Related
Hi all
I cant seem to find a definitive answer to this and Samsung support have not been very helpful.
When I try to install the drivers for the Galaxy S when connected to Kies I get a driver failed to load message.
It seems to be the MTP driver.
This is on 32 bit W7 laptop.
Does anyone have a solution to this? With Froyo coming but only via Kies it is becoming a bit desperate!
Thanks in advance
Simon
you are not alone my friend, everyone have grief with Kies
after installing Kies, try the option to Install Driver inside the Kies app
see if that helps
next alternative is to install Android SDK drivers
There seems to be a lot of issues with Kies. Mine is 'MainStage has stopped working'.
However there is little, or no, support for it. Loads of Kies questions and reported issues have gone unanswered on this, and other, Android/Samsung forums.
I've just managed to get the Australian Kies release working on my XP laptop. 5 or 6 installs and uninstalls, cleaning folders out from bad uninstalls, looking for reminants left behind. It took ages, but now at least I managed to get it working and clean my Orange SGS and flash it to JM1.
Just going to copy and paste the tips I wrote up on VF when I'd wanted to use kies to upgrade firmware:
Yakumo said:
Kies direct download link : downloadcenter.samsung.com/content/SW/201009/20100903113039859/Kies_1.5.1.10074_45.exe
This is the most up to date version as of writing this, don't use the auto updater it can take 2 hours, ridiculous update system going file by file for 10,0000 files instead of a single download than unpacker.
Install Kies, then click kies at the top left, and with the phone not plugged in select driver recovery. when that is finished plug the phone in.
If you still have a problem with it connecting, with it looping the MTP connection on the phone.
the MTP connection bug has been identified at last and though there isn't an official fix yet, it's not too hard to sort out yourself
filenames with an extension of longer than 16 chars on your SD cause the MTP problem, so anything after the last "." on a filename that is longer than 16 chars.
I think the largest cause of this is probably the '.thumbdataX-XXXXXXXXXXX' file you will find in "DCIM/.thumbnails" with any file manager app. You can just delete this and then try connecting
I deleted that file, and the entire TunnyBrowser directory, and the SoundHound app entire cache directory.
This was the first time I'd had the problem since I got the phone and wiped my SD card, but I hadn't been taking photo's till recently, I have a lot of other apps installed. Clearing those 3 things fixed the problem for me immediately.
Once I had done that I was able to install the JM1 firmware successfully, the phones auto reboot after flash seemed to fail after the samsung logo came up - after leaving it a long time it didn't progress, but I pulled the battery out for 30 seconds and the phone was fine after that.
I had backed up all my apps with ASTRO file manager before the install, and contacts with kies, but I did not have to do any restore after the flash in the end. all contacts and apps were still there.
Click to expand...
Click to collapse
Have you tried Kies from Samsung Australia? They have the latest version (1.5.1.100853)
Meh, my Kies just killed itself, decided to update and now it bombs out every time I connect the phone, tried rolling it back, but its still screwed.
How hard can it be?
I originally posted a fix, but the server rollback killed it.
So here it goes again
Download the new version from australia
Then uninstall the old version from your PC
Then delete the \kies\ from \program files
Install the new version of kies from australia
Done
Sent from my GT-I9000M using XDA App
Greetings people ^ First of all Hi,im new to XDA
Awesome forum btw.
My question is : I have a SE X10i branded in Spain, Vodafone ES ...on R2BA024 (i think) and i wanna unbrand it to SE X10i UK Generic R2BA020 (That way i can get the 2.1 update faster,cause vodafone will take alot i think to get it rolling around)
Will it all work perfectly? I mean,will i concur with any problems?
Thanks in advance ^^
PS : My SIM Lock is off so i think ill be able to use any SIM i got
PS2: Sorry if this has been asked already ,i just couldnt find any posts regarding this.
I'm unlocked but branded Vodafone UK, build R2BA024 and would like some help in debranding too - so I can get the 2.1 faster.
I'm not sure how to debrand and what method will work
I have however managed to get root and have superuser permission (so i'm not a complete blonde)
Any help would be greatly appreciated
tia x
P.S. Hello and welcome xtrmshadow , I hope you dont mind me piggybacking your post
Please search the forums first before opening a new thread.
Go to one of the debrand threads where they have guides.
Sent from my X10i using XDA App
Ty ^^ And no mate i dont mind =) happy my thread will help more than just me out =)
xtrmshadow said:
Ty ^^ And no mate i dont mind =) happy my thread will help more than just me out =)
Click to expand...
Click to collapse
But there are already threads out there to help you out, before you posted yours- just a friendly reminder thats all, the more threads people open the more clogged up the forum and the harder to search
Anyway here you are
http://www.esato.com/board/viewtopic.php?topic=195467
Sent from my X10i using XDA App
jayman1986 said:
But there are already threads out there to help you out, before you posted yours- just a friendly reminder thats all, the more threads people open the more clogged up the forum and the harder to search
Anyway here you are
http://www.esato.com/board/viewtopic.php?topic=195467
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Thanks you for your time and effort Jayman
I had already searched the forum and came across the same method in that link you posted but I'm unsure if it works
this method doesnt work anymore need to debrand my other x10
Click to expand...
Click to collapse
Didn't work with mine either as all the Orange browser bookmards are still there.
Click to expand...
Click to collapse
I've tried this so many times now but it's just not working.
Click to expand...
Click to collapse
im having exactly the same problem, ive debranded my phone before also but i cant get it to work right now because the file name has changed and SEUS keeps overwriting the firmware im trying to put in my X10a
Click to expand...
Click to collapse
Try this I've copied this from Synlar's post.
****
There seems to be a lot of questions regarding the steps laid out in the official thread, so here I'll try doing a STEP BY STEP guide for those who are confused with the steps.
I borrowed some stuff from the original guide, so thanks Bin4ry, jerpelea and biktor_gj for everything!
NOTE: Before you begin, you should know that this process will wipe everything off your phone. So backup your contacts, and text messages and everything on your phone! Download a free backup program from the market to make backups onto your SD card, and after you're done everything, download that program again and restore everything from SD card. Your SD card remains fine.
1) Install SEUS (Sony Ericsson Update Service).
You can get it from here: http://www.sonyericsson.com/cws/download/1/110/61/1275980198/Update_Service_Setup-2.10.6.21.exe
2) Run SEUS, follow the prompts. You don't need to update the phone through it, but get the phone ready for updating. This process should install the drivers necessary for the rooting process.
Note: I suggest you keep your USB cable attached to that USB port. Remember which USB port of your computer it's attached to, as changing USB ports can lead to a bit of confusion for the next 2 steps!
3) To check if #2 was successful, click on Start, click Run, and type: regedit
In the Registry Editor that pops up, click on Computer, press CTRL+F, and search for this: USB\Vid_0fce&Pid_adde\
After it's finished finding, on the right side you'll see DeviceInstance, then it says REG_SZ, then it says something like USB\Vid_0fce&Pid_adde\5&270d2a78&0&3
You'll need that last bit (in this example: 5&270d2a78&0&3 Yours would probably be different). This is your DeviceID (you'll need it soon!)
Note: You may have multiple of these if you plugged the USB cord into many USB ports on your computer. Each USB port will give a different DeviceID, so if you have more than one DeviceID, you'll have to choose one, and if it doesn't work (you'll find out when you reach #5!) you will have to choose another one.
Alternatively, download the file in the next step and extract it, go to the folder called 1st, and run the DeviceID.jar file. It should give your DeviceID
4) Download this:
http://filevo.com/1nlq8wryo11u.html
or from here: http://rapidshare.com/files/404363083/i_R1FA16_ft.rar.html
Extract it.
In the step1 folder, you'll see a file called DeviceID.txt
Open it up, delete whatever's there, and put YOUR DeviceID (that you found from the previous step).
Save the file and close notepad.
Note: Make sure there are no extra spaces or lines after/before the DeviceID. The ONLY thing that should be in the file is your DeviceID, NO SPACES/LINES (for example, only this: 5&270d2a78&0&3 [yours will probably be different])
5) Take out the USB cable from your phone (leave it plugged into your computer)
Turn your phone OFF
Open up step1.cmd (it's not inside the step1 folder, but outside it), but DON'T PRESS ANYTHING
Now we have to put the phone into flash mode. This is how you do it:
Hold the Back button on your phone, and while holding the back button, insert the USB cable into the phone.
A green light should come on the phone (like when it's charging or a missed call)
Quickly "Press any key to continue..." in the open step1.cmd window.
Let it finish what it's doing. It will say "Press any key to continue..." after it's finished. Until then, DON'T touch anything!
If you get problems in this step, refer to this post:
http://forum.xda-developers.com/showpost.php?p=6970868&postcount=3
Here's a helpful video for common java issue: http://forum.xda-developers.com/showthread.php?t=713457
After completion, this will give you a Generic X10i R1FA016 firmware (check it by pressing the left button, go to settings>about phone and at the very bottom under build number)
Keep your phone plugged into the USB.
6) Download this:
http://filevo.com/yzmh8wlyrgtz.html
or from here: http://rapidshare.com/files/404359845/ROOT_F2v2.rar.html
Extract it.
DELETE step4 folder, step5 folder, step4.cmd and step5.cmd
Now we're going to put the phone into Debugging mode:
Turn your phone on if it's not already on.
Press the left button, go to Settings>Applications>Development and check on USB debugging, press OK in the popup. Plug the USB into the phone (in case you disconnected it). You should see an exclamation mark at the very top left of the screen of the phone.
Do NOT have the SD card mounted to your computer!
Note: This next step can take a while!
Open step2.cmd, don't press anything!
On the phone, a list of buttons will come up eventually. Press the 6th option (something about update from SDcard). ONLY PRESS IT ONCE!
Leave your phone alone. Go to the washroom or eat a snack.
You'll see the progress on the phone screen, as it installs the package. Leave everything alone.
After completion, this will give you a Generic X10i R2BA023 firmware.
If you get problems, try this post: http://forum.xda-developers.com/showpost.php?p=7003121&postcount=1122
7) The phone should be on, USB plugged in, and already in USB debugging mode.
Open step3.cmd, and 'Press any key to continue'
Let it finish what it's doing, it will say 'Press any key to continue' at the end after it's finished.
After completion, this will give you ROOT! And it also installs some programs for you.
_____________________________________________________________________
Additional steps for X10a:
Download this:
http://filevo.com/okknxk23pbnr.html
or from here: http://hotfile.com/dl/52357616/84b4027/ROOT_F2v2_X10a.rar.html
Extract it.
Inside the step4 folder, there is a DeviceID.txt file. Remember you've seen this before? Copy the same one from step1 folder that you did in #4, and put it into the step4 folder.
Follow #5 (except with step4.cmd)
Next, turn the phone on (if it doesn't turn on, unplug the USB from the phone, and try turning it on again, then plug the USB back in). Put it in USB debugging mode if it's not (if you forgot how to, look back in #6)
Open step5.cmd
After it's done, press the left button on the the phone, go to Settings>About phone and under Model number it should say X10a
_____________________________________________________________________
Market Fix:
If you have an X10i, follow this: http://forum.xda-developers.com/showthread.php?t=719486
Otherwise if you have an X10a, use this file instead, but follow the same instructions as in the link above: http://rapidshare.com/files/405188255/Market-Fix-X10a.rar
_____________________________________________________________________
To delete preinstalled programs you don't want, such as Moxier:
Put phone in debugging mode if it's not already.
I recommend you unplug USB from phone so you don't end up running some file and messing your phone
Open up the step3 folder. Right-click on cleanup.cmd, and click on edit.
Whatever is there in that list of "@adb shell rm /blah/blah/blah" will get wiped off your phone. So change the list as you want. If you're unsure, REMOVE IT FROM THE LIST!
After you're done making your list of apps to remove, save the file, plug USB into phone, and run the file.
Here is a thread that says what some of the applications are, and additional ones you can add to the list, to remove from the phone: http://forum.xda-developers.com/showthread.php?t=714021
Alternatively, you can install Titanium Backup from the market (it's free!) and use that to uninstall some applications. Also, it's really great for making a backup of your stuff (you can backup more things now since you have access to more things since you now have root!)
_____________________________________________________________________
If you are experiencing difficulties, try reading through this thread, since it may already be answered: http://forum.xda-developers.com/showthread.php?t=711969
Check out this post if you are having troubles; hopefully it can clear up some common problems people may be having: http://forum.xda-developers.com/showpost.php?p=7099515&postcount=1927
I hope this step-by-step guide helps!
Sent from my X10i using XDA App
If you still have problems, try reading a recent thread by Seansmit17.
Thread titled "that was easy"
he seems to have another solution to debranding.
Sent from my X10i using XDA App
xtrmshadow said:
Will it all work perfectly? I mean,will i concur with any problems?
Click to expand...
Click to collapse
Run steps 1-5 HERE, then run SEUS which will update you to R2BA026.
Ah o.o i finally did from here http://forum.xda-developers.com/showthread.php?t=717949&page=22 and worked perfectly for me ,im at last step7 and so far its working great...after this ima update to 026 and done ^^
Thanks for the help people =)
My Phone is working great ^^
And Damn fast now
Ty Again =) Now to wait for update 2.1 :3
xtrmshadow said:
Ah o.o i finally did from here http://forum.xda-developers.com/showthread.php?t=717949&page=22 and worked perfectly for me ,im at last step7 and so far its working great...after this ima update to 026 and done ^^
Click to expand...
Click to collapse
If you'd have stopped at step 5 and run seus you would flash straight to 026, instead of having to flash to 023 and then 026.
I've tried this method
http://www.esato.com/board/viewtopic.php?topic=195467
when I get to step 12 SE's PC Companion just re-downloads the Vodafone files again :'(
still stuck on uk 024 :'(
Same thing happens on the SEUS swap method, it doesn't attempt to download the files as they are already there so I don't get the opportunity to swap :'(
@debs ,that method doesnt work anymore mate,use the one from here : http://forum.xda-developers.com/show...717949&page=22 .
That one works,i just tried it myself.
Regards ^^
PS: Just be careful on the steps,read em carefully before doing anything,you can brick your phone doing that.
Thank you sooooo much XperiaX10iUser and xtrmshadow. Chuffed to bits now I have finally got 026 on. I did it the way you both suggested but only up to part 5, then let SEUS update me to 026.
I'm one happy bunny now
xtyx
I also read something about replacing just one file? I can't find the post anymore and don't remember the filename. I unbranded my phone months ago. But my wife has the same phone from Vodafone, but branded. If someone can tell me the name of the file and whether I can copy mine file to her phone to unbrand it?
olafski72 said:
I also read something about replacing just one file? I can't find the post anymore and don't remember the filename. I unbranded my phone months ago. But my wife has the same phone from Vodafone, but branded. If someone can tell me the name of the file and whether I can copy mine file to her phone to unbrand it?
Click to expand...
Click to collapse
No you can't exactly copy it.
Go to the debrand thread posted on first page and read through carefully then you'll see that the files are copied to a certain folder on your pc. Since you've done it before I'm sure it will come back to you if you simply reread the obstructions.
Edit:Btw the links posted by XperiaX10User and xtrmshadow are actually same post with I copy and pasted on first page. Just so you don't get confused.
Sent from my X10i using XDA App
I found it, I mean the build.prop. What if I replace her build.prop with mine? Would that work?
I know about the SEUS and then during the process replace the files etc. But that is not what I mean ;-)
Thanx again!
olafski72 said:
I found it, I mean the build.prop. What if I replace her build.prop with mine? Would that work?
I know about the SEUS and then during the process replace the files etc. But that is not what I mean ;-)
Thanx again!
Click to expand...
Click to collapse
Sadly I'm not experienced enough on this subject to answer that question, maybe pm jerplea or bin4ry?
Sent from my X10i using XDA App
Dear developers,
I have deleted (by mistake) program Launcer from my Smartphone and now it is not going to load. When I turn on it, there is only symbol of IDEOS. After a minute symbol starting to twinkle, but system not loading.
Could you please tell me how can I return to original firmware?
I hope someone will be able to support me.
If the launcher is the problem, you can just install another, or push again the original from a rom via adb. I assume that the device is rooted(I think you cannot delete a system app if isn´t). If you can connect to pc, then possibly you can install a launcher from huawei' s suite(I´m not sure because I don' t use windows and I haven't try this app) or from a android file manager like QtADB, Android commander or Droid Explorer. You can also install it only with adb via windows command prompt:
http://www.brighthub.com/mobile/google-android/articles/37151.aspx
And maybe, if wifi is enabled and connected, you can just install a launcher from market via pc' s web browser:
https://market.android.com/
The Modaco wiki has a list of original firmwares, but no link to Huawei works anymore. However, it is possible to download the latest China Unicom firmware - which does contain english language support. That should at least get you started.
As a new user I can't post links yet, but it is easy to find if you look for u8800 software, and then switch to Chinese.
Put the extracted directory (dload) on an sd card, in the top/root, put it in the phone and then hold volume down and power on.
Note, this will blow everything away to start from scratch so make sure it is what you want. In addition everything will be in Chinese so you need to be able to navigate to the settings to set it to English.
Better ideas? I am a noob myself so no guarantees...
I have unrooted it before to delete some trial games. And deleted Launcher by mistake.
I can't connect via usb now.
I'm afraid if I upgrade firmware, I have less memory because old one will not be deleted. Or maybe I'm wrong?
No, you're not gonna have less memory.
Did you tried to wipe to factory defaults from recovery mode(power button and vol+)?
You will not have less space because an original firware will format everything from boot partition, system and data... Basically , it will give you original software and status like it came from factory ... Like the other user said, jut find it, extract it , put the dload directory to the root of you sd card and hold volume down and start up the phone ... You will see a progress bar and when it is finished , the phone will restart itself, you will have to wait longer due to the creation of new files and there you go
vladislavnm said:
I have unrooted it before to delete some trial games. And deleted Launcher by mistake.
I can't connect via usb now.
I'm afraid if I upgrade firmware, I have less memory because old one will not be deleted. Or maybe I'm wrong?
Click to expand...
Click to collapse
Install recovery first, then you can connect your device to PC using recovery. If you have friend that have X5, copy the launcher. Else, just install Custom ROM.
The old one will be removed if you install custom ROM. If I'm not wrong.
Recovery.
Unplug USB, turn off your phone, press and hold vol + and -, then press power. Hold those three buttons until it turned on and the screen is purple-pink.
Backup all image data(copy). The rest is in the link.
Sorry for my English. Hope you understand what I write..
dancer_69 said:
No, you're not gonna have less memory.
Did you tried to wipe to factory defaults from recovery mode(power button and vol+)?
Click to expand...
Click to collapse
You are magician. it works now.
hmmm... but there is no launcher application - no workspace available. it doesn't want to load as before. strange.
upgrade don't work too. It is cycle repeating of step1/2.
I just tested and found that you can copy the missing apk from bootloader mode. In this mode(power + vol- + vol+ buttons), when connected to pc via usb cable all partitions of device mounted(at least this happens on linux). So, you can navigate to system partition on /system/app folder and copy there the missing launcher' s apk file. You can find this file on a custom' s rom(or on an official' s rooted rom like modaco's roms) update.zip file. It's on system/app folder. I tested this on linux and I could(not as normal but as root user though) copy or delete files from there.
dancer_69, thank you for your support. At my side when I connect via bootmode, there is only flashdrive is visible.
It's really strange that it is not going to upgrade.
I'm able to apply sdcard:update.zip. So maybe if to put this application inside of the card, it could install. but I don't know how to do it.
I finded apk file and tried to install it but it don't receive file because it hasn't some certificate. ???
I think you have 3 options here.
1. flash an official rom(you put the dload folder of rom's zip file on root of sdcard and boot to bootloader mode. The update starts automatic)
2. Use a linux system(maybe a livecd) to access the other partitions.
3. Try to reroot the device from pc, via superoneclick app(you can find it here), so to have access to system again.
but I haven't access to installation program area. nothing!
I have only ability by pressing (vol + and on) to choose install update.zip from flash card.
so.
1. when I runned new firmware from dload it didn't install. it was cycling at first level (1/2)
2. linux is good idea. but I'm not sure that it's will be profitable. maybe I have turned off access to partitions inside of phone
3. I can't install superoneclick as I'm not able to install any application.
I hope we are closer to some geniously idea. I have bought phone yesterday and we haven't service center in our city. So, I need to buy the other one.
This is not so serious problem, it' s not hardware, it´ software related. And I think you cannot turn off access so easy.
The superoneclick is a pc application. You don't need to install something on device(if I remember well, because I use it once before a long time). You can try it.
And you can try linux too.
I don't think that this is a problem that only service can solve it.
What firmware you tried? Try another one. And better try to find the one that you device has(if you know it)
Thank you for positive opinion.
1. Will try to change firmware as you said. Try 2 more firmware from Huawei.
2. Superoneclick needs approval from phone, today night I wasn't able to run it.
3. I'll try Linux too.
dancer_69 said:
This is not so serious problem, it' s not hardware, it´ software related. And I think you cannot turn off access so easy.
The superoneclick is a pc application. You don't need to install something on device(if I remember well, because I use it once before a long time). You can try it.
And you can try linux too.
I don't think that this is a problem that only service can solve it.
What firmware you tried? Try another one. And better try to find the one that you device has(if you know it)
Click to expand...
Click to collapse
Thank you very much for your excellent support. It's work now after trying of other firmware. Everything is excellent now.
I only noticed that battery is no very capacitive.
Please, send me your paypal account, I want to donate you a little.
I recently got a ZTE Open via ebay UK.
First thing to do is upgrade to 1.1 to get fastboot functionality, unfortunately only one of the two downloads on ztedevices.com for the zte open seems to download to my computer correctly, and that is 2014012010220351.zip which from what i've read is for taking a 1.1 to 1.1 with fastboot enabled.
The other download 2014012010205829.zip which is the one that I think I need takes hours rather than minutes to download, and once downloaded nothing on my PC thinks it is a valid zip archive.
Questions
Has anyone successfully downloaded and used contents of 2014012010205829.zip ? -
link is titled: OPEN(European Standard) SD card upgrading instruction & software package(ebay)-2376270OPEN_EU_DEV_FFOS_V1.1.0B02(for V1.0)
Thanks in advance
r1b2718 said:
I recently got a ZTE Open via ebay UK.
First thing to do is upgrade to 1.1 to get fastboot functionality, unfortunately only one of the two downloads on ztedevices.com for the zte open seems to download to my computer correctly, and that is 2014012010220351.zip which from what i've read is for taking a 1.1 to 1.1 with fastboot enabled.
The other download 2014012010205829.zip which is the one that I think I need takes hours rather than minutes to download, and once downloaded nothing on my PC thinks it is a valid zip archive.
Questions
Has anyone successfully downloaded and used contents of 2014012010205829.zip ? -
link is titled: OPEN(European Standard) SD card upgrading instruction & software package(ebay)-2376270OPEN_EU_DEV_FFOS_V1.1.0B02(for V1.0)
Thanks in advance
Click to expand...
Click to collapse
For me the downloads are dodgy in the sense that sometimes they download within minutes and sometimes they begin downloading with an estimated time of minutes and then indefinitely increase in time. The only fix I've found is trying to download the files again at a later time. I hope this helps, if not, ask someone with knowledge of uploading files to the internet to help you out by downloading and uploading it to somewhere for you
Like the subject says I am having a few problems.
I have a Lumia 950 XL, which I have just acquired.
My first problem is that I have no problem sideloading apps, but if I try to install too many I get this message "unable to install application. the maximum number of deveiloper applications on this phone has been reached. please uninstall a developer application or try again". I think it is letting me install about 10, but won't let me install anymore.
Ok My second problem is that I followed this tutorial on youtube, which I thought might fix my first problem
Seemed like a good tutorial but I had a couple of problems.
I installed Windows Universtal Toll (WUT). CMD Injector and Interop Tools (RC)
The problem was that the CMD Injector just shuts down when I click 'Inject'
Also in the Interop tools I can't turn on Inerop/Cap unlock or New Capability Engine Unlock. It just turns on again.
I hope someone can help me with these problems.
The first problem is the most annoying as I have tons of XAP files I would like to install
regards
Asimov
I have now realised what I did wrong. I followed the wrong tutorial for an x50 phone. Unfortunately I think I have now killed my phone as I ticked the option Restore NDTKSrvc and it won't turn off.
I tried following the following tutorial for doing the vcReg10 but it won't work because of the Restroe NDTKSrv. I think I have done something stupid, and now I can't even see my documents and pictures when I plug in my USB cable. I just see a pile of system files.
Asimov500 said:
I have now realised what I did wrong. I followed the wrong tutorial for an x50 phone. Unfortunately I think I have now killed my phone as I ticked the option Restore NDTKSrvc and it won't turn off.
I tried following the following tutorial for doing the vcReg10 but it won't work because of the Restroe NDTKSrv. I think I have done something stupid, and now I can't even see my documents and pictures when I plug in my USB cable. I just see a pile of system files.
Click to expand...
Click to collapse
Ok I did a complete reset, so the phone is back to square one. Gonna redo the above tutorial before copying everything back to the phone.
Right I got the phone unlocked ok, but there is a but. I followed the above tutorial on how to unlock the phone and everything went fine. So then I downloaded WUT Windows Universal Tool, but here is the problem with it. It download to the download folder. For instance I downloaded TinyVNC, but if I try to install from the phone it don't install. However if I copy it back to my PC and install with WPV XAP deployer it works.
Can you tell me why I can't install straight from my phone?
I can double click and it says install, but it never installs.
Asimov500 said:
Right I got the phone unlocked ok, but there is a but. I followed the above tutorial on how to unlock the phone and everything went fine. So then I downloaded WUT Windows Universal Tool, but here is the problem with it. It download to the download folder. For instance I downloaded TinyVNC, but if I try to install from the phone it don't install. However if I copy it back to my PC and install with WPV XAP deployer it works.
Can you tell me why I can't install straight from my phone?
I can double click and it says install, but it never installs.
Click to expand...
Click to collapse
Perhaps that's because along with the WUT you get a valid certificate (e.g. WUT_1.4.11.0_x64.cer) , which is missing from the phone.