HI all, my hd2 has a strange problem
Whenever I am in a phone conversation, and a third party dial in, there is no notification other than a beep (which is barely heard when you are in a phone call). Is this normal for your HD2?
Can you make the phone vibrate when there is a third party incoming call??
and another question related to call waiting. if i am calling smbd and that somebody is engaged in a conversation with a third person, i don;t hear in my phone any sound that would inform me that i am on hold and the person might think: WTF, is he stupid or what. any ideas?
with the forst i don't know... with the second i think it is network dependent...
and i have another one... what about when you have a number directed to yours to have a sign or somthg when the incoming call is from that number...
what i was talking about of course it's network depending, but u see, with the same SIM in a samsung or a nokia i can see the notification that i am calling when the line is occupied, with my HD2, and generally, with any other WinMo device, u cannot see it. it was discussed a lot, but i thought may be smbd have a solution already.
Related
Dear all,
Is it possible to configure my XDA Exec such that the persons ringing me can hear my MP3 ringtone as well ?
Thanks
ringtone
ummm, i don't think that is possible, but here, tmobile US has this thing called caller tunes, where you set your account to play a song instead of the pulsing ringing sound when someone is calling you.
In israel we have the same thing,
In israel we have the same thing,
HOWEVER - technically you could do it:
its like a fax machine when it picks up and hears its not a fax call:
it answers, and other side hears a "still no answer" tone and the fax still rings.
you have to write a program that answers the second the call is recieved, starts an mp3 program with a file, and your phone is on mute,
and upon pressing "send" key un-mutes your phone and stops the music.
just dont forget to tell program to hangup after a minute or so
BUT - you have to check when you are on the phone with some 1 and you play an mp3 on WMP or other player - if the other side hears the music while he's muted.
would be a really good idea !
If all you want to do is let them hear it while talking to them, you could get them on the phone and go into phone settings and click play next to the ringtone. They would hear it by proxy so to speak.
Cya
Stot
You could always learn how to duplicate noises using your mouth. You know, like that dude off Police Academy.
HTH
I had something like that on my old Sony J5 mobile phone from a few years ago, an answerphone built into it onto which you could record any answerphone message you wanted.
It is possible. Had a girlfriend once whose phone did that. T-mobile UK and a one-off fee. Cant remember how much though.
I had it also, was totally crap as I had one hell of a lot of missed calls, people would call, it would start ringing, they'd go "What the f....." and hang up!!
It was useful, you could hear them but they could only hear the soundeffect/answerphone phone message, not the microphone, so you could interrupt it if you wanted to talk to them and if not they believed it was just an answerphone.
MP3 caller tune
Dear all, Thank you all for your comments and suggestions, etc.
What I mean is something just mentioned in this post, called caller tune.
Basically, what I want is: the caller can hear MP3 from my phone instead of that boring "pulsed ringing" before I answer the call.
i dont think that will be possible, surlly thats the phone companies ownership
Of course its possible - answer the phone the second it rings, and hold it near your stereo ;o)
The HTC's "Missed Call" concept is amazing and very _annoying_ to me.
Tell me if I'm the only one or there are others who feel like me.
Here's the problem:
Generally speaking, when someone calls you, you have three options (irrespective of the phone you use):
1. Accept (answer the call)
2. Reject (cancel immediately the incoming call)
3. Ignore (let the phone ring until the caller or the carrier quits the incoming call)
Now, when I get called on my TD2, I have 2 options: "Answer" and "Ignore".
In fact HTC's "Ignore" is functioning as what normally is called "Reject".
But, Ignoring and Rejecting are two different things.
If I Reject, it means I don't want to take the call and the caller understands that right away.
If I Ignore, for the caller it means either I don't want to take the call or I cannot answer for various reasons.
But HTC has messed up these concepts.
The problem is that if I intentionally reject a call (Ignore according to HTC) that call is still reported as a Missed Call (plus the green flash).
Now, I've never seen on a mobile phone a rejected call to be registered as a missed call.
I don't pretend I've used all mobile phones in the world, but I have never encountered this concept.
... and it's annoying.
I want to be informed about the calls I "MISSED" not the calls I've deliberately rejected.
Am I the only one annoyed by this?
are you reffering to the slide options (left / right) or to the button below the slider?
PseudoReal said:
are you reffering to the slide options (left / right) or to the button below the slider?
Click to expand...
Click to collapse
Yes. When you get a call you either slide to "Answer" or "Ignore".
However, "Ignore" is really rejecting a call.
.................
@Bothkill
I am bothered by this too. I always thought when I was ignoring a call the ringtone was going to silent but the caller was still ringing a bit like on Nokia's.
Exactly, this "concept" of ignore/reject it's also annoys me! Not mention the missed call when you reject the call ! This is weird also for me !
Correct me if I'm wrong since I do not have the phone, but can't you silence a ring by turning the phone over (face down) in essence, ignoring the call?
Another neat trick is something that the accelerometer makes the phone NOT do; the simple act of flipping the Diamond over on its face puts it immediately into silent mode. No more embarrassing rings during meetings.
Click to expand...
Click to collapse
from here: http://www.laptopmag.com/review/cell-phones/htc-touch-diamond.aspx
I realize this is a link to the original touch diamond but I thought the feature was still in tact on on both the Pro2 and Diamond2
Correct me if I'm wrong since I do not have the phone, but can't you silence a ring by turning the phone over (face down) in essence, ignoring the call?
Click to expand...
Click to collapse
Yes, you can, it works.
the simple act of flipping the Diamond over on its face puts it immediately into silent mode
Click to expand...
Click to collapse
It works too
Also here, very annoying.
Not speaking for muting the sound, but rejecting call and it's going as missed call.
It's stupid.
When you get call in TD2 you will have slide for "Answer" and "Ignore" and another button for "Mute Ring".
Any mobile will have 3 types of call in the register: Incomming, Outgoing and Missed.
Incomming Calls: 2 Types:
a) Received
b) Missed
So you can "answer" the call using "Answer" slide: This will register in "Incomming" calls.
"Reject" the call using "Ignore" slide: This will register in "Missed" call.
Why??? You might have rejected the call for many reasons or you may want to know the calls that you have rejected, so Missed calles. This is EQUAL to the actual MISSED Calls, where you did not see your phone when the call came in.
And "Mute the Ringtone" using "Mute Ring" button. This will register the call based on your response with slide button as above. May be Received or Missed
And Finally you have "Outgoing Calls".
So can you specify if the calls that you reject does not get register under "Missed" where it should go?
For me the Call register of HTC TD2 using WM is perfect
prabhat said:
For me the Call register of HTC TD2 using WM is perfect
Click to expand...
Click to collapse
Did your previous phone(s) worked like that (i.e. registering Rejected calls as missed)?
Bothkill said:
Did your previous phone(s) worked like that (i.e. registering Rejected calls as missed)?
Click to expand...
Click to collapse
Where it should go? or where does it goes in your previous phone(s)?
As far as I know, all the WM phones (standard & professional) act this way. Rejecting a call (or ignore in HTC) as well as pressing the hang up hardware button will rejister the call as a missed call (with the corresponding led notification).
As for regular phones, my older SonyEricsson phones used to behave in the same way. But Nokia phones actually treat rejected calls as recieved calls & not as missed calls.
Each type of behavior has its own benifits & disadvantages. But it would be nice if we could choose which behavior the phone does since WM phones are highly customizable.
omar302 said:
But it would be nice if we could choose which behavior the phone does since WM phones are highly customizable.
Click to expand...
Click to collapse
This will be really great some senior registry guy should reply this with the related change
Missed calls are calls missed!
Prabat is correct, it does make sense....
if you rejected a call or ignores it, it means you missed that call coz you did not answere it, make sense right?
whatever your reasons are for not taking the call or by rejecting it, STILL you didnt took the call so simply means you missed it.
unanswered calls either by ignoring or rejecting SHOULD be listed under MISSED calls and thats common sense....
Suppose I have to take the train to get somewhere.
If I tell you I have missed the train what do you make of it?
That I failed to reach it in time or can it also mean that I was there just one meter from the train but I refused to get on it?
MISSED means I was not there, couldn't make it on time etc.
Common sense tells me that a missed call is a call I missed to acknowledge (i.e. missed to take any decision about it: answer or reject).
P.S.
Thinking more about it, I understand that you mistake "call" for "conversation" and HTC does the same.
What you describe is a missed conversation.
But call and conversation are two different things.
When somebody calls you (and I'm not referring only to telephony) if you answer the call, the conversation starts.
But when I don't hear when somebody calls me, then I missed that call, (i.e. I have a missed call).
As a phone user I am interested of being notified about the calls made to me and which I was not aware about.
To better describe the difference between call and conversation:
Somebody calls me.
I answer (I accepted the call).
I immediately cut off the phone connection (no conversation occurs) --> I have a missed conversation since I didn't talk with the other person.
The end result: no missed calls, one missed conversation.
The HTC Diamond 2 doesn't notify me of any missed "things" because I didn't miss any calls (and I agree with it). But I have missed a conversation and my phone doesn't know that.
The phone's job is to notify me about missed calls, and not about missed conversations.
Imagine the following dialogue:
Wife: Hey dear, why didn't you answer my first call?
Husband (drunk): Oh.. no.. dear... I missed it..!
Wife: You liar!
Husband (drunk): Oh.. no.. I can prove it. Look my led is flashing, it means it could be your missed call, let me check..
Wife: Oh no you bastard, you rejected it on purpose, but you're using that weird HTC "Missed Call" concept in order to look innocent. You've drinking with the boys again, haven't you ?!!!
at least thumbs up for the very fanciful story
Even I feel that the "Rejected" calls should go into "received calls" list.
I thought that my phone had a software problem. Now I know.
But, even if the call goes in the "missed calls" list, maybe it can give a notification that the call was deliberately "Rejected"...
Any help would be greatly appreciated since this problem is bugging me.
Thanks.
when i am on the phone with someone and another person is calling me i can anwer this call - unfortunately on htc I only hear nothing.
does manila/winmo/htc supports call waiting/conf calls and features like that?
I'm not sure what your issue is, but here are some details:
You can activate call waiting, if your operator supports it. here is how it works: you are on the phone with person A, person B is calling. While person B is calling, you'll hear short beeps (always in a row of two beeps) thus letting you know there is some 'activity' going on.
You can answer the second call and put the first on hold. In the meantime, person A will hear a sound similar to the 'beeeep-beeeeep-beeeeep' calling sound.
When you decide you want to make a conference, you simply click Menu -> Conference, and now you have both calls connected.
In case you have several calls on hold, you can select which calls you want to make the conference with.
Hello
When calling another person from my phone and if there are on the phone you will get call waiting as this way you now the person it on the phone.
I have tired it from another phone and it works but when i try it on htc hd2 it doesn't come up saying call waiting. Where as the person it on a call.
It was a very useful thing to have on phone. Is there a reg key i can change or cab file??
I think that if you are dialing, you do not have call waiting. This is also true for fixed lines. This is the only time your caller can get a busy tone.
But home phone nowadays operate like cell phones, and do not really send out the DTMF until you press the talk button. As a result, the dialing process beomes so quick that it does not matter much.
Alex
For example
If I am dialling your number and while you are already on another call with someone else than it will come up on my phone call waiting.
This way I now you are on the phone.
It use to work from my nokia phone but I am not sure if that option is available in winmo
I get a lot of calls, often getting calls when already on a call.
I had a TYTN II before, and it had a function that allowed me to hang up current call and answer new call.
I don't think the HD2 allows that? Only gives me option to answer new call, which leaves other call running. I end up having to ignore new call, hang up current call and call the other person back (at my cost).
I spend about 24hrs a month on the phone, so the more i can answer calls when the come in, the cheaper it is for me.
Any one know a solution.
Also side issue. I used to get appointment reminders. And if i had the persons phone number in the appointment, i could dial it from the reminder. Was great if i was running late. it seems to have disapeared, probably with an update. anyone know how to reactivate it?
anyone got any ideas?
ok still waiting for help on this.