I am still having problems installing most cabs. Only a few are working for some reason? I have searched and searched and can't find any help. Is there an app unlock that will work on my Tmobile HD2? I saw one for the Tilt2 but not sure if it would work on mine. I could use some help this is driving me crazy.
Thanks
I am still having problems installing most cabs. Only a few are working for some reason?
Click to expand...
Click to collapse
I know some cabs require soft reset or even recycle power. Exactly what apps are not working?
Is there an app unlock that will work on my Tmobile HD2?
Click to expand...
Click to collapse
Are you trying to unlock DEMO's? Kindly explain more what does this app do as i am curious what it is? If you are, this forum does not allow it.
I know that some cabs. require a soft reset after installing but my problem is most cabs won't install. The download fine but then say uninstallable. They are good clean cabs like BsB Tweaks and several others from here, also I tried from sites like pocketpc.net and still they won't install. A very few do and one I tried was sdkcerts hoping that maybe I'd get lucky but it didn't help. I'm not trying to install any trials or anything. I don't know what else to do, I have searched and searched and haven't found anything that works yet. I'm not that proficient that I feel comfortable flashing anything yet. I love the phone but not being able to install most things sucks. Tweaking the phone is one of my favorite things, I'll work up to flashing later hopefully. If anyone can help I could sure use it.
@N1M1TZ: I can vouch that amstaff's intentions are legit, we've just been unable to get most any cabs to install for him so far.
@amstaff: I'm honestly believing that with everything else we've tried, it's proabably time to try a hard-reset...I haven't turned up anything else that could address your problem (no app unlock, etc). It's actually a very simple procedure, and has often cleared up odd issues that defy every other attempt. The only downside is that it resets any tweaks etc that you've done since starting, but if you're having trouble installing everything anyway, I'm guessing you haven't been able to make too many changes. You'll just want to back up your contacts (easy), and see if this forces your phone to behave. We'll be happy to help you through the process if you want.
Does your uSD card have a write lock switch? Not sure if the card that came from Tmous had one or not. I am using a C6 card which doesn't happen to have one. Anyway, another thing to check as this can disallow write access to the SD card.
Another thing to try is copying the cab file to internal memory, turning off the phone, removing the SD card then trying to install in internal memory without the SD card in the phone. You can always uninstall it if you wanted it on the card but this should rule out some problems.
Sirphinkee-I went ahead and tried a hard reset, you're right it didn't really matter since I have only been able to install a few things. It still has the same problem.
Decim8-I looked at my card and there is no lock on it. I don't think that would be the problem anyway since it does install a few cabs. That's what I don't understand I can't figure out why it will a couple but so many others it won't? I know the cabs. are legit cabs. and they are from reliable sources and people. It's better than 90% of the cabs. I'd like to install keep saying uninstallable. I tried your suggestion of installing to the phone directly without having the sd card in and still they won't install. Downloading them to card or to hard drive is no problem only the installation.
Has anyone heard of an App Unlock cab. for the T-mobile HD2? I just don't know what else to do, I don't want to flash as I don't know that much yet and I saved for quite a while to get this phone and a HD2 brick would be terrible.
Thanks for the ideas so far guys-
amstaff72 said:
Sirphinkee-I went ahead and tried a hard reset, you're right it didn't really matter since I have only been able to install a few things. It still has the same problem.
Decim8-I looked at my card and there is no lock on it. I don't think that would be the problem anyway since it does install a few cabs. That's what I don't understand I can't figure out why it will a couple but so many others it won't? I know the cabs. are legit cabs. and they are from reliable sources and people. It's better than 90% of the cabs. I'd like to install keep saying uninstallable. I tried your suggestion of installing to the phone directly without having the sd card in and still they won't install. Downloading them to card or to hard drive is no problem only the installation.
Has anyone heard of an App Unlock cab. for the T-mobile HD2? I just don't know what else to do, I don't want to flash as I don't know that much yet and I saved for quite a while to get this phone and a HD2 brick would be terrible.
Thanks for the ideas so far guys-
Click to expand...
Click to collapse
There is no "app unlock" cab. It make no sense that some cabs install and some don't. Are you making sure that they are cabs and not zip files? And you are leaving the cab files together... not un-zipping the cabs? (cab files will look like a rar or zip file on your pc.) All the files you are using are single files ending in .cab, right? And you are copying them over to your device, then launching them from your device?
zarathustrax said:
There is no "app unlock" cab. It make no sense that some cabs install and some don't. Are you making sure that they are cabs and not zip files? And you are leaving the cab files together... not un-zipping the cabs? (cab files will look like a rar or zip file on your pc.) All the files you are using are single files ending in .cab, right? And you are copying them over to your device, then launching them from your device?
Click to expand...
Click to collapse
They aren't zipped. I had a Fuze before this phone and never had a problem like this one. I'm doing the same thing with this HD2 as I did with it. I download to the sdcard, then try to install. I've downloaded to card and tried to install to card, I've downloaded to card and tried to install to device, I've downloaded to device and tried to install to device it's always the same thing.
Amstaff, did you get my PM?
Java Unlock for HD2
I get certificate messages when trying to install unsigned Java apps. Particularly mTorrent. cant be authorized because c=us;o=verisign, inc;ou=class 3 public primary certification is disabled.
Possible solution
The same happened to me when I first got the phone. I found a solution in this. First back up all your data from the SD Card. This is really important as yo will loose everything that's on the card. After, Format the SD Card to Fat 32.
Now import all the cabs to the SD Card and install them.
If for some reason you still cant get the to run try this cab. They are certificates that help overcome the security locks.
I have the same issue. Tried downloading/test a couple of different adroid builds and after a restart found the file "is not singed with a trusted certificate or one of its components cannot be found."
Cab install - solved
Had issues with this previously. Had to do a hard reset with the power + up/down volume buttons at startup.
This corrected the issues with cabs being locked out.
Related
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Another forum member had this same problem when installing the ClearVuePDF Reader also supplied by o2 as part of the HTC application suite. He has the MDA, but flashed with the o2 Exec ROMs and then installed in Corporate mode.
From work we did together, it appears to be just the install program that was not validating his device. When I tried a hard-reset and Corporate mode install, I had no problems installing. However, its beginning to look as though a hard-reset does not totally clear the Exec's memory. In his case, I found all the individual files and registry settings needed for ClearVuePDF to run and he copied those to the device. Runs perfectly for him like that.
So I'm afraid you'll have to find somebody with the o2 version of GPSMonitor installed and get them to determine all the files/locations and registry-settings needed to get it to run. Unfortunately I don't have a GPRS connection or GPRSMonitor installed.
Just a thought. Have you yet tried a full o2 Personal mode install on your device? It just might be this action that puts 'something' in memory that is not cleared by a hard-reset, and that 'something' might be what the install program is looking for.
Sorry that I can't be more helpful.
No problem thanks for your help
dazzled said:
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Click to expand...
Click to collapse
I did a basic install and I get the same error. Sorry, Not much help though.
Daz
Me too. The ClearVuew PDF reader is rubbish! Text misalighed all over - Adobe with pixel doubling is better than this.
Please try this
Could one of you having a problem to install the o2 supplied GPRSMonitor, please try installing the attached .CAB after copying it to your device.
This CAB is extracted from the CD-ROM install program, so hopefully skips the validation stuff. With luck you might be able to get around the failed validation by installing from this CAB.
Note: Even if asked to install to Storage Card, the o2 supplied version (2.3.0 build 600) puts very little there, most goes into device memory. The current version 2.41 from spb will obey the instruction to install to SD-Card, but wasn't reliable when run from there - the monitoring part aborted four times in 10-minutes whilst I was playing with it.
Unfortunately, since I don't have the install problem, I can't test this install out.
It works a treat. Thanks muchly!
Ward said:
It works a treat. Thanks muchly!
Click to expand...
Click to collapse
Am I glad about that - I was in the midst of trying to locate all the files/registry entries needed for a manual install.
Perhaps I can go to bed now! :wink:
I also managed to 'locate' another copy and it works fine, thanks for all the help.
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Tron_Of_Borg said:
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Click to expand...
Click to collapse
Ouch! I didn't realsie it was as bad as that.
The situation is made worse by the backup program I'm using (Sunnysoft Backup Manager) not backing up all the data and settings. Neither does it perform a true restore - just merges the backup with what's there after the hard-reset.
Unfortunately, I'm used to HP's backup applet from the Jornada 928; which performed a total backup/flush restore. Are there any other applets for WM5/universal that really performs a full backup/restore?
Does anyone have this cab please? I have just bought a new O2 exec and am having the same problem with it saying my ROM version is too old!!
sorry ignore that post! Work computer blocked the file out
I am running my XDA EXEC in basic mode. When I tried copying the .cab file to my device and running it from there , still get the problem.
Any suggestions ?
I was running personal mode then switched to basic mode, could this cause the problem.
Thanks for you replies in advance.
Cannot remove GPRS monotr app
I installed this file to test it out om M3000. Unfortuntely I cannot seem to uninstall it now! It doesnt show up in my Program list - How do you uninstall it?
I looked in the \\windows folder and removed all files and shoretcuts I could find, but its still showing up on my 'today' screen with an error.
Any ideas? The registry?
Cheers
rob
Linuxgeek:
I was also getting the ROM version problem installing programs to my SD card on my O2 exec. Since I'd only just added the card and was running the basic installation, I did the following:
1) Hard reset
2) Personal Install
3) Re-install ActiveSync on PC
This did the trick. Thankfully I like the Personal install best anyway, but I don't know if that step was necessary.
Tried it. Still get the problem :-(
My mistake - I managed to install the Clearvue PDF program, not the GPRS monitor program. I'm still getting the ROM version error with the GPRS monitor program, but I've not tried the above download yet.
Anyone got any other ideas to fix this problem.
Shame O2 don't have an update to fix this problem on their website.
I've now tried the CAB posted above by astage and I can confirm it worked for me. Just copy the CAB to your device and then open it to start the install.
hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?
shadows of yesterday said:
hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?
Click to expand...
Click to collapse
can't help you or tell you the reason because you are not giving enough details about what you are trying to install, what is going wrong. How are you trying to install. Exe or .cab files. are you just getting error's during the installation
i tried to install .cab & .exe , but it says install unsuccessful, for example SPB & Battery status
mmmm
On what ?... is the cab on the phone or on the PC ???????
i tried both , but i couldnt
You have the HTC Touch Elf right? No cabs at all are instaling on your phone.
Possibiliites:
1. The cab files are being currupted either while you are downloading them or while you are sending them to your phone. FYI Cab files are to be installed via your phone not PC. Transfer the complete cab to phone and just click it to install - Do Not Unzip it. (A cab file looks like it is a zip file or a rar file wen it is on your PC but don't be fooled. it is a cab and does not need to be unzipped) you will only see a bunch of messy files and will just get confuzed. just place the cab on your phone and tap it with your stylus to initiate install
Exe's are to be installed via your PC to your phone through activsinc. place the exe on your desktop (Or wherever) and connect your phone to your PC using Activsinc. Then click the exe on your desktop and follow installation instructions - NOte you will have to still do some clicking on your phone to allow the installation.
2. you are not installing them properly and therfore follow instructions above.
3. your phone is currupt somehow (I don't see how) Try a hard reset and see if the programs will install after that. if not, you might want to return your phone for warranty (I am assuming you just got this phone and this is the first time you are trying to install something.
4. Maybe you have run out of room on your device to install any more applications (if you have been installing tons of other stuff successfully)
I have never gotten any errors installing cabs or exe's exept for when I was trying to install something that my phone did not support. (Not a valid WM application) or something like that.
Edit: You still are not give us much information - What type of error are you getting - What does your phone show/tell you?
Does it start to install and fail half way through? does it not start at all? does it install and the programs just do not run?
Tell us what program you are trying to install - what error you are getting and when you are getting it. Tell us the method you have used to install it etc....
If you want help you will have to provide us with as much information and detail as you can. Otherwise - Good Luck.
I will check back here regularly to see your response and try to help, but if you don't give us much more detail - no one will be able to help you.
Did you flashed your ROM recently?
it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)
shadows of yesterday said:
it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)
Click to expand...
Click to collapse
I don't know about battery status or wm router but TCPMP is an exe type installation. if you try to install this using your phone by putting the TCPMP installation on your phone and clicking to install, it won't work. You have to put the installation file on your computer, connect your device to your computer through activesinc. then click the TCPMP Installation on your desktop and follow instructions. Make sure you accept installation on your device when your device asks. The others may be the same
i did like that , but nothing changed , same message , install unsuccessful
shadows of yesterday said:
i did like that , but nothing changed , same message , install unsuccessful
Click to expand...
Click to collapse
Are you trying to install to your storage card or to device? Are you certain that you have enough storage space left?
Do you have any problems with Activsinc?
Have you tried downloading another copy of TCPMP - Maybe the copy you have is no good.
yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???
DuelMasterNG said:
Did you flashed your ROM recently?
Click to expand...
Click to collapse
You never answered the above question.
shadows of yesterday said:
yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???
Click to expand...
Click to collapse
I don't know if I can help you with this problem. I have never had any problems installing anything onto my device even when the app wasn't compatible. usually still installed, just wouldn't run. I am still using official stock WM 6.0 rom that came on my device. (have not ever flashed a new ROM or Radio and don't know anything about that. If you did flash a new ROM or radio, that could be what is causing your problems and you may want to examine in the thread where you got your ROM or Radio from for answers or to see if anyone else is having the same difficulties. Perhaps PM the person who cooked the ROM. If you havn't flashed any new ROM or Radio, then maybe you changed something in your registry that you shouldn't have with a registry editor (just a thought - don't know if you have ever done this) or maybe you have an app on your phone that is causing conflict when trying to install other apps. You can always try a hard reset of your device (if you don't mind starting from scratch again customizing your device) and then try installing TCPMP and see if it works right after a hard reset. That would suggest either something was changed in your registry or that another app was causing conflict. Bit of a pain in the a## having to reinstall everything(unless you don't have much installed on your device) and still no guarantee that it will work. Before doing a hard reset, you might want to look into backing up your device. (I don't know anyting about backing up - what program to use or how much it can back up such as setting or such but you might want to check it out. Also make sure you sincronize your device with your computer prior to hard reset so that all your contacts, appointments etc... are up to date that way after a hard reset you can just syncronize your device again and get your contacts and appointments etc... back.
If anyone else has any suggestions here -- Please feel free to jump in. I know that I would be really annoyed not being able to install new apps to my device.
Good luck. I hope this gets figured out for you
Rod
i had the same problem, it was unbelievably frustrating, i had to restore my X1i to factory settings, that fixed the problem.
I think you should follow hotrod101's suggestion and do a hard reset. Its quite likely that your phone has malfunctioned or something. It's probably going to save you a lot of work in the long run. Or turn in your device in one of the HTC service centers as already stated. Don't forget to back all your stuff up first.
Good Luck.
thanx alot
you did not say whether your rom is original or coked as i met some problems with cocked roms in installing arabic based applications that was easily installed before flashing me device
Did you get things figured out - If so please share with the rest what you did to solve your problem, in case others are having similar problems. Did one of our suggestions help or did you find another solution?
same problem on my Touch Pro, seams to be common ... some say that it is due to the fixed number (50 installed programs) on the touch flue ... however, I have no more information of how did they got this result, or what is the registry of this issue???
I hope if someone help on this to avoide us the headache cused by hard reset, just thinking about it make me crazy.
even hard reset is not a solution.
Hi,
I've been trying to install gyrator and got this message so tested several other CABs and now seem to be getting this message on trying to install any CAB - really frustrating
Any ideas what might be causing this?
My Blackstone configuation is all pretty standard with original ROM etc
Any suggestions welcomed!
try reinstalling the cab again, it should say that it will remove previous installed version and will reinstall, BUT it wont proceed with the installation. Now after this, go back to the remove programs section and check if its still there.
Wondering if you found the issue, as i have this happening over 4 or 5 different ROM's, ruled out that its a ROM issue, trying to narrow it down to a 3rd party app, unsucessful so far.
When trying to install ANY cab i get the 'unsucessful installation' error message - including cabs i've already installed. Flash my phone this morning, install apps i wanted to, went to install something else this evening, now getting this message.
I've got Sktools installed and i am able to install cabs via this.
Got that problem too on Xperia X1, can't figure out either what the cause might be. Anyone any ideas?
Found my cause - it was installing Twikini
n1ck75 said:
Found my cause - it was installing Twikini
Click to expand...
Click to collapse
so you can't install apps after installing twikini?
I'm getting the "uninstall unsuccessfu" for almost anything i try to install and do have twikini installed (but i can't remember if it was the last app i've installed).
Also i can't open attachments in my emails, can't download files from PIE and when i go to remove programs (start-settings-system-remove programs) the list is empty...
DId you have to hard reset or did u find away around this?
btw, i'm having these issues on my kaiser.
Finally I found what my problem was, even if I can't understand, why this is a problem.
From time to time, e.g. when I got no USB cable around, I used to send the .cab vie E-Mail to have them on my device. Well, and as a matter of fact, exactly those are the ones, where installation fails.
Copying exactly the same file via USB to storage card ends in everything working fine....
So i flashed a new rom and installed twikini first, everything was ok for a couple of days. But all of a sudden this problem is back.
I know its not the .cab files because they're the same cabs i'm trying to install that i install on almost every rom after i flash them.
I'm thinking its yahoo go.
I am having problems installing cabs on my new HD2 with T-mobile. About 90% of the ones I try just say uninstallable after I save them. I tried to download the BsB tweak cab and same thing. I tried to download .NetCF 3.5 and it won't install either. Can anyone give me an idea, and also is there a place on my phone I can find out what .NetCF I'm running? Do the HD2's already have 3.5 on them? I've done a search on here to try and find answers but nothing yet.
Try a Soft Reset, see if that helps...if not Hard Reset
zoth said:
Try a Soft Reset, see if that helps...if not Hard Reset
Click to expand...
Click to collapse
Hold on, not just yet on the hard-reset...
amstaff, what exactly happens when you try to install CF3.5? Are you trying it from a cab or a desktop installer?
sirphunkee- I'm trying it from a cab. .NetCF keeps saying this is a previous version, that's why I was wondering if I have 3.5 already. I don't know where to look and see. I tried to download a cab off modaco that says which version is running but I can't install that cab. It's one that just says uninstallable.
amstaff72 said:
sirphunkee- I'm trying it from a cab. .NetCF keeps saying this is a previous version, that's why I was wondering if I have 3.5 already. I don't know where to look and see. I tried to download a cab off modaco that says which version is running but I can't install that cab. It's one that just says uninstallable.
Click to expand...
Click to collapse
Yeah you know what, I thought I had to put 3.5 on here when I first got it, but I remember now that it was never needed so I assumed it was already on here.
Whatever is causing your problem, I don't think it's CF3.5, because I never put it on and I have BsB Tweak running just fine, and I've never had installation issues like that. So yeah, I think a hard-reset might be a good place to start, to try to get whatever is interefering with your installs cleared up.
I tried a hard reset and still the same problems. Things download I just can't install most of them. I need some help.
amstaff72 said:
I tried a hard reset and still the same problems. Things download I just can't install most of them. I need some help.
Click to expand...
Click to collapse
Are you saving them to the SD card and running them from there? If so, try one running on the phone instead...just to rule out any issue with the card.
I tried that too. It still wont let me install. Is there some safety thing or something I need to disable? I remember in Vista microsoft made it impossible to delete and download some files, did they do something like that on winmo 6.5? It was like you had to have the administrator rights or something. I don't know what's going on, but customizing a windows phone is one of it"s best attributes, I can't even install any games. I need some help, please!
man...this is a chin scratcher never heard of any thing like this before. maybe it has something to do with the certificates. have you tried installing a free app from the marketplace that came on the phone. im curious if that would work.where are you getting the cabs you are trying to install. try something from freeware pocket pc.net
Yeah, the only apps that should potentially give you issues for insufficient rights when installing are homebrewed ones like those found here...but as long as you have sdkcerts installed even those shouldn't do that. But it sounds like the issue here goes beyond that because you're trying to install things that shouldn't need that anyway
NetCF 3.5
amstaff72 said:
sirphunkee- I'm trying it from a cab. .NetCF keeps saying this is a previous version, that's why I was wondering if I have 3.5 already. I don't know where to look and see. I tried to download a cab off modaco that says which version is running but I can't install that cab. It's one that just says uninstallable.
Click to expand...
Click to collapse
T-Mobile HD2 (US) already has NetCF 3.5 installed.
I have tried cabs from here and from places like pocketpc.net and so many won't install. There are some that do but like I said about 90% don't. What is the sdkcerts or whatever, I don't think I have that do I need it to install some cabs? Please someone give me some Ideas. Thanks for letting me know about NetCF 3.5 I was wondering about that. But again need some ideas for the cabs. Thanks for the help and ideas so far.
I just tried to download and install the sdk certs cab. It downloaded and installed but I still can't install most cabs. I tried BsB tweaks again and it still says "BsB Tweaks uninstallable". Do I need to install the sdk certs somewhere special or can I just install it like normal?
amstaff72 said:
I just tried to download and install the sdk certs cab. It downloaded and installed but I still can't install most cabs. I tried BsB tweaks again and it still says "BsB Tweaks uninstallable". Do I need to install the sdk certs somewhere special or can I just install it like normal?
Click to expand...
Click to collapse
You just install it like normal, it sounds like it went on fine for you....so the problem has to be somewhere else, but I'm really still at a loss on this one. I don't know what other cabs/apps you're trying, but I know BsB installed on mine without a hitch.
Let me ask you this....when you're using file explorer to navigate to a cab you want to install, do you do it in landscape mode? And then, as soon as you click the cab, you filp to portrait? I just remembered that whenever I did that, it killed the install, and I would need to click the cab to run it while in portrait mode. Just a thought.
Is there a place I need to check or something that maybe makes me administrator that could be guest or something right now?
sirphunkee-when I download and install cabs I click the link, it sends me to the save screen, I most of the time save to my card and then install...but I have tried to save to the hard drive and install but it doesn't seem to matter which way I do it. When I save and install, I just leave the phone in the regular position, I don't turn it on its side. Some of the apps I've tried to install as cabs that didn't work are grooveshark for 6.5 from pocketpc.net, BsB Tweaks from here, there was a couple of others I just tried to see if they would work from 1800pocketpc and they didn't work either. Only a few are installing without any problem. Thanks for your help sirphunkee, I appreciate it.
Hi, ( i hope this is the right forum for this or if not can someone please help me or direct me to the right now to resolve this) just wondering if anyone(s) out there that had this problem after they had any of the TMOUS HD2 'Driods' hacks installed on a SD card, had it running for a while, then turn off your phone, try to restart and get this error (this is occuring on both the CLRCAD and HARET programs) "The File 'XXXX" cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem preresist, try reinstalling or restoring this file". i have already formatted and reinstalled the files on the SD card and been to most of the forums here about this issue for their resolution. (all with no luck) If there anyone out there with a simple resoultion (hopefully nothing too complex like a reg hack) can you please help me out with this issue. Thanks in advance
Is haret and the clr cab on the root and the Android files inside the Android folder?
Don't know much more than that. Try a diff winmo Rom I guess.
Sent from my Nexus One using XDA App
All of the files are still in the same directory and tried different ROMs, like i mentioned i had it running well for a while until i shut down the phone. Dont know if the "'Driod' hacks" or some unkown "update" from T-moble had something to do with it...
I have the same problem and I have also tried the same fixes you have I dont know what to do hopefully we can get a solution.
Perhaps try SDA unlocker? It removes the need for .CAB's or .exe's to be signed with a certificate. Either search the forums here or Google for "SDA Unlocker", download it, connect your phone via USB, and run the program to remove the lock.
Doesn't bsb tweats get rid of that. It'll let you run install unsigned cabs.
Sent from my T-Mobile G2 using XDA App
I don't remember, I have always just used SDA unlocker with every device i've ever owned with a stock ROM.
Can yall please shoot me a link to bsb tweats or sda unlocker so I can get this android running again asap thanks
alright this is getting real weird just to give you an update I found sdk certificates and it didnt install I tried restarting and installing it on the sd card and phone memory. I also found bsb tweak and it didnt install. I downloaded .net 3.5 but it said I have and updated version already so I completely dont know what to do all I want is the android to work again. Also just to let you know I have tried other build s of the android just to troubleshoot they all say the same thing now not signed with trusted certificate or one of its components is missing. It seems like tmobile blocked it. I truly need someones helps can you please give me an answer
09099090009090
I'm having the same problem, but only after I switch back to WinMo from Android.
This also is happening to me. I am unable to install any .cabs from the memory card. I installed HD2Tweak earlier and now it gives the same error. I can install from Windows Market.... What gives?