HTC Touch 2 (T3333) CID-Unlock - Touch2 General

Dears,
Any one can help me to find a way or a tool to get rid of CID lock,
I can't flash my old ROM to a new one, So please any help or hint?
Thanks in advance

You mean not SIM, but ROM unlock right? If so in ROM section there is a HSPL procedure which will do the trick

Thanks
Thanks mirost1 for your fast response,
Yes it's ROM problem, because when i want to update my old ROM with a new one from the official site of HTC I got this message on my phone when I did the flashing procedure:
Error [294]: invalid vendor ID,
This update utility cannot be used for your PDA phone please check your update utility
So you think that the HSPL is the only way to get out from this trouble.
Best regards.

Yes, its the only way. When HTC give their phones to service providers, they modify the ROM and lock it, thats why you cant put official HTC rom on this device. When you HSPL the phone you can put whatever ROM you want on it.

Hi
Thanks for your useful information and help

No probs mate

Related

need any HTCP3300

tried to install the mobiz rom and the boot screen is now on allways!!!
can some one provide me a link to an HTC P3300 ROM so i could try to refalsh it from bootloader mode?!
thanks!!!
please anyone?
any HTC rom just to have an operating system working. then i will open the CID lock and go to a better one.
please help!!
check wm-gurus.com - this site has ROMs for HTC devices.
Have you read the wiki first? I believe your device must be CID unlocked first.
thanks.
found one.

[Error 300] INVALID UPDATE TOOL!!! Is there any fix

Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
nauman said:
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
Click to expand...
Click to collapse
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
farukb said:
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
Click to expand...
Click to collapse
I have the original ship ROM "P800w_SEA_ENG_WM6_Upgrade_20070713", even that fails with the same error message.
My device is already unlocked using the artemis uspl and I have used several ROMs earlier!!!!
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
corepda said:
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
Click to expand...
Click to collapse
I sent my device to HTC service center and go it resolved. That is the only thing which worked for me after a couple of weeks searching in the forums and no solution. But the HTC SC buggers replaced my device entirely and gave me back an old **** device . So also keep this in mind. you won't be sure, if you get your original device back after the so called repair. HTC SC in India is super *****y, had a bitter experience!
Now I have moved to TD2, know that I was at loss, but am happy to have a shiny new TD2
Service Centre at Mumbai Sucks Big Tym....
HTC service centre at mumbai sucks big time....
they said they can't replair my cell n it has a HARDWARE ISSUE!!!
stupid lasses....
What can we do here getting the same error....
Tried MMC method, nothing!
HOW CAN THERE BE NO SOLUTION TO THIS PROBLEM??????????
no have solution this problem ???
stupid ! CID area !!! STUPID HTC ---

Upgrading the Wm6 to Wm6.1

i had HTC p3300 (atremis).
kindly help me to upgrade my mobile to WM6.0 to Wm6.1 (with latest ROM)
Current Specification
ROM version : 3.7.707.1 WWE
ROM Date : 21/06/2007
Radio Version : 02.69.90
Protocol verison : 4.1.13.30
EXtROM verison : 3.6.707.101
What dou you need?
Have you searched something?
Have you open the first posts on Artemis upgrading seccion?
I would suggest that before u upgrade ur phone read this thread properly to understand the procedures and risks involved in flashing a ROM http://wiki.xda-developers.com/index...me=HTC_Artemis
1. In order to flash a ROM on ur HTC P3300 u 1st need to CID Unlock your device, that way u'll be able to flash a ROM on to ur phone REMEMBER to CID Unlock your device before doing anything otherwise u'll brick your phone. You can get the CID Unlocking software frm here http://forum.xda-developers.com/showthread.php?t=311403.
2. After you are done wid the 1st step u've now CID Unlocked your device and it is ready for a ROM upgrade. Select and download a ROM of you choice frm here http://wiki.xda-developers.com/index...mis_DumpedRoms (I personally prefer the Black and Blue ROM http://forum.xda-developers.com/showthread.php?t=364883) flash the ROM on to your device and after the reboot u'll have WM6.1 .
3. Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities. You can find the latest Radio ROMs here http://wiki.xda-developers.com/index..._RadioUpgrades.
But please do read the thread i mentioned in the beginning.
Thank u for the reply...
i saw the first posts on Artemis upgrading section...
Its tells about the USPL and related to the upgradtion...
i have one more clarification regarding this..
did the Artemis_USPL pakage contains the ROM or not ?
No. The USPL does not contain the Rom for P3300
peppercon said:
I would suggest that before u upgrade ur phone read this thread properly to understand the procedures and risks involved in flashing a ROM http://wiki.xda-developers.com/index...me=HTC_Artemis
1. In order to flash a ROM on ur HTC P3300 u 1st need to CID Unlock your device, that way u'll be able to flash a ROM on to ur phone REMEMBER to CID Unlock your device before doing anything otherwise u'll brick your phone. You can get the CID Unlocking software frm here http://forum.xda-developers.com/showthread.php?t=311403.
2. After you are done wid the 1st step u've now CID Unlocked your device and it is ready for a ROM upgrade. Select and download a ROM of you choice frm here http://wiki.xda-developers.com/index...mis_DumpedRoms (I personally prefer the Black and Blue ROM http://forum.xda-developers.com/showthread.php?t=364883) flash the ROM on to your device and after the reboot u'll have WM6.1 .
3. Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities. You can find the latest Radio ROMs here http://wiki.xda-developers.com/index..._RadioUpgrades.
But please do read the thread i mentioned in the beginning.
Click to expand...
Click to collapse
thank u for the guidelines
i ran the USPl and I followed the guidelines.
after CID ublocking , it went for ROM Update utility.
i clicked next and processed.
finally i Device get rebooted. but ROM was not get Updated.
still it is in WM6.0
pertaining to point no 2 the rom which is specified by you is it compatible for HTC artemis
I also searched in Artemis _dumped roms.
ididn't understand the Operator . kindly help me about the selection of ROM for my Device.
thanks in advance
When your device boots, what number appears after "SPL" ?
Zecanilis said:
When your device boots, what number appears after "SPL" ?
Click to expand...
Click to collapse
spl-1.11.0000
ok tht shows, tht u have CID Unlocked your phone...and as i mentioned tht u need to select a ROM of ur choice frm the thread i gave u...just click on the thread link in tht page and tht will lead u to the ROM's page, der u'll c screenshots of the ROM and the OS version which wud be either WM6.0 or WM6.1.
Just download the ROM i suggested (Black and Blue v5.0) and download the cube version after downloading it unpack the file and u'll c ROM Uploader/Updater (something like tht) just double-click it and follow the wizard..thts it
yes tht ROM (Black&Blue v5.0) shall be compatible wid ur Atemis
peppercon said:
yes tht ROM (Black&Blue v5.0) shall be compatible wid ur Atemis
Click to expand...
Click to collapse
I installed it too. Ya it is compatible with our Artemis
Fianlly its done..
thank u very much for great support
looking forward the same in future also...
You're welcome!
Hey thx for the posts..
I had a question though - I thought we were talking about Artemis - IOn the screenshots of black & Blue, I saw the processor speed @ 400 MHz - & mine is 200 MHZ ... How much difference will that make ?
win5 to 6.1/6.5?
sir referring to my title..can i upgrade to those higher platform? i have my artemis for almost last year and just know i learn about this..and how can i know is my device is CID locked or SIM locked?
peppercon said:
I would suggest that before u upgrade ur phone read this thread properly to understand the procedures and risks involved in flashing a ROM http://wiki.xda-developers.com/index...me=HTC_Artemis
1. In order to flash a ROM on ur HTC P3300 u 1st need to CID Unlock your device, that way u'll be able to flash a ROM on to ur phone REMEMBER to CID Unlock your device before doing anything otherwise u'll brick your phone. You can get the CID Unlocking software frm here http://forum.xda-developers.com/showthread.php?t=311403.
2. After you are done wid the 1st step u've now CID Unlocked your device and it is ready for a ROM upgrade. Select and download a ROM of you choice frm here http://wiki.xda-developers.com/index...mis_DumpedRoms (I personally prefer the Black and Blue ROM http://forum.xda-developers.com/showthread.php?t=364883) flash the ROM on to your device and after the reboot u'll have WM6.1 .
3. Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities. You can find the latest Radio ROMs here http://wiki.xda-developers.com/index..._RadioUpgrades.
But please do read the thread i mentioned in the beginning.
Click to expand...
Click to collapse
hello,
I CID unlocked my artemis 1 year ago,do i need to do it again ? if i want to upgrade a different ROM? or is ones enough
@leventero
No you dont need to CID unlock your device again if u have done it earlier...just proceed with the ROM flashing
@Neo Collin.
I believe the Black and Blue ROM is compatible with Artemis, since I flashed the ROM once myself and worked perfectly well. Unless you are looking at Black and Blue ROM for another device carrying a higher processor or maybe the screenshots are from some device other than Artemis and posted there for just a reference!! ...please never try flashing a ROM for devices other than Artemis!!...I hope that helps
@lunakrib
Yes you can upgrade you Artemis from WM5.0 to WM6.x, however there are a few things you need to know before flashing. (Prior to flashing your device I strongly suggest that you go through with this thread to understand the complications and other issues that you might face during an upgrade http://wiki.xda-developers.com/index.php?pagename=HTC_Artemis)
1. Before upgrading your device check whether the device is SIM or CID locked or both in some cases. The best way to check whether your phone is SIM locked or not is to insert a different SIM Card (from another operator), if that SIM card works properly means your device is not SIM locked and if the phone doesn't accepts the new SIM Card then probably the phone is SIM locked. Here is how you can SIM unlock your phone http://forum.xda-developers.com/showthread.php?t=397718.
2. Coming to the second issue which is checking if the device is CID locked or not. Well the best way is to take a trip down to your memory lane and see if u have ever flashed a cooked ROM onto your Artemis (since you said that you are using WM5.0 on it, I reckon that your device is probably CID locked) if however you did flash a different ROM then you must have CID unlocked your device. But there is also a way that you can check whether the device is CID unlocked is when you turn on your phone, but it has been a while since I CID unlocked my device so i don't remember that, however here is the link where you can find the CID unlocking software and its procedure. http://forum.xda-developers.com/showthread.php?t=311403.
3. Lastly just follow the steps I listed in my earlier posts in the forum about how to flash a ROM on Artemis. Here is a really nice ROM that you can flash on your Artemis http://forum.xda-developers.com/showthread.php?t=542428...it's a WM6.5
I hope this shall be helpful!! and my apologies for the late reply to all.
peppercon said:
Yes you can upgrade you Artemis from WM5.0 to WM6.x, however there are a few things you need to know before flashing. (Prior to flashing your device I strongly suggest that you go through with this thread to understand the complications and other issues that you might face during an upgrade http://wiki.xda-developers.com/index.php?pagename=HTC_Artemis)
1. Before upgrading your device check whether the device is SIM or CID locked or both in some cases. The best way to check whether your phone is SIM locked or not is to insert a different SIM Card (from another operator), if that SIM card works properly means your device is not SIM locked and if the phone doesn't accepts the new SIM Card then probably the phone is SIM locked. Here is how you can SIM unlock your phone http://forum.xda-developers.com/showthread.php?t=397718.
2. Coming to the second issue which is checking if the device is CID locked or not. Well the best way is to take a trip down to your memory lane and see if u have ever flashed a cooked ROM onto your Artemis (since you said that you are using WM5.0 on it, I reckon that your device is probably CID locked) if however you did flash a different ROM then you must have CID unlocked your device. But there is also a way that you can check whether the device is CID unlocked is when you turn on your phone, but it has been a while since I CID unlocked my device so i don't remember that, however here is the link where you can find the CID unlocking software and its procedure. http://forum.xda-developers.com/showthread.php?t=311403.
3. Lastly just follow the steps I listed in my earlier posts in the forum about how to flash a ROM on Artemis. Here is a really nice ROM that you can flash on your Artemis http://forum.xda-developers.com/showthread.php?t=542428...it's a WM6.5
I hope this shall be helpful!! and my apologies for the late reply to all.
Click to expand...
Click to collapse
hello thanks for notifying us..
my phone is sim unlock im sure of that i have used it with many SIM but security unlock im not sure,,on #2 that USPL by pof, do we need to run tru uspl everytime we're going to flash a new cooked rom? or once u flashed the update SPL no need to flash it again
thank you

Problems with phone

I haven't used my Touch HD in a very long time and when I turn it on now (dont remember what happened) it says upgrade ROM code error please try again. Does HTC have an upgrade for it? I live in the US and their site doesn't show anything about the phone, used europe site but gave me a no updates for that serial number. I am guessing that a stock ROM from HTC would fix this problem as the phone is not unlocked.
Shipped roms can be found here. Hope this helps.
If you receive "Upgrade ROM code error" then you will need to flash original stock rom which was on your device, i.e. not any stock rom but the original one. Your original stock rom should flash whether it says 'usb' or 'serial' at bottom of bootloader.
Link to stock roms has been provided in post above
Thanks
Thanks a lot, I haven't used that phone for probably a year so I hope that fixes it. I cannot wait to use that phone again, since I paid good money for it.
Hallo.
I flashed the Energy.BLACKSTONE.29020.Sense2.5.GER.Cookie.2.0.Touch.Of.Glass.Jun.02.
Now the phone find no connect.
I use an HTC BLACKSTONE.
I hope you can help me.
Sorry for my bad english.
Best regards
Matthias
make007 said:
Hallo.
I flashed the Energy.BLACKSTONE.29020.Sense2.5.GER.Cookie.2.0.Touch.Of.Glass.Jun.02.
Now the phone find no connect.
I use an HTC BLACKSTONE.
I hope you can help me.
Sorry for my bad english.
Best regards
Matthias
Click to expand...
Click to collapse
Did you follow this guide and put either USPL or HSPL on your device first?
Before flashing anything, its always best to read the stickies (thread stuck at top of each forum which provide guides, references etc). My advice would be to read this

Rom upgrade for HD2 from o2 (UK) - won't let me!!!

Hi guys, anyone know the way to overcome this?
How to upgrade to a higher ROM?
Even HTC's website won't let me downloading the ROM saying that the upgrade aren't for this device!!!
Please!
p.s. sorry I'm new to winmo...
regards!
use a gold card in sd slot or just install HSPL first
wtf is a gold card? i keep seeing people refer to it but never what it is, i imagine its a sim card with a toffee penny wrapper stuck to it lol
http://forum.xda-developers.com/showthread.php?t=591314
Basicly its a sd card with its unique serial number run though some software but as its no longer free just use hspl if you dont have a goldcard.
Forget about the goldcard, you don't need one so long as you have a copy of the original rom available, which you do. Hunt it out in the official roms forum. First post, first link, 1.43 section, its listed there. Thats your backup, then instal hspl and you can flash what you like.
Your HD2 is locked to o2 (UK) ROMs only so you cant put any of the official HTC ROMs or any of the custom ROMs from the "HD2 ROM Delvelopment" forum
http://forum.xda-developers.com/forumdisplay.php?f=534
because of this your always be running out of date software as the phone operators are always so slow at releasing updates if they do at all.
BUT if you download HSPL from the above forum thread "[HSPL] HowTo flash everything"
http://forum.xda-developers.com/showthread.php?t=611433
and install it to your phone your then be able to put on any ROM you like. Don't worry its near impossible to muck anything up and you can always put the phone back to its original rom, just do a little reading if your still not sure.
Great Guys! HSPL helped!!! I've upgraded...shame I can't manage to download Rom 1.66 as it always crashes and the download in general is sooo slow (not the internet issue)...but maybe with a bit of patience I'll get it at the end!
Cheers once again!!!
essensial said:
Hi guys, anyone know the way to overcome this?
How to upgrade to a higher ROM?
Even HTC's website won't let me downloading the ROM saying that the upgrade aren't for this device!!!
Please!
p.s. sorry I'm new to winmo...
regards!
Click to expand...
Click to collapse
HTC have now listed a new ROM upgrade (1.72.206.3 released 27/04/10) for the HD2 on their UK support website (htc.com/uk)
Let me know how you get on with it as when I enter my o2 serial number I still get the error message you mentioned. I have sent a message to HTC support...just waiting for a reply.
shutty2k3 said:
HTC have now listed a new ROM upgrade (1.72.206.3 released 27/04/10) for the HD2 on their UK support website (htc.com/uk)
Let me know how you get on with it as when I enter my o2 serial number I still get the error message you mentioned. I have sent a message to HTC support...just waiting for a reply.
Click to expand...
Click to collapse
all you o2 guys that cant down load have been able to get 1.66 from htc's site for months now this rom is purley for the forgoton few (like me) who got the phone as o2 launched and locked down (no wifi router etc) I ran this rom for a day and it nice and snappy fast but its still not wm 6.5.3 so i am back on touch-x again now the 2.07 radio in the o2 rom was quite ok in my area when I used it a few months ago but the 2.10 in my opionion is a match for recption with better battery life just my 2 cents hope it may help some of you
What about Virgin Mobile? Will they get a Rom Upgrqade???? they seems to have been left out of the loop even though they were the first (technically second) carrier of the phone.

Categories

Resources