Hey gang,
I got a spare battery and external charger to take with me when I am traveling.
my question is...has anyone broken the battery cover or the 'locking' tabs while removing the door? I am trying to figure out how careful I should be, or should I try to limit the number of times that I open/close the casing?
thanx
mine had the camera lens cover knocked out & split in half a long time ago (the seam between texture & gloss plastic). just ask HTC for a new one on their website. theyll send a new one.
Mine was fine coming on and off. I did break a tab however when I dropped my phone.... but who's fault is that?
Related
The small sliver of rubber that is stuck horizontally towards the bottom of the back of my Vario has fallen off.
I bought the device in the UK but am now out of there and the devices sold locally to me don't have this piece. Does anyone have details of a 'spares' company that could sell me this ridiculous 'part'? The stamp for the envelope will definitely be worth more than the piece of rubber but it's so handy and I want it back!
well, i would try calling the factory in taiwan, hah! (or making your own piece of rubber)
Yeah...mine fell of too...but I don't miss it at all, maybe that I will make my own peace of rubber sometime, but for now it does not bother me a single bit
if you live in atlanta i can give you mines i doubt anyone sells that piece, just buy the battery cover.
mine fell off too but I didn't really care. just get a black marker and color that part of the battery cover where the rubber used to be. it will look brand new again! lol
Egrips. check em out
Replacement battery covers cost $7 from HTC. Google them or search this site for contact numbers.
I'm just gonna search for a little piece of rubber and cut it to the correct size.
Then I'm gonna glue it to the battery cover of my Wizard. Only then I am sure it will never fall of again
Molski
I have a broken battery cover with the rubber part still on it. PM me your address and I'll post it to you.
First come first served.
Steve.
Is it normal for the battery cover to be "snapped in" perfectly on one side and on the other side it isn't as flush and sticks out. I just exchanged my first evo today because of screen issues and my brand new one's battery cover doesn't seem to fit perfectly. I also had this same exact issue with my first evo, so i'm assuming its a "normal defect"?
Doubt it if that's normal but mine also is the same way. When I first got it it was flush the when i had to remove the battery a couple of times it didn't go back onto it flush. The back bends pretty easy too.
Maybe you got a refurbish one the second time and they just said it was new.
mine does the same as well as 3 other evos that i know of
Out of the 3 Evo's I've had. 1 had perfect battery cover, 1 had **** (whole side raised up), 1 had bad (one corner raised up).
I'm 100% surethat my evo is not a refurb...
it's a pretty common problem. there's a thread somewhere here whey they suggest using a folded post-it note to fix the problem. it helps the back keep it's shape.
mine actually got to the point that if it got too warm the back would warp and start popping off!
starplaya93 said:
Is it normal for the battery cover to be "snapped in" perfectly on one side and on the other side it isn't as flush and sticks out. I just exchanged my first evo today because of screen issues and my brand new one's battery cover doesn't seem to fit perfectly. I also had this same exact issue with my first evo, so i'm assuming its a "normal defect"?
Click to expand...
Click to collapse
It's not normal. I don't know when they are going to start making smartphones with detachable battery (without cover) like the old Motorola cell phones, or the camcorders. You just need to pull a clip or something and that's it. No fragile covers that may break if you snap them in a hurry. The EVO one looks particularily thin.
The same for the memory, I think some phones have an external slot already.
My new less than a month old EVO just took a crash into some water. I took the battery out immediately, of course, and have it sitting in some rice. The battery water damage indicator looks to have been activated (the stripes are no longer red/white, can see the red stripes but the entire sticker is now pink). I have looked for an indicator on the phone itself, but don't see one anywhere. Oddly enough, the battery really wasn't wet when I took it out, so it's possible that I was able to save too much water from getting into it by getting it out and drying it out quickly. Do I actually need to take the phone apart to see the indicator? If not, where would one be? Nothing obvious just by looking at the phone.
The problem I have is I plan on sending it back to LetsTalk, as I just don't really care for the phone. It's too big for my liking. One of those Try before you truly buy things.
From the teardown photos it looks like there is on on the main PCB near the USB connector.
http://www.ifixit.com/Teardown/HTC-Evo-4G-Teardown/2979/2
Just because the phone took a bath does not necessarily mean it's done for good.... last time one of my phones took the plunge I immediately removed backing and battery and threw it all in a Snap Ware container of rice. Over a 24 hour period all of the mostuire was pulled out and it worked just fine.
I have also been told that submerging a wet phone into rubbing alcohol (after separating the battery!) Pushed all of the water out and then alcohol evaporates off. I have not tried this but it makes sense
Good luck
sent from my HTC Evo 4G rooted with unrEvoked, running the latest CM7 nightly build.
If you have a vacuum sealer you can wrap your phone in paper towels and put it in a bag and vacuum seal it overnight. My dad dropped his phone in a bucket of water and quickly pulled the battery out. After he let it sit over night he put the battery back in and turned it on, it had water trapped under the screen so we sealed it and it even pulled out some dirt from the buttons.
Thanks everyone for the info so far! I guess the big question is, do the online resellers actually take the phone apart to check for water damage if someone is returning their phone within the 30 day period? I'm so mad at myself for allowing it to happen!
If the phone turns on this evening after 24 hours and shows no damage, Going to grab a new battery, and send the bad boy back to them in hopes that they don't actually remove the screws and all to check the inside indicator. There is no visible water damage indicator at all on the phone itself, so by the pictures posted in the ifixit, is under everything.
^^Hey i've been in your shoes before.^^ Not with the evo tho....but look at it like this if you can see the indicator turning pink so can they!!!! Once "they" = sprint see the indicator changed your warranty & eveything is void. I dont think they're gonna take it but hopefully for you they'll overlook it.
Good luck bro!!!
You may be able to buy a water sticker on ebay
I actually very recently dropped my Evo in some water though it was in an Ottorbox Commuter case. Pulled it out quickly, took off the case, pulled apart the phone. Let it sit overnight as was and then put it back together. Nothing wrong with it so far.
I cracked my screen pretty badly this weekend and am planning on ordering the replacement parts this week (debating the just glass or the new glass/LCD options). But I've noticed since then(last 2 days) the battery has drained pretty fast. Normally I get 2 days from a charge, today I pulled the phone off the cord at 8am and now at 3pm I got a pop-up saying <10%. The phone has only sat on the desk. No calls, no emails, no text, no web surfing.
Maybe the screen is getting mixed signals, being cracked and all.
Any ideas?
mattlikesbikes said:
I cracked my screen pretty badly this weekend and am planning on ordering the replacement parts this week (debating the just glass or the new glass/LCD options). But I've noticed since then(last 2 days) the battery has drained pretty fast. Normally I get 2 days from a charge, today I pulled the phone off the cord at 8am and now at 3pm I got a pop-up saying <10%. The phone has only sat on the desk. No calls, no emails, no text, no web surfing.
Maybe the screen is getting mixed signals, being cracked and all.
Any ideas?
Click to expand...
Click to collapse
I am not really knowledgable about the exact interworkings of the HD2's internal hardware. But I do think it would be a pretty fair assumption that the cracked screen could be the cause of the sudden battery drain. You know your HD2 better than anybody else would as far as daily functionality of your HD2. So if it was not having a battery drain before you cracked the screen. And now you do after and this is the singular change in the state of the HD2 be it hardware wise or software wise. Then logic would say that is it.
Have you thought any about it might not just be the screen that is cracked. What about the internals. How hard did it hit, and how hard was the object the phone hit????
One last thing, be nice to your HD2, it is nice to you. ha ha ha....... But really take it easy on the hardware.
I trimmed the tape on it down to only covering the glass (finger protection mostly) and got it off the edges and out from around the back. This seemed to really help. I've noticed from the beginning of owning this phone that there are some sensitive spots on the sides that when pressure is applied the phone acts like a button was pressed etc. So I must have been causing this. Even with the screen off it was still reading a button push and having to process this action, using power.
I need to find a hard shell for the phone. The rubber thing that came with it is useless as it sticks in your pocket, I need smooth hard plastic I guess. The phone slipped out of my hand as I was getting out of the car and landed face down. Pure accident.
mattlikesbikes said:
I trimmed the tape on it down to only covering the glass (finger protection mostly) and got it off the edges and out from around the back. This seemed to really help. I've noticed from the beginning of owning this phone that there are some sensitive spots on the sides that when pressure is applied the phone acts like a button was pressed etc. So I must have been causing this. Even with the screen off it was still reading a button push and having to process this action, using power.
I need to find a hard shell for the phone. The rubber thing that came with it is useless as it sticks in your pocket, I need smooth hard plastic I guess. The phone slipped out of my hand as I was getting out of the car and landed face down. Pure accident.
Click to expand...
Click to collapse
I too have notice the same thing about my HD2 that ertain areas around the edge are sensative, like you said almost like you were pressing abutton of some sort. I am glad you figured something out that helps stop the battery drain. I know that can be agrevating as hell.
If you have a T-Mobile HD2 like I do you could try the Body Glove. I have one on mine, it is a two piece hard plastic cover you HD2 slides up in. ig has a pull out kickstand on the back also, I really like it. It has help protect my HD2 several times when I accidently dropped it out of my hand. I do warn you though after having it on your HD2 for awhile it will make to little scuff marks of the clear coat on your battery cover. Also I have notice I have to make sure I have a ferm grip on it when I pick it up cause the plastic cover is a little slick not like when gou have the rubber case on it. I attached two photos of the cover, oh and you can buy it from T-mobile store or from the T-Mobile website. I suggest website it is cheaper there.
Hi guys, I've owned an Xperia Play since July 2011, since then I've had some 'Battery Cover' issues. First, let's start off by talking about the battery cover itself, well actually there's not much to say. If you have an Xperia Play you already know the battery cover is very cheap, it's a large rectangular piece of plastic that covers the entire back on the phone, it's a pain to get it off and on at times. So not only it is cheaply made, it also has the tendency to start 'squeaking' or 'creaking' after a while. This simple issue can be fixed my ordering a new back piece to replace the old one, but note, if you swap batteries, swap SIM cards, swap SD cards, or anything that involves taking the battery cover off, it WILL, at some point in time, get worn out and slightly bent out of place. There's no escaping this problem due to it's design. In the past I've ordered about 3 Black battery cover replacements, and each one of them, after sometime, became creaky. Now maybe I'm just being picky but I REALLY hate picking up my phone and hearing that *squeaky* sound. It annoys the piss out of me. So I've came up with a way to prevent / fix this. What I'm about to guide you through is EXTREMELY simple and shouldn't cost you more than $2... ENJOY
SUPPLIES: Electrical Tape & Scissors
(1) Hold your phone to where the back is facing you, gently but firmly press all around until you've found your squeaky area. ( take a mental note of where this spot is )
(2) Remove the battery cover.
(3) Cut off a piece or two of electrical tape according to the size of the squeaky area, place the electrical tape on the inside of the battery cover where you took a mental note of.
(4) Put the battery cover back on! You're all done! No more squeaking!
It worked for me, it should definitely work for you! Try it out and post your results! Don't forget to *Thank* me!
(I've included a picture of what the results look like, lol I'm sure we all know what a piece of tape looks like on a piece of plastic but yeah here's one in case you don't!)
Thanks, no more squeaking!
I dont care about the squeaking that much, but still, u made my play better!
CyberScopes said:
Thanks, no more squeaking!
I dont care about the squeaking that much, but still, u made my play better!
Click to expand...
Click to collapse
Glad I could help! Sure beats spending $10-15 for a new back.
Yep. I used strong masking tape.
Sent From My Sony Xperia Play. Press the Thanks button for Fun.
I've replaced the battery lid a few times but I've never had the creaking problem. I wonder if it has something to do with the CDMA version not having the space for the SIM card.
Anyway, I do agree that they are poorly made. My first one developed cracks around the pry point and around the top even before I got a second battery. Obviously, battery swapping means I open it more often than most users, but I was EXTREMELY careful. Eventually I lost the corner next to the power button. On my replacement I made sure to never use the pry point without relieving pressure by pulling the corners too (usually unclipping them first). I also used a stick-on carbon-fiber protector from the day I installed it till the day I replaced it. It eventually formed a crack by the pry point too. Argh!