I am trying to upgrade to the new 2.1 by means of the .exe file and when the phone tries going into the bootloader, my computer says that the Android 1.0 driver fails to install and the update stops. I am running win 7 pro 64-bit.
I have tried updating drivers, deleting and reinstalling drivers...I am exhausted trying to figure this out. Any ideas?
i would not recommend using that to upgrade, root your phone and then flash one of the custom roms like dc or fresh, i learned the hard way ( i'm stuck on the 2.1)
I am rooted, but when I try to flash a new ROM, I push my volume down button and power button, and when I get the bootscreen, I select the recovery selection, but I then get a screen with a big a phone and a triangle with an explanation mark. What does that mean? I cant get into the recovery.
sandboxlove said:
dont use the ruu
Click to expand...
Click to collapse
What is your suggestion? How do I make the 2.1 upgrade work on my phone...i am far to excited to wait til friday!
matthewgabert said:
I am rooted, but when I try to flash a new ROM, I push my volume down button and power button,
Click to expand...
Click to collapse
It is hold down home and power on phone.
You should have the recovery console and then if you put a ROM on your sdcard there is an option to flash that ROM.
centran said:
It is hold down home and power on phone.
You should have the recovery console and then if you put a ROM on your sdcard there is an option to flash that ROM.
Click to expand...
Click to collapse
Where can I find DamageControl's ROM? That is based on the 2.1 upgrade, right? (And these ROM's work on the SPRINT Hero, right...)
Related
Only tested on SP-FROYO 1.2 with patched Market.
Install rom manager from market. Choose HTC "buzz" aka wildfire when asked and flash recovery. Now choose "boot into recovery" in rom manager.
Amon-Ra´s recovery is now replaced with new recovery.
This is nice
buenso80 said:
Only tested on SP-FROYO 1.2 with patched Market.
Install rom manager from market. Choose HTC "buzz" aka wildfire when asked and flash recovery. Now choose "boot into recovery" in rom manager.
Amon-Ra´s recovery is now replaced with new recovery.
This is nice
Click to expand...
Click to collapse
Hmm, i'm going to give this a try
Rom manager is realy cool
hope it works fine
it's better than normal recovery by Amon-RA?Oo What can I do with that rom?
just tryed on HCDR.ROM v1.5 , work , tryed nandroid , and its back up all thing !vill try later to flash !
Also tried on HCDR.ROM v1.5, flashing worked
I noticed that unless you start recovery via ROM manager, you still get the one you had before
Sent from my HTC Tattoo using XDA App
HCDR.Jacob said:
Also tried on HCDR.ROM v1.5, flashing worked
I noticed that unless you start recovery via ROM manager, you still get the one you had before
Sent from my HTC Tattoo using XDA App
Click to expand...
Click to collapse
hi
whats special about this i did see this on the market
just wanted to know what special or better than what we already have
you can for example scroll down and push down agin to get on top agin. so it scrolls around.
you can flash roms in folders. for example you have a folder structure like this:
SDcard/-install-/roms/Puzzlerom/all_files_related_to_puzzlerom
SDcard/-install-/roms/AnotherROM/all_files_related_to_AnotherROM
You can "start" your flash from android, so you can use your touch screen to chose what rom to flash. Start rom manager and select file to flash. rom manager will ask if you want to backup you rom and if you want to wipe. it will reboot in to recovery and do your choise made in android. for example, do backup, wipe, and then reboot phone to system auto.
This is just a little thing it can do.
danne_jo said:
you can for example scroll down and push down agin to get on top agin. so it scrolls around.
you can flash roms in folders. for example you have a folder structure like this:
SDcard/-install-/roms/Puzzlerom/all_files_related_to_puzzlerom
SDcard/-install-/roms/AnotherROM/all_files_related_to_AnotherROM
You can "start" your flash from android, so you can use your touch screen to chose what rom to flash. Start rom manager and select file to flash. rom manager will ask if you want to backup you rom and if you want to wipe. it will reboot in to recovery and do your choise made in android. for example, do backup, wipe, and then reboot phone to system auto.
This is just a little thing it can do.
Click to expand...
Click to collapse
hi
thanks for the kind explanation ill try its the same thing i see in the market right(it says ROm manager by clockworkMod in the market site) i haven't added any market patch im using Jacobs 1.4 and i can see a rom manger in the market its free its the same thing right
Edit : what i see in the market is not for our phone ie it does not have recovery for our phone it is not listed in recovery images given tattoo or click is not mentioned
haree said:
hi
thanks for the kind explanation ill try its the same thing i see in the market right(it says ROm manager by clockworkMod in the market site) i haven't added any market patch im using Jacobs 1.4 and i can see a rom manger in the market its free its the same thing right
Edit : what i see in the market is not for our phone ie it does not have recovery for our phone it is not listed in recovery images given tattoo or click is not mentioned
Click to expand...
Click to collapse
Select the one for wildfire
Sent from my HTC Tattoo using XDA App
can anyone upload or send me the update.zip i suppose rom manager download to the root of sd-card?
This is a guide to start that recovery manualy (works on desire)
Shutdown phone
Press and hold "volume -(down)"
Press power ON still holding "volume -(down)" pressed.
A white boot meny will load. you can now release "volume -". Wait a few sec for it to load fully.
Use Volume up and down to navigare.
Chose "recovery" and press Power button to chose it.
A image with an red triangle will appear.
Press volume up and power on same time.
A new meny till appear
Use Volume up and down to navigare.
Chose "Apply sdcard:update.zip" and press Power button to chose it.
Now you should be in clockwork recovery
Noticed dident work on tattoo, have diffrent hboot.
You can flash recovery via rom manager. It's the easiest way
danne_jo said:
can anyone upload or send me the update.zip i suppose rom manager download to the root of sd-card?
This is a guide to start that recovery manualy (works on desire)
Shutdown phone
Press and hold "volume -(down)"
Press power ON still holding "volume -(down)" pressed.
A white boot meny will load. you can now release "volume -". Wait a few sec for it to load fully.
Use Volume up and down to navigare.
Chose "recovery" and press Power button to chose it.
A image with an red triangle will appear.
Press volume up and power on same time.
A new meny till appear
Use Volume up and down to navigare.
Chose "Apply sdcard:update.zip" and press Power button to chose it.
Now you should be in clockwork recovery
Noticed dident work on tattoo, have diffrent hboot.
Click to expand...
Click to collapse
Sent from my HTC Desire using Tapatalk
HCDR.Jacob said:
Also tried on HCDR.ROM v1.5, flashing worked
I noticed that unless you start recovery via ROM manager, you still get the one you had before
Sent from my HTC Tattoo using XDA App
Click to expand...
Click to collapse
just select update.zip in amonRa then it will boot up
buenso80 said:
just select update.zip in amonRa then it will boot up
Click to expand...
Click to collapse
I know I noticed that not long after I posted :')
HCDR.Jacob said:
I know I noticed that not long after I posted :')
Click to expand...
Click to collapse
Sorry. But nice you figured it out.
buenso80 said:
Sorry. But nice you figured it out.
Click to expand...
Click to collapse
Haha no need to be sorry for being helpful ;D
I cant enter in recovery mode.Why?
sasans said:
I cant enter in recovery mode.Why?
Click to expand...
Click to collapse
But have you installed the recovery? Can you describe what is your problem?
And please stop spaming everywhere with the same question!
Cheers
Hello there!
I believe I must be doing some stupid mistake, but I have done this over and over and still no success :S
I have rooted my HTC Tattoo (Vodafone PT), installed ROM Manager, selected it as a Wildfire and installed recovery.
All is good there.
Now the problem is when I try to install HCDR v.17 using ROM Manager, I always get a verification failed :/
Any help?
Best regards!
Me too,I have same trouble...
root already by universal androot,then use rom manager and choose wildfire
it shows Successfully downloaded Clockworkmod recovery,but still can't enter
recovery mode,after that...I re-entry rom manager,it shows recovery broken~
My god~what can I do?
My 2.2 OTA failed on my rooted incredible. i got the explanation mark and the little android guy on the front of the screen. i rebooted and im stuck on 2.1. any suggestions?
You either need to un-root and put everything back exactly the way it was, or you need to use a RRU to wipe the phone and put a new system image on it.
I fixed it. Found solution by manually updating update.zip via recovery.
same problem here can you tell me how to get to recovery?
microchip99 said:
same problem here can you tell me how to get to recovery?
Click to expand...
Click to collapse
Power off the phone. Start it back up by holding the power+Volume Down buttons at same time. You'll boot into HBOOT. Wait a few seconds for it to scan your card and do it's thing. Then navigate to the Recovery link by using the volume down button. Hit power to select.
I want to make my vega better but really how no clue! What is nvflash? How to get in recovery mode? I have read the threads but am still struggling.
Will some one plwase help?
I have just done it and installed corvu5 rom just got my vega yesterday. I downloaded modded stock rom from modaco.com then after that i went onto myadventvega.com and downloaded the usb drivers and followed the system update tutorial thats on there and when it asks u to select update click modded stock an thays that ull then have recovery to flash any other rom
Sent from my Desire HD using XDA App
Thank u for your reply.... will give it a go...
Any chance of tge links of what you used mate? I cant find them l.
Modded stock fw - http://android.modaco.com/topic/343205-rom-moddedstock-110/
Usb drivers and guide - http://www.myadventvega.co.uk/
Sent from my Desire HD using XDA App
Thank you. One thng.... it says flash in recovery mode, how do i do that?
Plug the device into the mains, plug the usb cable to pc and device. Open hardware manager on your pc. Then hold the back button for 2 secs, then while still holding the back button hold the power button down for 2 secs, then keep holding the back button for a further 2 secs. In the usb section of your hardware manager a nvidia recovery will show up. The screen on the device will remain black. That is nvidia recovery mode.
My Rom Add-on does not work with the modded sock rom.
original_ganjaman said:
My Rom Add-on does not work with the modded sock rom.
Click to expand...
Click to collapse
So do I need not do it as I have your ROM for now?
Also... what is a nandroid back up and how do you do it?
nandroid backup is part of clockwork mod. It creates a entire back up of your current rom, to restore if a new rom flash goes wrong.
foxguard said:
So do I need not do it as I have your ROM for now?
Click to expand...
Click to collapse
If you want to use my add-on then do not flash the modded stock.
Thanks mate... always very helpful!!
original_ganjaman said:
nandroid backup is part of clockwork mod. It creates a entire back up of your current rom, to restore if a new rom flash goes wrong.
Click to expand...
Click to collapse
How to get into Clockwork recovery once it is installed ?
sumanmighty said:
How to get into Clockwork recovery once it is installed ?
Click to expand...
Click to collapse
1. Press power button, Choose reboot into recovery or something like that.
2. When the screen turns off half way, press power button to turn off the screen completely. Once screen turns off completely, let the power button go. wait for 1, 2 seconds.
3. Then press power button until you see the screen is changed. Once you see the screen changes, let the button go. You should be in the recovery mode.
Most of the people using vega comes from android phone, so they are pretty familiar with the recovery thingy
Hope it works for you.
Cheers
So that is called Clockwork recovery!! thank you, I knew how to do that just didnt realise it was called clockwork recovery!
LOL!
foxguard said:
So that is called Clockwork recovery!! thank you, I knew how to do that just didnt realise it was called clockwork recovery!
Click to expand...
Click to collapse
LOL! at least you got it
i have some issues with a vegacomb 3.2 in a booting into recovery. my device is Viewsonic Viewpad 10s. in first i'm update to bluetooth fixed problem. everything work fine untill i update and get some issues
1.WiFi can't connect at all , all of it. no secure , WPS , PEAP , WPA WPA2
2.can't recovery with CWM or power button
i can't do anything with that all so i try to factory reset and i get it ****ed up .. OTZ
so. i want to reflash to build 7 and update to build 8. can i fix this or my viewpad 10s become a toilet paper now ?
To enter in recovery mode, use RomManager.
puertocastilla said:
To enter in recovery mode, use RomManager.
Click to expand...
Click to collapse
can't use ROM Manager to recovery too. WiFi can't connect and when it appear allow a superuser. a program become idle and didn't do anything
Sounds like a bad flash. I'd reflash modded stock v2, then boot to recovery and wipe user data/cache/dalvik and then reflash the full 8.1 ROM. This should make sure you have a working CWM and probably fix your wifi issue too.
puertocastilla said:
To enter in recovery mode, use RomManager.
Click to expand...
Click to collapse
NO! If you are using VC 3.2 you should avoid using the ROM manager provided recovery as it is for the wrong tablet (g tablet i think) and it WILL soft-brick your Vega.
I've soft bricked my vega using this exact method!
How do I unbrick please?
John
truxntrax said:
I've soft bricked my vega using this exact method!
How do I unbrick please?
John
Click to expand...
Click to collapse
anyone?
How should I enter recovery in VC, with the apk?
I'm using viewcomb btw.
robuser007 said:
anyone?
How should I enter recovery in VC, with the apk?
I'm using viewcomb btw.
Click to expand...
Click to collapse
When you say "soft bricked", what exactly does the tab do when you turn it on??
Best way to recover is to power down tab, attach tab to computer with usb cable. Make sure tab is charged, or plugged in at the time. hold down the back button (top of tab, next to power button), then press and hold the power button for 2 seconds, then release it while you continue to hold the back button another 2 seconds, then release back button. Your screen should flash once quickly, then stay off.
Now, if everything worked, click on the Mod Stock icon on your computer. and after a little time it will start writing files to the tab. If it says device cant be found, you are not in recovery mode, try again the power/back button instructions, it may take a few times before you get tab into recovery.
There are more precise booting into recovery instructions if needed, just Google "rooting Advent tablet"
I'm assuming you already have the usb drivers, and the roms on your computer, and know how to use them.
evophonehome said:
When you say "soft bricked", what exactly does the tab do when you turn it on??
Best way to recover is to power down tab, attach tab to computer with usb cable. Make sure tab is charged, or plugged in at the time. hold down the back button (top of tab, next to power button), then press and hold the power button for 2 seconds, then release it while you continue to hold the back button another 2 seconds, then release back button. Your screen should flash once quickly, then stay off.
Now, if everything worked, click on the Mod Stock icon on your computer. and after a little time it will start writing files to the tab. If it says device cant be found, you are not in recovery mode, try again the power/back button instructions, it may take a few times before you get tab into recovery.
There are more precise booting into recovery instructions if needed, just Google "rooting Advent tablet"
I'm assuming you already have the usb drivers, and the roms on your computer, and know how to use them.
Click to expand...
Click to collapse
This works offcourse, but I want to install VegaICE updates, which needs recovery acces in vegacomb (which is not possible for me).
robuser007 said:
This works offcourse, but I want to install VegaICE updates, which needs recovery acces in vegacomb (which is not possible for me).
Click to expand...
Click to collapse
I have exactly the same issue! I have Vegacomb and wanted to go to HoneyIce as my son can't get skype to work BUT i can't get into Recovery in order to update. Rom Manager just reboots and all i see is the 'Warning about free software' then it just boots into VegaRom.
Would love someone to help if possible?
Thanks in advance
Help me, please!
Yesterday, I wanted to make a clean install for the latest Quarx's CM 10.1 nightly (I've been flashing Quarx's builds for almost a year now, he's The Best), but I think I made a terrible mistake.
When I wanted to make a factory reset, I've got this error because the sd-ext, I understand, that happened because TWRP's structure with almost all devices running Android 4.2.2 have a virtual-sd and a sd-ext, so I decided to make an Advance wipe and I every damn box, even wipe system and wipe sd card.
Finally when I rebooted my phone, TWRP asked to install SU, I pressed yes.
Then when my phone was rebooting, I've got this error:
Bootloader
09.10
Err:A5,70,39,00,27
So, I've been flashing Froyo's .sbfs since yesterday, when I get pass verification from RSDLite and rebooted the phone, it just keep bootlooping, I left it almost 15 minutes and still in Froyo's bootanimation, I know it has to do because it's needed wipe data and cahe, but I can't do that because I can't access stock recovery (volume down+power button), I just get the triangle with the little Android in it.
Here's is the .sbf
JORLA_U3_3.4.2_108-5_SIGNED_USAJORDMR1B25CLALALA022.0R_JORLAFROCLALALA_P027_A018_M016_HWp3_WIG147154_Service1FF.sbf.gz
And I did it with RSDLite 5.6.
Hope you can help me, thanks anyway.
On Stock Recovery press Vol-up+down buttons... Rooting & flashing custom roms & don't know how to enter stock recovery?
turffe said:
On Stock Recovery press Vol-up+down buttons... Rooting & flashing custom roms & don't know how to enter stock recovery?
Click to expand...
Click to collapse
Thank you very much yo solve my problem.
My bad for not knowing how to enter stock recovery.
Bootmenu
turffe said:
On Stock Recovery press Vol-up+down buttons... Rooting & flashing custom roms & don't know how to enter stock recovery?
Click to expand...
Click to collapse
I am new to the Defy, but managed to root and move to CM7 and all seems good. I just wondered if there is a version of bootmenu that uses touch screen rather than volume and power buttons? I thought one of the ICS ROMS had a touch screen recovery, but maybe I am thinking of HTC.
Thanks.
tomlogan1 said:
I am new to the Defy, but managed to root and move to CM7 and all seems good. I just wondered if there is a version of bootmenu that uses touch screen rather than volume and power buttons? I thought one of the ICS ROMS had a touch screen recovery, but maybe I am thinking of HTC.
Thanks.
Click to expand...
Click to collapse
Latest CM10 and CM10.1 have a touch bootmenu, even the latest CM 10.1 has TWRP 2.5 that it's a touch custom recovery.
Bootmenu 2
soyusado said:
Latest CM10 and CM10.1 have a touch bootmenu, even the latest CM 10.1 has TWRP 2.5 that it's a touch custom recovery.
Click to expand...
Click to collapse
Thanks for your reply.
I prefer CWM to TWRP, but is there a way to get the more advanced bootmenu 2 and keep CWM? Sndinitdefy seems to only have the recovery using the volume controls and power button.
Thanks.
tomlogan1 said:
Thanks for your reply.
I prefer CWM to TWRP, but is there a way to get the more advanced bootmenu 2 and keep CWM? Sndinitdefy seems to only have the recovery using the volume controls and power button.
Thanks.
Click to expand...
Click to collapse
I think Quarx merged that bootmenu when he started to make his 2ndboot nightlies for CM10, but I don't know how to install it separately from his .zip files, you should download some of the latest ROMs a see if you could merge the bootmenu to CM7.
where are you download this Froyo's .sbfs?
soyusado said:
Help me, please!
Yesterday, I wanted to make a clean install for the latest Quarx's CM 10.1 nightly (I've been flashing Quarx's builds for almost a year now, he's The Best), but I think I made a terrible mistake.
When I wanted to make a factory reset, I've got this error because the sd-ext, I understand, that happened because TWRP's structure with almost all devices running Android 4.2.2 have a virtual-sd and a sd-ext, so I decided to make an Advance wipe and I every damn box, even wipe system and wipe sd card.
Finally when I rebooted my phone, TWRP asked to install SU, I pressed yes.
Then when my phone was rebooting, I've got this error:
Bootloader
09.10
Err:A5,70,39,00,27
So, I've been flashing Froyo's .sbfs since yesterday, when I get pass verification from RSDLite and rebooted the phone, it just keep bootlooping, I left it almost 15 minutes and still in Froyo's bootanimation, I know it has to do because it's needed wipe data and cahe, but I can't do that because I can't access stock recovery (volume down+power button), I just get the triangle with the little Android in it.
Here's is the .sbf
JORLA_U3_3.4.2_108-5_SIGNED_USAJORDMR1B25CLALALA022.0R_JORLAFROCLALALA_P027_A018_M016_HWp3_WIG147154_Service1FF.sbf.gz
And I did it with RSDLite 5.6.
Hope you can help me, thanks anyway.
Click to expand...
Click to collapse
i do the same step to my defy and now i face the same problem .i think you have salve this problem .but i can't find the this file :JORLA_U3_3.4.2_108-5_SIGNED_USAJORDMR1B25CLALALA022.0R_JORLAFROCLALALA_P027_A018_M016_HWp3_WIG147154_Service1FF.sbf.gz
can you gave me a download adress? i am a chinese and have poor english level ,can you tell me the way you fix your phone step by step? think you !
This thread should help (http://forum.xda-developers.com/showthread.php?t=1216982), in there you'll be able to find everything you need to fix your phone.
First download RSDLite, then search for a sbf suitable for your country.
Then flash it, you need to have Motorola drivers installed and plug the phone on bootloader mode (press volume up+power button), you have to paste the sbf file you extracted in the RSDLite folder, then just execute it and browse the sbf file, finally press flash and wait.
When you read "please start your phone manually" or something like that, disconnect your phone, remove the battery for five seconds then start it on bootloader mode and plug it.
Your phone should boot to Android.
If you get stuck on bootanimation, wipe data and cache from stock recovery (volume down+power button, when you see the triangle press volume volume up+volume down).
Your phone is ready to go now.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
think you so much
soyusado said:
This thread should help (http://forum.xda-developers.com/showthread.php?t=1216982), in there you'll be able to find everything you need to fix your phone.
First download RSDLite, then search for a sbf suitable for your country.
Then flash it, you need to have Motorola drivers installed and plug the phone on bootloader mode (press volume up+power button), you have to paste the sbf file you extracted in the RSDLite folder, then just execute it and browse the sbf file, finally press flash and wait.
When you read "please start your phone manually" or something like that, disconnect your phone, remove the battery for five seconds then start it on bootloader mode and plug it.
Your phone should boot to Android.
If you get stuck on bootanimation, wipe data and cache from stock recovery (volume down+power button, when you see the triangle press volume volume up+volume down).
Your phone is ready to go now.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
thank you,perhaps it will work , but i don't know my defy produced by which country , can i use the other country's sbf ?
Yong-Zhi Lee said:
thank you,perhaps it will work , but i don't know my defy produced by which country , can i use the other country's sbf ?
Click to expand...
Click to collapse
It's not the country your Defy proceeds, you need to know the country for your carrier's signal.