Database Users

Rom manager now works on tattoo

Only tested on SP-FROYO 1.2 with patched Market.
Install rom manager from market. Choose HTC "buzz" aka wildfire when asked and flash recovery. Now choose "boot into recovery" in rom manager.
Amon-Ra´s recovery is now replaced with new recovery.
This is nice

buenso80 said:
Only tested on SP-FROYO 1.2 with patched Market.
Install rom manager from market. Choose HTC "buzz" aka wildfire when asked and flash recovery. Now choose "boot into recovery" in rom manager.
Amon-Ra´s recovery is now replaced with new recovery.
This is nice
Click to expand...
Click to collapse
Hmm, i'm going to give this a try

Rom manager is realy cool
hope it works fine

it's better than normal recovery by Amon-RA?Oo What can I do with that rom?

just tryed on HCDR.ROM v1.5 , work , tryed nandroid , and its back up all thing !vill try later to flash !

Also tried on HCDR.ROM v1.5, flashing worked
I noticed that unless you start recovery via ROM manager, you still get the one you had before
Sent from my HTC Tattoo using XDA App

HCDR.Jacob said:
Also tried on HCDR.ROM v1.5, flashing worked
I noticed that unless you start recovery via ROM manager, you still get the one you had before
Sent from my HTC Tattoo using XDA App
Click to expand...
Click to collapse
hi
whats special about this i did see this on the market
just wanted to know what special or better than what we already have

you can for example scroll down and push down agin to get on top agin. so it scrolls around.
you can flash roms in folders. for example you have a folder structure like this:
SDcard/-install-/roms/Puzzlerom/all_files_related_to_puzzlerom
SDcard/-install-/roms/AnotherROM/all_files_related_to_AnotherROM
You can "start" your flash from android, so you can use your touch screen to chose what rom to flash. Start rom manager and select file to flash. rom manager will ask if you want to backup you rom and if you want to wipe. it will reboot in to recovery and do your choise made in android. for example, do backup, wipe, and then reboot phone to system auto.
This is just a little thing it can do.

danne_jo said:
you can for example scroll down and push down agin to get on top agin. so it scrolls around.
you can flash roms in folders. for example you have a folder structure like this:
SDcard/-install-/roms/Puzzlerom/all_files_related_to_puzzlerom
SDcard/-install-/roms/AnotherROM/all_files_related_to_AnotherROM
You can "start" your flash from android, so you can use your touch screen to chose what rom to flash. Start rom manager and select file to flash. rom manager will ask if you want to backup you rom and if you want to wipe. it will reboot in to recovery and do your choise made in android. for example, do backup, wipe, and then reboot phone to system auto.
This is just a little thing it can do.
Click to expand...
Click to collapse
hi
thanks for the kind explanation ill try its the same thing i see in the market right(it says ROm manager by clockworkMod in the market site) i haven't added any market patch im using Jacobs 1.4 and i can see a rom manger in the market its free its the same thing right
Edit : what i see in the market is not for our phone ie it does not have recovery for our phone it is not listed in recovery images given tattoo or click is not mentioned

haree said:
hi
thanks for the kind explanation ill try its the same thing i see in the market right(it says ROm manager by clockworkMod in the market site) i haven't added any market patch im using Jacobs 1.4 and i can see a rom manger in the market its free its the same thing right
Edit : what i see in the market is not for our phone ie it does not have recovery for our phone it is not listed in recovery images given tattoo or click is not mentioned
Click to expand...
Click to collapse
Select the one for wildfire
Sent from my HTC Tattoo using XDA App

can anyone upload or send me the update.zip i suppose rom manager download to the root of sd-card?
This is a guide to start that recovery manualy (works on desire)
Shutdown phone
Press and hold "volume -(down)"
Press power ON still holding "volume -(down)" pressed.
A white boot meny will load. you can now release "volume -". Wait a few sec for it to load fully.
Use Volume up and down to navigare.
Chose "recovery" and press Power button to chose it.
A image with an red triangle will appear.
Press volume up and power on same time.
A new meny till appear
Use Volume up and down to navigare.
Chose "Apply sdcard:update.zip" and press Power button to chose it.
Now you should be in clockwork recovery
Noticed dident work on tattoo, have diffrent hboot.

You can flash recovery via rom manager. It's the easiest way
danne_jo said:
can anyone upload or send me the update.zip i suppose rom manager download to the root of sd-card?
This is a guide to start that recovery manualy (works on desire)
Shutdown phone
Press and hold "volume -(down)"
Press power ON still holding "volume -(down)" pressed.
A white boot meny will load. you can now release "volume -". Wait a few sec for it to load fully.
Use Volume up and down to navigare.
Chose "recovery" and press Power button to chose it.
A image with an red triangle will appear.
Press volume up and power on same time.
A new meny till appear
Use Volume up and down to navigare.
Chose "Apply sdcard:update.zip" and press Power button to chose it.
Now you should be in clockwork recovery
Noticed dident work on tattoo, have diffrent hboot.
Click to expand...
Click to collapse
Sent from my HTC Desire using Tapatalk

HCDR.Jacob said:
Also tried on HCDR.ROM v1.5, flashing worked
I noticed that unless you start recovery via ROM manager, you still get the one you had before
Sent from my HTC Tattoo using XDA App
Click to expand...
Click to collapse
just select update.zip in amonRa then it will boot up

buenso80 said:
just select update.zip in amonRa then it will boot up
Click to expand...
Click to collapse
I know I noticed that not long after I posted :')

HCDR.Jacob said:
I know I noticed that not long after I posted :')
Click to expand...
Click to collapse
Sorry. But nice you figured it out.

buenso80 said:
Sorry. But nice you figured it out.
Click to expand...
Click to collapse
Haha no need to be sorry for being helpful ;D

I cant enter in recovery mode.Why?

sasans said:
I cant enter in recovery mode.Why?
Click to expand...
Click to collapse
But have you installed the recovery? Can you describe what is your problem?
And please stop spaming everywhere with the same question!
Cheers

Hello there!
I believe I must be doing some stupid mistake, but I have done this over and over and still no success :S
I have rooted my HTC Tattoo (Vodafone PT), installed ROM Manager, selected it as a Wildfire and installed recovery.
All is good there.
Now the problem is when I try to install HCDR v.17 using ROM Manager, I always get a verification failed :/
Any help?
Best regards!

Me too,I have same trouble...
root already by universal androot,then use rom manager and choose wildfire
it shows Successfully downloaded Clockworkmod recovery,but still can't enter
recovery mode,after that...I re-entry rom manager,it shows recovery broken~
My god~what can I do?

[Q] I can't pass through "ClockMod Recovery". I am stuck, PLEASE HELP, I NEED YOU

[Q] I can't pass through "ClockMod Recovery". I am stuck, PLEASE HELP, I NEED YOU
HELLO ALL,
I USED THIS LINK http://forum.xda-developers.com/showthread.php?t=858996
TO ROOT MY MY TOUCH 4G PHONE AND IT WORKED FINE UNTIL I ATTEMPT TO INSTALL OVERCLOCKING SOFTWARE FROM>>>
http://theunlockr.com/2010/12/14/ho...ted-s-off-t-mobile-mytouch-4g-or-t-mobile-g2/
AND AFTER DOING WHAT THEU SAID MY PHONE JUST ACTED CRAZY/
EVERYTIME I TRIED TO TURN THE PHONE ON IT VIBRATES CONTINUESLY AND NEVER GETS TO THE OS. SO I LEFT IT ON FOR NIGHT LIKE THAT AND I WOKE UP IN THE MORNING OBVIOUSLY BETTERY WAS COMPLETLY DRAINED ( AFTER ALL THE VIBRATING BACK AND FORTH)
ANYWAYS, NOW IT JUST TURNS ON AND STAYS AT " MY TOUCH 4G SCREEN WHERE ITS WHITE AND THAT WRITING" IT JUST FREEZES.
IF I TRY TO HOLD VOL DOWN AND CLICK POWER BUTTON, I GET TO THE PAGE WHERE ITS WHITE AND FASTBOOT, RECOVERY, FACTORY RESET,SIMLUCK,IMAGE CRC MENU.
I HAVE TRIED EVERYTHING IN THAT MENU INLUDING FACTORY RESET, NOTTING WORKS.
WHEN I ALSO TRY RECOVERY FROM THERE I CAN GET TO "ClockMod Recovery" BUT I CANT EVEN ACCES INSTALL ZIP FROM SDCARD, WHEN I TRY THAT ALL I SEE IS A BLACK SCREEN AND A HAT AND A BIG EYE UNDER IT.
THIS IS SO FRUSTRATING,

Step one, slow down
step two, turn off the caps.
Step three it's obvious that you have s=off if you have clockwork ROM on your phone.
At the top of your phone What recovery image do you have? 3.0.0.5? or a 2.x one?

thank you for responding, I have v3.0.0.5 version
i have v3.0.0.5 version

ilkercatal said:
i have v3.0.0.5 version
Click to expand...
Click to collapse
as long as you do not have any errors on your recovery image about not being able to mount anything....to get your phone working you can do one of two things.
1)You can flash any Gingerbread based ROM either from Cyanogen(mod) or from TeamRoyal. Those all can be found in our Development section from your recovery image.
2) you can flash the PD15IMG and restore you phone back to 100% via the HBoot (engineering) screen, that can be found in our development section as well.

no luck
I get notting but a black screen with hat and eye under, everytime i try to choose anything from clockworkmod menu.I have adb installed on my pc and it regonizes my device , is there a way to reset the phone from there? maybe?

ilkercatal said:
I get notting but a black screen with hat and eye under, everytime i try to choose anything from clockworkmod menu.I have adb installed on my pc and it regonizes my device , is there a way to reset the phone from there? maybe?
Click to expand...
Click to collapse
Are you usin power botton or track pad to select the options?
Sent from my HTC Glacier using XDA App

You can also check the semi brick thread in here. There is a link to a nice guide to revert back to stock. Exact same issue!
Sent from my HTC Glacier using XDA App

ilkercatal said:
I get notting but a black screen with hat and eye under, everytime i try to choose anything from clockworkmod menu.I have adb installed on my pc and it regonizes my device , is there a way to reset the phone from there? maybe?
Click to expand...
Click to collapse
when you select something you need to select it with the track pad. If you use the power button you'll get the text will disappear.
the only way you can use ADB to flash stuff is if you have the engineering bootloader. If you just followed TheUnlockr's method then you do not have it.

i use volume buttons and power button to select it

oh ok now i used the mouse button select and i can select but now the phone is keep resrarting every like 10 seconds with a vibrate, nottting happens just restarting over and over. Where should I go next?
( remember fartest i can go is the "colockworkmod")

ilkercatal said:
i use volume buttons and power button to select it
Click to expand...
Click to collapse
As he mentioned above, you need to use the trackpad buttons to make selections, NOT the power button.
If you can successfully reboot into recovery, just wipe the phone completely and flash a new ROM...

ilkercatal said:
oh ok now i used the mouse button select and i can select but now the phone is keep resrarting every like 10 seconds with a vibrate, nottting happens just restarting over and over. Where should I go next?
( remember fartest i can go is the "colockworkmod")
Click to expand...
Click to collapse
If you navigate to "advanced" and select it will it give you a new set of options?
if it does try the "mount USB" and plug it into a computer and see if you can surf the SD card via a computer.

KenpoAP said:
Are you usin power botton or track pad to select the options?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
i restored from the back up I created before rooting, It took like 2 minutes and I reboot now I have the screen where its says my touch 4g and just stays there. I think my back up file is no good mabe?>, I alsoe noticed when holding vol down and power but the menu comes after it it says on top" glacier pvt ship s-off" does it mean anything?

TeeJay3800 said:
As he mentioned above, you need to use the trackpad buttons to make selections, NOT the power button.
If you can successfully reboot into recovery, just wipe the phone completely and flash a new ROM...
Click to expand...
Click to collapse
thank you for help but where do you get a new rom and how do you flash it?

ilkercatal said:
i restored from the back up I created before rooting, It took like 2 minutes and I reboot now I have the screen where its says my touch 4g and just stays there. I think my back up file is no good mabe?>, I alsoe noticed when holding vol down and power but the menu comes after it it says on top" glacier pvt ship s-off" does it mean anything?
Click to expand...
Click to collapse
3.0.0.5 is only compatible with 2.3 ROMS.
use this to flash it
http://wiki.cyanogenmod.com/index.p...pdate_Guide#First_Method_.28via_RomManager.29
and you'll want to use the "from recovery" method.

ilkercatal said:
i restored from the back up I created before rooting, It took like 2 minutes and I reboot now I have the screen where its says my touch 4g and just stays there. I think my back up file is no good mabe?>, I alsoe noticed when holding vol down and power but the menu comes after it it says on top" glacier pvt ship s-off" does it mean anything?
Click to expand...
Click to collapse
Your ok! Maybe your bu is2.2 Try any of the 2.3 roms out there and post back!
Sent from my HTC Glacier using XDA App

Isn't there are flashable 3.0.0.6?
Sent from my HTC Glacier using XDA Premium App

I have 3.0 05
But As I was instructed I have downloaded PD151MG file and put it on my sd card and reboot my phone to the engineering menu and right away it asked me if I want to update to PD151Mg file and I clicked yes I guess this new rom will work for me
As of now it is updating.... I will let you guys know later for the result ( I hope I am not doing something even worst )

Mathato said:
Isn't there are flashable 3.0.0.6?
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
There is a flashable 3.0.0.6 image that True_blue Scripted but you have to get into the ROM to do it.
ilkercatal said:
I have 3.0 05
But As I was instructed I have downloaded PD151MG file and put it on my sd card and reboot my phone to the engineering menu and right away it asked me if I want to update to PD151Mg file and I clicked yes I guess this new rom will work for me
As of now it is updating.... I will let you guys know later for the result ( I hope I am not doing something even worst )
Click to expand...
Click to collapse
Once you are done with the PD15IMG you will have to reroot your phone. IT will return it to a 100% stock fashion.
after you re-root the phone please flash the 3.0.0.6 to help save any confusion down the road.

neidlinger said:
There is a flashable 3.0.0.6 image that True_blue Scripted but you have to get into the ROM to do it.
Click to expand...
Click to collapse
The original 3.0.0.6 was made by option94, and you can flash it from your existing recovery or fastboot, so booting into a ROM is not necessary.

[Q] Can't reboot into recovery in VegaComb 3.2 Build 7

i have some issues with a vegacomb 3.2 in a booting into recovery. my device is Viewsonic Viewpad 10s. in first i'm update to bluetooth fixed problem. everything work fine untill i update and get some issues
1.WiFi can't connect at all , all of it. no secure , WPS , PEAP , WPA WPA2
2.can't recovery with CWM or power button
i can't do anything with that all so i try to factory reset and i get it ****ed up .. OTZ
so. i want to reflash to build 7 and update to build 8. can i fix this or my viewpad 10s become a toilet paper now ?

To enter in recovery mode, use RomManager.

puertocastilla said:
To enter in recovery mode, use RomManager.
Click to expand...
Click to collapse
can't use ROM Manager to recovery too. WiFi can't connect and when it appear allow a superuser. a program become idle and didn't do anything

Sounds like a bad flash. I'd reflash modded stock v2, then boot to recovery and wipe user data/cache/dalvik and then reflash the full 8.1 ROM. This should make sure you have a working CWM and probably fix your wifi issue too.
puertocastilla said:
To enter in recovery mode, use RomManager.
Click to expand...
Click to collapse
NO! If you are using VC 3.2 you should avoid using the ROM manager provided recovery as it is for the wrong tablet (g tablet i think) and it WILL soft-brick your Vega.

I've soft bricked my vega using this exact method!
How do I unbrick please?
John

truxntrax said:
I've soft bricked my vega using this exact method!
How do I unbrick please?
John
Click to expand...
Click to collapse
anyone?
How should I enter recovery in VC, with the apk?
I'm using viewcomb btw.

robuser007 said:
anyone?
How should I enter recovery in VC, with the apk?
I'm using viewcomb btw.
Click to expand...
Click to collapse
When you say "soft bricked", what exactly does the tab do when you turn it on??
Best way to recover is to power down tab, attach tab to computer with usb cable. Make sure tab is charged, or plugged in at the time. hold down the back button (top of tab, next to power button), then press and hold the power button for 2 seconds, then release it while you continue to hold the back button another 2 seconds, then release back button. Your screen should flash once quickly, then stay off.
Now, if everything worked, click on the Mod Stock icon on your computer. and after a little time it will start writing files to the tab. If it says device cant be found, you are not in recovery mode, try again the power/back button instructions, it may take a few times before you get tab into recovery.
There are more precise booting into recovery instructions if needed, just Google "rooting Advent tablet"
I'm assuming you already have the usb drivers, and the roms on your computer, and know how to use them.

evophonehome said:
When you say "soft bricked", what exactly does the tab do when you turn it on??
Best way to recover is to power down tab, attach tab to computer with usb cable. Make sure tab is charged, or plugged in at the time. hold down the back button (top of tab, next to power button), then press and hold the power button for 2 seconds, then release it while you continue to hold the back button another 2 seconds, then release back button. Your screen should flash once quickly, then stay off.
Now, if everything worked, click on the Mod Stock icon on your computer. and after a little time it will start writing files to the tab. If it says device cant be found, you are not in recovery mode, try again the power/back button instructions, it may take a few times before you get tab into recovery.
There are more precise booting into recovery instructions if needed, just Google "rooting Advent tablet"
I'm assuming you already have the usb drivers, and the roms on your computer, and know how to use them.
Click to expand...
Click to collapse
This works offcourse, but I want to install VegaICE updates, which needs recovery acces in vegacomb (which is not possible for me).

robuser007 said:
This works offcourse, but I want to install VegaICE updates, which needs recovery acces in vegacomb (which is not possible for me).
Click to expand...
Click to collapse
I have exactly the same issue! I have Vegacomb and wanted to go to HoneyIce as my son can't get skype to work BUT i can't get into Recovery in order to update. Rom Manager just reboots and all i see is the 'Warning about free software' then it just boots into VegaRom.
Would love someone to help if possible?
Thanks in advance

Can't instal CWM

Hi there, I followed this post:
http://forum.xda-developers.com/showthread.php?t=1420728
And Rooting, etc worked fine, but I can't instal CWM or it does not work for some reason... I copied the Recovery.img to the folder but when i restart the phone and hold Vol+ and power the phone simply won't boot.
Can anyone help me?

80 Views and no one can help me?

Download rom manager from market and press reboot recovery.
Sent from my U8800 using Tapatalk 2 Beta-6

Qqqxxxzzz said:
Download rom manager from market and press reboot recovery.
Sent from my U8800 using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
Thank you so much, will try it now.

Hey, i tested Rom manager app and it detects my phone as U8160 instead of U8800, no problem with that?

nerusonu said:
Hey, i tested Rom manager app and it detects my phone as U8160 instead of U8800, no problem with that?
Click to expand...
Click to collapse
It's problem with some roms but just press cancel. Reboot into recovery option doesn't need that. Rom manager detects u8800 only on 32 kernel custom roms.
Sent from my U8800 using Tapatalk 2 Beta-6

This app works too:
https://play.google.com/store/apps/...vbS5zaXJpdXNhcHBsaWNhdGlvbnMucXVpY2tib290Il0.
Sent from my U8800 using Tapatalk 2 Beta-6

Something must be wrong with the recovery files i've been downloading... i used rom manager to reboot in to recovery and the phone simply stays stuck @ Huawei logo... And if i try to power on + Vol+ it won't start at all. You don't have a working Recovery image somewhere by any chance?

Edit...

What firmware you are using?
If it's B522 or newer, do this:
http://forum.xda-developers.com/showthread.php?t=1457490
Now, turn your phone off and take battery out. Hold volume+, volume- and power button. Your phone should now turn into pink screen. connect it to computer via USB. On your computer go disk(phone)>image and replace recovery image with cwm. Don't forget rename new recovery to recovery.img take battery out to turn off phone.
If not working I suggest you re-flash firmware, but I have still one method left if you don't want to do it.
Sent from my U8800 using Tapatalk 2

By what i can see I have this one:
U8800V100R001C00B517G001
I know that it's an old one but all the links are dead or removed for my unfortune.
Gonna try with that method instead, that was the method i used on the previous 2.2 Rom, didn't thought of doing it like that again, just followed the tutorial

nerusonu said:
By what i can see I have this one:
U8800V100R001C00B517G001
I know that it's an old one but all the links are dead or removed for my unfortune.
Gonna try with that method instead, that was the method i used on the previous 2.2 Rom, didn't thought of doing it like that again, just followed the tutorial
Click to expand...
Click to collapse
Hi,
try this:
http://forum.xda-developers.com/showthread.php?t=1546883
and this:
http://forum.xda-developers.com/showthread.php?t=1420728
Hth,
Ponder

Recopy
I'd say re-download and re-copy the recovery.img file using ES File Explorer, check the permissions, and then reboot your phone.
I found that I need to hold down Vol + and power for a few seconds even AFTER the Huawei logo is already showing.
ROM Manager doesn't detect your phone so I wouldn't use that.
Hope this helps

silverlining said:
I'd say re-download and re-copy the recovery.img file using ES File Explorer, check the permissions, and then reboot your phone.
I found that I need to hold down Vol + and power for a few seconds even AFTER the Huawei logo is already showing.
ROM Manager doesn't detect your phone so I wouldn't use that.
Hope this helps
Click to expand...
Click to collapse
I re-downloaded the file from another place(it was bigger than the one I had), and did all the steps again and it's working. The file I had must had something wrong.
Now it's running DZO's Aurora ICS and wow what a difference between both android versions.
Thanks to everyone that helped me.

nerusonu said:
I re-downloaded the file from another place(it was bigger than the one I had), and did all the steps again and it's working. The file I had must had something wrong.
Now it's running DZO's Aurora ICS and wow what a difference between both android versions.
Thanks to everyone that helped me.
Click to expand...
Click to collapse
It's a huge difference! Glad it worked! Enjoy!

nerusonu said:
Hi there, I followed this post:
http://forum.xda-developers.com/showthread.php?t=1420728
And Rooting, etc worked fine, but I can't instal CWM or it does not work for some reason... I copied the Recovery.img to the folder but when i restart the phone and hold Vol+ and power the phone simply won't boot.
Can anyone help me?
Click to expand...
Click to collapse
I had the same problem with mu Huawei U8800 (normal not pro), when I updated to 2.3 back in march this year, what I did, I went back and reinstalled the Beta version that came back in 2011 (v18) as I had saved it on my school computer (you can try and also search on google if there are some huawei beta roms for u8800 still available as I got mine from a past backup), then with that I was able to boot holding the volume + and - keys together with the power button I got the pink screen, and now I was able to copy and replace the CWM 'recovery' image when I connected the USB cable to the computer, Then I removed the cable and when I pressed the power button and the volume button + button i got CWM. To all the developers who came up with this. You are all amazing!

[Recovery]CWM for Samsung Galaxy SIII mini - official

Few days ago an official CWM recovery was made from the ClokworkMod team for our device. Here you can find the link for the site to download or you can download the ROM Manager app from the play store. It's version 6.0.2.7 and it is the latest version.
It's official so don't ask if it work, cos it works.
ClockworkMod website link
Play Store link
This has nothing to do with me, it's not my work, i'm just sharing the info!

thanks how to uninstall cwm?

furuko1231 said:
thanks how to uninstall cwm?
Click to expand...
Click to collapse
Find a backup of original recovery.img for i8190 and put it on your external sd.
Use Terminal emulator with "dd if=/storage/extSdCard/recovery.img of=dev/block/mmcblk0p21" command, and it will be written to your recovery partition.

What different between CWM recovery and original recovery?
Is both support three key combo reboot? Volume up + home + power when phone starting..... or how?
Which is better for usage?

S3miniFin said:
What different between CWM recovery and original recovery?
Is both support three key combo reboot? Volume up + home + power when phone starting..... or how?
Which is better for usage?
Click to expand...
Click to collapse
Cwm recovery allows you to flash .zip files not signed by samsung. And it also has some othet function wich the stock recovery doesnt have.
Sent from my GT-I8190 using xda premium

my old phone (galaxy mini) had bricked by ROM Manager.. any confirmation with this methode? just want to make sure, cz i already bricked my phone with this methode before..

adipradana97 said:
my old phone (galaxy mini) had bricked by ROM Manager.. any confirmation with this methode? just want to make sure, cz i already bricked my phone with this methode before..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2140530
Sent from my GT-I8190 using xda app-developers app

tys0n said:
Find a backup of original recovery.img for i8190 and put it on your external sd.
Use Terminal emulator with "dd if=/storage/extSdCard/recovery.img of=dev/block/mmcblk0p21" command, and it will be written to your recovery partition.
Click to expand...
Click to collapse
Thanks for this, where would I find an original recovery image please?

magickdude said:
Thanks for this, where would I find an original recovery image please?
Click to expand...
Click to collapse
I posted a link HERE.:good:

works great! ^^

tys0n said:
I posted a link HERE.:good:
Click to expand...
Click to collapse
Thank you so much for this, worked perfectly, greatly appreciated my friend.

after rebooting from cwm recovery softbuttons dont work anymore unless i turn off the phone. anyone else?

DocMAX said:
after rebooting from cwm recovery softbuttons dont work anymore unless i turn off the phone. anyone else?
Click to expand...
Click to collapse
I had this issue with all the 4.1.2 roms, it went away when I went back to 4.1.1

AW: [Recovery]CWM for Samsung Galaxy SIII mini - official
DocMAX said:
after rebooting from cwm recovery softbuttons dont work anymore unless i turn off the phone. anyone else?
Click to expand...
Click to collapse
Have the same problem, but wasn't sure if rom problem. After waiting, locking and unlocking they work for me.
Sent from my GT-I8190 using xda app-developers app

DocMAX said:
after rebooting from cwm recovery softbuttons dont work anymore unless i turn off the phone. anyone else?
Click to expand...
Click to collapse
Yes I have this after whatever I do with the recovery, wip, install, clear cache... After boot, I reboot the phone again and it's ok.
Its the same with twrp recovery..
Sent from my GT-I8190 using Tapatalk 2

Same here, usually i have to shut down 2 times to fix it. Just rebooting doesnt help.
Sent from my GT-I8190 using xda premium

i'm install cwm and uninstall tool : http://forum.xda-developers.com/showthread.php?t=2093727 but increasing custom binary count : 1 how to reset ????

You can't reset it not yet.
Why did you even flash it with Odin? You should've asked me to make a flashable zip with stock recovery, like the ones you saw in other CWM topics.
But most importantly, why did you reflash stock recovery in the first place?

I`m not able to access CWM recovery mode by holding down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds . The phone show me a black screen and reboot again , if try again to enter recovery mode I face same reboot , if no key are pressed is just booting normally . Strange is that TWRP recovery is working perfectly with the combination of vol up + menu + power

evilinside said:
I`m not able to access CWM recovery mode by holding down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds . The phone show me a black screen and reboot again , if try again to enter recovery mode I face same reboot , if no key are pressed is just booting normally . Strange is that TWRP recovery is working perfectly with the combination of vol up + menu + power
Click to expand...
Click to collapse
So the 3 button combo works with twrp? If so am gonna try twrp.
Sent from my GT-I8190 using xda premium