hey, i unlocked the phone to use in gsm networks (im outside the us) but 3g is not working, it says lte:esm - 29 emm - x unable to stablish a wireless data connection i get signal and i can make calls, but no 3g.
i set the gsm/umts mode but i still get this message when i try to use my data connection.
rodmc123 said:
hey, i unlocked the phone to use in gsm networks (im outside the us) but 3g is not working, it says lte:esm - 29 emm - x unable to stablish a wireless data connection i get signal and i can make calls, but no 3g.
i set the gsm/umts mode but i still get this message when i try to use my data connection.
Click to expand...
Click to collapse
I had the exact same problem. After unlocking I updated to MJA. This solved the problem because in MJA you can add/edit the APN settings.
tronac said:
I had the exact same problem. After unlocking I updated to MJA. This solved the problem because in MJA you can add/edit the APN settings.
Click to expand...
Click to collapse
but i can edit apn settings right now on mdc also lol.. atleast the menu let me do that.. but i still get the error .. ill try updating to mja,
did you have the same message error? "lte:esm - 29 emm - x unable to stablish a wireless data connection"
can you tell me how you did it? just downloaded MJA modem and flashed it? is there something extra i should know?
rodmc123 said:
but i can edit apn settings right now on mdc also lol.. atleast the menu let me do that.. but i still get the error .. ill try updating to mja,
Click to expand...
Click to collapse
Know you cannot go back to 4.2 ever
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
Know you cannot go back to 4.2 ever
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
my phone was already in stock 4.3 when i got it.. so i downgraded the moden to mdc through odin to unlock it, but 3g is not working, if upgrading to mja again works i dont care. i just wanna know im not going to brick the phone with this.
rodmc123 said:
my phone was already in stock 4.3 when i got it.. so i downgraded the moden to mdc through odin to unlock it, but 3g is not working, if upgrading to mja again works i dont care. i just wanna know im not going to brick the phone with this.
Click to expand...
Click to collapse
Oh you meant MDC as modem only lol.
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
Oh you meant MDC as modem only lol.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
damn.. i upgraded to MJA modem and i still get this message "LTE: ESM - 29 EMM - X unable to establish a wireless data connection"
anyone knows this error? i need help!!
rodmc123 said:
anyone knows this error? i need help!!
Click to expand...
Click to collapse
When you click settings>more>about device>status what does it say? Does it mention what type of network? Edge, HSPA?
You must make sure that in the Network selection you selected GSM/UMTS.
tronac said:
When you click settings>more>about device>status what does it say? Does it mention what type of network? Edge, HSPA?
Click to expand...
Click to collapse
in mobile network it says 'UMTS' i was able to make "wcdma only" work (i had to reset the network settings with ##72786# and make the unlock process again) but when is going to connect to 3g it gives me the "LTE esm 29 cannot establish wireless connection" error..also after the reset there is a green circle telling me to activate the phone in sprint (this was a phone with bad esn if im not wrong)..
i used hiapn and all that stuff, upgraded modem to MJA and nothing yet.. i also followed a guide that was made for tmobile.. going to the service menu and modifying a bunch of stuff but it did not work either.
i dont know what else to do.. maybe the issue is that the phone is not activated on sprint?? but im using it outside de US, with a non US sim card.
and yes i also tried gsm/umts a lot of times .
rodmc123 said:
in mobile network it says 'UMTS' i was able to make "wcdma only" work (i had to reset the network settings with ##72786# and make the unlock process again) but when is going to connect to 3g it gives me the "LTE esm 29 cannot establish wireless connection" error..also after the reset there is a green circle telling me to activate the phone in sprint (this was a phone with bad esn if im not wrong)..
i used hiapn and all that stuff, upgraded modem to MJA and nothing yet.. i also followed a guide that was made for tmobile.. going to the service menu and modifying a bunch of stuff but it did not work either.
i dont know what else to do.. maybe the issue is that the phone is not activated on sprint?? but im using it outside de US, with a non US sim card.
and yes i also tried gsm/umts a lot of times .
Click to expand...
Click to collapse
Un-install HiApn. I was getting the same message with HiApn. I am also using the phone outside the US.
tronac said:
Un-install HiApn. I was getting the same message with HiApn. I am also using the phone outside the US.
Click to expand...
Click to collapse
i uninstalled hiapn and i got the same message..:crying::crying:
up!
come on.. i know there must be someone who knows why i get this message !!
Does your menu look like this?
Sent from my SPH-L720 using XDA Premium 4 mobile app
Related
Hi.
I've just purchased a new AT&T atrix 4g.
I want to unlock it and install cm7 rom.
I did the automatic script unlock boot loader and the device in now unlocked.
The thing is that when i load my device now i get to the motion blur setup and i cannot go on because the phone cannot find 3g connection or wifi as well.
Regarding Wifi: It scans over and over and turns off wifi by itself and then again until suddenly it shows wifi error. after that the phone reboots it self.
Any Idea's?
Skip blure: http://forum.xda-developers.com/showthread.php?t=1027994
It worked... but still wifi error
Zeljko1234 said:
Skip blure: http://forum.xda-developers.com/showthread.php?t=1027994
Click to expand...
Click to collapse
Thank you, managed to skip the motoblur setup.
The thing is that I'm still getting the wifi error.
Any idea?
What kind of error? Check security of APN.
Zeljko1234 said:
What kind of error? Check security of APN.
Click to expand...
Click to collapse
How do i do that?
What exactly do i need to check?
I have another question.
If i will do a hard reset for my device, will it work?
Please remember that the device has an unlocked bootloader(thats it, i havent rooted or installed and recovery)
nimrodm said:
How do i do that?
What exactly do i need to check?
Click to expand...
Click to collapse
I mean AP, not APN. Settings in your access point, router.
Could someone help me out please,
I've tried to unlock my phone but I can't get to the main menu of the service mode.
I accessed *#0011#
tapped menu, select back
tapped menu, select input, inputted 1, ok
waited as well as tapped menu, select back
it doesn't go anywhere or changes menu.
Any ideas?
guitaoo7 said:
Could someone help me out please,
I've tried to unlock my phone but I can't get to the main menu of the service mode.
I accessed *#0011#
tapped menu, select back
tapped menu, select input, inputted 1, ok
waited as well as tapped menu, select back
it doesn't go anywhere or changes menu.
Any ideas?
Click to expand...
Click to collapse
What firmware, modem, rom are you using? Most likely is the modem causing it.
I bought it from eBay but i'm sure those things have not been tampered with.
It is locked onto UK's three mobile network.
It's on I9505XXUBMEA
guitaoo7 said:
I bought it from eBay but i'm sure those things have not been tampered with.
It is locked onto UK's three mobile network.
It's on I9505XXUBMEA
Click to expand...
Click to collapse
The modem doesn't allow to access the service menu. You need XXUAME2 or older modem to get access to service menu.
This thread has all modems available to download.
As for the phone being carrier-locked, I'm not sure how to solve that. All phone sold in my country are unlocked.
so, i cant unlock the phone via the servicemode then?
and since it's carrier locked, i can't downgrade the modem? or can i?
guitaoo7 said:
so, i cant unlock the phone via the servicemode then?
and since it's carrier locked, i can't downgrade the modem? or can i?
Click to expand...
Click to collapse
You can downgrade the modem. This can be done by downloading modem from the thread I told you, and flashing it through Odin.
Edit: Be sure to follow the instructions on how to properly flash modem.
changing the modem will not affect the carrier lock will it?
I'm worried I might not be able to use any sim after changing the modem XD
guitaoo7 said:
changing the modem will not affect the carrier lock will it?
I'm worried I might not be able to use any sim after changing the modem XD
Click to expand...
Click to collapse
If you're scared, you can always do a full system backup using custom recovery. If any problem occurs, just restore the backup.
Also, I just realized i can't find the settings to enable debugging on my S4
Can i still use customer recovery, my phone's not rooted and it boots with the three mobile logo
guitaoo7 said:
Also, I just realized i can't find the settings to enable debugging on my S4
Can i still use customer recovery, my phone's not rooted and it boots with the three mobile logo
Click to expand...
Click to collapse
Custom recovery does NOT need root. It replaces the stock recovery of the phone. Same goes for modem.
Did you have developer options at your settings? If not, go to settings>about device. Press the 'Build Number' 7 or 8 times. (Cannot remember exactly how many times). The developer option will then be available.
yeah, just figured it out. ok i'm going to try it now using ME2 like you said... hopefully nothing bad happens
changed modem and can access menu now. thanks a bunch dude
guitaoo7 said:
changed modem and can access menu now. thanks a bunch dude
Click to expand...
Click to collapse
No problem.
Next time use the search function if possible. There's actually quite alot of threads and posts about this.
lzk123 said:
No problem.
Next time use the search function if possible. There's actually quite alot of threads and posts about this.
Click to expand...
Click to collapse
I have used the search function, but fear is killing me.
wherever I go, I find that the flashing process requires that the phone is unlocked.
can you please let me know how to go about it?
I downloaded the 02 modem firmware now. and Odin, but can't go any further
Hello, sorry to bring back this thread, but I have a weird problem.
I tried every possibility and variants of this unlock method (*#0011#) but nothing changes. It still asks for the network code.
I flashed a ME2 modem, and same thing ..
Is there anything I missed ?
Hi there
Recently I encountered some issues with my Note 3. google playstore did not allow me to sign in and no notifications appeared on my screen (the phone has root, and TWRP). I decided to try out CM11, downloaded it from the original site along with gapps on my internal sd. i wiped data cache .. the usual and installed the two files except they did not do anything. I download the custom recovery 1.3gb file using odin. booted up and noticed that my service is not working. i called my service provider to see if the problem was on their end but wasnt. i factory reset the phone via settings... same problem. i went into recovery wiped data and cache booted up and same issue.
IMEI= has not been blacklisted
I occasionally do see bars appear however no change in service status
I tried flashing TWRP again and installing CM11 except i get a "failed" message "unable to mount"
I sure hope I did not kill this phone
any idea how do i get service back on my phone? everything else on the phone works besides service provider....
Thank you very much!!
Not sure if this means anything ...
When you had it working with a Touchwiz Rom it could have been your APN settings that were not allowing you to get signal.
If I were you I would start fresh and download the factory image from sammobile and flash it again using Odin. We can start troubleshooting from there.
Did you use this tutorial to get a custom recovery installed? Its really straightforward and I recommend this method over all others.
http://forum.xda-developers.com/showthread.php?t=2792819
RacecarBMW said:
When you had it working with a Touchwiz Rom it could have been your APN settings that were not allowing you to get signal.
If I were you I would start fresh and download the factory image from sammobile and flash it again using Odin. We can start troubleshooting from there.
Did you use this tutorial to get a custom recovery installed? Its really straightforward and I recommend this method over all others.
http://forum.xda-developers.com/showthread.php?t=2792819
Click to expand...
Click to collapse
I followed the steps exactly and I got this error.
MacProo said:
I followed the steps exactly and I got this error.
Click to expand...
Click to collapse
1. Check for Reactivation Lock
2. Check that you are NOT downgrading your bootloader.
EDIT: You are downgrading your bootloader, or else you wouldn't get the aboot fused 2 > binary 2 error.
You will have to flash stock, go to http://www.sammobile.com/firmwares/3/?download=26660
Flash that in AP of Odin. Then you will be reverted back to stock.
nicholaschum said:
1. Check for Reactivation Lock
2. Check that you are NOT downgrading your bootloader.
EDIT: You are downgrading your bootloader, or else you wouldn't get the aboot fused 2 > binary 2 error.
You will have to flash stock, go to http://www.sammobile.com/firmwares/3/?download=26660
Flash that in AP of Odin. Then you will be reverted back to stock.
Click to expand...
Click to collapse
I downloaded that file, used ODIN V3.09 selected the file under AP. the flash worked. bootloader version NB7 however I still do not get any service
i know the issue is not SIM card related. I swapped it to another phone and received service
MacProo said:
I downloaded that file, used ODIN V3.09 selected the file under AP. the flash worked. bootloader version NB7 however I still do not get any service
i know the issue is not SIM card related. I swapped it to another phone and received service
Click to expand...
Click to collapse
You might have to set up your APN settings after you have done that. You can google the APN settings for your carrier and then put them in manually by going Settings > Connections > More Networks > Mobile Networks > Access Point Names
You'll be able to add them in there.
MacProo said:
I downloaded that file, used ODIN V3.09 selected the file under AP. the flash worked. bootloader version NB7 however I still do not get any service
i know the issue is not SIM card related. I swapped it to another phone and received service
Click to expand...
Click to collapse
Is your IMEI (*#06#) a real IMEI that matches with the values at the back of your phone, and not just null/null?
nicholaschum said:
Is your IMEI (*#06#) a real IMEI that matches with the values at the back of your phone, and not just null/null?
Click to expand...
Click to collapse
*#06# gives me a matching IMEI with the back of the phone
MacProo said:
*#06# gives me a matching IMEI with the back of the phone
Click to expand...
Click to collapse
Put your SIM in your phone, download Advanced Signal Status from the Play Store, and show us some screenshots.
In this menu you get to see more information about what is going on with your network.
Have you also made sure your APN settings are set correctly?
RacecarBMW said:
You might have to set up your APN settings after you have done that. You can google the APN settings for your carrier and then put them in manually by going Settings > Connections > More Networks > Mobile Networks > Access Point Names
You'll be able to add them in there.
Click to expand...
Click to collapse
nicholaschum said:
Put your SIM in your phone, download Advanced Signal Status from the Play Store, and show us some screenshots.
In this menu you get to see more information about what is going on with your network.
Have you also made sure your APN settings are set correctly?
Click to expand...
Click to collapse
I compared APN setting between my two devices (both are the same carrier and same model of phone ((borrowing from someone)). APN settings were the same except APN Protocol and APN roaming protocol were dark and could not be changed. even though i couldn't change it it was still listed as ipv4 same as the working phone.
If you need any other information, please let me know
MacProo said:
I compared APN setting between my two devices (both are the same carrier and same model of phone ((borrowing from someone)). APN settings were the same except APN Protocol and APN roaming protocol were dark and could not be changed. even though i couldn't change it it was still listed as ipv4 same as the working phone.
If you need any other information, please let me know
Click to expand...
Click to collapse
Any other suggestions? the phone is still dead
You could try resetting the nvram. Check my thread here: http://forum.xda-developers.com/showthread.php?t=2754957
My thread is for the 900t, but it should be the same for your model.
Sent from my leanKernel 3.4 powered stock 4.4.2 (NF1) SM-N900T
toastido said:
You could try resetting the nvram. Check my thread here: http://forum.xda-developers.com/showthread.php?t=2754957
My thread is for the 900t, but it should be the same for your model.
Sent from my leanKernel 3.4 powered stock 4.4.2 (NF1) SM-N900T
Click to expand...
Click to collapse
I gave that a try, rebooted the phone, attempted a call and "Not registered on network"
would changing the ROM have any impact on the service for whatever reason? i gave CM11 a try but wouldn't instal.
Seeing all that you've tried, the one thing i don't see tried is the sim card. Have you tried your sim in another phone, or another known good sim in yours? The fact it gets signal but doesn't register with the network makes me think the sim had somehow gotten corrupted.
Sent from my leanKernel 3.4 powered stock 4.4.2 (NF1) SM-N900T
toastido said:
Seeing all that you've tried, the one thing i don't see tried is the sim card. Have you tried your sim in another phone, or another known good sim in yours? The fact it gets signal but doesn't register with the network makes me think the sim had somehow gotten corrupted.
Sent from my leanKernel 3.4 powered stock 4.4.2 (NF1) SM-N900T
Click to expand...
Click to collapse
That'd be a bit weird, but yeah you should ask your friend's phone to try your SIM card.
nicholaschum said:
That'd be a bit weird, but yeah you should ask your friend's phone to try your SIM card.
Click to expand...
Click to collapse
As of right now I am borrowing a friends phone (also a 900w8) with my SIM card and everything seems to be working
If anyone has ANY suggestions I'm willing to give that a try.
I appreciate everyones suggestions and help!
toastido said:
Seeing all that you've tried, the one thing i don't see tried is the sim card. Have you tried your sim in another phone, or another known good sim in yours? The fact it gets signal but doesn't register with the network makes me think the sim had somehow gotten corrupted.
Sent from my leanKernel 3.4 powered stock 4.4.2 (NF1) SM-N900T
Click to expand...
Click to collapse
The SIM does work on another phone.
MacProo said:
The SIM does work on another phone.
Click to expand...
Click to collapse
I'm not sure then. hopefully someone can come in from here.... sorry man, best of luck!
Sent from my leanKernel 3.4 powered stock 4.4.2 (NF1) SM-N900T
toastido said:
I'm not sure then. hopefully someone can come in from here.... sorry man, best of luck!
Sent from my leanKernel 3.4 powered stock 4.4.2 (NF1) SM-N900T
Click to expand...
Click to collapse
Thank you!
nicholaschum said:
1. Check for Reactivation Lock
2. Check that you are NOT downgrading your bootloader.
EDIT: You are downgrading your bootloader, or else you wouldn't get the aboot fused 2 > binary 2 error.
You will have to flash stock, go to http://www.sammobile.com/firmwares/3/?download=26660
Flash that in AP of Odin. Then you will be reverted back to stock.
Click to expand...
Click to collapse
Would trying your method (http://forum.xda-developers.com/showthread.php?t=2792819) but changing the bootloader to NB7 work?
"If your bootloader is of version NA2 (somehow) or NB7, skip to the contents of Step 4," rather than proceeding to step 4 going to step 1?
I updated to stock 5.1 from 5.0.2 yesterday. Prior to this I had LTE 4G on T-Mobile. Now I'm back to 3G . Does anyone else have this experience? and are ther any solutions out there I could use?
I'd value any input or advice on this issue.
Thanks
I tried too to revert 4g on my 5.1 n4 but after i wiped everything ( excepting system ... ) i got a lovely bsod ( blank screen of death ) i don't think is a sollution yet , if i done something wrong someone please explain us how to get it properly back w/o probs , wait for some ideas thanks .
You'll obviously need to be sure the hybrid modem is installed. Beyond that as I recall, I had to "force" it to see the LTE network by dialing *#*#4636#*#* and selecting "LTE only" for the connection. After that I was able to set it to "LTE/GSM auto" and it has worked correctly since.
jherbold said:
You'll obviously need to be sure the hybrid modem is installed. Beyond that as I recall, I had to "force" it to see the LTE network by dialing *#*#4636#*#* and selecting "LTE only" for the connection. After that I was able to set it to "LTE/GSM auto" and it has worked correctly since.
Click to expand...
Click to collapse
I tried that but it did not offer the ability to make that change. I could on 5.0.2. I'm not sure where to get the hybrid modem? any Ideas would be helpful. also does anyone know which hybrid modem to use for T-mobile? Thanks
Go to settings -> About Phone
The Android software version number and baseband (modem) version will be listed. If the last 2 digits of the baseband version is greater than 33, you will not have LTE capability.
https://play.google.com/store/apps/details?id=me.bpear.makomodem
jherbold said:
Go to settings -> About Phone
The Android software version number and baseband (modem) version will be listed. If the last 2 digits of the baseband version is greater than 33, you will not have LTE capability.
https://play.google.com/store/apps/details?id=me.bpear.makomodem
Click to expand...
Click to collapse
Thanks for the reply and info.
I did check that, but I'm not clear what you mean when you refer the Baseband Version last 2 digits
I also have that App installed and it does how seem to work with 5.1 It does not look like its been updated recently
any Ideas?
jherbold said:
You'll obviously need to be sure the hybrid modem is installed. Beyond that as I recall, I had to "force" it to see the LTE network by dialing *#*#4636#*#* and selecting "LTE only" for the connection. After that I was able to set it to "LTE/GSM auto" and it has worked correctly since.
Click to expand...
Click to collapse
Thank you man , you are the best , i followed your instructions , flashed the latest modem from the app (1.03 + 0.33 LTE Hybrid Modem) then enabled LTE Only in test menu , that was , thanks againd , already pressed the button , next time i give a beer
Are there instructions on how to apply the appropriate modem type and such?
marioc89 said:
Are there instructions on how to apply the appropriate modem type and such?
Click to expand...
Click to collapse
Download: https://drive.google.com/file/d/0B77BTW0zStYCS2JPNG1kNnNIamM/view?usp=sharing (LTE Enabler 2.13)
Reboot to Recovery and flash above LTE .zip
Reboot
Done
I'm sorry for being a little slow on this, but when you say reboot to recovery, what do you mean exactly? I have the file downloaded though. Is this a hack or is this something that was made for this phone by Google? I guess what I'm asking is, could I screw up my phone from doing this and if I do, can I revert back to where I had it prior to this if it doesn't work or don't like it?
marioc89 said:
I'm sorry for being a little slow on this, but when you say reboot to recovery, what do you mean exactly? I have the file downloaded though. Is this a hack or is this something that was made for this phone by Google? I guess what I'm asking is, could I screw up my phone from doing this and if I do, can I revert back to where I had it prior to this if it doesn't work or don't like it?
Click to expand...
Click to collapse
I guess you are asking the same questions in 2 threads. Download the enabler listed above to your pc.
Start up the Nexus Root Tool Kit
Connect your phone via usb
Then use the advance options and flash the filefrom your pc to your phone
I hope this helps Let meknow how it goes
marioc89 said:
I'm sorry for being a little slow on this, but when you say reboot to recovery, what do you mean exactly? I have the file downloaded though. Is this a hack or is this something that was made for this phone by Google? I guess what I'm asking is, could I screw up my phone from doing this and if I do, can I revert back to where I had it prior to this if it doesn't work or don't like it?
Click to expand...
Click to collapse
To help your self out It might be useful if you read the post from the following link http://forum.xda-developers.com/showpost.php?p=60115195&postcount=771
It will help you understand the whole process and how to do it. It will also give you lots of background on the issue.
To perform the "Flash" I use the Nexus Root Toolkit. which can be found here.
I hope this helps you. Let us know how it goes
This is perfect! Thank you!
I'm noticing that the settings done keep after a reboot. I don't have to reflash the modem, but I do have to go back into the 4636 settings to re-enable LTE. I've heard this might be fixable in the build.prop? Any thoughts?
ariesgodofwar said:
Download: https://drive.google.com/file/d/0B77BTW0zStYCS2JPNG1kNnNIamM/view?usp=sharing (LTE Enabler 2.13)
Reboot to Recovery and flash above LTE .zip
Reboot
Done
Click to expand...
Click to collapse
Can I do this straight from the phone or from a laptop? And what zip app do I open it with?
marioc89 said:
Can I do this straight from the phone or from a laptop? And what zip app do I open it with?
Click to expand...
Click to collapse
You do it straight from your phone. Download the file, boot into your Recovery, go to the folder you saved the file in (likely in your "Downloads" folder, and just flash the .zip file from your Phone's recovery, and it will do all the necessaries.
It worked flawlessly when I flashed that zip from recovery. All relevant settings changed from 3G to 4G and HSPA to LTE. Speed went from 10 to 36mbps (Telus Canada). ROM is 5.1.1 LMY48T
Hjicons said:
It worked flawlessly when I flashed that zip from recovery. All relevant settings changed from 3G to 4G and HSPA to LTE. Speed went from 10 to 36mbps (Telus Canada). ROM is 5.1.1 LMY48T
Click to expand...
Click to collapse
Did you flash from a custom recovery, twrp or cwm, or stock recovery ?
Sent from my Nexus 6 using Tapatalk
trent999 said:
Did you flash from a custom recovery, twrp or cwm, or stock recovery ?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
TWRP. BTW I tried different hybrid modems with "Nexus 4 Modem Flasher" app without any success.
ariesgodofwar said:
Download: https://drive.google.com/file/d/0B77BTW0zStYCS2JPNG1kNnNIamM/view?usp=sharing (LTE Enabler 2.13)
Reboot to Recovery and flash above LTE .zip
Reboot
Done
Click to expand...
Click to collapse
Thanks that got almost work for me but it says its for android 5.1+ and I am on android 6.0.1 aosp ROM.
But after that I flashed this and bingoo. I can use LTE only in Android 6.
Used this http://www.mediafire.com/?2thymqa7fiiyrqy
Now I can able to click on 'only LTE' from phone info
And it stays at LTE only.
Before this when I goto phone info and it got gsm or wcdma even I click on LTE now its working for me.
I found that zip file from anywhere else I don't know where so I had uploaded and shared here.
Here is what I found about version check. Give it a try if you wish
a) expand nexus-4-lte-enabler-v2.13.zip
b) edit META-INF\com\google\android\updater-script
c) replace 5.1 with 6.0.1 in this line
( is_substring("5.1", file_getprop("/system/build.prop","ro.build.version.release")) )
d) update zip with new file
e) flash zip
Sent from my Nexus 6 using Tapatalk
My brother who lives in dubai used his sim card in this phone but ever since i got the phone in Pakistan ive tried using my sim but i get no service.
My guess is it only works with 4g LTE but i cant try cuz where i live here's only 3g and 2g coverage.
So i started using it as a wifi tablet.
Dialed *#06# and it showed both imei numbers but ever si ce i updated to purenexus 7.1.2 rom it gives me the same service error but dialing *#06# gives nothing but two plain zeroes like in the screenshot. Can anyone please help me resolve this i would greatly appreciate any help regarding this.please help my phone is useless without a sim card.
Screenshots show how it detects the sim card perfectly and gets the number.
-searches for available networks but cant register on a network:crying:
-Screenshots
alihassan1397 said:
-Screenshots
Click to expand...
Click to collapse
Do the network settings reset, see if it works. if not, install app called LTE Discovery and reset thru it. if still fails, flash stock rom
pijes said:
Do the network settings reset, see if it works. if not, install app called LTE Discovery and reset thru it. if still fails, flash stock rom
Click to expand...
Click to collapse
Please bro u gotta help me. Non of it is workin. I flashed a debloated version of stock rom through
Twrp. But imei is still zero. Im freaking out I don't know what to do
alihassan1397 said:
Please bro u gotta help me. Non of it is workin. I flashed a debloated version of stock rom through
Twrp. But imei is still zero. Im freaking out I don't know what to do
Click to expand...
Click to collapse
Flash stock rom using rsdlite
pijes said:
Do the network settings reset, see if it works. if not, install app called LTE Discovery and reset thru it. if still fails, flash stock rom
Click to expand...
Click to collapse
pijes said:
Flash stock rom using rsdlite
Click to expand...
Click to collapse
I've never used rsdlite. Can u please provide me a tutorial for my phone and how I can flash all the files. I only know flashing through fastboot or twrp. Thanks
EDIT: will try this tomorrow when I have access to my pc.
https://forum.xda-developers.com/moto-x-play/general/guide-how-to-flash-factory-image-using-t3545303