Database Users

Is there a way to view your spl version if bricked?

im wondering because i dunno what version my spl is?
help is appriciated

Hold power, ok button and reset with stylus. This should get you to bootloader which displays your IPL and SPL...

DE ROM

i have upgrade rom
radio version 1.14.25.24
rom 1.59.841.69(48753) WWE
PROTOCOL 52.64.25.34u
TELSTAR
PRPBLEM IS MY SIGNAL POOR.. EVERTIME MY HTC SEARCHING ONLY. MY NETWORK TO ZERO
HELP .. WHAT I CAN DO..

mayong said:
i have upgrade rom
radio version 1.14.25.24
rom 1.59.841.69(48753) WWE
PROTOCOL 52.64.25.34u
TELSTAR
PRPBLEM IS MY SIGNAL POOR.. EVERTIME MY HTC SEARCHING ONLY. MY NETWORK TO ZERO
HELP .. WHAT I CAN DO..
Click to expand...
Click to collapse
Did you follow this guide? You may find your SPL is incompatible with the rom your using. The first thing you need to do is check what your SPL version currently is. To do this you need to enter bootloader by:
Turn it off.
Hold the volume down button while you press the power on button.
You should see a tri-color screen with some text (This is bootloader).

Fallen Spartan said:
Did you follow this guide? You may find your SPL is incompatible with the rom your using. The first thing you need to do is check what your SPL version currently is. To do this you need to enter bootloader by:
Turn it off.
Hold the volume down button while you press the power on button.
You should ee a tri-color screen with some text (This is bootloader).
Click to expand...
Click to collapse
now i do this i get is my spl is 1.54.000 so how

mayong said:
now i do this i get is my spl is 1.54.000 so how
Click to expand...
Click to collapse
Did you use USPL or HSPL to flash rom or radio?

pls help ...please im new i think i mess up

can you please help me out, i follow a tutorial it was very simple to the point but the only i issue i still have is that when i tried to load the rom KUMAR's Leo premium V P1.6 B1.66 SYS23554 following the instructions everything was successful but i get stuck on the initial T mobile screen and it shows the following message
R 2.08.50.08_2
G 15.34.50.07U
D 1. 66. Kumar
but it doesn't advance from that screen... can you please point me on the right direction. I tried connecting the phone to WM sync and the program is not detecting it.

Is it T Mobile usa? if so, then you have flashed an incompatible rom.
tmous (T Mo US) phones will opnly take roms based on 2.10, the rom you have installed is 1.66 (D 1. 66. Kumar)
Kumar has a rom in the Tmo US section based on 2.10, you should use that, not the one in teh normal hd2 section.
With power off, press and hold "volume down", tap the power key and continue to hold vol down until you get the three coloured screen, connect to usb, wait for word 'serial' to become 'usb' and flash a compatible rom.

[Q] Noob needs help!

Hi All,
I have an HTC HD Touch which was running Win 6.1 and I flashed the rom to Win 6.5 found on the Rom thread here. It seemed to work ok and was running for about a day. Since then it turned it self off, and now the screen does not come on. It appears to be on as if you dial it ti will ring, but nothing on the screen.....is there a way to flash it back or have I fried it?
Many thanks in advance

hi, strange behavoir, i've you tried to hard reset the phone? or just enter the bootloader?
To enter in the bootloader
Press and keep pressed "vol dn" then press the power button, you should enter in a red, green, blue, white screen.
If you can enter there and your screen is on, then I think an hard reset is what you need.
WARNING, hard resetting the phone will erase all your data on it, not the SD Card just the phone. Just for be sure, take out the sd card before hard resetting.
To hard reset press and keep pressed "vol up" and "vol dn" key and press the power button. Then follow what's on the screen.
Hope it helps.
bye

What I'd also do is check your SPL. If you've flashed a wm6.5 rom you need to have the correct SPL to match. Did you use HSPL or USPL to flash rom? If HSPL, your SPL should state 1.56.Olinex if not then you need to change your SPL. If you used USPL, your SPL should state 1.54.0000. Again, if not you'll need to change your SPL
Follow this guideline here for flashing roms. The symptoms you are describing could be due to you having wrong SPL. Either way, its easily fixed

htc blac 100 black screen after hard spl

hi
i have used olinex 1.56 hard spl after hard spl phone screen has been black.Phone start but nothing appear on screen i have tried many rom but same thing.Can any one help me please?

Have you tried to revert back to stock ROM?

Reset and press volume up and down button together.

Can you get into the bootloader ?
Do thus Combination " POWER + VOL-DOWN "