[KERNEL] 2.6.29 Kaos AOSP kernel OC/BFS/EXT4 - Droid Eris Android Development

This is for all the devs using my kernel in their roms.
This is the same as my last kernel with Zanfur's OC patches included.
The attached file is *JUST* the kernel, you can't flash it in recovery.
This kernel now also has the Latest .316 BFS Scheduler(thanks to Decad3nce's backport) and EXT4 support.
If you like my work, think about donating to my coffee fund.

Great work!
I will try it.
Just waiting for new WhiteWidow,

test889 said:
Great work!
I will try it.
Just waiting for new WhiteWidow,
Click to expand...
Click to collapse
im flahing 3.0 rifght now

you rock kaos. thanks a ton

Andrizoid said:
you rock kaos. thanks a ton
Click to expand...
Click to collapse
Not a problem

checked md5sums, had a corrupted file i guess, re downloaded and its working fine
again, you rock!

New kernel up with BFS and EXT4 now.

sounds good. if the mods will get back and unlock my thread maybe i can update...

could we get a flashable file of this kernal?

ramseyja said:
could we get a flashable file of this kernal?
Click to expand...
Click to collapse
The problem is the ramdisks are different for each ROM, so it'll need to be combined with the ramdisk for that build.
You can flash it with fastboot though over your already installed rom.

punk.kaos said:
The problem is the ramdisks are different for each ROM, so it'll need to be combined with the ramdisk for that build.
You can flash it with fastboot though over your already installed rom.
Click to expand...
Click to collapse
thanks for the quick answer. I saw with the last rev of your kernel there was a link for a flashable, that why i asked. i wanted to flash over darchstar's kernel in cyanogen, see if there was any improvements. i"ll try the fastboot maybe tonight.
again thanks

punk.kaos said:
The problem is the ramdisks are different for each ROM, so it'll need to be combined with the ramdisk for that build.
You can flash it with fastboot though over your already installed rom.
Click to expand...
Click to collapse
I tried to flash the imgage through fast boot (I did rename the img to PB00IMG.zip) and I got the blue progress bar on the right side like it was flashing, but when I went to see if the kernal took, it did not replace darchstars kernal. Any thoughts?

jonathanphx1 said:
I tried to flash the imgage through fast boot (I did rename the img to PB00IMG.zip) and I got the blue progress bar on the right side like it was flashing, but when I went to see if the kernal took, it did not replace darchstars kernal. Any thoughts?
Click to expand...
Click to collapse
dude, you need to do this. keep the zimage file on your computer. boot with volume down, then hit send to enter fastboot. then on your pc type fastboot boot zImage

phydo said:
dude, you need to do this. keep the zimage file on your computer. boot with volume down, then hit send to enter fastboot. then on your pc type fastboot boot zImage
Click to expand...
Click to collapse
thanks for the post I will try this later tonight when I get home. Does the zimage go in your tools folder?

jonathanphx1 said:
thanks for the post I will try this later tonight when I get home. Does the zimage go in your tools folder?
Click to expand...
Click to collapse
yes. i just did this according to phydo's instructions, worked very easily.
thanks phydo
edit doesnt stick after reboot, reverts back to old kernel. how can i get it to stay?

Has this been working for people running CE v1.1 over darch's kernel? If so, has it improved your battery life at all?

sorry
ramseyja said:
yes. i just did this according to phydo's instructions, worked very easily.
thanks phydo
edit doesnt stick after reboot, reverts back to old kernel. how can i get it to stay?
Click to expand...
Click to collapse
Yo dude sorry. that's just to boot the kernel. to actually flash it you type fastboot flash zimage zimagefile

phydo said:
Yo dude sorry. that's just to boot the kernel. to actually flash it you type fastboot flash zimage zimagefile
Click to expand...
Click to collapse
thank you. just tried it and worked. i learned a bit more about android today. thanks

ramseyja said:
thank you. just tried it and worked. i learned a bit more about android today. thanks
Click to expand...
Click to collapse
me too, thank you

wifi
hey just wondering Kaos if theres any ETA when wifi will be working again...no rush just wondering how things were going.

Related

[Kernel][FroYo] Captivate Kernel + CWM + Voodoo + Custom Boot Image

ALL CREDIT GOES TO ATINM FOR CREATING THIS(and allowing me to share)
Thanks To Kaik541 for being awesome....and being the main tester
Atinm currently has bigger fish to fry then this Kernel, therefore
THIS ISNT BEING SUPPORTED FOR FURTHER DEVELOPMENT
Kaik541 said:
guys, the "unsupported" part of this doesn't mean development has stopped or stalled, it means do not expect things like changelogs or walkthroughs. me and warri can help you troubleshoot, but installing this is done so at your own risk with no promises it will work.
Click to expand...
Click to collapse
Atinm has created a very nice Kernel, and has allowed me to share it with the Public. HOWEVER, there is no support offered, we have done some testing and it works for us, this does not mean we guarantee it will work for you:
Included:
Modified ClockworkMod Recovery to replace Stock 3e (Backup/Restore with Voodoo Enabled)
The Voodoo Lagfix
Captivate Kernel
Custom Boot Image Support (place any WVGA bootanimation.zip in either /system/media or /data/local thanks Kaik)
How To Install :
Download File From Link Below
Place the Link on your /sdcard/ (internal)
Flash through ROM Manager, or ClockworkMod Recovery
Enjoy the VooDoo Lagfix
If you are having issues with installation please follow KaiK's Instructions found here (can be used on 1.14)
Download:
http://github.com/atinm/captivate_multistage_initramfs/downloads
**Disclaimer** I am not responsible for anything that is done to your device. This is provided as is, I hold no liability for your actions.
I hate you wArri atinm, I just got Voodoo into my custom kernel...
Ok, well, guess this is no longer being worked on, I feel better now..
oh snap!
Flashing time again. mmmmmmm
THANKS!!
warri said:
ALL CREDIT GOES TO ATINM FOR CREATING THIS
Atinm currently has bigger fish to fry then this Kernel, therefore
THIS ISNT BEING SUPPORTED FOR FURTHER DEVELOPMENT
Atinm has created a very nice Kernel, and has allowed me to share it with the Public. HOWEVER, there is no support offered, we have done some testing and it works for us, this does not mean we guarantee it will work for you:
Included:
Modified ClockworkMod Recovery to replace Stock 3e (Backup/Restore with Voodoo Enabled)
The Voodoo Lagfix
Captivate Kernel
How To Install :
Download File From Link Below
Place the Link on your /sdcard/ (internal)
Flash through ROM Manager, or ClockworkMod Recovery
Enjoy the VooDoo Lagfix
Download:
http://github.com/downloads/atinm/captivate_multistage_initramfs/cwm-ext4-v1.11.zip
**Disclaimer** I am not responsible for anything that is done to your device. This is provided as is, I hold no liability for your actions.
Click to expand...
Click to collapse
I'm working on CyanogenMod6 for our phones and this happened to by on the way there because I was futzing in recovery so I put it out as ppl seemed to be asking for Voodoo support in Froyo. If it doesn't work for you, don't worry - the performance difference between stock RFS and Voodoo on Froyo isn't as significant as it was with Eclair (the 'Q' number is near 1400 rather than above 1700 - I guess still somewhat better than stock).
-Atin
atinm said:
I'm working on CyanogenMod6 for our phones and this happened to by on the way there because I was futzing in recovery so I put it out as ppl seemed to be asking for Voodoo support in Froyo. If it doesn't work for you, don't worry - the performance difference between stock RFS and Voodoo on Froyo isn't as significant as it was with Eclair (the 'Q' number is near 1400 rather than above 1700 - I guess still somewhat better than stock).
-Atin
Click to expand...
Click to collapse
haha, he posted this right as I finished up my Kernel, was about to update to beta9... heh
Thanks again you warri and atimn for all your hard work and help, will be applying this to my setup.
designgears said:
I hate you wArri atinm, I just got Voodoo into my custom kernel...
Ok, well, guess this is no longer being worked on, I feel better now..
Click to expand...
Click to collapse
It's cause I'll do it a whole different way next time. But don't let me stop you from working on the kernel, the more ppl who take up the slack the better so I can focus on what I need to work on (CyanogenMod!).
designgears said:
haha, he posted this right as I finished up my Kernel, was about to update to beta9... heh
Click to expand...
Click to collapse
Are you still going to post beta 9? I can't wait to try it!
airbillion said:
Are you still going to post beta 9? I can't wait to try it!
Click to expand...
Click to collapse
yup, just doing some final testing
AHHHH Thanks a million. I've been waiting for this since Froyo hit. Looking forward to B9 DG. Thanks for all the hard work guys!!
designgears said:
I hate you wArri atinm, I just got Voodoo into my custom kernel...
Ok, well, guess this is no longer being worked on, I feel better now..
Click to expand...
Click to collapse
You can work on the colorfix, and I believe you had the bootanimation.zip incorporated into your kernel?
Bowsa2511 said:
You can work on the colorfix, and I believe you had the bootanimation.zip incorporated into your kernel?
Click to expand...
Click to collapse
colorfix can't be done without sources and this kernel will have aosp bootanimation.zip support soon as well.
and speak of the devil, anyone wanting AOSP boot animation support, use this kernel here:
http://github.com/downloads/atinm/captivate_multistage_initramfs/cwm-ext4-v1.14.zip
same as above, flash in CWM, place any WVGA bootanimation.zip in either /system/media or /data/local
Kaik541 said:
colorfix can't be done without sources and this kernel will have aosp bootanimation.zip support soon as well.
Click to expand...
Click to collapse
That's right.. can't wait for our froyo source
Kaik541 said:
and speak of the devil, anyone wanting AOSP boot animation support, use this kernel here:
http://github.com/downloads/atinm/captivate_multistage_initramfs/cwm-ext4-v1.14.zip
same as above, flash in CWM, place any WVGA bootanimation.zip in either /system/media or /data/local
Click to expand...
Click to collapse
Is that a ext4/lagfix + bootanimation kernel only?
Is it 2.2, and does it have recovery 2e?
Kaik541 said:
and speak of the devil, anyone wanting AOSP boot animation support, use this kernel here:
http://github.com/downloads/atinm/captivate_multistage_initramfs/cwm-ext4-v1.14.zip
same as above, flash in CWM, place any WVGA bootanimation.zip in either /system/media or /data/local
Click to expand...
Click to collapse
Does that mean we can use custom boot animations now?
Bowsa2511 said:
That's right.. can't wait for our froyo source
Is that a ext4/lagfix + bootanimation kernel only?
Is it 2.2, and does it have recovery 2e?
Click to expand...
Click to collapse
All of the above. But CWM recovery is default, you can boot into 2e if you want from that. I prefer CWM recovery as my default, so that's how it is.
atinm said:
All of the above. But CWM recovery is default, you can boot into 2e if you want from that. I prefer CWM recovery as my default, so that's how it is.
Click to expand...
Click to collapse
With bootanimation support.. I assume unsigned .zips are supported?
It seems to hate clockwork... it won't install no matter whick way I flash it in clockwork
sent with mental telepathy
(CDE ROM + OCLF +z4mod)
Bowsa2511 said:
With bootanimation support.. I assume unsigned .zips are supported?
Click to expand...
Click to collapse
these two things are unrelated, bootanimation.zip goes on your phone, unsigned zips are run from recovery. this kernel as clockwork as the default recovery.
DOAlaboratories said:
It seems to hate clockwork... it won't install no matter whick way I flash it in clockwork
sent with mental telepathy
(CDE ROM + OCLF +z4mod)
Click to expand...
Click to collapse
works fine for me, but you can also try renaming it to update.zip and trying that way... the only way to tell if it's working is with a custom boot animation or verifying the output of build.txt in the root of the phone
Kaik541 said:
these two things are unrelated, bootanimation.zip goes on your phone, unsigned zips are run from recovery. this kernel as clockwork as the default recovery.
works fine for me, but you can also try renaming it to update.zip and trying that way... the only way to tell if it's working is with a custom boot animation or verifying the output of build.txt in the root of the phone
Click to expand...
Click to collapse
no dice that way either.all the update-script text comes up, says it's done flashing the kernel, and then reboots, but the name of the kernel doesn't change. plus when i tried as update.zip it stuck at the boot screen and i had to flash an older kernel to get it to boot.

[AnyKernel][MOD] Tbolt Kernel Updater

Ihtfp69 tip toes in and closes the door
I realized after releasing a ROM that no one was using Koush's AnyKernel method for flashing kernels. This poses a problem for ROMs with custom ramdisks. Someone mentioned the AnyKernel method did not work on this phone. So I did some investigating. With a few changes to the script, I have it working perfectly.
Credits here, of course, go to Koush. I just modified his script. The kernel zip attached here contains the kernel from the latest leak. Because this uses the AnyKernel method, you can flash this on ANY GB Sense ROM and it will work and not break WiFi.
EDIT: I guess Ziggy did a version as well a few months ago. Here is a link to his: Ziggy's AnyKernel MOD
Download Mine --> Tbolt_AnyKernel.zip
a true asset to this community.
thanks for all your hard work!
cant wait for skyraider zeus v2
Sense ROMs only?
jc
ihtfp69 said:
Ihtfp69 tip toes in and closes the door
I realized after releasing a ROM that no one was using Koush's AnyKernel method for flashing kernels. This poses a problem for ROMs with custom ramdisks. Someone mentioned the AnyKernel method did not work on this phone. So I did some investigating. With a few changes to the script, I have it working perfectly.
Credits here, of course, go to Koush. I just modified his script. The kernel zip attached here contains the kernel from the latest leak. Because this uses the AnyKernel method, you can flash this on ANY GB Sense ROM and it will work and not break WiFi.
Download --> Tbolt_AnyKernel.zip
Click to expand...
Click to collapse
Surprised to see you here? Glad to see your support for the community.
mrchambo said:
Sense ROMs only?
jc
Click to expand...
Click to collapse
Yes, it's the stock kernel from the new leak, which is Sense.
Okay, thank you. That's what I thought...
jc
Applying this gave me bootloops in Gingervitis 1.2.1 GB. Won't go past the splash screen
mrchambo said:
Sense ROMs only?
jc
Click to expand...
Click to collapse
The scripts should work on AOSP and Sense ROMs. The kernel included is Sense only.
JaydenR said:
Applying this gave me bootloops in Gingervitis 1.2.1 GB. Won't go past the splash screen
Click to expand...
Click to collapse
Hmmm ... it shouldn't matter, but I will wake a look and see if I can duplicate it. Make sure the file you downloaded is around 3.4 MB. If not, grab it again.
First download was 2.89 second was 3.4 I believe. Both had the exact same result. Boot loops
Ziggy already did this for the tbolt. Ive been using anykernel for over a month now. It what iuse when i extract the kernel from synergy.
fixxxer2008 said:
Ziggy already did this for the tbolt. Ive been using anykernel for over a month now. It what iuse when i extract the kernel from synergy.
Click to expand...
Click to collapse
Is he sharing? I seem to be misinformed then. Why is everyone else still using boot.img files then?
ihtfp69 said:
Is he sharing? I seem to be misinformed then. Why is everyone else still using boot.img files then?
Click to expand...
Click to collapse
yeah it's under the thunderbolt section at ppcgeeks. been there for awhile now.
http://forum.ppcgeeks.com/htc-thunderbolt-development/143287-anykernel-thunderbolt.html
cool beans. I'll just link to his then.
What is the purpose of this kernel updater?
I'm not sure I understood how Ziggy explained it.
johnnysyeah said:
What is the purpose of this kernel updater?
I'm not sure I understood how Ziggy explained it.
Click to expand...
Click to collapse
lol! Gotta love Ziggy but, he definitely thinks on a higher plane than most! I have trouble following him lots of times as well.
ihtfp69 said:
Ihtfp69 tip toes in and closes the door
I realized after releasing a ROM that no one was using Koush's AnyKernel method for flashing kernels. This poses a problem for ROMs with custom ramdisks. Someone mentioned the AnyKernel method did not work on this phone. So I did some investigating. With a few changes to the script, I have it working perfectly.
Credits here, of course, go to Koush. I just modified his script. The kernel zip attached here contains the kernel from the latest leak. Because this uses the AnyKernel method, you can flash this on ANY GB Sense ROM and it will work and not break WiFi.
EDIT: I guess Ziggy did a version as well a few months ago. Here is a link to his: Ziggy's AnyKernel MOD
Download Mine --> Tbolt_AnyKernel.zip
Click to expand...
Click to collapse
I just tried this, and it broke Wifi on my Tbolt. Any idea what the reason could be? I extracted the Zimage from my target ROM, replaced it in the .Zip, and flashed it. Anything else I should be doing?
onyx_64 said:
I just tried this, and it broke Wifi on my Tbolt. Any idea what the reason could be? I extracted the Zimage from my target ROM, replaced it in the .Zip, and flashed it. Anything else I should be doing?
Click to expand...
Click to collapse
You need to pull the bcm from /system/lib/modules also.
Sent from my SHIFTAO5P using XDA App
DroidTh3ory said:
You need to pull the bcm from /system/lib/modules also.
Sent from my SHIFTAO5P using XDA App
Click to expand...
Click to collapse
oh, yeah, forgot to mention that I copied the 2 files (bcm4329* and sequans*) from the target ROM into /system/lib/modules After I had flashed. Should I have copied it to the .zip first and then flashed it? does it sit anywhere other than /system/lib/modules?
The reason i didnt do it is because I assumed the existing files should work.
onyx_64 said:
oh, yeah, forgot to mention that I copied the 2 files (bcm4329* and sequans*) from the target ROM into /system/lib/modules After I had flashed. Should I have copied it to the .zip first and then flashed it? does it sit anywhere other than /system/lib/modules?
The reason i didnt do it is because I assumed the existing files should work.
Click to expand...
Click to collapse
The bcm spits out at the end of compiling the kernel and it is specific to the kernel. Pull the zimage and the modules from the ROM, put them in the correct folders in the zip ... Wipe Cache and Dalvik for kicks and flash. Should be fine.
Sent from my SHIFTAO5P using XDA App
DroidTh3ory said:
The bcm spits out at the end of compiling the kernel and it is specific to the kernel. Pull the zimage and the modules from the ROM, put them in the correct folders in the zip ... Wipe Cache and Dalvik for kicks and flash. Should be fine.
Sent from my SHIFTAO5P using XDA App
Click to expand...
Click to collapse
Wow man.. you are quick. Let me try that way. Thanks so much!
UPDATE:
That worked like a charm!.. Flashed with the lib/modules after wiping cache n dalvik. Thanks again!

[ROM] 2.3.5 Tweaked stock KJ1 with extended power menu-cwm flashable-and ROOT

*******The new, new KJ2 is out, get it here http://forum.xda-developers.com/showthread.php?t=1297223
I just put together a quick ROM with the new KJ1, its pretty much stock with a little color.
Nothing special, and this will be the only one I do.
I flashed it and it installs and runs fine, no problems so far.
Deodexed, zipaligned, rooted
****Here is the link for root, just flash it with clockwork mod and you are good to go, forgot to add busybox and su to system\xbin.****
http://dl.dropbox.com/u/44737360/Root.zip
And here is the link for those that want the Galaxy S sound back.
http://dl.dropbox.com/u/44737360/Power_on.zip
It has
The new Boog KJ1 kernel 1, no init.d. Thanks Boog!!! You're a machine.
extended Power menu
circle battery
crt animation
some color
translucent status bar pulldown
tethering
thats it...
Make sure you are on gingerbread boot loaders and have Boogs KJ1 Kernel tar installed http://forum.xda-developers.com/showthread.php?t=1294849
Copy the zip file to your sdcard and flash with clockwork mod.
As always, I am not responsible if it messes up your phone.
http://www.mediafire.com/download.php?ns84kz8a8j6wwpa
I know it's been deodexed, but has it been zipaligned?
Kyuta Syuko said:
I know it's been deodexed, but has it been zipaligned?
Click to expand...
Click to collapse
Yeah, guess I should put all of that, huh?
crt60 said:
Yeah, guess I should put all of that, huh?
Click to expand...
Click to collapse
Maybe people have started assuming it already, but wouldn't hurt.
ok excellent
please get dropbox. there is a link in my sig.mega upload sucks.
could you please upload file on http://multiupload.com/
megaupload don't work now
mirotvorets said:
could you please upload file on http://multiupload.com/
megaupload don't work now
Click to expand...
Click to collapse
I was going to set up a dropbox account soon.
I'm getting errors saying that my phone isn't rooted.
afrojoc said:
I'm getting errors saying that my phone isn't rooted.
Click to expand...
Click to collapse
Hmmm, I added superuser.apk, maybe I will use a newer version, let me try it and I will post a fix in the first post soon.
For some reason the su binary isn't installing, I have to go get ready for work so I won't be able to mess with it until tonight.
I will have to remove the rooted part in the first post.
EDIT:Fixed, forgot to add busybox and su to system\xbin. I thought I did that, but obviously I didn't, all good now...
I also got the errors about my phone being rooted. When i went to update the superuser binary with the superuser app, it gave me a failure... I think the issue is with the binary. Flashed the fuguroot kernel, then re-flashed the boog kernel and all was well. Love the ROM, by the way. Especially the battery icon, and changing colors
nbell13 said:
I also got the errors about my phone being rooted. When i went to update the superuser binary with the superuser app, it gave me a failure... I think the issue is with the binary. Flashed the fuguroot kernel, then re-flashed the boog kernel and all was well. Love the ROM, by the way. Especially the battery icon, and changing colors
Click to expand...
Click to collapse
Thanks, I don't think busybox is installing either, thats what I get for making changes and not testing things and just taking them for granted it will work.
I'll fix it tonight when I get home...
thats not a big deal! once you get that corrected then i'd be more then happy to use this rom!
Is there a way to get rid of the thunderstorm/rain sound that plays on boot up? I prefer a silent boot up screen (without taking my system volume all the way down)
Edit: Nevermind, found it.
nbell13 said:
Is there a way to get rid of the thunderstorm/rain sound that plays on boot up? I prefer a silent boot up screen (without taking my system volume all the way down)
Edit: Nevermind, found it.
Click to expand...
Click to collapse
Yeah, I don't know how I got that in there, its a part of Boogs kernel with the new fire boot animation, pretty cool, but not really stock.
crt60 said:
Yeah, I don't know how I got that in there, its a part of Boogs kernel with the new fire boot animation, pretty cool, but not really stock.
Click to expand...
Click to collapse
Weird, mine never showed that fire boot animation... And of course, KJ2 just leaked out
Can someone reupload this ROM? I just wanna have to H+ symbol on my phone, and only this leak has it xD
pwneman said:
Can someone reupload this ROM? I just wanna have to H+ symbol on my phone, and only this leak has it xD
Click to expand...
Click to collapse
I'll fix the link when i get home this evening.
Also Fusion kk4 has the h+ symbol too.
Sent from my SAMSUNG-SGH-I897 using xda premium
crt60 said:
I'll fix the link when i get home this evening.
Also Fusion kk4 has the h+ symbol too.
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Thanks. I'm not really a fan of the fusion theme. Just like keeping as close to stock gingerbread as possible. Is there any significant difference between KK4 and KJ1? My KK4 Odexed Rom was kinda slow on gaming..i just need an all rounded rom..
pwneman said:
Thanks. I'm not really a fan of the fusion theme. Just like keeping as close to stock gingerbread as possible. Is there any significant difference between KK4 and KJ1? My KK4 Odexed Rom was kinda slow on gaming..i just need an all rounded rom..
Click to expand...
Click to collapse
I believe Fusion has a stock revert theme, if you can't find it in the thread I can upload it for you but in either case I can't do anything til later this evening. I'll hook you up one way or another. So no ICS?
Sent from my SAMSUNG-SGH-I897 using xda premium

[mod][PATCH][AROMA] ROM_PATCH v1.2 for ics- full freedom

thanks a lot to amarullz for providing aroma installer, and thanks to nightshack0 I have taken his installer and modded to work according to my need but dont think that I have just copied and pasted the installer
had you ever feel that another galaxy s variant's forum have a ics rom which suits all your need but you cannot flash it because it is not yet ported to your device but now all this will not happen again with this patch you can install which ROM you want to flash there will be no boundation for you.
if you are getting status 7 or getprop error then a little work from your side is needed
extract the rom to a folder then go to /extracted folder/META - INF/com/Google/Android
from there open updater-script and remove all getprop lines
come back to META - INF folder and delete all three files
zip the file and flash it in recovery
NOTE:- to edit updater script use jota text editor(android), notepad++(windows)
Click to expand...
Click to collapse
this patch will let you flash other I9000 or t959 roms I have not tried it on other variant but you can try and let me know if it works, I have tried to flash a nexus s rom and it was not flashing so just flash and let me know there is no harm no soft brick no hard brick just physical button will not work until you flash this patch or another rom
Click to expand...
Click to collapse
how to use this patch:- first flash the rom you wanted then this patch and if rom is not flashing read the FAQ
Click to expand...
Click to collapse
download link
*AROMA compatible v1.2:- http://bit.ly/rompat12 (39mb)
* AROMA compatible v1.1:- http://bit.ly/JpHy83 (41mb)
* CAPRIVATE patch v1.0:- http://db.tt/35H5A9mH
Click to expand...
Click to collapse
PROS:- 1.flash which ics rom you want
2. new world with more rom have been revealed
3. rom chefs work have been reduced because now they do not need to port their rom.
4. small size just 12mb
5. TWRP kernel is pre bundled thanks to KRARVIND
Click to expand...
Click to collapse
CONS:- 1. you cannot get the build properties(build.prop) of the rom you are flashing instead you will get the build property which will not be related to any ics rom
Click to expand...
Click to collapse
the patch do not contains any file which can cause a bug and patch will only work on ics roms not gb
For further clarification read FAQ on second post
update:- keep the thanks coming guys and I will add the support of aroma installer and new things just keep me encouraged by pressing thanks
Click to expand...
Click to collapse
update 2:- hi all if you like my work please rate this thread with 5 stars and also submit it as news tip
Click to expand...
Click to collapse
update:- flashed fascinate rom by editing updater script and without resigning got it booted up but it cleared my efs folder so was not getting any network coverage, I got very depressed tried cleared data restore nandroid but nothing works then I thought about efs and with the backup I copy imei files to efs folder and after reboot I got coverage now I will not flash any fascinate rom just for testing but I can say that fascinate rom are working
Click to expand...
Click to collapse
PATCH FAQ
FAQ
Q.:- how to use this installer
Ans:- don't worry about this all the instruction have been given in the installer you just need to flash the package in recovery it is just like installation wizard of windows
Click to expand...
Click to collapse
Q.:- will this also work on gb rom
Ans:- no the patch contains a kernel which cannot work with gb rom
Click to expand...
Click to collapse
Q:- while flashing a galaxy s ics rom I got an error of assert failed what to do.
Ans:- first flash this patch then go to advance and select reboot recovery with new TWRP recovery flash the rom then again flash patch
Click to expand...
Click to collapse
Q.:- why you provided custom build.prop.
Ans:- if build.prop will not be provided then rom's build.prop will change you device's build properties which will not letyou flash files specially created for captivate
Click to expand...
Click to collapse
Q.:- can I flash another captivate ics kernel
Ans:- yes you can flash
Click to expand...
Click to collapse
Q.:- can I flash a kernel I9000 or T959
Ans:- no you cannot flash
Click to expand...
Click to collapse
Q.:- can you give some info about TWRP kernel
Ans:- a bigmem kernel with 720p recording patch originally can be found in Slim Ice rom thanks KRARVIND for this
Click to expand...
Click to collapse
Q.:- what can happen if I forgot to flash this patch
Ans:- nothing serious just the physical keys (menu, back etc.) will not work except this everything will be normal just boot to recovery and flash the patch and keys will work again
Click to expand...
Click to collapse
Q.:- I like your work where can I donate you
Ans:- my work is not that much to be donated and I got pocket money from my father I am just a teenager of seventeen just press thanks button and rate this thread with 5 stars, I will be happy
Click to expand...
Click to collapse
Q.:- Is there any modem provided Ans:- no, there is no modem in the package and will be provided in next update following in 3-5 days
Click to expand...
Click to collapse
WHAT'S NEW
v1.2
1. added bootanimation support
2. removed 30 data fix script
3. added vold.fstab
4. added shutdown charging animation files
5. only single modem is there to decrease size of the patch
6. added a new splash screen
v1.1
1. Added support of AROMA INSTALLER (thanks AMARULLZ)
2. Updated Semaphore kernel
3. Removed some unwanted files
4. Added some Init Scripts
5. Removed Lib files
6. Added Modem.bin
tested roms
a list of tested roms is here
1. infinitum (currently ported)
2. myics ultimate fusion
3. galaxy s cm9 kang build
4. team icssgs
Interesting. Will check it out
Sent from my SGH-I897 using xda premium
Interested to try this out... waiting for link. I'm feeling daring today.
edit: thread updated while I was posting- I'll report back when I try it out.
cool... So where is the link?
Sent from my SGH-I897 using XDA
guys I have just created the thread it will take time to complete link have been added
oooh whats this lol
sorta like Hellraiser from the infuse forum
Cool it's there yeah let's see )))))
Sent from my SGH-I897 using XDA
Really? Wow! that sounds awesome!! Gonna try it for sure.
Any feedback? Lol
Just to clarify
I flash this after ANY ICS rom on Any(galaxy s) Phone?(Such as Galaxy s II) Or Just for vibrant?
Also I flash the patch first then the rom Of My choice? Or what o.o
[email protected]$$ GONNA TRY THIS OUT NOW!
Sent from my SGH-I897 using xda premium
Can somebody explain how the hell I use this o.o Im confused
patrick8996 said:
Can somebody explain how the hell I use this o.o Im confused
Click to expand...
Click to collapse
Hi confused! I'm perplexed. Would like to this as well.
Sent from my SGH-I897 using xda premium
shaker2k said:
Hi confused! I'm perplexed. Would like to this as well.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Lol Guess Im gonna try it o.o
Gonna flash this patch and find advanced(wherever that may be) and then flash an SGSII Rom
patrick8996 said:
Lol Guess Im gonna try it o.o
Gonna flash this patch and find advanced(wherever that may be) and then flash an SGSII Rom
Click to expand...
Click to collapse
I think it's just i9000 and i9020 (google nexus). Not sure though.
swayjd said:
I think it's just i9000 and i9020 (google nexus). Not sure though.
Click to expand...
Click to collapse
damn it o.o
so i can flash a nexus one ics rom on my cappy? i dont get it
@OP, can you explain us what this does?

[rom]cm9-motorioxt720-2.5.28-beta update.

This rom is base on milestone on xda . You can view the thread about CM9.
work:
phone
sms
camera
not work:
fm
...
I NEED HELP : THIS ROM CANT OVERCLOCK BY ADD INT.D if add int.d when setting-processor the phone will be reboot. i dont why ?
http://kuai.xunlei.com/d/CNFKEGTGFIRH
Help on the download link.
napnau said:
Help on the download link.
Click to expand...
Click to collapse
Just click the text "cm9..." and give us feedback.........
B_e_n said:
Just click the text "cm9..." and give us feedback.........
Click to expand...
Click to collapse
Will it work on our XT720? Thanks for the help man.
lwxddlqkillapp said:
I NEED HELP : THIS ROM CANT OVERCLOCK BY ADD INT.D if add int.d when setting-processor the phone will be reboot. i dont why ?
http://kuai.xunlei.com/d/CSVUYGDTSJBN
Click to expand...
Click to collapse
Which overclock.ko and symsearch.ko are you using? It could be that you have incompatible ones. The Milestone (A853) has the 2.6.32 froyo kernel, but we're stuck with 2.6.29 eclair kernel. In particular symsearch.ko had to be adapted for 2.6.29. The versions on our github have been modified and recompiled for 2.6.29: https://github.com/CyanogenModXT720...sholest/tree/gingerbread/prebuilt/lib/modules (note that overclock.ko requires a working symsearch.ko is loaded first)
I installed it and it is pretty good at the first look. You can install it using the xt720 bootfix, the only thing missing are gapps and i tried installing them after, but it doesnt work for me. Average RAM is about 50-60 M and it runs pretty smooth, hope to see more from you soon
EDIT: After reboot the gapps appeared
Mioze7Ae said:
Which overclock.ko and symsearch.ko are you using? It could be that you have incompatible ones. The Milestone (A853) has the 2.6.32 froyo kernel, but we're stuck with 2.6.29 eclair kernel. In particular symsearch.ko had to be adapted for 2.6.29. The versions on our github have been modified and recompiled for 2.6.29: https://github.com/CyanogenModXT720...sholest/tree/gingerbread/prebuilt/lib/modules (note that overclock.ko requires a working symsearch.ko is loaded first)
Click to expand...
Click to collapse
Thanks Mioze7Ae, I will try it...
But I used the overclock.ko and symsearch.ko are adapted for 2.6.29....
spitcuba said:
I installed it and it is pretty good at the first look. You can install it using the xt720 bootfix, the only thing missing are gapps and i tried installing them after, but it doesnt work for me. Average RAM is about 50-60 M and it runs pretty smooth, hope to see more from you soon
EDIT: After reboot the gapps appeared
Click to expand...
Click to collapse
Thanks
So what is not working???
B_e_n said:
Thanks
So what is not working???
Click to expand...
Click to collapse
Nothing so far. Battery life also seems to be much better than in fj's one. The only thing I found where a random reboot when being in the browser, but I will use it as my daily driver from now on
spitcuba said:
Nothing so far. Battery life also seems to be much better than in fj's one. The only thing I found where a random reboot when being in the browser, but I will use it as my daily driver from now on
Click to expand...
Click to collapse
Are you kidding!!!!!
I have to try it right now!!!!
BTW on which cm9 rom is this base lwxddlqkillapp??????
Can you post a link to the rom thread??????
Hi ben you will need bootfix for your xy720.
Sent from my SGH-T759 using xda premium
mchlbenner said:
Hi ben you will need bootfix for your xy720.
Sent from my SGH-T759 using xda premium
Click to expand...
Click to collapse
Thanks i use it but i m stuck at M logo.......
But my rsd flash don t want to flash so i flash it directly over my old cronos x rom... I will have to try to flash it again at home my work computer often don t want to flash... I don t know why...
Which sbf do you use spitcuba?????
b_e_n said:
thanks i use it but i m stuck at m logo.......
But my rsd flash don t want to flash so i flash it directly over my old cronos x rom... I will have to try to flash it again at home my work computer often don t want to flash... I don t know why...
Which sbf do you use spitcuba?????
Click to expand...
Click to collapse
str_u2_01.1e.0
I can overclock as f.y's rom. Can anyone giv me a bootfix
spitcuba said:
str_u2_01.1e.0
Click to expand...
Click to collapse
It works with STR_U2_04.1E.1 too (i successfully flash it in the end...) I think it will work with all the stock sbf.
If someone can try with the mod one (i have less than 2Mo free in the system rom...)
And i use the first bootfix for motoroi rom (and i clear all before and after the flash)
I had to reinstall gapps cause it can t sync my contact with out it (it only sync gmail and drive)
I had a little chinese everywhere in the beginning but after 2reboot all were gone. The only thing is that the OK is on the right and the cancel is on the left (not a big deal but it surprise at the beginning...)
App2ext works fine; the playstore too; and youtube too
I can t take pics with the camera (it launch it but don t answer after) edit: i try again and it take a picture but fc just after...
edit2:after a few uninstall (dspmanager; gtalk...) i sucess to take a picture in 8Mo (it was long....) and i film in 720p but i can t open it (and when i take the film it was very slow about 1image/s...)
I don t try a lot for the moment but it seems to be a really good one!!!
I think i will try it for the week end...
Thanks a lot lwxddlqkillapp
Hmm... wonder if it supports ext4? trying it now with modsbf...
***Edit*** Guess I used the wrong bootfix...
Nevermind figured it out I think
LibertyMonger said:
Hmm... wonder if it supports ext4? trying it now with modsbf...
***Edit*** Guess I used the wrong bootfix...
Nevermind figured it out I think
Click to expand...
Click to collapse
I don t know i m using ext3 too many issues with ext4 and not a big difference...
B_e_n said:
I don t know i m using ext3 too many issues with ext4 and not a big difference...
Click to expand...
Click to collapse
What issues do you have with ext4? I'm not aware of any maybe that will explain some issues I have had since i always run ext4...
Can someone please link me to the right bootfix?
LibertyMonger said:
Can someone please link me to the right bootfix?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1284017
is that it? Works for me...
Sent from my tf9001 with XDA XD.

Categories

Resources