Does anyone know a way to get the regular lock screen instead of the Sense lock screen? There are pay apps out there for it, but I want to know if there are ways of doing it other then that.
-------------------------------------
Sent from my HTC Desire
+10 to that, I am looking whole day for this,
I would like to remind people that I've tried almost all of the methots out there and they don't work!!!!....some of them just result in bootloops.
I hope someone can give us a working update.zip or a terminal emulator command
The command:
su
# mount -oremount,rw /dev/block/mtdblock3 /system
# rm system/app/HtcLockScreen.apk
.....is also not working.
It says that there directory is not empty???
So please a little bit of help
Ps. Lockbot pro sucks, it's not the real N1 lockscreen. When you charge the phone you can't see batt percentage.
im looking for a functioning N1 lock screen as well, looked into lockbot pro but decided against getting it for those very same reasons.
anyone know if this would be possible without having a rooted phone? i'd root my phone but im new to this whole android business and scared of bricking it.
@ Hodgy rooting isn't that difficult..... especially if your phone is not branded...
I believe there is also a vid tut out there
cool, well mines t-mobile branded slightly but i doubt that will be a massive problem, will have to sit down one day and try wrap my head around it will have to look out for a vid aswell.
duanes said:
The command:
su
# mount -oremount,rw /dev/block/mtdblock3 /system
# rm system/app/HtcLockScreen.apk
.....is also not working.
Click to expand...
Click to collapse
the commands are working, but you have to do that in recovery mode
kingchris said:
the commands are working, but you have to do that in recovery mode
Click to expand...
Click to collapse
Recovery mode?... you mean via adb??
Did you test it?... and if so, is it ok, or is it the messed up lockscreen?
as shown here:
deanesn said:
Here are screen shots of the broken lockscreen in case some1 is wondering.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BTW the lockbot is cool. I tried it but it kills the one feature that i love in the desire rom. When you unlock it does not show the fancy weather across the screen.
I really want to make the stock lockscreen work. I mean it kinda is lol but not the way i want it. Maybe some1 can help us here. It seems not many devs care about the sense ui rom around this forum.
Click to expand...
Click to collapse
It is possible to simply disable Sense lockscreen xhen "Gesture Lock" is enabled?
It is possible to simply disable Sense lockscreen xhen "Gesture Lock" is enabled?
Click to expand...
Click to collapse
I would prefer that too. Hopefully someone will come up with a solution for us.
-------------------------------------
Sent via the XDA Tapatalk App
the commands are working, but you have to do that in recovery mode
Click to expand...
Click to collapse
Recovery mode?... you mean via adb??
Did you test it?... and if so, is it ok, or is it the messed up lockscreen?
as shown here:
Here are screen shots of the broken lockscreen in case some1 is wondering.
http:[/QUOTE][/QUOTE]
Hey that's my lock screen lol
Here you go guys this worked on MCR desire for the nexus one and the mod was created for the hero and it works on my phone very nice without problem. I'm sure you won't have problems but if you do I'm responsible.
[URL="Http://forum.xda-developers.com/showthread.php?t=668520"]Http://forum.xda-developers.com/showthread.php?t=668520[/URL]
Click to expand...
Click to collapse
Click to expand...
Click to collapse
@Deanesn
Can you be more specific of how you did it?
does anybody know, if it is possible to keep (any) locksreen or ideally screen off, while connected to a Bluetooth headset?
@Deanesn
Can you be more specific of how you did it?
Click to expand...
Click to collapse
Download the vanilla lock screen and push it to your phone. The file is just services.jar which goes to /system/framework/ after you've pushed it go back to /system/apps/ and delete the htclockscreen.apk and reboot.
Just apply this update zip through recovery and then the Vanilla lock screen replaces the sense one.
httz://link.geekfor.me/vanillalock2
Change the z to p above
Credits go to flipz for the hero fix.
It works fine with Desire, just tested it myself.
Just make sure you use the stock clock and not the HTC clock for setting alarms...or you won't be able to turn them off.
7pellc said:
Just apply this update zip through recovery and then the Vanilla lock screen replaces the sense one.
httz://link.geekfor.me/vanillalock2
Change the z to p above
Credits go to flipz for the hero fix.
It works fine with Desire, just tested it myself.
Just make sure you use the stock clock and not the HTC clock for setting alarms...or you won't be able to turn them off.
Click to expand...
Click to collapse
How does this work with the music player? If have some music playing, do the controls show up on the lockscreen, or do I have to unlock it in order to pause/change track/whatever?
7pellc said:
Just apply this update zip through recovery and then the Vanilla lock screen replaces the sense one.
httz://link.geekfor.me/vanillalock2
Change the z to p above
Credits go to flipz for the hero fix.
It works fine with Desire, just tested it myself.
Just make sure you use the stock clock and not the HTC clock for setting alarms...or you won't be able to turn them off.
Click to expand...
Click to collapse
works perfectly thanks!
Is there any way to have this working with the sliders and text going in the correct direction? (horizontally rather than vertically)
-------------------------------------
Sent via the XDA Tapatalk App
Mastoid said:
Is there any way to have this working with the sliders and text going in the correct direction? (horizontally rather than vertically)
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Yes, its in my post and also 7pellc's?
When i apply this zip file via recovery and then reboot, it shows it as what you referred to as the "broken" display. To get it to appear as normal, i take it i have to first run the commands via adb then?
Edit: from my understanding, i am to first install the zip via recovery, reboot, and then remove the htclockscreen.apk while running adb?
Thanks for your reply btw.
Another Edit: I think the reason for why this is not working for me is because the custom ROM i'm running from Paul includes an Odexed apps folder. When I do an ls in system/app, I cannot locate an htclockscreen.apk file to delete. But, when I do an ls in system/framework, it lists a htclockscreen.odex file.
Could this be the issue why the zip file is not working for me and all I get is the broken lockscreen? I have already contacted another member about this and he thinks this could be the problem.
-------------------------------------
Sent via the XDA Tapatalk App
I'm not to sure about the music player, haven't tried it myself. Im guessing that you'll have to open the lock screen then disable the music but it might work. With regards to the oxidised files, yes that could be the problem. However no you don't need to run any adb commands, just flash the zip and it'll replace the old lockscreen. Try payes Rom or mcr 3, there both de odex ed
Related
HERO-MAX/THEMED
Use with Latest basefiles from vogue-hero
ALL credits go to ZENULATOR, MAXISMA, GODZSON and DRIZZY
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WHAT WORKS:
SMS
DATA
PHONE-(RESPONSIVENESS IS BETTER
THIS BUILD IS FAST!!!
KNOWN ISSUES:
USE MEDIA SCANNER (THE FIRST TIME)
Blank Data.img(Requested not needed)
V1.0
based off of zens hero nano theme elements from maxisma
systemv1.0.sqsh
V1.1
no longer based off of zen's nano-hero
alot faster
added new lockscreen background by (GODZSON)
added advanced task killer free
added better terminal
fixed media reading problem
systemv1.1.sqsh
V1.2
new base (yes...even faster)
killed the woodgrain...
red themed now
faster rosie
new lockscreen (by GODZSON)
systemv1.2.sqsh
V1.3
new base (magic-sensui "its magical lol") thanks zen
themed red
phone prioritizer
astro
better terminal
adv. task killer free
http://vogue-hero.googlecode.com/files/systemv13.sqsh
V1.4
new base zen-magic Taiwan release
added weather widget from xROM Builds
PULLED DUE TO INCOMPATIBILITY ISSUES WILL BE UP SOON
+++++++++++++++++++++++++++++
=============================
+++++++++++++++++++++++++++++
Build-Script
Linux Only!
******************
!!!THIS IS SEPARATE FROM ROM!!!
-------------------------
Will only change the system folder YOU modified into system.sqsh
It is a pretty simple straight forward script that does what is says. First click on script and then click display, then on the first line put the dir of the ported system folder: like so
1
example
Code:
cd /home/jamezelle/desktop/hero
next on the second to last line
2
Code:
#put your login name after chown
sudo chown jamezelle ./system.sqsh
ie jamezelle
3
Make sure you use Run in terminal
if not root terminal will ask for password, dont worrry it doesnt save it or anything
ver 2
now tells you what its doing!!!! also will atempt to make directory /mnt/system if not already created
Does anyone find the Build-Script useful??
Disclaimer: i am not responsible for anything if you use this!
but it does save time !!!!!!!!!
If it doesnt execute, right click>properties>permissions tab>check 'allow executing file as program'
I Hope this helps some of you
My first released rom is up! fast and stable thanks zen, maxisma and drizzy
i was looking at that the other day. looks nice.
I'm confused about the whole build-script thing. I'm supposed to download your system.sqsh, extract it, run your build script on it which will convert it to ext2, then back to squashfs again?
Or have you just included the build script as a completely separate tool that we don't actually need to run on your system.sqsh?
craig0r said:
I'm confused about the whole build-script thing. I'm supposed to download your system.sqsh, extract it, run your build script on it which will convert it to ext2, then back to squashfs again?
Or have you just included the build script as a completely separate tool that we don't actually need to run on your system.sqsh?
Click to expand...
Click to collapse
sorry for the confusion, the build-script was a tool that i put up last night to save people time building system.sqsh files.
the rom is seperate use it as normal with basefiles-20090919
Congratulations!!!
i'll give it a try
thanks Jamezelle! Will give it a go...
So wait, this is a flashable Android ROM? or do you mean it's just your own system build
cointelbro said:
So wait, this is a flashable Android ROM? or do you mean it's just your own system build
Click to expand...
Click to collapse
just my own build, i wish i could flash it
How long should it take to boot? Do I need a blank data image for it to run properly. Currently I am waiting for it to get past the htc logo screen. Its been there for 10 mins.
wdbanks said:
How long should it take to boot? Do I need a blank data image for it to run properly. Currently I am waiting for it to get past the htc logo screen. Its been there for 10 mins.
Click to expand...
Click to collapse
i'm also having the same problem i tried changin the resolution to 320x480 still no luck.
n1co35 said:
i'm also having the same problem i tried changin the resolution to 320x480 still no luck.
Click to expand...
Click to collapse
It takes a while to start up but it does go through using 320x480... really nice looking ROM... although I still have the same issues I had with the other Hero ROM's - 3+ rings before the phone actually rings.
Yeah it took about 15 mins to boot up...no data img needed. Looks GREAT and everything works very well. Smooth and quick. Easily on of my favs. Good work. Thanks!
i see i'll give it another try again then. thx.
wdbanks said:
How long should it take to boot? Do I need a blank data image for it to run properly. Currently I am waiting for it to get past the htc logo screen. Its been there for 10 mins.
Click to expand...
Click to collapse
its odexing the apks(optimizing) i noticed if you keep it awake it goes quicker
plemen said:
It takes a while to start up but it does go through using 320x480... really nice looking ROM... although I still have the same issues I had with the other Hero ROM's - 3+ rings before the phone actually rings.
Click to expand...
Click to collapse
im working on that that is also my biggest pet peeve
am new on this i dont really get it how am i supose to make this thing work on the phone :S
magicalan said:
am new on this i dont really get it how am i supose to make this thing work on the phone :S
Click to expand...
Click to collapse
1download the basefiles files
2extract them to root of your sdcard
3download the rom from the link
4rename it to system.sqsh
5download haret
6download default.txt attatched below place at root of sdcard
7run haret
hey man, good job for your first build! Keep on working, we need more dev's around here these days.
hit me up if you ever have any questions about porting/theming.
can some one post up a clean data.img file. please, for some reason i'm stuck on the boot logo. i waited for about 25 minutes and its still just there.
Mods to delete please
Nexus One boot animation
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android Scribble 1 by GLa'DOS
Android Scribble 2 by GLa'DOS
Android Scribble 3 by GLa'DOS
Android-Nexus One Animation
Ubuntu Animation
BIOS Animation
Android pissing on Apple
Android pissing on apple 2
Special Fractal Animation by JohanDeBock
Boot Animation Deception
**POST NO. 117**
Click image to download, Size = 200KB
**POST NO. 118**
**POST NO. 119**
**Smallest to date, Size = 41.29KB**
Just installed the BIOS animation, nice one!
Just installed the pissing android Post 37. Just wondering though why it only show the part where the android get the stick and whack the apple??? but it doesnt show the pissing??
kuailan said:
Just installed the pissing android Post 37. Just wondering though why it only show the part where the android get the stick and whack the apple??? but it doesnt show the pissing??
Click to expand...
Click to collapse
You may want to re-download then, because your the first person out of 337 downloads, to say its not working.
potter1984 said:
You may want to re-download then, because your the first person out of 337 downloads, to say its not working.
Click to expand...
Click to collapse
I also tried the pissing one, but unfortunally i have the same issue with the pissing android. It only shows me the beating of mister apple
Re: [PRJ] All Boot Animations for HTC Desire
You may want to re-download then, because your the first person out of 337 downloads, to say its not working.
Click to expand...
Click to collapse
I also tried the pissing one, but unfortunally i have the same issue with the pissing android. It only shows me the beating of mister apple
Click to expand...
Click to collapse
Hmm... just you 2?
When I get home I will investigate for you. Weird tho. Just checking but you both have desires? And bootanimation is in /data/local?
Stupid questions, I know but have to check these things.
EDIT: Ok, I have downloaded the file, and can confirm it works and works well, the file structure is unchanged and the bootanimation works absolutely fine on my and my cousins device..
So im not really sure what to advise??, You both have root?, I know tell me how you are both installing these animations? (exactly please).
potter1984 said:
Hmm... just you 2?
When I get home I will investigate for you. Weird tho. Just checking but you both have desires? And bootanimation is in /data/local?
Stupid questions, I know but have to check these things.
EDIT: Ok, I have downloaded the file, and can confirm it works and works well, the file structure is unchanged and the bootanimation works absolutely fine on my and my cousins device..
So im not really sure what to advise??, You both have root?, I know tell me how you are both installing these animations? (exactly please).
Click to expand...
Click to collapse
Thanks for testing, i have root with DeFrost 9b. I have to put the bootanimations in 2 directories before they will work(/data/local, /system/media)
The thing is, when i boot my Desire, it first shows me the default white screen with the green htc letters. This takes about 5 till 10 seconds before the bootanimation jumps in.
So my guess is that the bootanimation could work if there's some way to remove the green/white htc logo from my phone.
Any chance you could do a version of the Matrix one without the green "loading" text? IMHO it is completely ruined by that.
Re: [PRJ] All Boot Animations for HTC Desire
Any chance you could do a version of the Matrix one without the green "loading" text? IMHO it is completely ruined by that.
Click to expand...
Click to collapse
Lucky I think I can as I still have the original saved give me till tomorrow, and it will be done
Re: [PRJ] All Boot Animations for HTC Desire
Hmm... just you 2?
When I get home I will investigate for you. Weird tho. Just checking but you both have desires? And bootanimation is in /data/lo
Click to expand...
Click to collapse
Thanks for testing, i have root with DeFrost 9b. I have to put the bootanimations in 2 directories before they will work(/data/local, /system/media)
The thing is, when i boot my Desire, it first shows me the default white screen with the green htc letters. This takes about 5 till 10 seconds before the bootanimation jumps in.
So my guess is that the bootanimation could work if there's some way to remove the green/white htc logo from my phone.
Click to expand...
Click to collapse
Only problem is every device still has the white HTC at start it cannot be removed, or so I have read on various posts.
potter1984 said:
Only problem is every device still has the white HTC at start it cannot be removed, or so I have read on various posts.
Click to expand...
Click to collapse
Ok, then i still have no idea why it doesn't work here.
Is it possible to create one without the beating of apple, and only the one pissing on it?
I really appreciate that if you can.
Ha, was thinking exactly the same thing, I wanted only the peeing on apple loop, not the beating ... so here it is =)
Abomb said:
Ha, was thinking exactly the same thing, I wanted only the peeing on apple loop, not the beating ... so here it is =)
Click to expand...
Click to collapse
It's working! thanks for your time.
Abomb said:
Ha, was thinking exactly the same thing, I wanted only the peeing on apple loop, not the beating ... so here it is =)
Click to expand...
Click to collapse
Can you make a gif image of it, so that I can post it in first post
Hi guys!
Have followed the guide in this forum and now i have defrost 9b.
Trying to get a bootanimation replacement, copied the file bootanimation.zip to the root of the device and followed the guide that states:
How to change boot animation
You need to have HTC Sync installed
Copy bootanimation.zip to SD Card
Turn off Desire and then turn it on while holding back button to enter bootloader(white screen)
Once in "white screen" press power button again to enter bootloader
Connect Desire with PC
Press Volume Down and than Power to enter Recovery
Open Command prompt/Terminal and type
Code:
adb shell mount /system
adb push C:\bootanimation.zip /data/local
adb reboot
Unplug your HTC and enjoy your new boot animation
"adb shell mount /system" does not work....
What am i doing wrong?!?
Appologies for my nubiness.
nvivas said:
Hi guys!
Have followed the guide in this forum and now i have defrost 9b.
Trying to get a bootanimation replacement, copied the file bootanimation.zip to the root of the device and followed the guide that states:
How to change boot animation
You need to have HTC Sync installed
Copy bootanimation.zip to SD Card
Turn off Desire and then turn it on while holding back button to enter bootloader(white screen)
Once in "white screen" press power button again to enter bootloader
Connect Desire with PC
Press Volume Down and than Power to enter Recovery
Open Command prompt/Terminal and type
Code:
adb shell mount /system
adb push C:\bootanimation.zip /data/local
adb reboot
Unplug your HTC and enjoy your new boot animation
"adb shell mount /system" does not work....
What am i doing wrong?!?
Appologies for my nubiness.
Click to expand...
Click to collapse
Have you done "abd devices" to check the phone is being picked up properly?
if not make sure you can see you phone first (in the pc)
Ok.
with adb devices i get:
List of devices attached
HT04APL07804 recovery
if i do adb shell mount /system
i get the message:
- exec '/system/bin/sh' failde: No such file or directory (2) -
What did i do wrong?
potter1984 said:
You may want to re-download then, because your the first person out of 337 downloads, to say its not working.
Click to expand...
Click to collapse
I am not saying it's not working....just the animation where the android pissing is not showing??
Anyway, for your question, yes, I have root, and I am running Amer Bravo V3. I am using the r5 method. And yes I am using Desire just like stated in my signature.
This is a total noob question, so feel free to hit me.
I really like this Phone.apk from the N1. It works just fine on my phone, but when you bring up the dialpad in a call, the last row is slightly covered up (it was obviously designed for a higher resolution phone). It's not a huge deal, because you can still press the buttons. I was going to fix it with apktool but simply resigning the file causes it not to work anymore. Does anyone know how to fix this? I didn't think files in system/app needed to be signed.
hey i know this doesnt answer your question,
but i was able use the youtube.apk from the Evo on my unrooted eris
how come i cant use this on my phone as well?
it just says, application not installed
I guess the answer to my question is this is just a plain system file which is open source so I should not need apktool. Since it was so different, I thought it was custom.
To answer the previous post, you cant install this file. It has to be pushed or flashed since it requires replacing the original system file which requires root access.
I can look into resizing some things for you, but I'm wondering, how did you get this to work on your phone?
I pushed it to system/app and it worked when I made a cal, but as soon as i got a call, it fc'd and I lost my signal.
I can look into resizing some things for you, but I'm wondering, how did you get this to work on your phone?
I pushed it to system/app and it worked when I made a cal, but as soon as i got a call, it fc'd and I lost my signal.
It works great on CE. No problems. I'm only running 1.0 right now, though.
EDIT: Chevelle1768 found a working copy with the buttons correctly spaced in darchstar's Darchdroid v2.6.5. It works awesome. I pushed both Phone.apk and Contacts.apk to my phone. Just don't do it while your phone is actually on. Flash it in recovery. IMO, it's a much better dialer than the other stock one. Don't try this with Sense, though. I'm not sure what would happen.
ihtfp69 said:
It works great on CE. No problems. I'm only running 1.0 right now, though.
EDIT: Chevelle1768 found a working copy with the buttons correctly spaced in darchstar's Darchdroid v2.6.5. It works awesome. I pushed both Phone.apk and Contacts.apk to my phone. Just don't do it while your phone is actually on. Flash it in recovery. IMO, it's a much better dialer than the other stock one. Don't try this with Sense, though. I'm not sure what would happen.
Click to expand...
Click to collapse
hmmm... I pushed the phone and contacts apk as as soon a s I did my signal went dead. Even if I try *228 I get an error : "Not Registered on a Network"
I'm running Senseless 1.0
Phone.apk is not what you think it is. It is not the dialer.
Well, ok, it handles the in call experience. Contacts.apk I think is what actually contains the dialer. In any event, the interface that this Phone.apk file has is better. Instead of having to tap your menu key to bring up in call actions (ie. mute, bluetooth, end call, add call, etc ...) all of the options are right there on the screen already. It even has a button to show/hide the dialpad. And the dialpad does not just spring up like the app drawer, it appears on the screen above the buttons.
I'm not sure which ROMs this will work on, but it definitely works on CE. It may work on other Cyanogen based ROMs as well.
Here is a screen shot in case anyone is wondering.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ihtfp69 said:
I guess the answer to my question is this is just a plain system file which is open source so I should not need apktool. Since it was so different, I thought it was custom.
To answer the previous post, you cant install this file. It has to be pushed or flashed since it requires replacing the original system file which requires root access.
Click to expand...
Click to collapse
yes but how come i was able to overwrite the youtube app on my phone then?
If you're not rooted, that means you have Sense which this does not work with anyhow. If you somehow managed to install this without root, you would brick your phone for sure.
I want that dialer on my Eris!!! I've been searching for a way to do this for weeks but have come up empty. Will this work on Evil Eris since it has some Sense components still?
So which file did you install that was spaced correctly, can you link to it? Can you also post the contacts .apk? Also, Can you please tell me how to "push" it to the phone, is that the same as flashing?
Sorry for n00b questions but I'm desperate for this dialer!!!
I want that dialer on my Eris!!! I've been searching for a way to do this for weeks but have come up empty. Will this work on Evil Eris since it has some Sense components still?
So which file did you install that was spaced correctly, can you link to it? Can you also post the contacts .apk? Also, Can you please tell me how to "push" it to the phone, is that the same as flashing?
Sorry for n00b questions but I'm desperate for this dialer!!!
Click to expand...
Click to collapse
Check my third post. There is a link to Darchdroid. This looks like it only works on Cyanogen based ROMs.
Do this in recovery so your phone does not have a fit.
Code:
adb remount
adb push Phone.apk /sdcard/Phone.apk
adb shell
# mv /system/app/Phone.apk /system/app/Phone.bak
# cp /sdcard/Phone.apk /system/app/
# reboot
here i present the windows phone 7 boot animation.....
android engraved:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
watch the boot animation here: normal and with dots{WVGA}
{QVGA}:
it plays just like windows phone7 but repeats it over and over..
its for hdpi and ldpi devices...
for wvga screens: 1. normal: View attachment bootanimation2.zip
2. with dots: http://db.tt/NHDJong
for qvga screens: View attachment 655882
how to apply?:::::
option1: place it to data/local via root explorer and give all permissions(if s-off) and reboot
option 2: place to data/local via adb:
Installing custom boot animations (Credit to jcase from XDA):
Windows:
1.) Download the desired animation, rename the zip file to "bootanimation" and move into your Android SDK/Tools folder.
2.) Run the following adb command to push the animation into the proper place:
Code:
adb push bootanimation.zip /data/local/
3.) Enjoy!
Mac: (Thanks to Pitamakan)
1. Open a Terminal window, and run the following command. (This is assuming you installed the SDK in your Applications folder.) Replace "username" with the correct user name for your machine:
/Users/username/Applications/android-sdk-mac_86/tools/adb
You should get a screenful of command syntax in response, which will confirm to you that adb is running and ready to go.
2. Put the bootanimation.zip file into the same folder that contains the adb file, and then run the following, again changing the username as needed.
Code:
/Users/username/Applications/android-sdk-mac_86/tools/adb push /Users/username/Applications/android-sdk-mac_86/tools/bootanimation.zip /data/local/
And that should do it!
---------------------------------------------
Reverting back to default boot animation
1.) Open an ADB Shell using:
Code:
adb shell
2.) Remove bootanimation.zip from /data/local using:
Code:
rm /data/local/bootanimation.zip
3.) On next boot you'll have the red VZW animation back.
loving it... its great..
was expecting it since months....
and its here.........
it would be nice to see for mdpi also
how about this???? (watch the dots below)
Why the f* would anyone want that? I had to doublecheck the top of my browser to make sure it DID say "Android".
Apart from that, well job on the graphics.
Ace3 said:
Why the f* would anyone want that? I had to doublecheck the top of my browser to make sure it DID say "Android".
Apart from that, well job on the graphics.
Click to expand...
Click to collapse
well for the question : why anyone would want that??
answer: for the same reason some people want wp7 style music player,home,sms, lock and others, iphone style homescreen and boot animations and others..
its about customizability...
i am proud of android that i can make it look like iphone, htc sense, wp7 whatever i want.....
well android engraved.. wp7 boot animation is also coming soon
new android engraved::::
Ace3 said:
Why the f* would anyone want that? I had to doublecheck the top of my browser to make sure it DID say "Android".
Apart from that, well job on the graphics.
Click to expand...
Click to collapse
Agreed. I don't get it. That's like buying a Jaguar and putting a VW emblem on it instead. Weird.
old_dude said:
Agreed. I don't get it. That's like buying a Jaguar and putting a VW emblem on it instead. Weird.
Click to expand...
Click to collapse
No, that's like buying an Escalade and putting spinners and subs in it. Still the same phone, just customized for what people want. WP7 has a fantastic UI in my opinion and many others' so a lot of people like to have things that are like it.
Why are you guys complaining anyways, if you like it then download it and use it, if not then don't and don't waste the thread with posts *****ing about it. Nobody is making you use it.
Sent from my MIUI SCH-i500
Thank you very much!! It totally fits with my WP7 style ROM for my LG Optimus Black.
Gosh damn I love this.
Ace3 said:
Why the f* would anyone want that? I had to doublecheck the top of my browser to make sure it DID say "Android".
Apart from that, well job on the graphics.
Click to expand...
Click to collapse
Agreed... But a phone with with WP7's UI and Android functionality would be beyond words.
Sent from my HD7 using XDA Windows Phone 7 App
The time looking for it.
Finally WP7 interface with more functionality from Android
Thanks man!
I've made some corrections in bootanimation file (with dots) - now there is looping of dots: "Windows Phone" appears once, and after this moving only dots.
Here is download link: http://goo.gl/VPnjH
Sorry for my bad english
screw the haters i think its great!
I haven't delved into boot animations yet, so forgive me if this question is noobish... would it be very difficult to take one of your boot animations, decompile, modify, and recompile to work on mdpi? I'm not asking you to do it, but just if it's possible to do with an already created animation. Thanks.
*Great work. btw
vertig said:
I haven't delved into boot animations yet, so forgive me if this question is noobish... would it be very difficult to take one of your boot animations, decompile, modify, and recompile to work on mdpi? I'm not asking you to do it, but just if it's possible to do with an already created animation. Thanks.
*Great work. btw
Click to expand...
Click to collapse
A bootanimation is not an apk. It's just a zip with images, so you can't decompile, just extract and resize the pics.
I'm not saying you are allowed (that's not my word), but you can do it as easy as that.
@abhi0n0nakul would you mind if I include the qvga in my next theme? Giving proper credit your work & a link to the thread here?
Thanks for your consideration
antonio1475 said:
A bootanimation is not an apk. It's just a zip with images, so you can't decompile, just extract and resize the pics.
I'm not saying you are allowed (that's not my word), but you can do it as easy as that.
Click to expand...
Click to collapse
Even easier than I thought. Thanks for the info.
Sent from my HERO200 using XDA App
rfunderburk39 said:
@abhi0n0nakul would you mind if I include the qvga in my next theme? Giving proper credit your work & a link to the thread here?
Thanks for your consideration
Click to expand...
Click to collapse
yeah sure...
First of all THX!!!, could you make the bootanimation with the dots for qvga phones
Thank YOU
Welcome to Lightning Rom 5.0!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Standard Disclaimer: If you are flashing this rom, then you have already voided your warranty. I am not responsible for any damage this may cause to your phone.
Rom Features:
1. 2.11.605.9 Based
2. Sense 2.1
3. Imoseyon's Latest Kernel
4. Deodexed
5. Debloated
6. Zipaligned
7. Busybox and Superuser pre-installed
8. init.d support
9. Transparent Rosie
10. 5x5 App Drawer
11. Custom Rosie Dock
12. Right Button Remapped, use Launchkey(provided) to assign a task to the button
13. Custom themed SystemUI
14. Honeycomb style clock w/ accurate battery mod
15. Blue Theming (minimal for now, but will be made complete soon enough)
16. 7-in-1 Boot Mod
17. Smooth Scrolling App Drawer
How to Flash
1. Reboot into Recovery
2. MAKE A BACKUP!!!!!
3. Wipe all data/factory reset, wipe dalvik
4. Flash rom and reboot
5. Allow phone to settle a minute after reboot
Download
Lightning Rom 5.0.1
MD5: eed6b91d044b8db8e27b01dd621fb52b
The attachment will add in CRT animations. Forgot to zip it in...sorry lol
Add-ons
Sense 3.0 Lockscreen+MMS+Weather for LR 5.0.1: This will add the lock screen mms and weather from sense 3.0...This will, however, remove smooth scrolling from the app drawer and remove the themed dock (for now)
(link coming as soon as the dumb thing uploads)
NICE! Any way to get Sense 3.0 lock screen?
Changelog
Changelog for LR5.0
v5.0- Initial Rebuild and Revamp
v5.0.1- Fixed Weather FC, added CRT Animations, Changed screen transitions
Is this based on the new GB leak?
Sent from my ADR6400L using XDA Premium App
You could always try Agile Lock from the market. May be what you are looking for as far the lock ring lock screen.
sandman_nyc_316 said:
You could always try Agile Lock from the market. May be what you are looking for as far the lock ring lock screen.
Click to expand...
Click to collapse
It has the ring lock screen...just not all of the bells and whistles that go along with it. I will not be making a rom until I have the full RUU for the leak...once I get that, my rom will be based off that.
Got the full sense 3.0 lock screen cooked in and its uploading now.
anyone try flashing this? I downloaded it twice and flashed got error flashing
trikotret said:
anyone try flashing this? I downloaded it twice and flashed got error flashing
Click to expand...
Click to collapse
I flashed this just fine...you wipe fully before flashing?
dhemke17 said:
I flashed this just fine...you wipe fully before flashing?
Click to expand...
Click to collapse
yeah in cw. gave me an error abort. Both were downloaded through my phone the third time I am trying a file i donwloaded to my computer
trikotret said:
yeah in cw. gave me an error abort. Both were downloaded through my phone the third time I am trying a file i donwloaded to my computer
Click to expand...
Click to collapse
I might have jacked the damn updater script...gimme a second to look at it..
Yup...me in my genius misspelled print about 10 times via copy and paste in the updater script...will be uploaded soon...
dhemke17 said:
I might have jacked the damn updater script...gimme a second to look at it..
Click to expand...
Click to collapse
3rd is a charm. it says error in sdcard status 6. installation aborted
trikotret said:
3rd is a charm. it says error in sdcard status 6. installation aborted
Click to expand...
Click to collapse
just hold up for a little bit, i am uploading an updated version now...link will be down until fixed...its fixed, just going to take me about 30 minutes to upload.
Just made sure it would flash real quick...again...and now I am not going to touch it and am uploading it now.
link back up and it should be fixed...enjoy
setup doesnt work. I cant sign in gmail or market.
Really?! Wtf...
Sent from my ADR6400L using XDA App
trikotret said:
setup doesnt work. I cant sign in gmail or market.
Click to expand...
Click to collapse
What is it actually doing? You need to explain further if you want me to fix it.
EDIT: You left out that the market is missing. Thats kind of a problem...not that setup doesn't work. It will be fixed later.
I didn't wipe everything last night before flashing from LR4.2 and it didn't give me any problems. I wiped all data and reflashed and got an FC on Talk, FC on GooglePartnerSetup, and Vending.apk and GoogleServicesFramework.apk would not install...I fixed all of these issues with the uploaded rom. Sorry for my half-assedness last night...but it was like 1 in the AM lol so I was tired. Enjoy the fixed rom once its uploaded and please feel free to ask if you are having issues. Just be sure to ask in a manner that makes your problem known and not ask something like "Why is my phone is busted..."
dhemke17 said:
What is it actually doing? You need to explain further if you want me to fix it.
EDIT: You left out that the market is missing. Thats kind of a problem...not that setup doesn't work. It will be fixed later.
I didn't wipe everything last night before flashing from LR4.2 and it didn't give me any problems. I wiped all data and reflashed and got an FC on Talk, FC on GooglePartnerSetup, and Vending.apk and GoogleServicesFramework.apk would not install...I fixed all of these issues with the uploaded rom. Sorry for my half-assedness last night...but it was like 1 in the AM lol so I was tired. Enjoy the fixed rom once its uploaded and please feel free to ask if you are having issues. Just be sure to ask in a manner that makes your problem known and not ask something like "Why is my phone is busted..."
Click to expand...
Click to collapse
Its all good dude. Ill wait for it. The market icon was there. I clicked it but asked me to setup account. But doesnt take me anywhere. I clicked gmail and same thing. starts synching then stops
trikotret said:
Its all good dude. Ill wait for it. The market icon was there. I clicked it but asked me to setup account. But doesnt take me anywhere. I clicked gmail and same thing. starts synching then stops
Click to expand...
Click to collapse
Yea...about 5 more minutes...my internet at home uploads so damn slow!!!
Edit: up and running...
I am surprised. I installed this rom after a full wipe at 8:30 AM Central, and I had none of the problems that you got. Gmail, market all work fine for me. I just finished downloading a bunch of apps and setting them up as I need, so not going to bother getting the fixed version again!
tornadog said:
I am surprised. I installed this rom after a full wipe at 8:30 AM Central, and I had none of the problems that you got. Gmail, market all work fine for me. I just finished downloading a bunch of apps and setting them up as I need, so not going to bother getting the fixed version again!
Click to expand...
Click to collapse
Well good deal. I got the new one up at about 1130 Central Time...so you should be good to go.