Database Users

Update PRL

ive searched, and haven't found any instructions.
i have the 60663.prl file i just dont know how to use it.
i have my msl.
help please?

put the prl file on the sd card, go into the phone and dial ##PRL# (also known as ##775#), it will say "please wait while initiating", then it will go to another screen to ask for your password (thats where you enter your MSL). Next screen will say "Update PRL", click on that. put in the name of the prl file (60663.prl) then hit OK.
That should do it as far as I know.

##PRL# or ##775# and then enter your msl. make sure the prl is on your sdcard

thats exactly what i did.
but its been at the "please wait while commiting change..."
for a good fifteen minutes.

Nand backup. I hope you have a backup of the 1.5 stock rom, run the prl update, then restore your current backup

i figured it out, thanks for the somewhat help.

What did you do?
Mine is stuck at "Please wait while committing change" also.

lte:esm - 29 emm - x unable to establish a wireless data connection

hey, i unlocked the phone to use in gsm networks (im outside the us) but 3g is not working, it says lte:esm - 29 emm - x unable to stablish a wireless data connection i get signal and i can make calls, but no 3g.
i set the gsm/umts mode but i still get this message when i try to use my data connection.

rodmc123 said:
hey, i unlocked the phone to use in gsm networks (im outside the us) but 3g is not working, it says lte:esm - 29 emm - x unable to stablish a wireless data connection i get signal and i can make calls, but no 3g.
i set the gsm/umts mode but i still get this message when i try to use my data connection.
Click to expand...
Click to collapse
I had the exact same problem. After unlocking I updated to MJA. This solved the problem because in MJA you can add/edit the APN settings.

tronac said:
I had the exact same problem. After unlocking I updated to MJA. This solved the problem because in MJA you can add/edit the APN settings.
Click to expand...
Click to collapse
but i can edit apn settings right now on mdc also lol.. atleast the menu let me do that.. but i still get the error .. ill try updating to mja,
did you have the same message error? "lte:esm - 29 emm - x unable to stablish a wireless data connection"
can you tell me how you did it? just downloaded MJA modem and flashed it? is there something extra i should know?

rodmc123 said:
but i can edit apn settings right now on mdc also lol.. atleast the menu let me do that.. but i still get the error .. ill try updating to mja,
Click to expand...
Click to collapse
Know you cannot go back to 4.2 ever
Sent from my SPH-L720 using Tapatalk

daniel4653 said:
Know you cannot go back to 4.2 ever
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
my phone was already in stock 4.3 when i got it.. so i downgraded the moden to mdc through odin to unlock it, but 3g is not working, if upgrading to mja again works i dont care. i just wanna know im not going to brick the phone with this.

rodmc123 said:
my phone was already in stock 4.3 when i got it.. so i downgraded the moden to mdc through odin to unlock it, but 3g is not working, if upgrading to mja again works i dont care. i just wanna know im not going to brick the phone with this.
Click to expand...
Click to collapse
Oh you meant MDC as modem only lol.
Sent from my SPH-L720 using Tapatalk

daniel4653 said:
Oh you meant MDC as modem only lol.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
damn.. i upgraded to MJA modem and i still get this message "LTE: ESM - 29 EMM - X unable to establish a wireless data connection"

anyone knows this error? i need help!!

rodmc123 said:
anyone knows this error? i need help!!
Click to expand...
Click to collapse
When you click settings>more>about device>status what does it say? Does it mention what type of network? Edge, HSPA?
You must make sure that in the Network selection you selected GSM/UMTS.

tronac said:
When you click settings>more>about device>status what does it say? Does it mention what type of network? Edge, HSPA?
Click to expand...
Click to collapse
in mobile network it says 'UMTS' i was able to make "wcdma only" work (i had to reset the network settings with ##72786# and make the unlock process again) but when is going to connect to 3g it gives me the "LTE esm 29 cannot establish wireless connection" error..also after the reset there is a green circle telling me to activate the phone in sprint (this was a phone with bad esn if im not wrong)..
i used hiapn and all that stuff, upgraded modem to MJA and nothing yet.. i also followed a guide that was made for tmobile.. going to the service menu and modifying a bunch of stuff but it did not work either.
i dont know what else to do.. maybe the issue is that the phone is not activated on sprint?? but im using it outside de US, with a non US sim card.
and yes i also tried gsm/umts a lot of times .

rodmc123 said:
in mobile network it says 'UMTS' i was able to make "wcdma only" work (i had to reset the network settings with ##72786# and make the unlock process again) but when is going to connect to 3g it gives me the "LTE esm 29 cannot establish wireless connection" error..also after the reset there is a green circle telling me to activate the phone in sprint (this was a phone with bad esn if im not wrong)..
i used hiapn and all that stuff, upgraded modem to MJA and nothing yet.. i also followed a guide that was made for tmobile.. going to the service menu and modifying a bunch of stuff but it did not work either.
i dont know what else to do.. maybe the issue is that the phone is not activated on sprint?? but im using it outside de US, with a non US sim card.
and yes i also tried gsm/umts a lot of times .
Click to expand...
Click to collapse
Un-install HiApn. I was getting the same message with HiApn. I am also using the phone outside the US.

tronac said:
Un-install HiApn. I was getting the same message with HiApn. I am also using the phone outside the US.
Click to expand...
Click to collapse
i uninstalled hiapn and i got the same message..:crying::crying:

up!
come on.. i know there must be someone who knows why i get this message !!

Does your menu look like this?
Sent from my SPH-L720 using XDA Premium 4 mobile app

PRL writing

So has anyone been able to successfully set the L720 into diag mode and flash a prl? Just curious...

been using prl helper and flashing them sucessfully.. I'm not sure diag mode is necessary (unless i'm not understanding the question fully)
check here...
http://forum.xda-developers.com/showthread.php?t=2476283
basically install the apk, bring it up, select the prl and it reboots with the new one..

RealSpArTeN said:
So has anyone been able to successfully set the L720 into diag mode and flash a prl? Just curious...
Click to expand...
Click to collapse
regards prl writing yes I did, you must enable prl writing look at this
http://forum.xda-developers.com/showthread.php?t=2262450
then put a copy of your prl file into the internal sd.
then dial ##3282# you'll find a prl write command.
Thanks.

ekz13 said:
been using prl helper and flashing them sucessfully.. I'm not sure diag mode is necessary
Click to expand...
Click to collapse
jam97 said:
I have tried DFS and CDMA WorkShop with no success at all!!
Click to expand...
Click to collapse
Thanks for the replies guys, I meant to mention flashing a PRL under a AOSP rom

annnnnd....I got nothing..sorry..

[Q] Nexus 4 Lollipop 5.1 How do I enable LTE 4G

I updated to stock 5.1 from 5.0.2 yesterday. Prior to this I had LTE 4G on T-Mobile. Now I'm back to 3G . Does anyone else have this experience? and are ther any solutions out there I could use?
I'd value any input or advice on this issue.
Thanks

I tried too to revert 4g on my 5.1 n4 but after i wiped everything ( excepting system ... ) i got a lovely bsod ( blank screen of death ) i don't think is a sollution yet , if i done something wrong someone please explain us how to get it properly back w/o probs , wait for some ideas thanks .

You'll obviously need to be sure the hybrid modem is installed. Beyond that as I recall, I had to "force" it to see the LTE network by dialing *#*#4636#*#* and selecting "LTE only" for the connection. After that I was able to set it to "LTE/GSM auto" and it has worked correctly since.

jherbold said:
You'll obviously need to be sure the hybrid modem is installed. Beyond that as I recall, I had to "force" it to see the LTE network by dialing *#*#4636#*#* and selecting "LTE only" for the connection. After that I was able to set it to "LTE/GSM auto" and it has worked correctly since.
Click to expand...
Click to collapse
I tried that but it did not offer the ability to make that change. I could on 5.0.2. I'm not sure where to get the hybrid modem? any Ideas would be helpful. also does anyone know which hybrid modem to use for T-mobile? Thanks

Go to settings -> About Phone
The Android software version number and baseband (modem) version will be listed. If the last 2 digits of the baseband version is greater than 33, you will not have LTE capability.
https://play.google.com/store/apps/details?id=me.bpear.makomodem

jherbold said:
Go to settings -> About Phone
The Android software version number and baseband (modem) version will be listed. If the last 2 digits of the baseband version is greater than 33, you will not have LTE capability.
https://play.google.com/store/apps/details?id=me.bpear.makomodem
Click to expand...
Click to collapse
Thanks for the reply and info.
I did check that, but I'm not clear what you mean when you refer the Baseband Version last 2 digits
I also have that App installed and it does how seem to work with 5.1 It does not look like its been updated recently
any Ideas?

jherbold said:
You'll obviously need to be sure the hybrid modem is installed. Beyond that as I recall, I had to "force" it to see the LTE network by dialing *#*#4636#*#* and selecting "LTE only" for the connection. After that I was able to set it to "LTE/GSM auto" and it has worked correctly since.
Click to expand...
Click to collapse
Thank you man , you are the best , i followed your instructions , flashed the latest modem from the app (1.03 + 0.33 LTE Hybrid Modem) then enabled LTE Only in test menu , that was , thanks againd , already pressed the button , next time i give a beer

Are there instructions on how to apply the appropriate modem type and such?

marioc89 said:
Are there instructions on how to apply the appropriate modem type and such?
Click to expand...
Click to collapse
Download: https://drive.google.com/file/d/0B77BTW0zStYCS2JPNG1kNnNIamM/view?usp=sharing (LTE Enabler 2.13)
Reboot to Recovery and flash above LTE .zip
Reboot
Done

I'm sorry for being a little slow on this, but when you say reboot to recovery, what do you mean exactly? I have the file downloaded though. Is this a hack or is this something that was made for this phone by Google? I guess what I'm asking is, could I screw up my phone from doing this and if I do, can I revert back to where I had it prior to this if it doesn't work or don't like it?

marioc89 said:
I'm sorry for being a little slow on this, but when you say reboot to recovery, what do you mean exactly? I have the file downloaded though. Is this a hack or is this something that was made for this phone by Google? I guess what I'm asking is, could I screw up my phone from doing this and if I do, can I revert back to where I had it prior to this if it doesn't work or don't like it?
Click to expand...
Click to collapse
I guess you are asking the same questions in 2 threads. Download the enabler listed above to your pc.
Start up the Nexus Root Tool Kit
Connect your phone via usb
Then use the advance options and flash the filefrom your pc to your phone
I hope this helps Let meknow how it goes

marioc89 said:
I'm sorry for being a little slow on this, but when you say reboot to recovery, what do you mean exactly? I have the file downloaded though. Is this a hack or is this something that was made for this phone by Google? I guess what I'm asking is, could I screw up my phone from doing this and if I do, can I revert back to where I had it prior to this if it doesn't work or don't like it?
Click to expand...
Click to collapse
To help your self out It might be useful if you read the post from the following link http://forum.xda-developers.com/showpost.php?p=60115195&postcount=771
It will help you understand the whole process and how to do it. It will also give you lots of background on the issue.
To perform the "Flash" I use the Nexus Root Toolkit. which can be found here.
I hope this helps you. Let us know how it goes

This is perfect! Thank you!
I'm noticing that the settings done keep after a reboot. I don't have to reflash the modem, but I do have to go back into the 4636 settings to re-enable LTE. I've heard this might be fixable in the build.prop? Any thoughts?

ariesgodofwar said:
Download: https://drive.google.com/file/d/0B77BTW0zStYCS2JPNG1kNnNIamM/view?usp=sharing (LTE Enabler 2.13)
Reboot to Recovery and flash above LTE .zip
Reboot
Done
Click to expand...
Click to collapse
Can I do this straight from the phone or from a laptop? And what zip app do I open it with?

marioc89 said:
Can I do this straight from the phone or from a laptop? And what zip app do I open it with?
Click to expand...
Click to collapse
You do it straight from your phone. Download the file, boot into your Recovery, go to the folder you saved the file in (likely in your "Downloads" folder, and just flash the .zip file from your Phone's recovery, and it will do all the necessaries.

It worked flawlessly when I flashed that zip from recovery. All relevant settings changed from 3G to 4G and HSPA to LTE. Speed went from 10 to 36mbps (Telus Canada). ROM is 5.1.1 LMY48T

Hjicons said:
It worked flawlessly when I flashed that zip from recovery. All relevant settings changed from 3G to 4G and HSPA to LTE. Speed went from 10 to 36mbps (Telus Canada). ROM is 5.1.1 LMY48T
Click to expand...
Click to collapse
Did you flash from a custom recovery, twrp or cwm, or stock recovery ?
Sent from my Nexus 6 using Tapatalk

trent999 said:
Did you flash from a custom recovery, twrp or cwm, or stock recovery ?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
TWRP. BTW I tried different hybrid modems with "Nexus 4 Modem Flasher" app without any success.

ariesgodofwar said:
Download: https://drive.google.com/file/d/0B77BTW0zStYCS2JPNG1kNnNIamM/view?usp=sharing (LTE Enabler 2.13)
Reboot to Recovery and flash above LTE .zip
Reboot
Done
Click to expand...
Click to collapse
Thanks that got almost work for me but it says its for android 5.1+ and I am on android 6.0.1 aosp ROM.
But after that I flashed this and bingoo. I can use LTE only in Android 6.
Used this http://www.mediafire.com/?2thymqa7fiiyrqy
Now I can able to click on 'only LTE' from phone info
And it stays at LTE only.
Before this when I goto phone info and it got gsm or wcdma even I click on LTE now its working for me.
I found that zip file from anywhere else I don't know where so I had uploaded and shared here.

Here is what I found about version check. Give it a try if you wish
a) expand nexus-4-lte-enabler-v2.13.zip
b) edit META-INF\com\google\android\updater-script
c) replace 5.1 with 6.0.1 in this line
( is_substring("5.1", file_getprop("/system/build.prop","ro.build.version.release")) )
d) update zip with new file
e) flash zip
Sent from my Nexus 6 using Tapatalk

Nexus 6P(Stock) - 6.0 - Verizon Data Roaming not Working

Hello,
I am in South Africa and I can not get data to work. I have validated all settings:
Data Roaming is on.
Cellular Data is on
Preferred Network Type is Global (I have also changed to LTE / GSM / UMTS with no success)
I have removed SIM card / placed back in.
I have reset all network settings
I have placed into Safe Mode
I have called Verizon Global Support and they have validated all settings.
All without success
Android Version - 6.0
Security Patch level - November 1, 2015
Is there anything I am missing? This is frustrating.

on your phone dialer type *#*#4636#*#* then from the top menu select change band and select USA band and restart your phone.

chichu_9 said:
on your phone dialer type *#*#4636#*#* then from the top menu select change band and select USA band and restart your phone.
Click to expand...
Click to collapse
Thanks - I forget to mention I did in fact try that previously without success as well.

chichu_9 said:
on your phone dialer type *#*#4636#*#* then from the top menu select change band and select USA band and restart your phone.
Click to expand...
Click to collapse
Sorry, I did not previously perform the step you out-lined. I thought you were referring to restarting the band.
I just did as you instructed and now the phone is not connecting to the South African networks(previously phone and SMS worked.
Now in the Cellular Network Settings, there is a new option 'System Select' which is selected to 'Automatic' with the other option 'Home only.'
Ideas?

smripley said:
Thanks - I forget to mention I did in fact try that previously without success as well.
Click to expand...
Click to collapse
Did you check you have all the APN's setup in your device? you should see 6 in that list. Verizon Internet APN should be selected.

chichu_9 said:
Did you check you have all the APN's setup in your device? you should see 6 in that list. Verizon Internet APN should be selected.
Click to expand...
Click to collapse
With regards to the APN, I only have four:
EHRPD - VZW Roaming CBS
EHRPD - VZW Roaming IMS
LTE - VZW Roaming FOTA
LTE - VZW Roaming Internet
And nothing is selected.

@chichu_9
Can you help? After selecting USA band, phone is no longer connecting to the cellular network...

smripley said:
@chichu_9
Can you help? After selecting USA band, phone is no longer connecting to the cellular network...
Click to expand...
Click to collapse
Change your band to Band 6. turn off your phone and restart.
As for System select, it should be set to Change CDMA roaming Mode. Preferred network type, set it to Global.
For APN, if nothing is selected then select the one that says, Roaming Internet.

chichu_9 said:
Change your band to Band 6. turn off your phone and restart.
As for System select, it should be set to Change CDMA roaming Mode. Preferred network type, set it to Global.
Click to expand...
Click to collapse
Tried that and it does not work.

smripley said:
Tried that and it does not work.
Click to expand...
Click to collapse
Sorry added more comments take a look at it. I had a similar issue in Mexico, I made the following changes to make it work. Once you get your network connected, then you can go back and change it to USA band if you want.

chichu_9 said:
Sorry added more comments take a look at it. I had a similar issue in Mexico, I made the following changes to make it work. Once you get your network connected, then you can go back and change it to USA band if you want.
Click to expand...
Click to collapse
System Select should be 'Automatic?' I tried both 'Automatic and 'Home Only' and the other settings you specified and it is still not connecting.
I also did a factory reset and still not working??
Please help/

smripley said:
System Select should be 'Automatic?' I tried both 'Automatic and 'Home Only' and the other settings you specified and it is still not connecting.
I also did a factory reset and still not working??
Please help/
Click to expand...
Click to collapse
OK, if none of those are working. Then your best bet is to reflash a radio. You will have to unlock your bootloader, Go to fastboot mode and use the flash all script, to reflash a factory image to your device.
There is a thread in the General help section, that can guide you thru the process. Remember unlocking bootloader will wipe your phone clean.

chichu_9 said:
OK, if none of those are working. Then your best bet is to reflash a radio. You will have to unlock your bootloader, Go to fastboot mode and use the flash all script, to reflash a factory image to your device.
There is a thread in the General help section, that can guide you thru the process. Remember unlocking bootloader will wipe your phone clean.
Click to expand...
Click to collapse
So, I'm going down that path, downloaded the 'angler' image for the Nexus 6P, unlocked the bootloader, issue ./flash-all.sh and it comes back(using terminal on mac) and says:
--------------------------------------------
Bootloader Version...: angler-02.01
Baseband Version.....: angler-02.15
Serial Number........: xxxxxxx
--------------------------------------------
checking product...
FAILED
Device product is 'angler'.
Update requires 'bullhead'.
__
I need to download 'bullhead' then - although it says that is for the Nexus 5x? Feel like something is jacked.

smripley said:
So, I'm going down that path, downloaded the 'angler' image for the Nexus 6P, unlocked the bootloader, issue ./flash-all.sh and it comes back(using terminal on mac) and says:
--------------------------------------------
Bootloader Version...: angler-02.01
Baseband Version.....: angler-02.15
Serial Number........: xxxxxxx
--------------------------------------------
checking product...
FAILED
Device product is 'angler'.
Update requires 'bullhead'.
__
I need to download 'bullhead' then - although it says that is for the Nexus 5x? Feel like something is jacked.
Click to expand...
Click to collapse
Something is not right. It should ask you to download Angler not Bullhead. Dont install Bullhead on your device. Do you have the right version of ADB fastboot?

chichu_9 said:
Something is not right. It should ask you to download Angler not Bullhead. Dont install Bullhead on your device. Do you have the right version of ADB fastboot?
Click to expand...
Click to collapse
Yes, I believe I do.
Can you link me to the files just in case?

smripley said:
Yes, I believe I do.
Can you link me to the files just in case?
Click to expand...
Click to collapse
I downloaded the new files from here:
http://forum.xda-developers.com/nex...stboot-mac-t3234755/post63519142#post63519142

smripley said:
I downloaded the new files from here:
http://forum.xda-developers.com/nex...stboot-mac-t3234755/post63519142#post63519142
Click to expand...
Click to collapse
Here you go https://dl.google.com/dl/android/aosp/angler-mmb29m-factory-8c31db3f.tgz

chichu_9 said:
Here you go https://dl.google.com/dl/android/aosp/angler-mmb29m-factory-8c31db3f.tgz
Click to expand...
Click to collapse
I'm an idiot. I downloaded 'bullhead' instead of 'angler' from the beginning. Flash is going through now - hopefully this will fix the radio problem. Will report back shortly.

smripley said:
I'm an idiot. I downloaded 'bullhead' instead of 'angler' from the beginning. Flash is going through now - hopefully this will fix the radio problem. Will report back shortly.
Click to expand...
Click to collapse
Restored factory image and still not working. Not connecting.
What should I do?

smripley said:
Restored factory image and still not working. Not connecting.
What should I do?
Click to expand...
Click to collapse
What is not working? What is not connecting now? if its only the Data part, then did you go back and re-enable data roaming?