256 is the actual baseline from what I understand....
Basically the first step to upgrade is to backup the ROM and that is what is toast...
At this point I can't get to activesync, the device just resets it self over and over again (albeit it slowly)...
I have a version 5.15 bootloader, I am ok there...
I am going to search around in here to use XDARit (downloaded already) and try to find the bootloader method to flash my ROM (I am trying to find a good copy of the TMobile ROM now)..
Thanks for any assistance you can lend...
Todd
update - I can't seem to locate the Bootloader Method you are referring to?? - Todd

If you drag to winzip, you'll see the v1.1 Special Edition ROM nbf-file in there. You can just read that to SD-card using XDArit, and you'll be all set. No need to first install T-Mobile's ROM.

I downloaded the exe already...
basically at this point I formatted my only backup due to the only card avail is 128meg...
I will run the XDArit now....
After I write to the card, what do I do on the phone to load the software from the card???

Re: I downloaded the exe already...
OldManTod said:
After I write to the card, what do I do on the phone to load the software from the card???
Click to expand...
Click to collapse
Simply insert the card and boot into bootloader (pressing power while resetting), and it will ask you to press the action button if you want to flash the contents of the card. The action button is the center of the big rocker key.

man alive!!! I can't win....
XDARite is blowing off when trying to write to the SD card...
To use XDARite you just use the Fat format??? I am rebooting with card in writer so that the volume will show on startup...
I have a Lexar Card reader and trying to run XDARite from XP and selecting the ~32 meg .nbf file from Jeff's update....
Thanks again for any thoughts...
Todd
p.s. You are a busy poster today

Re: man alive!!! I can't win....
OldManTod said:
XDARite is blowing off when trying to write to the SD card...
Click to expand...
Click to collapse
Blowing off ?? I'm afraid I'm not familiar with this terminology.
To use XDARite you just use the Fat format??? I am rebooting with card in writer so that the volume will show on startup...
Click to expand...
Click to collapse
No, the card is written to in RAW mode by XDArit, so XDArit destroys any file-system present on the card when it writes to it. It says so on the page, just read...
p.s. You are a busy poster today
Click to expand...
Click to collapse
Look who's talking!

XDArit not writing to USB device....
that is where I am stuck at... for some reason, I can read/write to the card, but XDARit cannot....
Has anybody experienced this before with XP and an External USB device????
T

mine was fine. i used xdairt to load the image. actually for me my activestink disconnected while i was loading the rom image and i had to use sd card.
alex

hi there, oldmantodd,
my usb sd-card reader is also not working, but i managed to rebuild my xda in the following way:
first thing you need is another xda/mda whatever
second you boot this device in bootloader mode, press the rec-button ( the one on the side) and choose backup ce
once you backupped this devices operating system, just boot your wrecked device in bootloader mode with the sd-card containing the backup
now it asks you if you want to download teh ce from sd card,
just confirm this and after a while your device is fine again..
jope this helps!!
best regards tim

not work if using 5.17 bootloader, i have 2 xda (1 damage) and 256m sd card, any suggest how to solve this problem?
i dont have card reader, getting frustasion,plsss help
thz

USB Lost connection during upgrade
For those who noticed this "Lost USB COnnection" problem during the installation of the ROM. I found that as long as you don't resit the unit, just carefully disconnect it from the usb, move the mouse over the active sync icon by your clock so it dissapears or you only have 1 left. (restart if needed if none are there) and than reconnect the update program will resume the upgrade or restart it. I noticed this problem on 2 rom updates. On one of the times I actually had to re-run the update program after I reconnected the usb sync cable (cradle)
Flished perfictly well!
I have bootloader 5.15
If someone has the ORIGINAL (any version is good to me) of T-Mobile's Rom's as mine got screwed before I could back them up... Hence the reason for my upgrades... I would love it if you could leave me a note as I really could use the originals to re-install.

Hey Tim...
Is that the same as going to boot mode and the pressing contacts and writing ce+boot???
I am at the point where I have probably got to start from the very beginning...
I tried the method of writing ce+boot from another device and then flashing mine and no luck...
I am starting to get desperate....
Thanks for any help...
Todd

yeah, it is the same as pressing contacts and write boot+ce, after that is written ob the sd-card just put that sd-card in your damaged device and boot it in bootloader mode.
it will then say something like sd-card contains boot+ce, do you want to download, the press the action button and there you go - your damaged device is being flashed and everything should be ok..
good luck

I tried that this morning....
is it possible I hosed my device beyond recognition???
T

I can get to usb flash mode...
would that do me any good???
Right now... the device comes up with unrecognized card and then sits for a while with the keyboard and the error screen to enter a name for the card... and after a bit it soft resets and goes through the same thing...
T

Ok, sounds like you didn't boot to the bootloader... If you do a hard reset (the little button with the battery indicator above it) and hold the power button (the button on the top left) while you turn it back on it will start the boot loader. Make sure your card with the Boot+CE writen to it is in the expansion slot before you do this and it will automatically start in the Autoload screen. Just push the action button (the control pad straight in) to start.
Hope that bit helped.

You can get to the bootloader from the soft reset button...
as well...
When I do that of course I get to GSM error....
Can anyone verify to rebuild from the ground up from another device I would follow these steps:
Boot Good device from power+soft reset
At menu press contacts button
at the flash tools menu select CD+Boot to SD
Let the software write to the SD then remove card
On my device (which needs rebuilt)
Press Power and Boot
Unit will detect info on card
and just press action button
That is my understanding, however, there are other options on the flash tools menu that I have not investigated...
Any help as always would be appreciated...
Todd

Re: You can get to the bootloader from the soft reset button
OldManTod said:
Boot Good device from power+soft reset
At menu press contacts button
at the flash tools menu select CD+Boot to SD
Let the software write to the SD then remove card
On my device (which needs rebuilt)
Press Power and Boot
Unit will detect info on card
and just press action button
Click to expand...
Click to collapse
The sequence above should work (I assume you know 'press power and boot' means keeping the power button pressed while soft-resetting).
You could write only CE to SD-card, no need to transfer the bootloader. If the above works, it means the receiving device has a functioning bootloader, if it doesn't then it won't be able to take the new bootloader.

Bootloader method question

I have a dead XDA (died while reflashing - some problem with the USB connection) !
I believe that I -may- be able to recover via an SD card. I have read what I can find, but I am not clear about this.
The instructions for flashing the ROM "bootloader" way assume that I can dowload my existing ROM to the SD card and then (I suppose) boot from the SD card?
Since the ROM is trashed (I assume) due to the flash failing, I also assume that I have no viable ROM image to load onto the SD card...?
Is there a URL I can inform myself about this? I've browsed all over this site but can't find anything that seems to address my situation.
I use MSN Messenger if that is easier: [email protected]
I'm really depressed...
Mtks

There's a set of tools here for writing a ROM image to SD-card. Click here to read more.
Using this tool you can write an any ROM image file to an SD-card. The only drawback is that you'll need an SD-card reader-writer attached to your PC, or access to another XDA with functional ROM to do the writing.
Pain in the ass, but if you're willing to accept the current geo-political situation as it is, then this is really nothing to get depressed over...

Hi.
Well I have a card reader, but since my XDA screen is a mess I don't have access to another XDA.

Ariel said:
Hi.
Well I have a card reader, but since my XDA screen is a mess I don't have access to another XDA.
Click to expand...
Click to collapse
AS far as the ROM goes you can build your own just make it a .nb1 file. visit: http://cuba.calyx.nl/~jsummers/ROMkitchen
The screen being messed up shouldn't be a problem just put the SD card into the XDA and hold the power button while doing a soft reset. You’ll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
HTH

Qman:
Many thanks, I needed this spelled out. Hopefuly last question for now:
Which is the ACTION key? CONTACT or CALENDAR button? (there is no such named key on the XDA)
cheers,
Justin

Well what a performance... dodgy card reader, problems over the maximum memory size of the media, not working then working after re-boot....
I'm surprised i cracked it, but I did.
I eventually found the right combination of device and file and cooperative card reader to finally see the ROM (which was cooked at Jeff's Kitchen amd selected as an .nb1 type file rather than an EXE file) copy over to the 128mb SD card.
On insertion into the XDA and re-boot I got the dialogue you described.
I decided that the ACTION key is the navigator key at the bottom of the unit pressed that and the restore began.
I even seem to have managed to RESTORE from an STG backup once I made sure that the personal details (device name) were renamed to the original machine (not Pocket_PC)
Well thanks -very-much for the help. (I only wrote the above to maybe help someone else in the future, who may have the same questions as me).
Now I can go back to playing with the ROM set-up.
I suppose I am right in saying that the ROM version currently at Jeff's Kitchen does not include XDA DEV v1.2?? It certainly doesn't behave as described (the start up tutorial is still there). Also the keyboard option makes the space bar disappear...!!
Thanks to Peter Poelman and Qman.
Cheers

Ariel said:
I suppose I am right in saying that the ROM version currently at Jeff's Kitchen does not include XDA DEV v1.2?? It certainly doesn't behave as described (the start up tutorial is still there). Also the keyboard option makes the space bar disappear...!!
Click to expand...
Click to collapse
I think you may have checked 'Large keys' and 'use gestures'. See the keyboard options to set it like you're used to. (Althoug I prefer 'large keys' and 'use gestures').

Yes, you're right. I will have to get another copy as I don't like it.
Do you happen to know whether v1.2 is being used at Jeffs Kitchen? he first option)
Cheers

Ariel said:
Yes, you're right. I will have to get another copy as I don't like it.
Click to expand...
Click to collapse
Or just turn it off once after cold-boot...
Do you happen to know whether v1.2 is being used at Jeffs Kitchen?
Click to expand...
Click to collapse
Special Edition ROM v1.2 is just the last ROM we built before offering everyone the option of cooking their own ROMs in the ROMkitchen. So I guess you could look at ROMkitchen as a continously evolving "Special Edition ROM 2.x", if you will.

CAB problems

Hello, i am trying to HardSPL my Tmobile wing. I was told to install thre cabs but i cannot. When i try to install them it says "installation was unsuccesful". Is it possible to flash my phone without it or ues USPL or something. Any help would be appreciated.

what cabs do you mean, are you talking about the yang cabs, please explain

How to HardSPL
livndeadgrl13 said:
what cabs do you mean, are you talking about the yang cabs, please explain
Click to expand...
Click to collapse
The three that you have to install, of course! Here's an amazing guide by Apreincher, with the CAB's included. Try re-downloading the CAB's and installing them. Tell us the specific errors that you get, too!
Steps to flash using HardSPL: (PDF Version)
It is a good idea to flash back to stock ROM just to be safe. If you are using a T-Mobile Wing you can download it from T-Mobile or from this guide. If it's a herald you can download it from this guide.
It is important that your IPL is 4.xxx or Higher. If it is not, do not attempt a HardSPL it WILL brick your phone. You can find out the IPL by going into Bootloader:
While holding the camera button do a soft-reset by pressing the stylus into the reset hole next to the volume slider. Release the reset switch while still holding the camera button. A colored screen will come up listing your IPL and SPL. If next to IPL it says 4.xxx or higher, proceed to step 2.
Reset back into your normal phone OS.
Go to Settings- Connections- USB to PC and check the checkbox on that page.
Install the 3 CABs in this order:
Canon Yang.cab
ASerg Policies.cab
Disable Security.cab
Soft reset the phone.
Download the HardSPL folder, extract it, and place it on the Desktop.
Run ROMUpdateUtility.exe located in the HardSPL folder. Update the ROM using the steps on the screen. The screen will become white, but wait until the phone reboots itself. It could be 10-15 minutes.
Phone should boot back into some strange looking ROM. This is the HardSPL ROM. So far so good.
Check your SPL by going to bootloader again. If it says 4.70.yang, you are good as gold and HardSPLed.
Okay so now how do I flash after I'm in HardSPL?
There are actually two ways to flash while you are HardSPLed. You can use the flash center method or the SD card method. Most LZX and Micro ROM's require you to flash through the SD card method.
Flash Center with HardSPL:
Open the HardSPL folder and remove the .nbh file that is located in there. Replace it with the .nbh file you downloaded with your favorite ROM.
Run ROMUpdateUtility.exe
You've installed a custom ROM on HardSPL.
Flash through SD Card with HardSPL:
Unfortunately, sometimes this can be a bit more complicated. Make sure you use an SD card and not an SDHC card.
Your storage card will hopefully be lower than 4 GB, or else it might have trouble locating the file. If your storage card is larger, you can partition it to be smaller. Also, no SDCH cards will work.
You must format that storage card to FAT32.
Now, you download the ROM (and uncompress it if it’s a .7z, .rar, or .zip file).
Place the downloaded and uncompressed ROM file (.NBH) into the root of your storage card. Also, you must rename it HERAIMG.nbh. (Captialized)
Put the SD Card into your phone, and with your phone turned on, hold the camera button down. While holding the camera button, press and release the soft reset button. Keep holding the camera button until a new, white screen appears.
If it displays a white screen with blue text that says Checking SD contents and then Update Image proceed to step the next step.
If it immediately goes into the colored bootloader screen, it appears your phone's bootloader is not finding your SD card. Some SD cards require special formatting for some reason. Plug the SD card into your computer using an SD card reading and right click on Computer and click Manage. Click Disk Management on the right pane. Select the SD card from the list and right click and select Format. Under Allocation Unit Size, select 4096. Format and ignore any errors. Proceed with steps 2-4. If it does not work even with this adjustment, your SD card might be too slow. Or you have a SDHC card which isn't easily recognized by bootloader.
This screen that you’re on will have a white background, with blue letters. It will search for your HERAIMG.nbh file, and once it finds it, it’ll give you 10 seconds to answer yes.
To flash the ROM, when it asks you if you want to flash this, press down on the volume slider. Weird, eh? Just do it.
Now, let it flash for a good 10 minutes.
Success! Press any key. Press down on the volume slider again, and you’re on the color screen now. Hold the power button to turn off the phone, and then turn your phone back on. Welcome to your new ROM!
If you are already HardSPL and something happens and flashing doesn't work and you find that your phone appears to be off and won't turn on. Don't panic. Go into Bootloader and use the Flash Center directions to flash a ROM.
--------Thanks to Apreincher for the AMAZING write up!!!!!!!!!!!!!!!!

I tried it just says installation was unsuccesful

afo88 said:
I tried it just says installation was unsuccesful
Click to expand...
Click to collapse
Which CAB and what order? Give us more info.

The cabs posted in the tut u gave me
1. Canon Yang.cab
2. ASerg Policies.cab
3. Disable Security.cab
Ive even tried them from another download source. I tried it in the or der that was said it just says "installation of ......... was unsuccessful" and delets the CAB. I also noticed that when i go to add or remove programs noyhin shows up on the list.

This is the easiest way to flash!!!

This is how I've done it and it's my third rom in 5 days.
1. Format you micro SD to FAT32 using a USB card reader, not quick format preferably
2. Read CID from your SD with Qmat while connected with active sync
3. Get Gold Card using QMat with the CID obtained, you should have in 2 min
4. Write GoldCard image to SD using Write Image in Qmat, while connected using active sync
5. Run the stock ROM of your choice form your desktop and you're done!!!
WORKS LIKE CHARM
RKS LIKE A
MY HD2 - east european unbranded
PS you can flash both your regional rom or any other rom

...except that it's been said hundred of times in the stycky threads.

wmfreak said:
This is how I've done it and it's my third rom in 5 days.
1. Format you micro SD to FAT32 using a USB card reader, not quick format preferably
2. Read CID from your SD with Qmat while connected with active sync
3. Get Gold Card using QMat with the CID obtained, you should have in 2 min
4. Write GoldCard image to SD using Write Image in Qmat, while connected using active sync
5. Run the stock ROM of your choice form your desktop and you're done!!!
WORKS LIKE CHARM
RKS LIKE A
MY HD2 - east european unbranded
PS you can flash both your regional rom or any other rom
Click to expand...
Click to collapse
Are you joking? OMG. Please look to to "Sticky"-Threads before opening a new Thread.
http://forum.xda-developers.com/showpost.php?p=5038443&postcount=1
Cause you are a new user, you should take a look at this video:
http://www.albinoblacksheep.com/flash/posting
It will help you to understand how a community works.
Mod, please close.

The OP has condensed & removed all the bumpf from the link, sometimes too much information is confusing to a LOT! of people. Cost? 2 cents!

Pailea said:
The OP has condensed & removed all the bumpf from the link, sometimes too much information is confusing to a LOT! of people. Cost? 2 cents!
Click to expand...
Click to collapse
There's a difference between condensed and incomplete. The post doesn't even mention where to get QMAT, or were to apply for the actual goldcard. The least OP could've done was post a link to the sticky thread.
Aside from that, I would personally advise easily confused people to stay away from QMAT, especially if all they have is half a tutorial.

Thank you. Clear and simple. (Have to combine information from the sticky post
http://forum.xda-developers.com/showthread.php?t=591314
as well thought)
Will try it later on.
UPDATE
After trying unsuccessfully for more than two weeks to flash a different language ROM, and reading this post I have managed to flash the new 1.6x ROM in 5 minutes.
Notes
Used the same MicroSD card I have been using unsuccessfully the last two weeks, and the same goldgard I had for two weeks now.
The goldcard remains the same no matter how many times you format the SD, and immediately after the completion of the installation of the new ROM needs reformat. Can be reused as many times as we want I guess.
THANK YOU

crazy cat said:
Are you joking? OMG. Please look to to "Sticky"-Threads before opening a new Thread.
http://forum.xda-developers.com/showpost.php?p=5038443&postcount=1
Cause you are a new user, you should take a look at this video:
http://www.albinoblacksheep.com/flash/posting
It will help you to understand how a community works.
Mod, please close.
Click to expand...
Click to collapse
New user dude?
It appears that we joined about the same time. It was meant to help the new people not annoy "know it all" people like you. It must have gotten to your head. Just remember you were a "new" once too.

Apparently i did something similar to your way, and it works. The way posted in the Guide is not working for many people, this might be a good option for those who are at the brink of giving up to flash their device to 1.61.

This works! I didn't even format my SD card! Thank you

does not work for me. I have tried all combination, all possible thing. still not working.

Hi wmfreak.
Worked first time and so easy. Was going to try the long winded hex editor etc way but this was much easier.
No format of SD card required either as stated above!
THANK YOU!
What i did...
1) Downloaded qmat from link at top of the page... http://forum.xda-developers.com/showthread.php?t=591239
2) Downloaded getsdsn1_leo.zip from http://forum.xda-developers.com/showpost.php?p=5169107&postcount=109
3) Installed qmat to PC
4) Extracted getdns_leo.zip with exe to desktop.
5) Ensure phone connected in sync mode (not drive mode) and ensure synced (with either activesync (win xp) or mobile device center (vista/win7)
6) Run exe from getdns on desktop whichs dump A txt file with CID to desktop.
7) Registered my CID and email as per top link on http://forum.xda-developers.com/showthread.php?t=591239
8) Recieved img file from register and saved to PC.
9) Ran Installed QMAT Program from Pc with Phone still synced to PC
10) In QMAT ran Menu >Hardware Forensics>WINCE SD Card Utils
11) Pressed button <Get SD Card Serial and Disk ID>
12) Once the ID was found I pressed button <Write ImageFile> in same dialog box.
13) Searched for my previously saved from email .img file called goldcard.img
14) BINGO! Gold IMG wrote successfully to card.
15) Downloaded 1.61 ROm from these forums and ran exe from rar from pc and off it went updated with no issue in normal rom update method!!!
P.S UK user with unlocked SIM phone.
UPDATE: Just relised u dont need the getdns_leo.zip - just run qmat to step 11 then register for the GOLDid and come back to qmat to write img!!

I too succesfully flashed to the TUR version from WWE West Europe version. I followed the guide on page 30 on the 1.61 WWE TUR thread, which essentialy is the same thing.
Thnx, I appreciate your post!
Grtz
Lukas

citrix80 said:
does not work for me. I have tried all combination, all possible thing. still not working.
Click to expand...
Click to collapse
In active sync connection, Just try extracting the new rom package to a desktop folder and run rom update from that folder

Jmarley said:
In active sync connection, Just try extracting the new rom package to a desktop folder and run rom update from that folder
Click to expand...
Click to collapse
TIP. I did not extract the new ROM package. I executed the Turkish ROM as it was from my desktop and worked fine.

don_theo said:
TIP. I did not extract the new ROM package. I executed the Turkish ROM as it was from my desktop and worked fine.
Click to expand...
Click to collapse
hum.. I did not extract the ROM file. I just start execute the ROM image I downloaded, it start to flash, the phone automatically turn into bootloader, then phone show the percentage, at 1%, it stopped, phone reboot, screen on pc, says ''invalid vendor ID".
I have tried 2 different SD card. all possible combinations. still not working.

citrix80 said:
hum.. I did not extract the ROM file. I just start execute the ROM image I downloaded, it start to flash, the phone automatically turn into bootloader, then phone show the percentage, at 1%, it stopped, phone reboot, screen on pc, says ''invalid vendor ID".
I have tried 2 different SD card. all possible combinations. still not working.
Click to expand...
Click to collapse
Hello, that is why I combined information from the sticky thread
http://forum.xda-developers.com/showthread.php?t=591314
Probably you have to
--a: install a regedit software on your Leo e.g. PHM regedit original PHM Site (offline at the moment)
--b: Run the regedit software
--c: Goto HKEY_LOCAL_MACHINE\Security\Policies\Policies
--d: Look for 00001001 double click it and change the setting from 2 to 1
--e: Reboot the HTC LEO
and from this thread
4. Write GoldCard image to SD using Write Image in Qmat, while connected using active sync
5. Run the stock ROM of your choice form your desktop and you're done!!!
This the the procedure that worked for me. (steps for obtaining a GoldCard not mentioned here).
Good Luck.

worked for me too,

sorry for being thick guys but....if i flash my rom do i have to use the same memory card as what im using now or can i use another just to flash??
obviously using the one i have now i will delete all of my apps when formatting??

Use another sd
Correct, or backup your current sd.
waiting2lose said:
sorry for being thick guys but....if i flash my rom do i have to use the same memory card as what im using now or can i use another just to flash??
obviously using the one i have now i will delete all of my apps when formatting??
Click to expand...
Click to collapse

Same here:
Got the goldcard.img from qmat directly saved onto SD card and tried to flash the official HTC_GER_1.48 onto my VDF device. Vendor error, can't flash

HD2 with T-Mobile brandet HELPPP!!!

I am stuck at to power on the device with vol down pressed.
All I got is the tri-color bootloader screen and the "00028002 NOT ALLOW" message and than starts the tri-color no menu to flash if I fry with the load file from device...If I use the .exe file with the new room I get the tri-color than the "00028002 NOT ALLOW" ant the flush starts till 1% and after that.....T-mobile mist is starting again.
Here the link's that I followed:
http://forum.xda-developers.com/showthread.php?t=591314
http://www.handy-faq.de/forum/htc_hd...e_aendern.html
Please help me with your suggestions what can I do or if a HSPL is on the was as for the HD Blackstone.
Still looks that I need your help MASTARS!!!...Thanks mates.

Hi, there is a mistake in the manual. For a hardreset you have to press volup and voldown together and than press the power button.

HD2 T-Mobile brandet
I have follow your suggestions...I get the manufactury restore message and the unit is loading the original T-Mobile image....I am stuck...
Please help

sounds like your trying to flash the device with another ROM, if so do a search for leo gold card this will allow you to flash original htc ROMs only until hard spl is finished.

HD2 T-Mobile brandet
You are right...I have purchased this unit (over 600 Euro) and I needed in English.
I have done the Gold card procedure with two different micro-SD cards and still no success...now I am powerless and really mad...what is the next step???
I hope that this issue can be solved only with your help MASTERS OF HTC Phones

What problem do you have with the micro-sd ? what about formatting the sd-card, have you done it in the quick modus or in the normal mode ? And why did you read a german discription, when you're from canada ?

HD2 T-Mobile brandet
HIPP HIPP HUREYYYYY
Is done.
please follow the usual instruction on this link....plus ...IMPORTANT, pay attention also to this steps listed below
http://forum.xda-developers.com/showthread.php?t=591314
Format SD card from within WinMo
Place LEOIMG.NBH on the SD card
Read CID with QMAT
Request GoldCard.img with CID, I believe I did not change the first 2 numbers
Write the goldcard to the SD, by having ActiveSync active, and "Write Image" in QMAT.
Reboot to boot-loader by Volume down and power button ate the same time
Reconnect your HD2 to your PC start active sync and run the new room extracted locally on your PC (bubble click on "ROMUpdateUtility.exe" and also do not forget that on this package the "LEOIMG.nbh" is also there renamed form original format.
Many thanks to all of you working to solve our dummies problems.
I wish you also success to get the HSPL soon up and running..
Best regards

tomtom140 said:
HIPP HIPP HUREYYYYY
Is done.
please follow the usual instruction on this link....plus ...IMPORTANT, pay attention also to this steps listed below
http://forum.xda-developers.com/showthread.php?t=591314
Format SD card from within WinMo
Place LEOIMG.NBH on the SD card
Read CID with QMAT
Request GoldCard.img with CID, I believe I did not change the first 2 numbers
Write the goldcard to the SD, by having ActiveSync active, and "Write Image" in QMAT.
Reboot to boot-loader by Volume down and power button ate the same time
Reconnect your HD2 to your PC start active sync and run the new room extracted locally on your PC (bubble click on "ROMUpdateUtility.exe" and also do not forget that on this package the "LEOIMG.nbh" is also there renamed form original format.
Many thanks to all of you working to solve our dummies problems.
I wish you also success to get the HSPL soon up and running..
Best regards
Click to expand...
Click to collapse
did you have to rename the signedRUU.NBH to LEOIMG.nbh when flash from PC?

HD2 T-mobile brand
Yes ...I have renamed the signedRUU.NBH to LEOIMG.nbh
Still ..I must say that after testing all day I was not taking the chance to go with the original signedRUU.NBH...so I have renamed the file

u mean ur device starts at the first image?
use gold card?
brick?
have u flash another official rom before?

HD2
I have flush many official rooms on HD blackstone
I have follow all steps in my link ...plus I had to go with the steps posted previous in order to flush my T-Mobile branded unit.
Yes I had to use the gold card as in description plus the registry ending from 2 to 1
bqwd36 said:
u mean ur device starts at the first image?
use gold card?
brick?
have u flash another official rom before?
Click to expand...
Click to collapse